| Message ID | 1650062064-11838-1-git-send-email-quic_khsieh@quicinc.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v7] drm/msm/dp: stop event kernel thread when DP unbind | expand |
On Sat, 16 Apr 2022 at 01:34, Kuogee Hsieh <quic_khsieh@quicinc.com> wrote: > > Current DP driver implementation, event thread is kept running > after DP display is unbind. This patch fix this problem by disabling > DP irq and stop event thread to exit gracefully at dp_display_unbind(). > > Changes in v2: > -- start event thread at dp_display_bind() > > Changes in v3: > -- disable all HDP interrupts at unbind > -- replace dp_hpd_event_setup() with dp_hpd_event_thread_start() > -- replace dp_hpd_event_stop() with dp_hpd_event_thread_stop() > -- move init_waitqueue_head(&dp->event_q) to probe() > -- move spin_lock_init(&dp->event_lock) to probe() > > Changes in v4: > -- relocate both dp_display_bind() and dp_display_unbind() to bottom of file > > Changes in v5: > -- cancel relocation of both dp_display_bind() and dp_display_unbind() > > Changes in v6: > -- move empty event q to dp_event_thread_start() > > Changes in v7: > -- call ktheread_stop() directly instead of dp_hpd_event_thread_stop() function > > Fixes: e91e3065a806 ("drm/msm/dp: Add DP compliance tests on Snapdragon Chipsets") > Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> > Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > Reviewed-by: Stephen Boyd <swboyd@chromium.org> > --- > drivers/gpu/drm/msm/dp/dp_display.c | 31 ++++++++++++++++++++++++------- > 1 file changed, 24 insertions(+), 7 deletions(-) > > diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c > index 01453db..680e500 100644 > --- a/drivers/gpu/drm/msm/dp/dp_display.c > +++ b/drivers/gpu/drm/msm/dp/dp_display.c > @@ -113,6 +113,7 @@ struct dp_display_private { > u32 hpd_state; > u32 event_pndx; > u32 event_gndx; > + struct task_struct *ev_tsk; > struct dp_event event_list[DP_EVENT_Q_MAX]; > spinlock_t event_lock; > > @@ -230,6 +231,8 @@ void dp_display_signal_audio_complete(struct msm_dp *dp_display) > complete_all(&dp->audio_comp); > } > > +static int dp_hpd_event_thread_start(struct dp_display_private *dp_priv); > + > static int dp_display_bind(struct device *dev, struct device *master, > void *data) > { > @@ -269,6 +272,7 @@ static int dp_display_bind(struct device *dev, struct device *master, > if (rc) > DRM_ERROR("Audio registration Dp failed\n"); I think I asked it in v3 and didn't get an answer: Isn't 'goto end' missing here? > > + rc = dp_hpd_event_thread_start(dp); if (rc) { DRM_ERROR(....); goto end; } return 0; Please. > end: > return rc; > } > @@ -280,6 +284,11 @@ static void dp_display_unbind(struct device *dev, struct device *master, > struct drm_device *drm = dev_get_drvdata(master); > struct msm_drm_private *priv = drm->dev_private; > > + /* disable all HPD interrupts */ > + dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_INT_MASK, false); > + > + kthread_stop(dp->ev_tsk); > + > dp_power_client_deinit(dp->power); > dp_aux_unregister(dp->aux); > priv->dp[dp->id] = NULL; > @@ -1054,7 +1063,7 @@ static int hpd_event_thread(void *data) > > dp_priv = (struct dp_display_private *)data; > > - while (1) { > + while (!kthread_should_stop()) { > if (timeout_mode) { > wait_event_timeout(dp_priv->event_q, > (dp_priv->event_pndx == dp_priv->event_gndx), > @@ -1132,12 +1141,19 @@ static int hpd_event_thread(void *data) > return 0; > } > > -static void dp_hpd_event_setup(struct dp_display_private *dp_priv) > +static int dp_hpd_event_thread_start(struct