diff mbox series

[v2,4/4] drm/msm/disp/dpu1: add PSR support for eDP interface in dpu driver

Message ID 1645455086-9359-5-git-send-email-quic_vpolimer@quicinc.com (mailing list archive)
State New, archived
Headers show
Series Add PSR support for eDP | expand

Commit Message

Vinod Polimera Feb. 21, 2022, 2:51 p.m. UTC
Enable PSR on eDP interface using drm self-refresh librabry.
This patch uses a trigger from self-refresh library to enter/exit
into PSR, when there are no updates from framework.

Changes in V2:
- Move dp functions to bridge code.
- As per Dmitry review suggestions.

Signed-off-by: Kalyan Thota <quic_kalyant@quicinc.com>
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c    | 31 +++++++++++++++++++++++++----
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 30 +++++++++++++++++++++++++++-
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c     |  2 +-
 3 files changed, 57 insertions(+), 6 deletions(-)

Comments

Stephen Boyd Feb. 22, 2022, 9:29 p.m. UTC | #1
Quoting Vinod Polimera (2022-02-21 06:51:26)
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> index e7c9fe1..ba3240c 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> @@ -951,6 +952,14 @@ static void dpu_crtc_disable(struct drm_crtc *crtc,
>
>         DRM_DEBUG_KMS("crtc%d\n", crtc->base.id);
>
> +       if (old_crtc_state->self_refresh_active) {
> +               drm_for_each_encoder_mask(encoder, crtc->dev,
> +                                old_crtc_state->encoder_mask) {
> +                       dpu_encoder_assign_crtc(encoder, NULL);
> +               }
> +               return;
> +       }
> +
>         /* Disable/save vblank irq handling */
>         drm_crtc_vblank_off(crtc);
>
> @@ -962,7 +971,12 @@ static void dpu_crtc_disable(struct drm_crtc *crtc,
>                  */
>                 if (dpu_encoder_get_intf_mode(encoder) == INTF_MODE_VIDEO)
>                         release_bandwidth = true;
> -               dpu_encoder_assign_crtc(encoder, NULL);
> +               /* If disable is triggered during psr active(e.g: screen dim in PSR),

Multiline comments start with /* on a line by itself

		/*
		 * If disable is triggered ...

> +                * we will need encoder->crtc connection to process the device sleep &
> +                * preserve it during psr sequence.
> +                */
> +               if (!crtc->state->self_refresh_active)
> +                       dpu_encoder_assign_crtc(encoder, NULL);
>         }
>
>         /* wait for frame_event_done completion */
> @@ -1010,6 +1024,8 @@ static void dpu_crtc_enable(struct drm_crtc *crtc,
>         struct dpu_crtc *dpu_crtc = to_dpu_crtc(crtc);
>         struct drm_encoder *encoder;
>         bool request_bandwidth = false;
> +       struct drm_crtc_state *old_crtc_state =
> +               drm_atomic_get_old_crtc_state(state, crtc);

Use two lines

	struct drm_crtc_state *old_crtc_state;

	old_crtc_state = drm_atomic_get_old_crtc_state(state, crtc);

>
>         pm_runtime_get_sync(crtc->dev->dev);
>
> @@ -1032,8 +1048,10 @@ static void dpu_crtc_enable(struct drm_crtc *crtc,
>         trace_dpu_crtc_enable(DRMID(crtc), true, dpu_crtc);
>         dpu_crtc->enabled = true;
>
> -       drm_for_each_encoder_mask(encoder, crtc->dev, crtc->state->encoder_mask)
> -               dpu_encoder_assign_crtc(encoder, crtc);
> +       if (!old_crtc_state->self_refresh_active) {
> +               drm_for_each_encoder_mask(encoder, crtc->dev, crtc->state->encoder_mask)
> +                       dpu_encoder_assign_crtc(encoder, crtc);

Make these two lines above into a function with a meaningful name?
dpu_encoder_assign_crtcs()? And then push the encoder mask iteration
into the loop by passing the mask as a function argument. I see
dpu_encoder_assign_crtc() takes a spinlock, so we could probably take
that lock out too and push it into this new function to avoid grabbing
and dropping the spinlock multiple times.

