| Message ID | 1616662832-27048-3-git-send-email-victor.liu@nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | phy: phy-fsl-imx8-mipi-dphy: Add i.MX8qxp LVDS PHY mode support | expand |
Hi, On 25/03/21 2:30 pm, Liu Ying wrote: > This patch allows LVDS PHYs to be configured through > the generic functions and through a custom structure > added to the generic union. > > The parameters added here are based on common LVDS PHY > implementation practices. The set of parameters > should cover all potential users. > > Cc: Kishon Vijay Abraham I <kishon@ti.com> > Cc: Vinod Koul <vkoul@kernel.org> > Cc: NXP Linux Team <linux-imx@nxp.com> > Signed-off-by: Liu Ying <victor.liu@nxp.com> > --- > v4->v5: > * Align kernel-doc style to include/linux/phy/phy.h. (Vinod) > * Trivial tweaks. > * Drop Robert's R-b tag. > > v3->v4: > * Add Robert's R-b tag. > > v2->v3: > * No change. > > v1->v2: > * No change. > > include/linux/phy/phy-lvds.h | 32 ++++++++++++++++++++++++++++++++ > include/linux/phy/phy.h | 4 ++++ > 2 files changed, 36 insertions(+) > create mode 100644 include/linux/phy/phy-lvds.h > > diff --git a/include/linux/phy/phy-lvds.h b/include/linux/phy/phy-lvds.h > new file mode 100644 > index 00000000..7a2f474 > --- /dev/null > +++ b/include/linux/phy/phy-lvds.h > @@ -0,0 +1,32 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +/* > + * Copyright 2020 NXP > + */ > + > +#ifndef __PHY_LVDS_H_ > +#define __PHY_LVDS_H_ > + > +/** > + * struct phy_configure_opts_lvds - LVDS configuration set > + * @bits_per_lane_and_dclk_cycle: Number of bits per data lane and > + * differential clock cycle. phy_set_bus_width() instead? > + * @differential_clk_rate: Clock rate, in Hertz, of the LVDS > + * differential clock. Please use clk API's to get rate. > + * @lanes: Number of active, consecutive, > + * data lanes, starting from lane 0, > + * used for the transmissions. > + * @is_slave: Boolean, true if the phy is a slave > + * which works together with a master > + * phy to support dual link transmission, > + * otherwise a regular phy or a master phy. For parameters that are known at design time, it doesn't have to be passed from consumer driver. So all these parameters do they really have to be passed at runtime? Thanks Kishon > + * > + * This structure is used to represent the configuration state of a LVDS phy. > + */ > +struct phy_configure_opts_lvds { > + unsigned int bits_per_lane_and_dclk_cycle; > + unsigned long differential_clk_rate; > + unsigned int lanes; > + bool is_slave; > +}; > + > +#endif /* __PHY_LVDS_H_ */ > diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h > index e435bdb..d450b44 100644 > --- a/include/linux/phy/phy.h > +++ b/include/linux/phy/phy.h > @@ -17,6 +17,7 @@ > #include <linux/regulator/consumer.h> > > #include <linux/phy/phy-dp.h> > +#include <linux/phy/phy-lvds.h> > #include <linux/phy/phy-mipi-dphy.h> > > struct phy; > @@ -51,10 +52,13 @@ enum phy_mode { > * the MIPI_DPHY phy mode. > * @dp: Configuration set applicable for phys supporting > * the DisplayPort protocol. > + * @lvds: Configuration set applicable for phys supporting > + * the LVDS phy mode. > */ > union phy_configure_opts { > struct phy_configure_opts_mipi_dphy mipi_dphy; > struct phy_configure_opts_dp dp; > + struct phy_configure_opts_lvds lvds; > }; > > /** >
