| Message ID | 1608199173-28760-7-git-send-email-victor.liu@nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add some DRM bridge drivers support for i.MX8qm/qxp SoCs | expand |
On Thu, Dec 17, 2020 at 05:59:25PM +0800, Liu Ying wrote: > This patch adds bindings for i.MX8qm/qxp display pixel link. > > Signed-off-by: Liu Ying <victor.liu@nxp.com> > --- > .../display/bridge/fsl,imx8qxp-pixel-link.yaml | 128 +++++++++++++++++++++ > 1 file changed, 128 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml > > diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml > new file mode 100644 > index 00000000..fd24a0e > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml > @@ -0,0 +1,128 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-pixel-link.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Freescale i.MX8qm/qxp Display Pixel Link > + > +maintainers: > + - Liu Ying <victor.liu@nxp.com> > + > +description: | > + The Freescale i.MX8qm/qxp Display Pixel Link(DPL) forms a standard > + asynchronous linkage between pixel sources(display controller or > + camera module) and pixel consumers(imaging or displays). > + It consists of two distinct functions, a pixel transfer function and a > + control interface. Multiple pixel channels can exist per one control channel. > + This binding documentation is only for pixel links whose pixel sources are > + display controllers. Perhaps some information about how this 'device' is accessed because you have no control interface. > + > +properties: > + compatible: > + enum: > + - fsl,imx8qm-dc-pixel-link > + - fsl,imx8qxp-dc-pixel-link > + > + ports: > + type: object > + description: | > + A node containing pixel link input & output port nodes with endpoint > + definitions as documented in > + Documentation/devicetree/bindings/media/video-interfaces.txt > + Documentation/devicetree/bindings/graph.txt > + > + properties: > + '#address-cells': > + const: 1 > + > + '#size-cells': > + const: 0 > + > + port@0: > + type: object > + description: The pixel link input port node from upstream video source. > + > + properties: > + reg: > + const: 0 > + > + required: > + - reg You can drop 'reg' parts. > + > + patternProperties: > + "^port@[1-4]$": > + type: object > + description: The pixel link output port node to downstream bridge. > + > + properties: > + reg: > + enum: [ 1, 2, 3, 4 ] > + > + required: > + - reg > + > + required: > + - "#address-cells" > + - "#size-cells" > + - port@0 > + > + anyOf: > + - required: > + - port@1 > + - required: > + - port@2 > + - required: > + - port@3 > + - required: > + - port@4 > + > + additionalProperties: false > + > +required: > + - compatible > + - ports > + > +additionalProperties: false > + > +examples: > + - | > + dc0-pixel-link0 { > + compatible = "fsl,imx8qxp-dc-pixel-link"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + /* from dc0 pixel combiner channel0 */ > + port@0 { > + reg = <0>; > + > + dc0_pixel_link0_dc0_pixel_combiner_ch0: endpoint { > + remote-endpoint = <&dc0_pixel_combiner_ch0_dc0_pixel_link0>; > + }; > + }; > + > + /* to PXL2DPIs in MIPI/LVDS combo subsystems */ > + port@1 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <1>; > + > + dc0_pixel_link0_mipi_lvds_0_pxl2dpi: endpoint@0 { > + reg = <0>; > + remote-endpoint = <&mipi_lvds_0_pxl2dpi_dc0_pixel_link0>; > + }; > + > + dc0_pixel_link0_mipi_lvds_1_pxl2dpi: endpoint@1 { > + reg = <1>; > + remote-endpoint = <&mipi_lvds_1_pxl2dpi_dc0_pixel_link0>; > + }; > + }; > + > + /* to imaging subsystem */ > + port@4 { > + reg = <4>; > + }; > + }; > + }; > -- > 2.7.4 >