> +       }
>
>         /* Enable/restore vblank irq handling */
>         drm_crtc_vblank_on(crtc);
> @@ -1497,7 +1515,7 @@ struct drm_crtc *dpu_crtc_init(struct drm_device *dev, struct drm_plane *plane,
>  {
>         struct drm_crtc *crtc = NULL;
>         struct dpu_crtc *dpu_crtc = NULL;
> -       int i;
> +       int i, ret;
>
>         dpu_crtc = kzalloc(sizeof(*dpu_crtc), GFP_KERNEL);
>         if (!dpu_crtc)
> @@ -1534,6 +1552,11 @@ struct drm_crtc *dpu_crtc_init(struct drm_device *dev, struct drm_plane *plane,
>         /* initialize event handling */
>         spin_lock_init(&dpu_crtc->event_lock);
>
> +       ret = drm_self_refresh_helper_init(crtc);
> +       if (ret)
> +               DPU_ERROR("Failed to initialize %s with SR helpers %d\n",

What is SR? Write self-refresh?

> +                       crtc->name, ret);
> +
>         DRM_DEBUG_KMS("%s: successfully initialized crtc\n", dpu_crtc->name);
>         return crtc;
>  }
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> index 6eac417..ba9d8ea 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> @@ -217,6 +217,14 @@ static u32 dither_matrix[DITHER_MATRIX_SZ] = {
>         15, 7, 13, 5, 3, 11, 1, 9, 12, 4, 14, 6, 0, 8, 2, 10
>  };
>
> +static inline bool is_self_refresh_active(struct drm_crtc_state *state)

const drm_crtc_state?

> +{
> +       if (state && state->self_refresh_active)
> +               return true;
> +
> +       return false;

	return state && state->self_refresh_active;

> +}
> +
>  static void _dpu_encoder_setup_dither(struct dpu_hw_pingpong *hw_pp, unsigned bpc)
>  {
>         struct dpu_hw_dither_cfg dither_cfg = { 0 };
> @@ -629,7 +637,8 @@ static int dpu_encoder_virt_atomic_check(
>                 if (drm_atomic_crtc_needs_modeset(crtc_state)) {
>                         dpu_rm_release(global_state, drm_enc);
>
> -                       if (!crtc_state->active_changed || crtc_state->active)
> +                       if (!crtc_state->active_changed || crtc_state->active ||
> +                                       crtc_state->self_refresh_active)
>                                 ret = dpu_rm_reserve(&dpu_kms->rm, global_state,
>                                                 drm_enc, crtc_state, topology);
>                 }
> @@ -1182,11 +1191,30 @@ static void dpu_encoder_virt_disable(struct drm_encoder *drm_enc,
>  {
>         struct dpu_encoder_virt *dpu_enc = NULL;
>         struct msm_drm_private *priv;
> +       struct drm_crtc *crtc;
> +       struct drm_crtc_state *old_state;
>         int i = 0;
>
>         dpu_enc = to_dpu_encoder_virt(drm_enc);
>         DPU_DEBUG_ENC(dpu_enc, "\n");

Presumably this print wants a valid 'dpu_enc' pointer.

>
> +       if (!drm_enc) {

So this check for !drm_enc is impossible? Please remove it.

> +               DPU_ERROR("invalid encoder\n");
> +               return;
> +       }
> +       dpu_enc = to_dpu_encoder_virt(drm_enc);

We got it again?

> +
> +       crtc = dpu_enc->crtc;
> +
> +       old_state = drm_atomic_get_old_crtc_state(state, crtc);
> +
> +       /*
> +        * The encoder turn off already occurred when self refresh mode