dp_display_private *dp_priv) > { > - init_waitqueue_head(&dp_priv->event_q); > - spin_lock_init(&dp_priv->event_lock); > + /* set event q to empty */ > + dp_priv->event_gndx = 0; > + dp_priv->event_pndx = 0; > + > + dp_priv->ev_tsk = kthread_run(hpd_event_thread, dp_priv, "dp_hpd_handler"); > + if (IS_ERR(dp_priv->ev_tsk)) { > + DRM_ERROR("failed to create DP event thread\n"); > + return PTR_ERR(dp_priv->ev_tsk); > + } > > - kthread_run(hpd_event_thread, dp_priv, "dp_hpd_handler"); > + return 0; > } > > static irqreturn_t dp_display_irq_handler(int irq, void *dev_id) > @@ -1266,7 +1282,10 @@ static int dp_display_probe(struct platform_device *pdev) > return -EPROBE_DEFER; > } > > + /* setup event q */ > mutex_init(&dp->event_mutex); > + init_waitqueue_head(&dp->event_q); > + spin_lock_init(&dp->event_lock); > > /* Store DP audio handle inside DP display */ > dp->dp_display.dp_audio = dp->audio; > @@ -1441,8 +1460,6 @@ void msm_dp_irq_postinstall(struct msm_dp *dp_display) > > dp = container_of(dp_display, struct dp_display_private, dp_display); > > - dp_hpd_event_setup(dp); > - > dp_add_event(dp, EV_HPD_INIT_SETUP, 0, 100); > } > > -- > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, > a Linux Foundation Collaborative Project >
On 4/15/2022 3:48 PM, Dmitry Baryshkov wrote: > On Sat, 16 Apr 2022 at 01:34, Kuogee Hsieh <quic_khsieh@quicinc.com> wrote: >> Current DP driver implementation, event thread is kept running >> after DP display is unbind. This patch fix this problem by disabling >> DP irq and stop event thread to exit gracefully at dp_display_unbind(). >> >> Changes in v2: >> -- start event thread at dp_display_bind() >> >> Changes in v3: >> -- disable all HDP interrupts at unbind >> -- replace dp_hpd_event_setup() with dp_hpd_event_thread_start() >> -- replace dp_hpd_event_stop() with dp_hpd_event_thread_stop() >> -- move init_waitqueue_head(&dp->event_q) to probe() >> -- move spin_lock_init(&dp->event_lock) to probe() >> >> Changes in v4: >> -- relocate both dp_display_bind() and dp_display_unbind() to bottom of file >> >> Changes in v5: >> -- cancel relocation of both dp_display_bind() and dp_display_unbind() >> >> Changes in v6: >> -- move empty event q to dp_event_thread_start() >> >> Changes in v7: >> -- call ktheread_stop() directly instead of dp_hpd_event_thread_stop() function >> >> Fixes: e91e3065a806 ("drm/msm/dp: Add DP compliance tests on Snapdragon Chipsets") >> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> >> Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> >> Reviewed-by: Stephen Boyd <swboyd@chromium.org> >> --- >> drivers/gpu/drm/msm/dp/dp_display.c | 31 ++++++++++++++++++++++++------- >> 1 file changed, 24 insertions(+), 7 deletions(-) >> >> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c >> index 01453db..680e500 100644 >> --- a/drivers/gpu/drm/msm/dp/dp_display.c >> +++ b/drivers/gpu/drm/msm/dp/dp_display.c >> @@ -113,6 +113,7 @@ struct dp_display_private { >> u32 hpd_state; >> u32 event_pndx; >> u32 event_gndx; >> + struct task_struct *ev_tsk; >> struct dp_event event_list[DP_EVENT_Q_MAX]; >> spinlock_t event_lock; >> >> @@ -230,6 +231,8 @@ void dp_display_signal_audio_complete(struct msm_dp *dp_display) >> complete_all(&dp->audio_comp); >> } >> >> +static int dp_hpd_event_thread_start(struct dp_display_private *dp_priv); >> + >> static int dp_display_bind(struct device *dev, struct device *master, >> void *data) >> { >> @@ -269,6 +272,7 @@ static int dp_display_bind(struct device *dev, struct device *master, >> if (rc) >> DRM_ERROR("Audio registration