On Mon, 2020-12-21 at 15:31 -0700, Rob Herring wrote: > On Thu, Dec 17, 2020 at 05:59:25PM +0800, Liu Ying wrote: > > This patch adds bindings for i.MX8qm/qxp display pixel link. > > > > Signed-off-by: Liu Ying <victor.liu@nxp.com> > > --- > > .../display/bridge/fsl,imx8qxp-pixel-link.yaml | 128 +++++++++++++++++++++ > > 1 file changed, 128 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml > > > > diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml > > new file mode 100644 > > index 00000000..fd24a0e > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml > > @@ -0,0 +1,128 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevicetree.org%2Fschemas%2Fdisplay%2Fbridge%2Ffsl%2Cimx8qxp-pixel-link.yaml%23&data=04%7C01%7Cvictor.liu%40nxp.com%7C2c8f001f28de46450bba08d8a60032d5%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637441867070310997%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=Qg5M4UJqHKJy5W4%2FB2hOpeEu8mHtp8rXcyN35TCUukw%3D&reserved=0 > > +$schema: https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevicetree.org%2Fmeta-schemas%2Fcore.yaml%23&data=04%7C01%7Cvictor.liu%40nxp.com%7C2c8f001f28de46450bba08d8a60032d5%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637441867070310997%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=Zjvx9NBDFvqBxXqJItSP6smPdWsQUFYssJpNyVr48uE%3D&reserved=0 > > + > > +title: Freescale i.MX8qm/qxp Display Pixel Link > > + > > +maintainers: > > + - Liu Ying <victor.liu@nxp.com> > > + > > +description: | > > + The Freescale i.MX8qm/qxp Display Pixel Link(DPL) forms a standard > > + asynchronous linkage between pixel sources(display controller or > > + camera module) and pixel consumers(imaging or displays). > > + It consists of two distinct functions, a pixel transfer function and a > > + control interface. Multiple pixel channels can exist per one control channel. > > + This binding documentation is only for pixel links whose pixel sources are > > + display controllers. > > Perhaps some information about how this 'device' is accessed because you > have no control interface. The i.MX8qm/qxp Display Pixel Link is controlled by SCU firmare. Will add the information. > > > + > > +properties: > > + compatible: > > + enum: > > + - fsl,imx8qm-dc-pixel-link > > + - fsl,imx8qxp-dc-pixel-link > > + > > + ports: > > + type: object > > + description: | > > + A node containing pixel link input & output port nodes with endpoint > > + definitions as documented in > > + Documentation/devicetree/bindings/media/video-interfaces.txt > > + Documentation/devicetree/bindings/graph.txt > > + > > + properties: > > + '#address-cells': > > + const: 1 > > + > > + '#size-cells': > > + const: 0 > > + > > + port@0: > > + type: object > > + description: The pixel link input port node from upstream video source. > > + > > + properties: > > + reg: > > + const: 0 > > + > > + required: > > + - reg > > You can drop 'reg' parts. Will drop the 'required' parts for 'reg'. Also, will drop the '#address-cells' and '#size-cells' parts if no objections. Thanks, Liu Ying > > > + > > + patternProperties: > > + "^port@[1-4]$": > > + type: object > > + description: The pixel link output port node to downstream bridge. > > + > > + properties: > > + reg: > > + enum: [ 1, 2, 3, 4 ] > > + > > + required: > > + - reg > > + > > + required: > > + - "#address-cells" > > + - "#size-cells" > > + - port@0 > > + > > + anyOf: > > + - required: > > + - port@1 > > + - required: > > + - port@2 > > + - required: > > + - port@3 > > + - required: > > + - port@4 > > + > > + additionalProperties: false > > + > > +required: > > + - compatible > > + - ports > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + dc0-pixel-link0 { > > + compatible = "fsl,imx8qxp-dc-pixel-link"; > > + > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + /* from dc0 pixel combiner channel0 */ > > + port@0 { > > + reg = <0>; > > + > > + dc0_pixel_link0_dc0_pixel_combiner_ch0: endpoint { > > + remote-endpoint = <&dc0_pixel_combiner_ch0_dc0_pixel_link0>; > > + }; > > + }; > > + > > + /* to PXL2DPIs in MIPI/LVDS combo subsystems */ > > + port@1 { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + reg = <1>; > > + > > + dc0_pixel_link0_mipi_lvds_0_pxl2dpi: endpoint@0 { > > + reg = <0>; > > + remote-endpoint = <&mipi_lvds_0_pxl2dpi_dc0_pixel_link0>; > > + }; > > + > > + dc0_pixel_link0_mipi_lvds_1_pxl2dpi: endpoint@1 { > > + reg = <1>; > > + remote-endpoint = <&mipi_lvds_1_pxl2dpi_dc0_pixel_link0>; > > + }; > > + }; > > + > > + /* to imaging subsystem */ > > + port@4 { > > + reg = <4>; > > + }; > > + }; > > + }; > > -- > > 2.7.4 > >