s/turn off/disable/

> +        * was set earlier, in the old_state for the corresponding crtc.
> +        */
> +       if (drm_enc->encoder_type == DRM_MODE_ENCODER_TMDS && is_self_refresh_active(old_state))
> +               return;
> +
>         mutex_lock(&dpu_enc->enc_lock);
>         dpu_enc->enabled = false;
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> index 47fe11a..d550f90 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> @@ -495,7 +495,7 @@ static void dpu_kms_wait_for_commit_done(struct msm_kms *kms,
>                 return;
>         }
>
> -       if (!crtc->state->active) {
> +       if (!drm_atomic_crtc_effectively_active(crtc->state)) {
>                 DPU_DEBUG("[crtc:%d] not active\n", crtc->base.id);
>                 return;
>         }
> --
> 2.7.4
>
Vinod Polimera June 21, 2022, 11:04 a.m. UTC | #2
> -----Original Message-----
> From: Stephen Boyd <swboyd@chromium.org>
> Sent: Wednesday, February 23, 2022 2:59 AM
> To: quic_vpolimer <quic_vpolimer@quicinc.com>; agross@kernel.org;
> airlied@linux.ie; bjorn.andersson@linaro.org; daniel@ffwll.ch;
> devicetree@vger.kernel.org; dianders@chromium.org; dri-
> devel@lists.freedesktop.org; freedreno@lists.freedesktop.org;
> krzysztof.kozlowski@canonical.com; linux-arm-msm@vger.kernel.org; linux-
> kernel@vger.kernel.org; robdclark@gmail.com; robh+dt@kernel.org;
> sam@ravnborg.org; seanpaul@chromium.org; thierry.reding@gmail.com
> Cc: quic_kalyant <quic_kalyant@quicinc.com>; Sankeerth Billakanti (QUIC)
> <quic_sbillaka@quicinc.com>; quic_vproddut <quic_vproddut@quicinc.com>
> Subject: Re: [PATCH v2 4/4] drm/msm/disp/dpu1: add PSR support for eDP
> interface in dpu driver
> 
> WARNING: This email originated from outside of Qualcomm. Please be wary
> of any links or attachments, and do not enable macros.
> 
> Quoting Vinod Polimera (2022-02-21 06:51:26)
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> > index e7c9fe1..ba3240c 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> > @@ -951,6 +952,14 @@ static void dpu_crtc_disable(struct drm_crtc *crtc,
> >
> >         DRM_DEBUG_KMS("crtc%d\n", crtc->base.id);
> >
> > +       if (old_crtc_state->self_refresh_active) {
> > +               drm_for_each_encoder_mask(encoder, crtc->dev,
> > +                                old_crtc_state->encoder_mask) {
> > +                       dpu_encoder_assign_crtc(encoder, NULL);
> > +               }
> > +               return;
> > +       }
> > +
> >         /* Disable/save vblank irq handling */
> >         drm_crtc_vblank_off(crtc);
> >
> > @@ -962,7 +971,12 @@ static void dpu_crtc_disable(struct drm_crtc *crtc,
> >                  */
> >                 if (dpu_encoder_get_intf_mode(encoder) == INTF_MODE_VIDEO)
> >                         release_bandwidth = true;
> > -               dpu_encoder_assign_crtc(encoder, NULL);
> > +               /* If disable is triggered during psr active(e.g: screen dim in PSR),
> 
> Multiline comments start with /* on a line by itself
> 
>                 /*
>                  * If disable is triggered ...
> 
> > +                * we will need encoder->crtc connection to process the device
> sleep &
> > +                * preserve it during psr sequence.
> > +                */
> > +               if (!crtc->state->self_refresh_active)
> > +                       dpu_encoder_assign_crtc(encoder, NULL);
> >         }
> >
> >         /* wait for frame_event_done completion */
> > @@ -1010,6 +1024,8 @@ static void dpu_crtc_enable(struct drm_crtc *crtc,
> >         struct dpu_crtc *dpu_crtc = to_dpu_crtc(crtc);
> >         struct drm_encoder *encoder;
> >         bool request_bandwidth = false;
> > +       struct drm_crtc_state *old_crtc_state =
> > +               drm_atomic_get_old_crtc_state(state, crtc);
> 
> Use two lines
> 
>         struct drm_crtc_state *old_crtc_state;
> 
>         old_crtc_state = drm_atomic_get_old_crtc_state(state, crtc);
> 
> >
> >         pm_runtime_get_sync(crtc->dev->dev);
> >
> > @@ -1032,8 +1048,10 @@ static void dpu_crtc_enable(struct drm_crtc
> *crtc,
> >         trace_dpu_crtc_enable(DRMID(crtc), true, dpu_crtc);
> >         dpu_crtc->enabled = true;
> >
> > -       drm_for_each_encoder_mask(encoder, crtc->dev, crtc->state-
> >encoder_mask)
> > -               dpu_encoder_assign_crtc(encoder, crtc);
> > +       if (!old_crtc_state->self_refresh_active) {
> > +               drm_for_each_encoder_mask(encoder, crtc->dev, crtc->state-
> >encoder_mask)
> > +                       dpu_encoder_assign_crtc(encoder, crtc);
> 
> Make these two lines above into a function with a meaningful name?