Hi Kishon, First of all, thanks for your review. On Wed, 2021-03-31 at 19:02 +0530, Kishon Vijay Abraham I wrote: > Hi, > > On 25/03/21 2:30 pm, Liu Ying wrote: > > This patch allows LVDS PHYs to be configured through > > the generic functions and through a custom structure > > added to the generic union. > > > > The parameters added here are based on common LVDS PHY > > implementation practices. The set of parameters > > should cover all potential users. > > > > Cc: Kishon Vijay Abraham I <kishon@ti.com> > > Cc: Vinod Koul <vkoul@kernel.org> > > Cc: NXP Linux Team <linux-imx@nxp.com> > > Signed-off-by: Liu Ying <victor.liu@nxp.com> > > --- > > v4->v5: > > * Align kernel-doc style to include/linux/phy/phy.h. (Vinod) > > * Trivial tweaks. > > * Drop Robert's R-b tag. > > > > v3->v4: > > * Add Robert's R-b tag. > > > > v2->v3: > > * No change. > > > > v1->v2: > > * No change. > > > > include/linux/phy/phy-lvds.h | 32 ++++++++++++++++++++++++++++++++ > > include/linux/phy/phy.h | 4 ++++ > > 2 files changed, 36 insertions(+) > > create mode 100644 include/linux/phy/phy-lvds.h > > > > diff --git a/include/linux/phy/phy-lvds.h b/include/linux/phy/phy-lvds.h > > new file mode 100644 > > index 00000000..7a2f474 > > --- /dev/null > > +++ b/include/linux/phy/phy-lvds.h > > @@ -0,0 +1,32 @@ > > +/* SPDX-License-Identifier: GPL-2.0 */ > > +/* > > + * Copyright 2020 NXP > > + */ > > + > > +#ifndef __PHY_LVDS_H_ > > +#define __PHY_LVDS_H_ > > + > > +/** > > + * struct phy_configure_opts_lvds - LVDS configuration set > > + * @bits_per_lane_and_dclk_cycle: Number of bits per data lane and > > + * differential clock cycle. > > phy_set_bus_width() instead? This member aims to configure the number of bits transmitted during a period of time(a clock cycle). It doesn't sound like a concept of 'bus width'? > > + * @differential_clk_rate: Clock rate, in Hertz, of the LVDS > > + * differential clock. > > Please use clk API's to get rate. I like your idea. But, this rate is likely runtime-configurable, e.g., a LVDS to HDMI chip is connected. It seems that there is no appropriate driver to set the rate by calling clk_set_rate() then? > > + * @lanes: Number of active, consecutive, > > + * data lanes, starting from lane 0, > > + * used for the transmissions. > > + * @is_slave: Boolean, true if the phy is a slave > > + * which works together with a master > > + * phy to support dual link transmission, > > + * otherwise a regular phy or a master phy. > > For parameters that are known at design time, it doesn't have to be > passed from consumer driver. So all these parameters do they really have > to be passed at runtime? Yes for all, perhaps. Details below: 1) bits_per_lane_and_dclk_cycle i.MX8qxp LVDS phy can only do 7, while i.MX8qm LVDS phy(a different IP) can do either 7 or 10(configurable by setting a phy register). 2) differential_clk_rate It's likely runtime-configurable, as I mentioned above. 3) lanes The higher color depth is, the more lanes are used: RGB666 - 3 lanes RGB888 - 4 lanes RGB101010 - 5 lanes That means a phy with 5 lanes(like i.MX8qm LVDS phy) support up to the 3 types of RGB pixels. Though the i.MX LVDS phys don't have any register to configure the lanes to be used, it would be good to define it for phy_validate() or other potential phys? 4) is_slave Any i.MX8qxp LVDS phy instance can act as a regular phy or a master phy or a slave phy. Changing mode at runtime is probably unneeded. But, it's difficult for the phy driver to get the mode from device tree(see drm_of_lvds_get_port_pixels_type()), I think. Export an i.MX8qxp LVDS phy specific function to set this instead? Regards, Liu Ying > > Thanks > Kishon > > + * > > + * This structure is used to represent the configuration state of a LVDS phy. > > + */ > > +struct phy_configure_opts_lvds { > > + unsigned int bits_per_lane_and_dclk_cycle; > > + unsigned long differential_clk_rate; > > + unsigned int lanes; > > + bool is_slave; > > +}; > > + > > +#endif /* __PHY_LVDS_H_ */ > > diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h > > index e435bdb..d450b44 100644 > > --- a/include/linux/phy/phy.h > > +++ b/include/linux/phy/phy.h > > @@ -17,6 +17,7 @@ > > #include <linux/regulator/consumer.h> > > > > #include <linux/phy/phy-dp.h> > > +#include <linux/phy/phy-lvds.h> > > #include <linux/phy/phy-mipi-dphy.h> > > > > struct phy; > > @@ -51,10 +52,13 @@ enum phy_mode { > > * the MIPI_DPHY phy mode. > > * @dp: Configuration set applicable for phys supporting > > * the DisplayPort protocol. > > + * @lvds: Configuration set applicable for phys supporting > > + * the LVDS phy mode. > > */ > > union phy_configure_opts { > > struct phy_configure_opts_mipi_dphy mipi_dphy; > > struct phy_configure_opts_dp dp; > > + struct phy_configure_opts_lvds lvds; > > }; > > > > /** > >