Hi Liu, Thank you for the patch. On Thu, Dec 17, 2020 at 05:59:25PM +0800, Liu Ying wrote: > This patch adds bindings for i.MX8qm/qxp display pixel link. > > Signed-off-by: Liu Ying <victor.liu@nxp.com> > --- > .../display/bridge/fsl,imx8qxp-pixel-link.yaml | 128 +++++++++++++++++++++ > 1 file changed, 128 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml > > diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml > new file mode 100644 > index 00000000..fd24a0e > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml > @@ -0,0 +1,128 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-pixel-link.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Freescale i.MX8qm/qxp Display Pixel Link > + > +maintainers: > + - Liu Ying <victor.liu@nxp.com> > + > +description: | > + The Freescale i.MX8qm/qxp Display Pixel Link(DPL) forms a standard > + asynchronous linkage between pixel sources(display controller or > + camera module) and pixel consumers(imaging or displays). > + It consists of two distinct functions, a pixel transfer function and a > + control interface. Multiple pixel channels can exist per one control channel. > + This binding documentation is only for pixel links whose pixel sources are > + display controllers. > + > +properties: > + compatible: > + enum: > + - fsl,imx8qm-dc-pixel-link > + - fsl,imx8qxp-dc-pixel-link > + > + ports: > + type: object > + description: | > + A node containing pixel link input & output port nodes with endpoint > + definitions as documented in > + Documentation/devicetree/bindings/media/video-interfaces.txt > + Documentation/devicetree/bindings/graph.txt With Rob's patch that convert both of these to YAML, I think you can drop the references to these documents, and use $ref: /schemas/graph.yaml#/properties/ports in the ports node, and $ref: /schemas/graph.yaml#/$defs/port-base unevaluatedProperties: false in the port nodes, dropping the type property. You will also be able to drop additionalProperties: false for the ports node. > + > + properties: > + '#address-cells': > + const: 1 > + > + '#size-cells': > + const: 0 > + > + port@0: > + type: object > + description: The pixel link input port node from upstream video source. > + > + properties: > + reg: > + const: 0 > + > + required: > + - reg > + > + patternProperties: > + "^port@[1-4]$": > + type: object > + description: The pixel link output port node to downstream bridge. > + > + properties: > + reg: > + enum: [ 1, 2, 3, 4 ] > + > + required: > + - reg > + > + required: > + - "#address-cells" > + - "#size-cells" > + - port@0 > + > + anyOf: > + - required: > + - port@1 > + - required: > + - port@2 > + - required: > + - port@3 > + - required: > + - port@4 Do all DPL instances have four output ports ? If so I would make all of them mandatory, as they describe the hardware. They can be left without any endpoing if they're not connected to anything. > + > + additionalProperties: false > + > +required: > + - compatible > + - ports > + > +additionalProperties: false > + > +examples: > + - | > + dc0-pixel-link0 { > + compatible = "fsl,imx8qxp-dc-pixel-link"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + /* from dc0 pixel combiner channel0 */ > + port@0 { > + reg = <0>; > + > + dc0_pixel_link0_dc0_pixel_combiner_ch0: endpoint { > + remote-endpoint = <&dc0_pixel_combiner_ch0_dc0_pixel_link0>; > + }; > + }; > + > + /* to PXL2DPIs in MIPI/LVDS combo subsystems */ > + port@1 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <1>; > + > + dc0_pixel_link0_mipi_lvds_0_pxl2dpi: endpoint@0 { > + reg = <0>; > + remote-endpoint = <&mipi_lvds_0_pxl2dpi_dc0_pixel_link0>; > + }; > + > + dc0_pixel_link0_mipi_lvds_1_pxl2dpi: endpoint@1 { > + reg = <1>; > + remote-endpoint = <&mipi_lvds_1_pxl2dpi_dc0_pixel_link0>; > + }; > + }; > + > + /* to imaging subsystem */ > + port@4 { > + reg = <4>; > + }; > + }; > + };