> dpu_encoder_assign_crtcs()? And then push the encoder mask iteration
> into the loop by passing the mask as a function argument. I see
> dpu_encoder_assign_crtc() takes a spinlock, so we could probably take
> that lock out too and push it into this new function to avoid grabbing
> and dropping the spinlock multiple times.
 enc spinlock is specific to each dpu_enc which will grab the lock for each crtc assign. 
> 
> > +       }
> >
> >         /* Enable/restore vblank irq handling */
> >         drm_crtc_vblank_on(crtc);
> > @@ -1497,7 +1515,7 @@ struct drm_crtc *dpu_crtc_init(struct drm_device
> *dev, struct drm_plane *plane,
> >  {
> >         struct drm_crtc *crtc = NULL;
> >         struct dpu_crtc *dpu_crtc = NULL;
> > -       int i;
> > +       int i, ret;
> >
> >         dpu_crtc = kzalloc(sizeof(*dpu_crtc), GFP_KERNEL);
> >         if (!dpu_crtc)
> > @@ -1534,6 +1552,11 @@ struct drm_crtc *dpu_crtc_init(struct
> drm_device *dev, struct drm_plane *plane,
> >         /* initialize event handling */
> >         spin_lock_init(&dpu_crtc->event_lock);
> >
> > +       ret = drm_self_refresh_helper_init(crtc);
> > +       if (ret)
> > +               DPU_ERROR("Failed to initialize %s with SR helpers %d\n",
> 
> What is SR? Write self-refresh?
> 
> > +                       crtc->name, ret);
> > +
> >         DRM_DEBUG_KMS("%s: successfully initialized crtc\n", dpu_crtc-
> >name);
> >         return crtc;
> >  }
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> > index 6eac417..ba9d8ea 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> > @@ -217,6 +217,14 @@ static u32 dither_matrix[DITHER_MATRIX_SZ] = {
> >         15, 7, 13, 5, 3, 11, 1, 9, 12, 4, 14, 6, 0, 8, 2, 10
> >  };
> >
> > +static inline bool is_self_refresh_active(struct drm_crtc_state *state)
> 
> const drm_crtc_state?
> 
> > +{
> > +       if (state && state->self_refresh_active)
> > +               return true;
> > +
> > +       return false;
> 
>         return state && state->self_refresh_active;
> 
> > +}
> > +
> >  static void _dpu_encoder_setup_dither(struct dpu_hw_pingpong
> *hw_pp, unsigned bpc)
> >  {
> >         struct dpu_hw_dither_cfg dither_cfg = { 0 };
> > @@ -629,7 +637,8 @@ static int dpu_encoder_virt_atomic_check(
> >                 if (drm_atomic_crtc_needs_modeset(crtc_state)) {
> >                         dpu_rm_release(global_state, drm_enc);
> >
> > -                       if (!crtc_state->active_changed || crtc_state->active)
> > +                       if (!crtc_state->active_changed || crtc_state->active ||
> > +                                       crtc_state->self_refresh_active)
> >                                 ret = dpu_rm_reserve(&dpu_kms->rm, global_state,
> >                                                 drm_enc, crtc_state, topology);
> >                 }
> > @@ -1182,11 +1191,30 @@ static void dpu_encoder_virt_disable(struct
> drm_encoder *drm_enc,
> >  {
> >         struct dpu_encoder_virt *dpu_enc = NULL;
> >         struct msm_drm_private *priv;
> > +       struct drm_crtc *crtc;
> > +       struct drm_crtc_state *old_state;
> >         int i = 0;
> >
> >         dpu_enc = to_dpu_encoder_virt(drm_enc);
> >         DPU_DEBUG_ENC(dpu_enc, "\n");
> 
> Presumably this print wants a valid 'dpu_enc' pointer.
> 
> >
> > +       if (!drm_enc) {
> 
> So this check for !drm_enc is impossible? Please remove it.
> 
> > +               DPU_ERROR("invalid encoder\n");
> > +               return;
> > +       }
> > +       dpu_enc = to_dpu_encoder_virt(drm_enc);
> 
> We got it again?
> 
> > +
> > +       crtc = dpu_enc->crtc;
> > +
> > +       old_state = drm_atomic_get_old_crtc_state(state, crtc);
> > +
> > +       /*
> > +        * The encoder turn off already occurred when self refresh mode
> 
> s/turn off/disable/
> 
> > +        * was set earlier, in the old_state for the corresponding crtc.
> > +        */
> > +       if (drm_enc->encoder_type == DRM_MODE_ENCODER_TMDS &&
> is_self_refresh_active(old_state))
> > +               return;
> > +
> >         mutex_lock(&dpu_enc->enc_lock);
> >         dpu_enc->enabled = false;
> >
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> > index 47fe11a..d550f90 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> > @@ -495,7 +495,7 @@ static void dpu_kms_wait_for_commit_done(struct
> msm_kms *kms,
> >                 return;
> >         }
> >
> > -       if (!crtc->state->active) {
> > +       if (!drm_atomic_crtc_effectively_active(crtc->state)) {
> >                 DPU_DEBUG("[crtc:%d] not active\n", crtc->base.id);
> >                 return;
> >         }
> > --
> > 2.7.4
> >
diff mbox series

Patch

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
index e7c9fe1..ba3240c 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
@@ -18,6 +18,7 @@ 
 #include <drm/drm_probe_helper.h>
 #include <drm/drm_rect.h>
 #include <drm/drm_vblank.h>
+#include <drm/drm_self_refresh_helper.h>
 
 #include "dpu_kms.h"
 #include "dpu_hw_lm.h"
@@ -951,6 +952,14 @@  static void dpu_crtc_disable(struct drm_crtc *crtc,
 
 	DRM_DEBUG_KMS("crtc%d\n", crtc->base.id);
 
+	if (old_crtc_state->self_refresh_active) {
+		drm_for_each_encoder_mask(encoder, crtc->dev,
+				 old_crtc_state->encoder_mask) {
+			dpu_encoder_assign_crtc(encoder, NULL);
+		}
+		return;
+	}
+
 	/* Disable/save vblank irq handling */
 	drm_crtc_vblank_off(crtc);
 
@@ -962,7 +971,12 @@  static void dpu_crtc_disable(struct drm_crtc *crtc,
 		 */
 		if (dpu_encoder_get_intf_mode(encoder) == INTF_MODE_VIDEO)
 			release_bandwidth = true;
-		dpu_encoder_assign_crtc(encoder, NULL);
+		/* If disable is triggered during psr active(e.g: screen dim in PSR),
+		 * we will need encoder->crtc connection to process the device sleep &
+		 * preserve it during psr sequence.
+		 */
+		if (!crtc->state->self_refresh_active)
+			dpu_encoder_assign_crtc(encoder, NULL);
 	}
 
 	/* wait for frame_event_done completion */
@@ -1010,6 +1024,8 @@  static void dpu_crtc_enable(struct drm_crtc *crtc,
 	struct dpu_crtc *dpu_crtc = to_dpu_crtc(crtc);
 	struct drm_encoder *encoder;
 	bool request_bandwidth = false;
+	struct drm_crtc_state *old_crtc_state =
+		drm_atomic_get_old_crtc_state(state, crtc);
 
 	pm_runtime_get_sync(crtc->dev->dev);
 
@@ -1032,8 +1048,10 @@  static void dpu_crtc_enable(struct drm_crtc *crtc,
 	trace_dpu_crtc_enable(DRMID(crtc), true, dpu_crtc);
 	dpu_crtc->enabled = true;
 
-	drm_for_each_encoder_mask(encoder, crtc->dev, crtc->state->encoder_mask)
-		dpu_encoder_assign_crtc(encoder, crtc);
+	if (!old_crtc_state->self_refresh_active) {
+		drm_for_each_encoder_mask(encoder, crtc->dev, crtc->state->encoder_mask)
+			dpu_encoder_assign_crtc(encoder, crtc);
+	}
 
 	/* Enable/restore vblank irq handling */
 	drm_crtc_vblank_on(crtc);
@@ -1497,7 +1515,7 @@  struct drm_crtc *dpu_crtc_init(struct drm_device *dev, struct drm_plane *plane,
 {
 	struct drm_crtc *crtc = NULL;
 	struct dpu_crtc *dpu_crtc = NULL;
-	int i;
+	int i, ret;
 
 	dpu_crtc = kzalloc(sizeof(*dpu_crtc), GFP_KERNEL);
 	if (!dpu_crtc)
@@ -1534,6 +1552,11 @@  struct drm_crtc *dpu_crtc_init(struct drm_device *dev, struct drm_plane *plane,
 	/* initialize event handling */
 	spin_lock_init(&dpu_crtc->event_lock);
 
+	ret = drm_self_refresh_helper_init(crtc);
+	if (ret)
+		DPU_ERROR("Failed to initialize %s with SR helpers %d\n",
+			crtc->name, ret);
+
 	DRM_DEBUG_KMS("%s: successfully initialized crtc\n", dpu_crtc->name);
 	return crtc;
 }
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index 6eac417..ba9d8ea 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -217,6 +217,14 @@  static u32 dither_matrix[DITHER_MATRIX_SZ] = {
 	15, 7, 13, 5, 3, 11, 1, 9, 12, 4, 14, 6, 0, 8, 2, 10
 };
 
+static inline bool is_self_refresh_active(struct drm_crtc_state *state)
+{
+	if (state && state->self_refresh_active)
+		return true;
+
+	return false;
+}
+
 static void _dpu_encoder_setup_dither(struct dpu_hw_pingpong *hw_pp, unsigned bpc)
 {
 	struct dpu_hw_dither_cfg dither_cfg = { 0 };
@@ -629,7 +637,8 @@  static int dpu_encoder_virt_atomic_check(
 		if (drm_atomic_crtc_needs_modeset(crtc_state)) {
 			dpu_rm_release(global_state, drm_enc);
 
-			if (!crtc_state->active_changed || crtc_state->active)
+			if (!crtc_state->active_changed || crtc_state->active ||
+					crtc_state->self_refresh_active)
 				ret = dpu_rm_reserve(&dpu_kms->rm, global_state,
 						drm_enc, crtc_state, topology);
 		}
@@ -1182,11 +1191,30 @@  static void dpu_encoder_virt_disable(struct drm_encoder *drm_enc,
 {
 	struct dpu_encoder_virt *dpu_enc = NULL;
 	struct msm_drm_private *priv;
+	struct drm_crtc *crtc;
+	struct drm_crtc_state *old_state;
 	int i = 0;
 
 	dpu_enc = to_dpu_encoder_virt(drm_enc);
 	DPU_DEBUG_ENC(dpu_enc, "\n");
 
+	if (!drm_enc) {
+		DPU_ERROR("invalid encoder\n");
+		return;
+	}
+	dpu_enc = to_dpu_encoder_virt(drm_enc);
+
+	crtc = dpu_enc->crtc;
+
+	old_state = drm_atomic_get_old_crtc_state(state, crtc);
+
+	/*
+	 * The encoder turn off already occurred when self refresh mode
+	 * was set earlier, in the old_state for the corresponding crtc.
+	 */
+	if (drm_enc->encoder_type == DRM_MODE_ENCODER_TMDS && is_self_refresh_active(old_state))
+		return;
+
 	mutex_lock(&dpu_enc->enc_lock);
 	dpu_enc->enabled = false;
 
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index 47fe11a..d550f90 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -495,7 +495,7 @@  static void dpu_kms_wait_for_commit_done(struct msm_kms *kms,
 		return;
 	}
 
-	if (!crtc->state->active) {
+	if (!drm_atomic_crtc_effectively_active(crtc->state)) {
 		DPU_DEBUG("[crtc:%d] not active\n", crtc->base.id);
 		return;
 	}