Hi Kishon, Vinod, Any follow-up comments/suggestions based on my previous reply? Or, perhaps, just keep the patch as-is to support the generic lvds phy configuration structure? Thanks, Liu Ying On Thu, 2021-04-01 at 16:36 +0800, Liu Ying wrote: > Hi Kishon, > > First of all, thanks for your review. > > On Wed, 2021-03-31 at 19:02 +0530, Kishon Vijay Abraham I wrote: > > Hi, > > > > On 25/03/21 2:30 pm, Liu Ying wrote: > > > This patch allows LVDS PHYs to be configured through > > > the generic functions and through a custom structure > > > added to the generic union. > > > > > > The parameters added here are based on common LVDS PHY > > > implementation practices. The set of parameters > > > should cover all potential users. > > > > > > Cc: Kishon Vijay Abraham I <kishon@ti.com> > > > Cc: Vinod Koul <vkoul@kernel.org> > > > Cc: NXP Linux Team <linux-imx@nxp.com> > > > Signed-off-by: Liu Ying <victor.liu@nxp.com> > > > --- > > > v4->v5: > > > * Align kernel-doc style to include/linux/phy/phy.h. (Vinod) > > > * Trivial tweaks. > > > * Drop Robert's R-b tag. > > > > > > v3->v4: > > > * Add Robert's R-b tag. > > > > > > v2->v3: > > > * No change. > > > > > > v1->v2: > > > * No change. > > > > > > include/linux/phy/phy-lvds.h | 32 ++++++++++++++++++++++++++++++++ > > > include/linux/phy/phy.h | 4 ++++ > > > 2 files changed, 36 insertions(+) > > > create mode 100644 include/linux/phy/phy-lvds.h > > > > > > diff --git a/include/linux/phy/phy-lvds.h b/include/linux/phy/phy-lvds.h > > > new file mode 100644 > > > index 00000000..7a2f474 > > > --- /dev/null > > > +++ b/include/linux/phy/phy-lvds.h > > > @@ -0,0 +1,32 @@ > > > +/* SPDX-License-Identifier: GPL-2.0 */ > > > +/* > > > + * Copyright 2020 NXP > > > + */ > > > + > > > +#ifndef __PHY_LVDS_H_ > > > +#define __PHY_LVDS_H_ > > > + > > > +/** > > > + * struct phy_configure_opts_lvds - LVDS configuration set > > > + * @bits_per_lane_and_dclk_cycle: Number of bits per data lane and > > > + * differential clock cycle. > > > > phy_set_bus_width() instead? > > This member aims to configure the number of bits transmitted during a > period of time(a clock cycle). It doesn't sound like a concept of 'bus > width'? > > > > + * @differential_clk_rate: Clock rate, in Hertz, of the LVDS > > > + * differential clock. > > > > Please use clk API's to get rate. > > I like your idea. But, this rate is likely runtime-configurable, e.g., > a LVDS to HDMI chip is connected. It seems that there is no appropriate > driver to set the rate by calling clk_set_rate() then? > > > > + * @lanes: Number of active, consecutive, > > > + * data lanes, starting from lane 0, > > > + * used for the transmissions. > > > + * @is_slave: Boolean, true if the phy is a slave > > > + * which works together with a master > > > + * phy to support dual link transmission, > > > + * otherwise a regular phy or a master phy. > > > > For parameters that are known at design time, it doesn't have to be > > passed from consumer driver. So all these parameters do they really have > > to be passed at runtime? > > Yes for all, perhaps. Details below: > > 1) bits_per_lane_and_dclk_cycle > i.MX8qxp LVDS phy can only do 7, while i.MX8qm LVDS phy(a different IP) > can do either 7 or 10(configurable by setting a phy register). > > 2) differential_clk_rate > It's likely runtime-configurable, as I mentioned above. > > 3) lanes > The higher color depth is, the more lanes are used: > RGB666 - 3 lanes > RGB888 - 4 lanes > RGB101010 - 5 lanes > > That means a phy with 5 lanes(like i.MX8qm LVDS phy) support up to the > 3 types of RGB pixels. > > Though the i.MX LVDS phys don't have any register to configure the > lanes to be used, it would be good to define it for phy_validate() or > other potential phys? > > 4) is_slave > Any i.MX8qxp LVDS phy instance can act as a regular phy or a master phy > or a slave phy. Changing mode at runtime is probably unneeded. But, > it's difficult for the phy driver to get the mode from device tree(see > drm_of_lvds_get_port_pixels_type()), I think. Export an i.MX8qxp LVDS > phy specific function to set this instead? > > Regards, > Liu Ying > > > Thanks > > Kishon > > > + * > > > + * This structure is used to represent the configuration state of a LVDS phy. > > > + */ > > > +struct phy_configure_opts_lvds { > > > + unsigned int bits_per_lane_and_dclk_cycle; > > > + unsigned long differential_clk_rate; > > > + unsigned int lanes; > > > + bool is_slave; > > > +}; > > > + > > > +#endif /* __PHY_LVDS_H_ */ > > > diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h > > > index e435bdb..d450b44 100644 > > > --- a/include/linux/phy/phy.h > > > +++ b/include/linux/phy/phy.h > > > @@ -17,6 +17,7 @@ > > > #include <linux/regulator/consumer.h> > > > > > > #include <linux/phy/phy-dp.h> > > > +#include <linux/phy/phy-lvds.h> > > > #include <linux/phy/phy-mipi-dphy.h> > > > > > > struct phy; > > > @@ -51,10 +52,13 @@ enum phy_mode { > > > * the MIPI_DPHY phy mode. > > > * @dp: Configuration set applicable for phys supporting > > > * the DisplayPort protocol. > > > + * @lvds: Configuration set applicable for phys supporting > > > + * the LVDS phy mode. > > > */ > > > union phy_configure_opts { > > > struct phy_configure_opts_mipi_dphy mipi_dphy; > > > struct phy_configure_opts_dp dp; > > > + struct phy_configure_opts_lvds lvds; > > > }; > > > > > > /** > > >
Hi Kishon, Vinod, On Thu, 2021-06-10 at 17:38 +0800, Liu Ying wrote: > Hi Kishon, Vinod, > > Any follow-up comments/suggestions based on my previous reply? > Or, perhaps, just keep the patch as-is to support the generic lvds > phy > configuration structure? Ping... Any follow-up comments/suggestions please? This series is flying for more than one year and is blocking the series of adding DRM bridge drivers for the LVDS display pipeline on i.MX8qxp SoC. IMHO, the generic lvds phy configuration structure is useful to custom drivers. Shall we keep the patch as-is? I may rebase this series as patch 1/1 for nwl-dsi driver needs to keep updated with the latest nwl-dsi driver. Two more comments below... > > Thanks, > Liu Ying > > On Thu, 2021-04-01 at 16:36 +0800, Liu Ying wrote: > > Hi Kishon, > > > > First of all, thanks for your review. > > > > On Wed, 2021-03-31 at 19:02 +0530, Kishon Vijay Abraham I wrote: > > > Hi, > > > > > > On 25/03/21 2:30 pm, Liu Ying wrote: > > > > This patch allows LVDS PHYs to be configured through > > > > the generic functions and through a custom structure > > > > added to the generic union. > > > > > > > > The parameters added here are based on common LVDS PHY > > > > implementation practices. The set of parameters > > > > should cover all potential users. > > > > > > > > Cc: Kishon Vijay Abraham I <kishon@ti.com> > > > > Cc: Vinod Koul <vkoul@kernel.org> > > > > Cc: NXP Linux Team <linux-imx@nxp.com> > > > > Signed-off-by: Liu Ying <victor.liu@nxp.com> > > > > --- > > > > v4->v5: > > > > * Align kernel-doc style to include/linux/phy/phy.h. (Vinod) > > > > * Trivial tweaks. > > > > * Drop Robert's R-b tag. > > > > > > > > v3->v4: > > > > * Add Robert's R-b tag. > > > > > > > > v2->v3: > > > > * No change. > > > > > > > > v1->v2: > > > > * No change. > > > > > > > > include/linux/phy/phy-lvds.h | 32 > > > > ++++++++++++++++++++++++++++++++ > > > > include/linux/phy/phy.h | 4 ++++ > > > > 