Dp failed\n"); > I think I asked it in v3 and didn't get an answer: > Isn't 'goto end' missing here? I did follow you suggestion at v3 and made changes at dp_hpd_event_thread_start() >> + rc = dp_hpd_event_thread_start(dp); > if (rc) { DRM_ERROR(....); goto end; } > return 0; > > Please. This is at dp_display_bind(), "end" is the next statement why goto needed? >> end: >> return rc; >> } >> @@ -280,6 +284,11 @@ static void dp_display_unbind(struct device *dev, struct device *master, >> struct drm_device *drm = dev_get_drvdata(master); >> struct msm_drm_private *priv = drm->dev_private; >> >> + /* disable all HPD interrupts */ >> + dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_INT_MASK, false); >> + >> + kthread_stop(dp->ev_tsk); >> + >> dp_power_client_deinit(dp->power); >> dp_aux_unregister(dp->aux); >> priv->dp[dp->id] = NULL; >> @@ -1054,7 +1063,7 @@ static int hpd_event_thread(void *data) >> >> dp_priv = (struct dp_display_private *)data; >> >> - while (1) { >> + while (!kthread_should_stop()) { >> if (timeout_mode) { >> wait_event_timeout(dp_priv->event_q, >> (dp_priv->event_pndx == dp_priv->event_gndx), >> @@ -1132,12 +1141,19 @@ static int hpd_event_thread(void *data) >> return 0; >> } >> >> -static void dp_hpd_event_setup(struct dp_display_private *dp_priv) >> +static int dp_hpd_event_thread_start(struct dp_display_private *dp_priv) >> { >> - init_waitqueue_head(&dp_priv->event_q); >> - spin_lock_init(&dp_priv->event_lock); >> + /* set event q to empty */ >> + dp_priv->event_gndx = 0; >> + dp_priv->event_pndx = 0; >> + >> + dp_priv->ev_tsk = kthread_run(hpd_event_thread, dp_priv, "dp_hpd_handler"); >> + if (IS_ERR(dp_priv->ev_tsk)) { >> + DRM_ERROR("failed to create DP event thread\n"); >> + return PTR_ERR(dp_priv->ev_tsk); >> + } >> >> - kthread_run(hpd_event_thread, dp_priv, "dp_hpd_handler"); >> + return 0; >> } >> >> static irqreturn_t dp_display_irq_handler(int irq, void *dev_id) >> @@ -1266,7 +1282,10 @@ static int dp_display_probe(struct platform_device *pdev) >> return -EPROBE_DEFER; >> } >> >> + /* setup event q */ >> mutex_init(&dp->event_mutex); >> + init_waitqueue_head(&dp->event_q); >> + spin_lock_init(&dp->event_lock); >> >> /* Store DP audio handle inside DP display */ >> dp->dp_display.dp_audio = dp->audio; >> @@ -1441,8 +1460,6 @@ void msm_dp_irq_postinstall(struct msm_dp *dp_display) >> >> dp = container_of(dp_display, struct dp_display_private, dp_display); >> >> - dp_hpd_event_setup(dp); >> - >> dp_add_event(dp, EV_HPD_INIT_SETUP, 0, 100); >> } >> >> -- >> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, >> a Linux Foundation Collaborative Project >> >
On Sat, 16 Apr 2022 at 02:10, Kuogee Hsieh <quic_khsieh@quicinc.com> wrote: > > > On 4/15/2022 3:48 PM, Dmitry Baryshkov wrote: > > On Sat, 16 Apr 2022 at 01:34, Kuogee Hsieh <quic_khsieh@quicinc.com> wrote: > >> Current DP driver implementation, event thread is kept running > >> after DP display is unbind. This patch fix this problem by disabling > >> DP irq and stop event thread to exit gracefully at dp_display_unbind(). > >> > >> Changes in v2: > >> -- start event thread at dp_display_bind() > >> > >> Changes in v3: > >> -- disable all HDP interrupts at unbind > >> -- replace dp_hpd_event_setup() with dp_hpd_event_thread_start() > >> -- replace dp_hpd_event_stop() with dp_hpd_event_thread_stop() > >> -- move init_waitqueue_head(&dp->event_q) to probe() > >> -- move spin_lock_init(&dp->event_lock) to probe() > >> > >> Changes in v4: > >> -- relocate both dp_display_bind() and dp_display_unbind() to