diff mbox series

[v10,4/4] drm/msm/dp: Support the eDP modes given by panel

Message ID 1650887072-16652-5-git-send-email-quic_sbillaka@quicinc.com (mailing list archive)
State New, archived
Headers show
Series Add support for the eDP panel over aux_bus | expand

Commit Message

Sankeerth Billakanti (QUIC) April 25, 2022, 11:44 a.m. UTC 
The eDP controller does not have a reliable way keep panel
powered on to read the sink capabilities. So, the controller
driver cannot validate if a mode can be supported by the
source. We will rely on the panel driver to populate only
the supported modes for now.

Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
Changes in v10:
  - none 

Changes in v9:
  - none

Changes in v8:
  - add the drm/msm/dp tag in the commit title

 drivers/gpu/drm/msm/dp/dp_display.c | 8 ++++++++
 1 file changed, 8 insertions(+)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index fd1dddb9..637fb63 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -998,6 +998,14 @@  enum drm_mode_status dp_bridge_mode_valid(struct drm_bridge *bridge,
 		return -EINVAL;
 	}
 
+	/*
+	 * The eDP controller currently does not have a reliable way of
+	 * enabling panel power to read sink capabilities. So, we rely
+	 * on the panel driver to populate only supported modes for now.
+	 */
+	if (dp->is_edp)
+		return MODE_OK;
+
 	if ((dp->max_pclk_khz <= 0) ||
 			(dp->max_pclk_khz > DP_MAX_PIXEL_CLK_KHZ) ||
 			(mode->clock > dp->max_pclk_khz))