2 files changed, 36 insertions(+) > > > > create mode 100644 include/linux/phy/phy-lvds.h > > > > > > > > diff --git a/include/linux/phy/phy-lvds.h > > > > b/include/linux/phy/phy-lvds.h > > > > new file mode 100644 > > > > index 00000000..7a2f474 > > > > --- /dev/null > > > > +++ b/include/linux/phy/phy-lvds.h > > > > @@ -0,0 +1,32 @@ > > > > +/* SPDX-License-Identifier: GPL-2.0 */ > > > > +/* > > > > + * Copyright 2020 NXP > > > > + */ > > > > + > > > > +#ifndef __PHY_LVDS_H_ > > > > +#define __PHY_LVDS_H_ > > > > + > > > > +/** > > > > + * struct phy_configure_opts_lvds - LVDS configuration set > > > > + * @bits_per_lane_and_dclk_cycle: Number of bits per data > > > > lane and > > > > + * differential clock > > > > cycle. > > > > > > phy_set_bus_width() instead? > > > > This member aims to configure the number of bits transmitted during > > a > > period of time(a clock cycle). It doesn't sound like a concept of > > 'bus > > width'? > > > > > > + * @differential_clk_rate: Clock rate, in Hertz, > > > > of the LVDS > > > > + * differential clock. > > > > > > Please use clk API's to get rate. > > > > I like your idea. But, this rate is likely runtime-configurable, > > e.g., > > a LVDS to HDMI chip is connected. It seems that there is no > > appropriate > > driver to set the rate by calling clk_set_rate() then? It doesn't seem to be reasonable to use clk API's to get the rate, since the phy should generate the clock signal(act as a clk provider). If the phy drivers do act as a clk provider to register a clk for the differential clk, the phy drivers still need some way to know the clk rate. 'assigned-clock-rates' DT property cannot provide the rate because the rate is likely runtime-configurable like I mentioned. So, it looks like the differential_clk_rate member is the appropriate way to provide the rate. > > > > > > + * @lanes: Number of active, > > > > consecutive, > > > > + * data lanes, starting > > > > from lane 0, > > > > + * used for the > > > > transmissions. > > > > + * @is_slave: Boolean, true if the > > > > phy is a slave > > > > + * which works together > > > > with a master > > > > + * phy to support dual > > > > link transmission, > > > > + * otherwise a regular phy > > > > or a master phy. > > > > > > For parameters that are known at design time, it doesn't have to > > > be > > > passed from consumer driver. So all these parameters do they > > > really have > > > to be passed at runtime? > > > > Yes for all, perhaps. Details below: > > > > 1) bits_per_lane_and_dclk_cycle > > i.MX8qxp LVDS phy can only do 7, while i.MX8qm LVDS phy(a different > > IP) > > can do either 7 or 10(configurable by setting a phy register). > > > > 2) differential_clk_rate > > It's likely runtime-configurable, as I mentioned above. > > > > 3) lanes > > The higher color depth is, the more lanes are used: > > RGB666 - 3 lanes > > RGB888 - 4 lanes > > RGB101010 - 5 lanes > > > > That means a phy with 5 lanes(like i.MX8qm LVDS phy) support up to > > the > > 3 types of RGB pixels. > > > > Though the i.MX LVDS phys don't have any register to configure the > > lanes to be used, it would be good to define it for phy_validate() > > or > > other potential phys? Like the lanes member in struct phy_configure_opts_mipi_dphy, the lanes member is useful for custom drivers to choose/validate lane number. Regards, Liu Ying > > > > 4) is_slave > > Any i.MX8qxp LVDS phy instance can act as a regular phy or a master > > phy > > or a slave phy. Changing mode at runtime is probably unneeded. But, > > it's difficult for the phy driver to get the mode from device > > tree(see > > drm_of_lvds_get_port_pixels_type()), I think. Export an i.MX8qxp > > LVDS > > phy specific function to set this instead? > > > > Regards, > > Liu Ying > > > > > Thanks > > > Kishon > > > > + * > > > > + * This structure is used to represent