bottom of file > >> > >> Changes in v5: > >> -- cancel relocation of both dp_display_bind() and dp_display_unbind() > >> > >> Changes in v6: > >> -- move empty event q to dp_event_thread_start() > >> > >> Changes in v7: > >> -- call ktheread_stop() directly instead of dp_hpd_event_thread_stop() function > >> > >> Fixes: e91e3065a806 ("drm/msm/dp: Add DP compliance tests on Snapdragon Chipsets") > >> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> > >> Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > >> Reviewed-by: Stephen Boyd <swboyd@chromium.org> > >> --- > >> drivers/gpu/drm/msm/dp/dp_display.c | 31 ++++++++++++++++++++++++------- > >> 1 file changed, 24 insertions(+), 7 deletions(-) > >> > >> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c > >> index 01453db..680e500 100644 > >> --- a/drivers/gpu/drm/msm/dp/dp_display.c > >> +++ b/drivers/gpu/drm/msm/dp/dp_display.c > >> @@ -113,6 +113,7 @@ struct dp_display_private { > >> u32 hpd_state; > >> u32 event_pndx; > >> u32 event_gndx; > >> + struct task_struct *ev_tsk; > >> struct dp_event event_list[DP_EVENT_Q_MAX]; > >> spinlock_t event_lock; > >> > >> @@ -230,6 +231,8 @@ void dp_display_signal_audio_complete(struct msm_dp *dp_display) > >> complete_all(&dp->audio_comp); > >> } > >> > >> +static int dp_hpd_event_thread_start(struct dp_display_private *dp_priv); > >> + > >> static int dp_display_bind(struct device *dev, struct device *master, > >> void *data) > >> { > >> @@ -269,6 +272,7 @@ static int dp_display_bind(struct device *dev, struct device *master, > >> if (rc) > >> DRM_ERROR("Audio registration Dp failed\n"); > > I think I asked it in v3 and didn't get an answer: > > Isn't 'goto end' missing here? > I did follow you suggestion at v3 and made changes at > dp_hpd_event_thread_start() I'm asking about this place. Should we return an immediate error if audio registration has failed or not? > >> + rc = dp_hpd_event_thread_start(dp); > > if (rc) { DRM_ERROR(....); goto end; } > > return 0; > > > > Please. > This is at dp_display_bind(), "end" is the next statement why goto needed? To be explicit that this is a fatal error. Compare this to my question regarding the audio registration failure. > >> end: > >> return rc; > >> } > >> @@ -280,6 +284,11 @@ static void dp_display_unbind(struct device *dev, struct device *master, > >> struct drm_device *drm = dev_get_drvdata(master); > >> struct msm_drm_private *priv = drm->dev_private; > >> > >> + /* disable all HPD interrupts */ > >> + dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_INT_MASK, false); > >> + > >> + kthread_stop(dp->ev_tsk); > >> + > >> dp_power_client_deinit(dp->power); > >> dp_aux_unregister(dp->aux); > >> priv->dp[dp->id] = NULL; > >> @@ -1054,7 +1063,7 @@ static int hpd_event_thread(void *data) > >> > >> dp_priv = (struct dp_display_private *)data; > >> > >> - while (1) { > >> + while (!kthread_should_stop()) { > >> if (timeout_mode) { > >> wait_event_timeout(dp_priv->event_q, > >> (dp_priv->event_pndx == dp_priv->event_gndx), > >> @@ -1132,12 +1141,19 @@ static int hpd_event_thread(void *data) > >> return 0; > >> } > >> > >> -static void dp_hpd_event_setup(struct dp_display_private *dp_priv) > >> +static int dp_hpd_event_thread_start(struct dp_display_private *dp_priv) > >> { > >> - init_waitqueue_head(&dp_priv->event_q); > >> - spin_lock_init(&dp_priv->event_lock); > >> + /* set event q to empty */ > >> + dp_priv->event_gndx = 0; > >> + dp_priv->event_pndx = 0; > >> + > >> + dp_priv->ev_tsk = kthread_run(hpd_event_thread, dp_priv, "dp_hpd_handler"); > >> + if (IS_ERR(dp_priv->ev_tsk)) { > >> + DRM_ERROR("failed to create DP event thread\n"); > >> + return PTR_ERR(dp_priv->ev_tsk); > >> + } > >> > >> - kthread_run(hpd_event_thread, dp_priv, "dp_hpd_handler"); > >> + return 0; > >> } > >> > >> static irqreturn_t dp_display_irq_handler(int irq, void *dev_id) > >> @@ -1266,7 +1282,10 @@ static int dp_display_probe(struct platform_device *pdev) > >> return -EPROBE_DEFER; > >> } > >> > >> + /* setup event q */ > >> mutex_init(&dp->event_mutex); > >> + init_waitqueue_head(&dp->event_q); > >> + spin_lock_init(&dp->event_lock); > >> > >> /* Store DP audio handle inside DP display */ > >> dp->dp_display.dp_audio = dp->audio; > >> @@ -1441,8 +1460,6 @@ void msm_dp_irq_postinstall(struct msm_dp *dp_display) > >> > >> dp = container_of(dp_display, struct dp_display_private, dp_display); > >> > >> - dp_hpd_event_setup(dp); > >> - > >> dp_add_event(dp, EV_HPD_INIT_SETUP, 0, 100); > >> } > >> > >> -- > >> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, > >> a Linux Foundation Collaborative Project > >> > >
On 4/15/2022 4:27 PM, Dmitry Baryshkov wrote: > On Sat, 16 Apr 2022 at 02:10, Kuogee Hsieh <quic_khsieh@quicinc.com> wrote: >> >> On 4/15/2022 3:48 PM, Dmitry Baryshkov wrote: >>> On Sat, 16 Apr 2022 at 01:34, Kuogee Hsieh <quic_khsieh@quicinc.com> wrote: >>>> Current DP driver implementation, event thread is kept running >>>> after DP display is unbind. This patch fix this problem by disabling >>>> DP irq and stop event thread to exit gracefully at dp_display_unbind(). >>>> >>>> Changes in v2: >>>> -- start event thread at dp_display_bind() >>>> >>>> Changes in v3: >>>> -- disable all HDP interrupts at unbind >>>> -- replace dp_hpd_event_setup() with dp_hpd_event_thread_start() >>>> -- replace dp_hpd_event_stop() with dp_hpd_event_thread_stop() >>>> -- move init_waitqueue_head(&dp->event_q) to probe() >>>> -- move spin_lock_init(&dp->event_lock) to probe() >>>> >>>> Changes in v4: >>>> -- relocate both dp_display_bind() and dp_display_unbind() to bottom of file >>>> >>>> Changes in v5: >>>> -- cancel relocation of both dp_display_bind() and dp_display_unbind() >>>> >>>> Changes in v6: >>>> -- move empty event q to dp_event_thread_start() >>>> >>>> Changes in v7: >>>> -- call ktheread_stop() directly instead of dp_hpd_event_thread_stop() function >>>> >>>> Fixes: e91e3065a806 ("drm/msm/dp: Add DP compliance tests on Snapdragon Chipsets") >>>> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> >>>> Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> >>>> Reviewed-by: Stephen Boyd <swboyd@chromium.org> >>>> --- >>>> drivers/gpu/drm/msm/dp/dp_display.c | 31 ++++++++++++++++++++++++------- >>>> 1 file changed, 24 insertions(+), 7 deletions(-) >>>> >>>> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c >>>> index 01453db..680e500 100644 >>>> --- a/drivers/gpu/drm/msm/dp/dp_display.c >>>> +++ b/drivers/gpu/drm/msm/dp/dp_display.c >>>> @@ -113,6 +113,7 @@ struct dp_display_private { >>>> u32 hpd_state; >>>> u32 event_pndx; >>>> u32 event_gndx; >>>> + struct task_struct *ev_tsk; >>>> struct dp_event event_list[DP_EVENT_Q_MAX]; >>>> spinlock_t event_lock; >>>> >>>> @@ -230,6 +231,8 @@ void dp_display_signal_audio_complete(struct msm_dp *dp_display) >>>> complete_all(&dp->audio_comp); >>>> } >>>> >>>> +static int dp_hpd_event_thread_start(struct dp_display_private *dp_priv); >>>> + >>>> static int dp_display_bind(struct device *dev, struct device *master, >>>> void *data) >>>> { >>>> @@ -269,6 +272,7 @@ static int dp_display_bind(struct