diff mbox series

[v10,2/6] dt-bindings: display: bridge: Intel KeemBay DSI

Message ID 1604006877-20092-3-git-send-email-anitha.chrisanthus@intel.com
State New, archived
Headers show
Series Add support for KeemBay DRM driver | expand

Commit Message

Chrisanthus, Anitha Oct. 29, 2020, 9:27 p.m. UTC
This patch adds bindings for Intel KeemBay MIPI DSI

Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel@ffwll.ch>
---
 .../bindings/display/bridge/intel,keembay-dsi.yaml | 101 +++++++++++++++++++++
 1 file changed, 101 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml

Comments

Sam Ravnborg Oct. 29, 2020, 10:22 p.m. UTC | #1
Hi Anitha.

On Thu, Oct 29, 2020 at 02:27:53PM -0700, Anitha Chrisanthus wrote:
> This patch adds bindings for Intel KeemBay MIPI DSI
> 
> Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> Cc: Thomas Zimmermann <tzimmermann@suse.de>
> Cc: Daniel Vetter <daniel@ffwll.ch>

This again matches my understanding of the HW - good.

One small nit below, with that addressed:
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>

> ---
>  .../bindings/display/bridge/intel,keembay-dsi.yaml | 101 +++++++++++++++++++++
>  1 file changed, 101 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml
> new file mode 100644
> index 0000000..4cef64e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml
> @@ -0,0 +1,101 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/bridge/intel,keembay-dsi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Devicetree bindings for Intel Keem Bay mipi dsi controller
> +
> +maintainers:
> +  - Anitha Chrisanthus <anitha.chrisanthus@intel.com>
> +  - Edmond J Dea <edmund.j.dea@intel.com>
> +
> +properties:
> +  compatible:
> +    const: intel,keembay-dsi
> +
> +  reg:
> +    items:
> +      - description: MIPI registers range
> +
> +  reg-names:
> +    items:
> +      - const: mipi
> +
> +  clocks:
> +    items:
> +      - description: MIPI DSI clock
> +      - description: MIPI DSI econfig clock
> +      - description: MIPI DSI config clock
> +
> +  clock-names:
> +    items:
> +      - const: clk_mipi
> +      - const: clk_mipi_ecfg
> +      - const: clk_mipi_cfg
> +
> +  ports:
> +    type: object
> +
> +    properties:
> +      '#address-cells':
> +       const: 1
> +
> +      '#size-cells':
> +       const: 0
> +
> +      port@0:
> +        type: object
> +        description: MIPI DSI input port.
> +
> +      port@1:
> +        type: object
> +        description: DSI output port to adv7535.
Drop the mention of adv7535 - the DT decide what the port is connected
to.

> +
> +    required:
> +      - port@0
> +      - port@1
> +
> +    additionalProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - clocks
> +  - clock-names
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    mipi-dsi@20900000 {
> +        compatible = "intel,keembay-dsi";
> +        reg = <0x20900000 0x4000>;
> +        reg-names = "mipi";
> +        clocks = <&scmi_clk 0x86>,
> +                 <&scmi_clk 0x88>,
> +                 <&scmi_clk 0x89>;
> +        clock-names = "clk_mipi", "clk_mipi_ecfg",
> +                      "clk_mipi_cfg";
> +
> +        ports {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +
> +            port@0 {
> +                reg = <0>;
> +                dsi_in: endpoint {
> +                    remote-endpoint = <&disp_out>;
> +                };
> +            };
> +
> +            port@1 {
> +                reg = <1>;
> +                dsi_out: endpoint {
> +                    remote-endpoint = <&adv7535_input>;
> +                };
> +            };
> +        };
> +    };
> -- 
> 2.7.4
Neil Armstrong Oct. 30, 2020, 8:32 a.m. UTC | #2
On 29/10/2020 23:22, Sam Ravnborg wrote:
> Hi Anitha.
> 
> On Thu, Oct 29, 2020 at 02:27:53PM -0700, Anitha Chrisanthus wrote:
>> This patch adds bindings for Intel KeemBay MIPI DSI
>>
>> Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
>> Cc: Sam Ravnborg <sam@ravnborg.org>
>> Cc: Thomas Zimmermann <tzimmermann@suse.de>
>> Cc: Daniel Vetter <daniel@ffwll.ch>
> 
> This again matches my understanding of the HW - good.
> 
> One small nit below, with that addressed:
> Reviewed-by: Sam Ravnborg <sam@ravnborg.org>

Same, this one is good, Thanks.

Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>


> 
>> ---
>>  .../bindings/display/bridge/intel,keembay-dsi.yaml | 101 +++++++++++++++++++++
>>  1 file changed, 101 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml
>> new file mode 100644
>> index 0000000..4cef64e
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml
>> @@ -0,0 +1,101 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/display/bridge/intel,keembay-dsi.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Devicetree bindings for Intel Keem Bay mipi dsi controller
>> +
>> +maintainers:
>> +  - Anitha Chrisanthus <anitha.chrisanthus@intel.com>
>> +  - Edmond J Dea <edmund.j.dea@intel.com>
>> +
>> +properties:
>> +  compatible:
>> +    const: intel,keembay-dsi
>> +
>> +  reg:
>> +    items:
>> +      - description: MIPI registers range
>> +
>> +  reg-names:
>> +    items:
>> +      - const: mipi
>> +
>> +  clocks:
>> +    items:
>> +      - description: MIPI DSI clock
>> +      - description: MIPI DSI econfig clock
>> +      - description: MIPI DSI config clock
>> +
>> +  clock-names:
>> +    items:
>> +      - const: clk_mipi
>> +      - const: clk_mipi_ecfg
>> +      - const: clk_mipi_cfg
>> +
>> +  ports:
>> +    type: object
>> +
>> +    properties:
>> +      '#address-cells':
>> +       const: 1
>> +
>> +      '#size-cells':
>> +       const: 0
>> +
>> +      port@0:
>> +        type: object
>> +        description: MIPI DSI input port.
>> +
>> +      port@1:
>> +        type: object
>> +        description: DSI output port to adv7535.
> Drop the mention of adv7535 - the DT decide what the port is connected
> to.
> 
>> +
>> +    required:
>> +      - port@0
>> +      - port@1
>> +
>> +    additionalProperties: false
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +  - reg-names
>> +  - clocks
>> +  - clock-names
>> +  - ports
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +    mipi-dsi@20900000 {
>> +        compatible = "intel,keembay-dsi";
>> +        reg = <0x20900000 0x4000>;
>> +        reg-names = "mipi";
>> +        clocks = <&scmi_clk 0x86>,
>> +                 <&scmi_clk 0x88>,
>> +                 <&scmi_clk 0x89>;
>> +        clock-names = "clk_mipi", "clk_mipi_ecfg",
>> +                      "clk_mipi_cfg";
>> +
>> +        ports {
>> +            #address-cells = <1>;
>> +            #size-cells = <0>;
>> +
>> +            port@0 {
>> +                reg = <0>;
>> +                dsi_in: endpoint {
>> +                    remote-endpoint = <&disp_out>;
>> +                };
>> +            };
>> +
>> +            port@1 {
>> +                reg = <1>;
>> +                dsi_out: endpoint {
>> +                    remote-endpoint = <&adv7535_input>;
>> +                };
>> +            };
>> +        };
>> +    };
>> -- 
>> 2.7.4
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml
new file mode 100644
index 0000000..4cef64e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml
@@ -0,0 +1,101 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/intel,keembay-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Devicetree bindings for Intel Keem Bay mipi dsi controller
+
+maintainers:
+  - Anitha Chrisanthus <anitha.chrisanthus@intel.com>
+  - Edmond J Dea <edmund.j.dea@intel.com>
+
+properties:
+  compatible:
+    const: intel,keembay-dsi
+
+  reg:
+    items:
+      - description: MIPI registers range
+
+  reg-names:
+    items:
+      - const: mipi
+
+  clocks:
+    items:
+      - description: MIPI DSI clock
+      - description: MIPI DSI econfig clock
+      - description: MIPI DSI config clock
+
+  clock-names:
+    items:
+      - const: clk_mipi
+      - const: clk_mipi_ecfg
+      - const: clk_mipi_cfg
+
+  ports:
+    type: object
+
+    properties:
+      '#address-cells':
+       const: 1
+
+      '#size-cells':
+       const: 0
+
+      port@0:
+        type: object
+        description: MIPI DSI input port.
+
+      port@1:
+        type: object
+        description: DSI output port to adv7535.
+
+    required:
+      - port@0
+      - port@1
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    mipi-dsi@20900000 {
+        compatible = "intel,keembay-dsi";
+        reg = <0x20900000 0x4000>;
+        reg-names = "mipi";
+        clocks = <&scmi_clk 0x86>,
+                 <&scmi_clk 0x88>,
+                 <&scmi_clk 0x89>;
+        clock-names = "clk_mipi", "clk_mipi_ecfg",
+                      "clk_mipi_cfg";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                dsi_in: endpoint {
+                    remote-endpoint = <&disp_out>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                dsi_out: endpoint {
+                    remote-endpoint = <&adv7535_input>;
+                };
+            };
+        };
+    };