the configuration state > > > > of a LVDS phy. > > > > + */ > > > > +struct phy_configure_opts_lvds { > > > > + unsigned int bits_per_lane_and_dclk_cycle; > > > > + unsigned long differential_clk_rate; > > > > + unsigned int lanes; > > > > + bool is_slave; > > > > +}; > > > > + > > > > +#endif /* __PHY_LVDS_H_ */ > > > > diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h > > > > index e435bdb..d450b44 100644 > > > > --- a/include/linux/phy/phy.h > > > > +++ b/include/linux/phy/phy.h > > > > @@ -17,6 +17,7 @@ > > > > #include <linux/regulator/consumer.h> > > > > > > > > #include <linux/phy/phy-dp.h> > > > > +#include <linux/phy/phy-lvds.h> > > > > #include <linux/phy/phy-mipi-dphy.h> > > > > > > > > struct phy; > > > > @@ -51,10 +52,13 @@ enum phy_mode { > > > > * the MIPI_DPHY phy mode. > > > > * @dp: Configuration set applicable for phys > > > > supporting > > > > * the DisplayPort protocol. > > > > + * @lvds: Configuration set applicable for phys > > > > supporting > > > > + * the LVDS phy mode. > > > > */ > > > > union phy_configure_opts { > > > > struct phy_configure_opts_mipi_dphy mipi_dphy; > > > > struct phy_configure_opts_dp dp; > > > > + struct phy_configure_opts_lvds lvds; > > > > }; > > > > > > > > /** > > > >
diff --git a/include/linux/phy/phy-lvds.h b/include/linux/phy/phy-lvds.h new file mode 100644 index 00000000..7a2f474 --- /dev/null +++ b/include/linux/phy/phy-lvds.h @@ -0,0 +1,32 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright 2020 NXP + */ + +#ifndef __PHY_LVDS_H_ +#define __PHY_LVDS_H_ + +/** + * struct phy_configure_opts_lvds - LVDS configuration set + * @bits_per_lane_and_dclk_cycle: Number of bits per data lane and + * differential clock cycle. + * @differential_clk_rate: Clock rate, in Hertz, of the LVDS + * differential clock. + * @lanes: Number of active, consecutive, + * data lanes, starting from lane 0, + * used for the transmissions. + * @is_slave: Boolean, true if the phy is a slave + * which works together with a master + * phy to support dual link transmission, + * otherwise a regular phy or a master phy. + * + * This structure is used to represent the configuration state of a LVDS phy. + */ +struct phy_configure_opts_lvds { + unsigned int bits_per_lane_and_dclk_cycle; + unsigned long differential_clk_rate; + unsigned int lanes; + bool is_slave; +}; + +#endif /* __PHY_LVDS_H_ */ diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h index e435bdb..d450b44 100644 --- a/include/linux/phy/phy.h +++ b/include/linux/phy/phy.h @@ -17,6 +17,7 @@ #include <linux/regulator/consumer.h> #include <linux/phy/phy-dp.h> +#include <linux/phy/phy-lvds.h> #include <linux/phy/phy-mipi-dphy.h> struct phy; @@ -51,10 +52,13 @@ enum phy_mode { * the MIPI_DPHY phy mode. * @dp: Configuration set applicable for phys supporting * the DisplayPort protocol. + * @lvds: Configuration set applicable for phys supporting + * the LVDS phy mode. */ union phy_configure_opts { struct phy_configure_opts_mipi_dphy mipi_dphy; struct phy_configure_opts_dp dp; + struct phy_configure_opts_lvds lvds; }; /**
This patch allows LVDS PHYs to be configured through the generic functions and through a custom structure added to the generic union. The parameters added here are based on common LVDS PHY implementation practices. The set of parameters should cover all potential users. Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: NXP Linux Team <linux-imx@nxp.com> Signed-off-by: Liu Ying <victor.liu@nxp.com> --- v4->v5: * Align kernel-doc style to include/linux/phy/phy.h. (Vinod) * Trivial tweaks. * Drop Robert's R-b tag. v3->v4: * Add Robert's R-b tag. v2->v3: * No change. v1->v2: * No change. include/linux/phy/phy-lvds.h | 32 ++++++++++++++++++++++++++++++++ include/linux/phy/phy.h | 4 ++++ 2 files changed, 36 insertions(+) create mode 100644 include/linux/phy/phy-lvds.h