device *dev, struct device *master, >>>> if (rc) >>>> DRM_ERROR("Audio registration Dp failed\n"); >>> I think I asked it in v3 and didn't get an answer: >>> Isn't 'goto end' missing here? >> I did follow you suggestion at v3 and made changes at >> dp_hpd_event_thread_start() > I'm asking about this place. Should we return an immediate error if > audio registration has failed or not? ok, it is not in this patch. I will make changes to it. >>>> + rc = dp_hpd_event_thread_start(dp); >>> if (rc) { DRM_ERROR(....); goto end; } >>> return 0; >>> >>> Please. >> This is at dp_display_bind(), "end" is the next statement why goto needed? > To be explicit that this is a fatal error. Compare this to my question > regarding the audio registration failure. > >>>> end: >>>> return rc; >>>> } >>>> @@ -280,6 +284,11 @@ static void dp_display_unbind(struct device *dev, struct device *master, >>>> struct drm_device *drm = dev_get_drvdata(master); >>>> struct msm_drm_private *priv = drm->dev_private; >>>> >>>> + /* disable all HPD interrupts */ >>>> + dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_INT_MASK, false); >>>> + >>>> + kthread_stop(dp->ev_tsk); >>>> + >>>> dp_power_client_deinit(dp->power); >>>> dp_aux_unregister(dp->aux); >>>> priv->dp[dp->id] = NULL; >>>> @@ -1054,7 +1063,7 @@ static int hpd_event_thread(void *data) >>>> >>>> dp_priv = (struct dp_display_private *)data; >>>> >>>> - while (1) { >>>> + while (!kthread_should_stop()) { >>>> if (timeout_mode) { >>>> wait_event_timeout(dp_priv->event_q, >>>> (dp_priv->event_pndx == dp_priv->event_gndx), >>>> @@ -1132,12 +1141,19 @@ static int hpd_event_thread(void *data) >>>> return 0; >>>> } >>>> >>>> -static void dp_hpd_event_setup(struct dp_display_private *dp_priv) >>>> +static int dp_hpd_event_thread_start(struct dp_display_private *dp_priv) >>>> { >>>> - init_waitqueue_head(&dp_priv->event_q); >>>> - spin_lock_init(&dp_priv->event_lock); >>>> + /* set event q to empty */ >>>> + dp_priv->event_gndx = 0; >>>> + dp_priv->event_pndx = 0; >>>> + >>>> + dp_priv->ev_tsk = kthread_run(hpd_event_thread, dp_priv, "dp_hpd_handler"); >>>> + if (IS_ERR(dp_priv->ev_tsk)) { >>>> + DRM_ERROR("failed to create DP event thread\n"); >>>> + return PTR_ERR(dp_priv->ev_tsk); >>>> + } >>>> >>>> - kthread_run(hpd_event_thread, dp_priv, "dp_hpd_handler"); >>>> + return 0; >>>> } >>>> >>>> static irqreturn_t dp_display_irq_handler(int irq, void *dev_id) >>>> @@ -1266,7 +1282,10 @@ static int dp_display_probe(struct platform_device *pdev) >>>> return -EPROBE_DEFER; >>>> } >>>> >>>> + /* setup event q */ >>>> mutex_init(&dp->event_mutex); >>>> + init_waitqueue_head(&dp->event_q); >>>> + spin_lock_init(&dp->event_lock); >>>> >>>> /* Store DP audio handle inside DP display */ >>>> dp->dp_display.dp_audio = dp->audio; >>>> @@ -1441,8 +1460,6 @@ void msm_dp_irq_postinstall(struct msm_dp *dp_display) >>>> >>>> dp = container_of(dp_display, struct dp_display_private, dp_display); >>>> >>>> - dp_hpd_event_setup(dp); >>>> - >>>> dp_add_event(dp, EV_HPD_INIT_SETUP, 0, 100); >>>> } >>>> >>>> -- >>>> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, >>>> a Linux Foundation Collaborative Project >>>> > >