Hi, On Tue, 2020-12-22 at 09:09 +0200, Laurent Pinchart wrote: > Hi Liu, > > Thank you for the patch. > > On Thu, Dec 17, 2020 at 05:59:25PM +0800, Liu Ying wrote: > > This patch adds bindings for i.MX8qm/qxp display pixel link. > > > > Signed-off-by: Liu Ying <victor.liu@nxp.com> > > --- > > .../display/bridge/fsl,imx8qxp-pixel-link.yaml | 128 +++++++++++++++++++++ > > 1 file changed, 128 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml > > > > diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml > > new file mode 100644 > > index 00000000..fd24a0e > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml > > @@ -0,0 +1,128 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevicetree.org%2Fschemas%2Fdisplay%2Fbridge%2Ffsl%2Cimx8qxp-pixel-link.yaml%23&data=04%7C01%7Cvictor.liu%40nxp.com%7C2a48e2bf99364191d8c508d8a6487e41%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637442177591124452%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=T0GTZ7sjDeVGb52%2Bo4V%2BgL5FZ0OVbJcf95F5fqzm9tg%3D&reserved=0 > > +$schema: https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevicetree.org%2Fmeta-schemas%2Fcore.yaml%23&data=04%7C01%7Cvictor.liu%40nxp.com%7C2a48e2bf99364191d8c508d8a6487e41%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637442177591124452%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=k0gxlP9o6T1AORaXXGH9fW5o9EeOTFGPAEDjoltrEuQ%3D&reserved=0 > > + > > +title: Freescale i.MX8qm/qxp Display Pixel Link > > + > > +maintainers: > > + - Liu Ying <victor.liu@nxp.com> > > + > > +description: | > > + The Freescale i.MX8qm/qxp Display Pixel Link(DPL) forms a standard > > + asynchronous linkage between pixel sources(display controller or > > + camera module) and pixel consumers(imaging or displays). > > + It consists of two distinct functions, a pixel transfer function and a > > + control interface. Multiple pixel channels can exist per one control channel. > > + This binding documentation is only for pixel links whose pixel sources are > > + display controllers. > > + > > +properties: > > + compatible: > > + enum: > > + - fsl,imx8qm-dc-pixel-link > > + - fsl,imx8qxp-dc-pixel-link > > + > > + ports: > > + type: object > > + description: | > > + A node containing pixel link input & output port nodes with endpoint > > + definitions as documented in > > + Documentation/devicetree/bindings/media/video-interfaces.txt > > + Documentation/devicetree/bindings/graph.txt > > With Rob's patch that convert both of these to YAML, I think you can > drop the references to these documents, and use > > $ref: /schemas/graph.yaml#/properties/ports > > in the ports node, and > > $ref: /schemas/graph.yaml#/$defs/port-base > unevaluatedProperties: false > > in the port nodes, dropping the type property. You will also be able to > drop > > additionalProperties: false > > for the ports node. Thanks for the suggestion. Rob looked this binding and provided some comments without requiring to reference the new graph.yaml. Rob, do you think it is needed for now? > > > + > > + properties: > > + '#address-cells': > > + const: 1 > > + > > + '#size-cells': > > + const: 0 > > + > > + port@0: > > + type: object > > + description: The pixel link input port node from upstream video source. > > + > > + properties: > > + reg: > > + const: 0 > > + > > + required: > > + - reg > > + > > + patternProperties: > > + "^port@[1-4]$": > > + type: object > > + description: The pixel link output port node to downstream bridge. > > + > > + properties: > > + reg: > > + enum: [ 1, 2, 3, 4 ] > > + > > + required: > > + - reg > > + > > + required: > > + - "#address-cells" > > + - "#size-cells" > > + - port@0 > > + > > + anyOf: > > + - required: > > + - port@1 > > + - required: > > + - port@2 > > + - required: > > + - port@3 > > + - required: > > + - port@4 > > Do all DPL instances have four output ports ? If so I would make all of > them mandatory, as they describe the hardware. They can be left without > any endpoing if they're not connected to anything. Yes, I think all DPL instances have 4 output ports and some don't