| Message ID | 1652384598-21586-1-git-send-email-quic_khsieh@quicinc.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v6] drm/msm/dp: Always clear mask bits to disable interrupts at dp_ctrl_reset_irq_ctrl() | expand |
Quoting Kuogee Hsieh (2022-05-12 12:43:18) > diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c > index af7a80c..f3e333e 100644 > --- a/drivers/gpu/drm/msm/dp/dp_ctrl.c > +++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c > @@ -1389,8 +1389,13 @@ void dp_ctrl_reset_irq_ctrl(struct dp_ctrl *dp_ctrl, bool enable) > > dp_catalog_ctrl_reset(ctrl->catalog); > > - if (enable) > - dp_catalog_ctrl_enable_irq(ctrl->catalog, enable); > + /* > + * all dp controller programmable registers will not > + * be reset to default value after DP_SW_RESET > + * therefore interrupt mask bits have to be updated > + * to enable/disable interrupts > + */ > + dp_catalog_ctrl_enable_irq(ctrl->catalog, enable); I think Dmitry requested that this part be split off to a different patch. It's fixing the call to dp_ctrl_reset_irq_ctrl() for the disable case. > } > > void dp_ctrl_phy_init(struct dp_ctrl *dp_ctrl) > diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c > index c388323..ab691aa 100644 > --- a/drivers/gpu/drm/msm/dp/dp_display.c > +++ b/drivers/gpu/drm/msm/dp/dp_display.c > @@ -98,6 +98,8 @@ struct dp_display_private { > struct dp_ctrl *ctrl; > struct dp_debug *debug; > > + bool suspended; > + Can we not have this flag? I also don't understand how this patch waits for the event queue to drain. There are now multiple places we check to see if we've suspended, but is it even possible to be in those places during suspend? What is wrong with moving to an irq thread? Is it because we want to wait for a modeset (EV_USER_NOTIFICATION)? > struct dp_usbpd_cb usbpd_cb; > struct dp_display_mode dp_mode; > struct msm_dp dp_display;
On 5/17/2022 1:25 AM, Stephen Boyd wrote: > Quoting Kuogee Hsieh (2022-05-12 12:43:18) >> diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c >> index af7a80c..f3e333e 100644 >> --- a/drivers/gpu/drm/msm/dp/dp_ctrl.c >> +++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c >> @@ -1389,8 +1389,13 @@ void dp_ctrl_reset_irq_ctrl(struct dp_ctrl *dp_ctrl, bool enable) >> >> dp_catalog_ctrl_reset(ctrl->catalog); >> >> - if (enable) >> - dp_catalog_ctrl_enable_irq(ctrl->catalog, enable); >> + /* >> + * all dp controller programmable registers will not >> + * be reset to default value after DP_SW_RESET >> + * therefore interrupt mask bits have to be updated >> + * to enable/disable interrupts >> + */ >> + dp_catalog_ctrl_enable_irq(ctrl->catalog, enable); > I think Dmitry requested that this part be split off to a different > patch. It's fixing the call to dp_ctrl_reset_irq_ctrl() for the disable > case. ok, will do that >> } >> >> void dp_ctrl_phy_init(struct dp_ctrl *dp_ctrl) >> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c >> index c388323..ab691aa 100644 >> --- a/drivers/gpu/drm/msm/dp/dp_display.c >> +++ b/drivers/gpu/drm/msm/dp/dp_display.c >> @@ -98,6 +98,8 @@ struct dp_display_private { >> struct dp_ctrl *ctrl; >> struct dp_debug *debug; >> >> + bool suspended; >> + > Can we not have this flag? I also don't understand how this patch waits > for the event queue to drain. There are now multiple places we check to > see if we've suspended, but is it even possible to be in those places > during suspend? What is wrong with moving to an irq thread? Is it > because we want to wait for a modeset (EV_USER_NOTIFICATION)? dp_pm_suspend happen after display off. therefore event q should be emptied when dp_pm_suspend called. since dp_pm_suspend and event_thread share an mutex, if suspended flag set at dp_pm_suspend which guarantee event thread will not be wakeed up to process since event q is empty. We used event q is to guarantee all events (irqs) are kept in event q with timing order (no any events missed) and executed later in timing order too to work the scenario likes dongle plug/unplugged several times consecutively. We used to workqueue but cause many synchronization issues. I will try thread_irq to see it will yield any advantage over kernel thread. >> struct dp_usbpd_cb usbpd_cb; >> struct dp_display_mode dp_mode; >> struct msm_dp dp_display;
diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c index af7a80c..f3e333e 100644 --- a/drivers/gpu/drm/msm/dp/dp_ctrl.c +++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c @@ -1389,8 +1389,13 @@ void dp_ctrl_reset_irq_ctrl(struct dp_ctrl *dp_ctrl, bool enable) dp_catalog_ctrl_reset(ctrl->catalog); - if (enable) - dp_catalog_ctrl_enable_irq(ctrl->catalog, enable); + /* + * all dp controller programmable registers will not + * be reset to default value after DP_SW_RESET + * therefore interrupt mask bits have to be updated + * to enable/disable interrupts + */ + dp_catalog_ctrl_enable_irq(ctrl->catalog, enable); } void dp_ctrl_phy_init(struct dp_ctrl *dp_ctrl) diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c index c388323..ab691aa 100644 --- a/drivers/gpu/drm/msm/dp/dp_display.c +++ b/drivers/gpu/drm/msm/dp/dp_display.c @@ -98,6 +98,8 @@ struct dp_display_private { struct dp_ctrl *ctrl; struct dp_debug *debug; + bool suspended; + struct dp_usbpd_cb usbpd_cb; struct dp_display_mode dp_mode; struct msm_dp dp_display; @@ -187,6 +189,11 @@ static int dp_add_event(struct dp_display_private *dp_priv, u32 event, int pndx; spin_lock_irqsave(&dp_priv->event_lock, flag); + if (dp_priv->suspended) { + spin_unlock_irqrestore(&dp_priv->event_lock, flag); + return -ENOENT; + } + pndx = dp_priv->event_pndx + 1; pndx %= DP_EVENT_Q_MAX; if (pndx == dp_priv->event_gndx) { @@ -454,7 +461,6 @@ static void dp_display_host_deinit(struct dp_display_private *dp) dp->dp_display.connector_type, dp->core_initialized, dp->phy_initialized); - dp_ctrl_reset_irq_ctrl(dp->ctrl, false); dp_aux_deinit(dp->aux); dp_power_deinit(dp->power); dp->core_initialized = false; @@ -1112,7 +1118,12 @@ static int hpd_event_thread(void *data) wait_event_interruptible(dp_priv->event_q, (dp_priv->event_pndx != dp_priv->event_gndx)); } + spin_lock_irqsave(&dp_priv->event_lock, flag); + if (dp_priv->suspended) { + spin_unlock_irqrestore(&dp_priv->event_lock, flag); + continue; + } todo = &dp_priv->event_list[dp_priv->event_gndx]; if (todo->delay) { struct dp_event *todo_next; @@ -1351,6 +1362,7 @@ static int dp_pm_resume(struct device *dev) struct platform_device *pdev = to_platform_device(dev); struct msm_dp *dp_display = platform_get_drvdata(pdev); struct dp_display_private *dp; + unsigned long flag; int sink_count = 0; dp = container_of(dp_display, struct dp_display_private, dp_display); @@ -1362,6 +1374,10 @@ static int dp_pm_resume(struct device *dev) dp->dp_display.connector_type, dp->core_initialized, dp->phy_initialized, dp_display->power_on); + spin_lock_irqsave(&dp->event_lock, flag); + dp->suspended = false; + spin_unlock_irqrestore(&dp->event_lock, flag); + /* start from disconnected state */ dp->hpd_state = ST_DISCONNECTED; @@ -1421,6 +1437,7 @@ static int dp_pm_suspend(struct device *dev) struct platform_device *pdev = to_platform_device(dev); struct msm_dp *dp_display = platform_get_drvdata(pdev); struct dp_display_private *dp; + unsigned long flag; dp = container_of(dp_display, struct dp_display_private, dp_display); @@ -1431,6 +1448,12 @@ static int dp_pm_suspend(struct device *dev) dp->dp_display.connector_type, dp->core_initialized, dp->phy_initialized, dp_display->power_on); + dp_ctrl_reset_irq_ctrl(dp->ctrl, false); + + spin_lock_irqsave(&dp->event_lock, flag); + dp->suspended = true; + spin_unlock_irqrestore(&dp->event_lock, flag); + /* mainlink enabled */ if (dp_power_clk_status(dp->power, DP_CTRL_PM)) dp_ctrl_off_link_stream(dp->ctrl);
dp_catalog_ctrl_reset() will software reset DP controller. But it will not reset programmable registers to default value. DP driver still have to clear mask bits to interrupt status registers to disable interrupts after software reset of controller. At current implementation, dp_ctrl_reset_irq_ctrl() will software reset dp controller but did not call dp_catalog_ctrl_enable_irq(false) to clear hpd related interrupt mask bits to disable hpd related interrupts due to it mistakenly think hpd related interrupt mask bits will be cleared by software reset of dp controller automatically. This mistake may cause system to crash during suspending procedure due to unexpected irq fired and trigger event thread to access dp controller registers with controller clocks are disabled. This patch fixes system crash during suspending problem by removing "enable" flag condition checking at dp_ctrl_reset_irq_ctrl() so that hpd related interrupt mask bits are cleared to prevent unexpected from happening. In addition, this patch also add suspended flag to prevent new events be added into event Q to wake up event thread after system suspended. Changes in v2: -- add more details commit text Changes in v3: -- add synchrons_irq() -- add atomic_t suspended Changes in v4: -- correct Fixes's commit ID -- remove synchrons_irq() Changes in v5: -- revise commit text Changes in v6: -- add event_lock to protect "suspended" Fixes: 989ebe7bc446 ("drm/msm/dp: do not initialize phy until plugin interrupt received") Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> --- drivers/gpu/drm/msm/dp/dp_ctrl.c | 9 +++++++-- drivers/gpu/drm/msm/dp/dp_display.c | 25 ++++++++++++++++++++++++- 2 files changed, 31 insertions(+), 3 deletions(-)