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c index 01453db..680e500 100644 --- a/drivers/gpu/drm/msm/dp/dp_display.c +++ b/drivers/gpu/drm/msm/dp/dp_display.c @@ -113,6 +113,7 @@ struct dp_display_private { u32 hpd_state; u32 event_pndx; u32 event_gndx; + struct task_struct *ev_tsk; struct dp_event event_list[DP_EVENT_Q_MAX]; spinlock_t event_lock; @@ -230,6 +231,8 @@ void dp_display_signal_audio_complete(struct msm_dp *dp_display) complete_all(&dp->audio_comp); } +static int dp_hpd_event_thread_start(struct dp_display_private *dp_priv); + static int dp_display_bind(struct device *dev, struct device *master, void *data) { @@ -269,6 +272,7 @@ static int dp_display_bind(struct device *dev, struct device *master, if (rc) DRM_ERROR("Audio registration Dp failed\n"); + rc = dp_hpd_event_thread_start(dp); end: return rc; } @@ -280,6 +284,11 @@ static void dp_display_unbind(struct device *dev, struct device *master, struct drm_device *drm = dev_get_drvdata(master); struct msm_drm_private *priv = drm->dev_private; + /* disable all HPD interrupts */ + dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_INT_MASK, false); + + kthread_stop(dp->ev_tsk); + dp_power_client_deinit(dp->power); dp_aux_unregister(dp->aux); priv->dp[dp->id] = NULL; @@ -1054,7 +1063,7 @@ static int hpd_event_thread(void *data) dp_priv = (struct dp_display_private *)data; - while (1) { + while (!kthread_should_stop()) { if (timeout_mode) { wait_event_timeout(dp_priv->event_q, (dp_priv->event_pndx == dp_priv->event_gndx), @@ -1132,12 +1141,19 @@ static int hpd_event_thread(void *data) return 0; } -static void dp_hpd_event_setup(struct dp_display_private *dp_priv) +static int dp_hpd_event_thread_start(struct dp_display_private *dp_priv) { - init_waitqueue_head(&dp_priv->event_q); - spin_lock_init(&dp_priv->event_lock); + /* set event q to empty */ + dp_priv->event_gndx = 0; + dp_priv->event_pndx = 0; + + dp_priv->ev_tsk = kthread_run(hpd_event_thread, dp_priv, "dp_hpd_handler"); + if (IS_ERR(dp_priv->ev_tsk)) { + DRM_ERROR("failed to create DP event thread\n"); + return PTR_ERR(dp_priv->ev_tsk); + } - kthread_run(hpd_event_thread, dp_priv, "dp_hpd_handler"); + return 0; } static irqreturn_t dp_display_irq_handler(int irq, void *dev_id) @@ -1266,7 +1282,10 @@ static int dp_display_probe(struct platform_device *pdev) return -EPROBE_DEFER; } + /* setup event q */ mutex_init(&dp->event_mutex); + init_waitqueue_head(&dp->event_q); + spin_lock_init(&dp->event_lock); /* Store DP audio handle inside DP display */ dp->dp_display.dp_audio = dp->audio; @@ -1441,8 +1460,6 @@ void msm_dp_irq_postinstall(struct msm_dp *dp_display) dp = container_of(dp_display, struct dp_display_private, dp_display); - dp_hpd_event_setup(dp); - dp_add_event(dp, EV_HPD_INIT_SETUP, 0, 100); }
Current DP driver implementation, event thread is kept running after DP display is unbind. This patch fix this problem by disabling DP irq and stop event thread to exit gracefully at dp_display_unbind(). Changes in v2: -- start event thread at dp_display_bind() Changes in v3: -- disable all HDP interrupts at unbind -- replace dp_hpd_event_setup() with dp_hpd_event_thread_start() -- replace dp_hpd_event_stop() with dp_hpd_event_thread_stop() -- move init_waitqueue_head(&dp->event_q) to probe() -- move spin_lock_init(&dp->event_lock) to probe() Changes in v4: -- relocate both dp_display_bind() and dp_display_unbind() to bottom of file Changes in v5: -- cancel relocation of both dp_display_bind() and dp_display_unbind() Changes in v6: -- move empty event q to dp_event_thread_start() Changes in v7: -- call ktheread_stop() directly instead of dp_hpd_event_thread_stop() function Fixes: e91e3065a806 ("drm/msm/dp: Add DP compliance tests on Snapdragon Chipsets") Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> --- drivers/gpu/drm/msm/dp/dp_display.c | 31 ++++++++++++++++++++++++------- 1 file changed, 24 insertions(+), 7 deletions(-)