@@ -45,7 +45,7 @@
(PINGPONG_SDM845_MASK | BIT(DPU_PINGPONG_TE2))
#define CTL_SC7280_MASK \
- (BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_FETCH_ACTIVE))
+ (BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_FETCH_ACTIVE) | BIT(DPU_CTL_VM_CFG))
#define MERGE_3D_SM8150_MASK (0)
@@ -179,13 +179,16 @@ enum {
/**
* CTL sub-blocks
- * @DPU_CTL_SPLIT_DISPLAY CTL supports video mode split display
+ * @DPU_CTL_SPLIT_DISPLAY: CTL supports video mode split display
+ * @DPU_CTL_FETCH_ACTIVE: Active CTL for fetch HW (SSPPs)
+ * @DPU_CTL_VM_CFG: CTL config to support multiple VMs
* @DPU_CTL_MAX
*/
enum {
DPU_CTL_SPLIT_DISPLAY = 0x1,
DPU_CTL_ACTIVE_CFG,
DPU_CTL_FETCH_ACTIVE,
+ DPU_CTL_VM_CFG,
DPU_CTL_MAX
};
@@ -36,6 +36,7 @@
#define MERGE_3D_IDX 23
#define INTF_IDX 31
#define CTL_INVALID_BIT 0xffff
+#define CTL_DEFAULT_GROUP_ID 0xf
static const u32 fetch_tbl[SSPP_MAX] = {CTL_INVALID_BIT, 16, 17, 18, 19,
CTL_INVALID_BIT, CTL_INVALID_BIT, CTL_INVALID_BIT, CTL_INVALID_BIT, 0,
@@ -498,6 +499,13 @@ static void dpu_hw_ctl_intf_cfg_v1(struct dpu_hw_ctl *ctx,
u32 intf_active = 0;
u32 mode_sel = 0;
+ /* CTL_TOP[31:28] carries group_id to collate CTL paths
+ * per VM. Explicitly disable it until VM support is
+ * added in SW. Power on reset value is not disable.
+ */
+ if ((test_bit(DPU_CTL_VM_CFG, &ctx->caps->features)))
+ mode_sel = CTL_DEFAULT_GROUP_ID << 28;
+
if (cfg->intf_mode_sel == DPU_CTL_MODE_SEL_CMD)
mode_sel |= BIT(17);
New required programming in CTL for SC7280. Group ID informs HW of which VM owns that CTL. Force this group ID to default/disabled until virtualization support is enabled in SW. Changes in v1: - Fix documentation and add descritpion for the change (Stephen) Signed-off-by: Kalyan Thota <quic_kalyant@quicinc.com> --- drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 2 +- drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 5 ++++- drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c | 8 ++++++++ 3 files changed, 13 insertions(+), 2 deletions(-)