connect to anything. I'll require all of them in the next version. Thanks, Liu Ying > > > + > > + additionalProperties: false > > + > > +required: > > + - compatible > > + - ports > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + dc0-pixel-link0 { > > + compatible = "fsl,imx8qxp-dc-pixel-link"; > > + > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + /* from dc0 pixel combiner channel0 */ > > + port@0 { > > + reg = <0>; > > + > > + dc0_pixel_link0_dc0_pixel_combiner_ch0: endpoint { > > + remote-endpoint = <&dc0_pixel_combiner_ch0_dc0_pixel_link0>; > > + }; > > + }; > > + > > + /* to PXL2DPIs in MIPI/LVDS combo subsystems */ > > + port@1 { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + reg = <1>; > > + > > + dc0_pixel_link0_mipi_lvds_0_pxl2dpi: endpoint@0 { > > + reg = <0>; > > + remote-endpoint = <&mipi_lvds_0_pxl2dpi_dc0_pixel_link0>; > > + }; > > + > > + dc0_pixel_link0_mipi_lvds_1_pxl2dpi: endpoint@1 { > > + reg = <1>; > > + remote-endpoint = <&mipi_lvds_1_pxl2dpi_dc0_pixel_link0>; > > + }; > > + }; > > + > > + /* to imaging subsystem */ > > + port@4 { > > + reg = <4>; > > + }; > > + }; > > + };
diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml new file mode 100644 index 00000000..fd24a0e --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml @@ -0,0 +1,128 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-pixel-link.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qm/qxp Display Pixel Link + +maintainers: + - Liu Ying <victor.liu@nxp.com> + +description: | + The Freescale i.MX8qm/qxp Display Pixel Link(DPL) forms a standard + asynchronous linkage between pixel sources(display controller or + camera module) and pixel consumers(imaging or displays). + It consists of two distinct functions, a pixel transfer function and a + control interface. Multiple pixel channels can exist per one control channel. + This binding documentation is only for pixel links whose pixel sources are + display controllers. + +properties: + compatible: + enum: + - fsl,imx8qm-dc-pixel-link + - fsl,imx8qxp-dc-pixel-link + + ports: + type: object + description: | + A node containing pixel link input & output port nodes with endpoint + definitions as documented in + Documentation/devicetree/bindings/media/video-interfaces.txt + Documentation/devicetree/bindings/graph.txt + + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + port@0: + type: object + description: The pixel link input port node from upstream video source. + + properties: + reg: + const: 0 + + required: + - reg + + patternProperties: + "^port@[1-4]$": + type: object + description: The pixel link output port node to downstream bridge. + + properties: + reg: + enum: [ 1, 2, 3, 4 ] + + required: + - reg + + required: + - "#address-cells" + - "#size-cells" + - port@0 + + anyOf: + - required: + - port@1 + - required: + - port@2 + - required: + - port@3 + - required: + - port@4 + + additionalProperties: false + +required: + - compatible + - ports + +additionalProperties: false + +examples: + - | + dc0-pixel-link0 { + compatible = "fsl,imx8qxp-dc-pixel-link"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* from dc0 pixel combiner channel0 */ + port@0 { + reg = <0>; + + dc0_pixel_link0_dc0_pixel_combiner_ch0: endpoint { + remote-endpoint = <&dc0_pixel_combiner_ch0_dc0_pixel_link0>; + }; + }; + + /* to PXL2DPIs in MIPI/LVDS combo subsystems */ + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + dc0_pixel_link0_mipi_lvds_0_pxl2dpi: endpoint@0 { + reg = <0>; + remote-endpoint = <&mipi_lvds_0_pxl2dpi_dc0_pixel_link0>; + }; + + dc0_pixel_link0_mipi_lvds_1_pxl2dpi: endpoint@1 { + reg = <1>; + remote-endpoint = <&mipi_lvds_1_pxl2dpi_dc0_pixel_link0>; + }; + }; + + /* to imaging subsystem */ + port@4 { + reg = <4>; + }; + }; + };
This patch adds bindings for i.MX8qm/qxp display pixel link. Signed-off-by: Liu Ying <victor.liu@nxp.com> --- .../display/bridge/fsl,imx8qxp-pixel-link.yaml | 128 +++++++++++++++++++++ 1 file changed, 128 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml