diff mbox series

[v9,1/4] drm/msm/dpu: adjust display_v_end for eDP and DP

Message ID 1645570816-21150-2-git-send-email-quic_khsieh@quicinc.com (mailing list archive)
State New, archived
Headers show
Series drm/msm/dpu: enable widebus feature base on chip hardware revision | expand

Commit Message

Kuogee Hsieh Feb. 22, 2022, 11 p.m. UTC 
The “DP timing” requires the active region to be defined in the
bottom-right corner of the frame dimensions which is different
with DSI. Therefore both display_h_end and display_v_end need
to be adjusted accordingly. However current implementation has
only display_h_end adjusted.

Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>

Fixes: fc3a69ec68d3 ("drm/msm/dpu: intf timing path for displayport")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c | 1 +
 1 file changed, 1 insertion(+)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
index 116e2b5..284f561 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
@@ -148,6 +148,7 @@  static void dpu_hw_intf_setup_timing_engine(struct dpu_hw_intf *ctx,
 		active_v_end = active_v_start + (p->yres * hsync_period) - 1;
 
 		display_v_start += p->hsync_pulse_width + p->h_back_porch;
+		display_v_end   -= p->h_front_porch; 
 
 		active_hctl = (active_h_end << 16) | active_h_start;
 		display_hctl = active_hctl;