| Message ID | 1687364298-29430-2-git-send-email-quic_khsieh@quicinc.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | retrieve DSI DSC through priv-dsi[0] | expand |
On 21/06/2023 19:18, Kuogee Hsieh wrote: > Currently DSI DSC struct is populated at display setup during > system bootup. This mechanism works fine with embedded display > but not for pluggable displays as the DSC struct will become > stale once external display unplugged. > > Move storing of DSI DSC struct to both atomic_mode_set() and > atomic_enable() so that same mechanism will work for both > embedded display and pluggable displays. > > Changes in v4: > -- fix checkpatch.pl warning > > Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> > --- > drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 30 +++++++++++++++++++++++++---- > 1 file changed, 26 insertions(+), 4 deletions(-) > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c > index 2e1873d..367d374 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c > @@ -543,11 +543,24 @@ bool dpu_encoder_use_dsc_merge(struct drm_encoder *drm_enc) > return (num_dsc > 0) && (num_dsc > intf_count); > } > > +static struct drm_dsc_config *dpu_encoder_get_dsc_config(struct drm_encoder *drm_enc) > +{ > + struct msm_drm_private *priv = drm_enc->dev->dev_private; > + struct dpu_encoder_virt *dpu_enc = to_dpu_encoder_virt(drm_enc); > + int index = dpu_enc->disp_info.h_tile_instance[0]; > + > + if (dpu_enc->disp_info.intf_type == INTF_DSI) > + return msm_dsi_get_dsc_config(priv->dsi[index]); > + > + return NULL; > +} > + > static struct msm_display_topology dpu_encoder_get_topology( > struct dpu_encoder_virt *dpu_enc, > struct dpu_kms *dpu_kms, > struct drm_display_mode *mode, > - struct drm_crtc_state *crtc_state) > + struct drm_crtc_state *crtc_state, > + struct drm_dsc_config *dsc) > { > struct msm_display_topology topology = {0}; > int i, intf_count = 0; > @@ -579,7 +592,7 @@ static struct msm_display_topology dpu_encoder_get_topology( > > topology.num_intf = intf_count; > > - if (dpu_enc->dsc) { > + if (dsc) { > /* > * In case of Display Stream Compression (DSC), we would use > * 2 DSC encoders, 2 layer mixers and 1 interface > @@ -605,6 +618,7 @@ static int dpu_encoder_virt_atomic_check( > struct drm_display_mode *adj_mode; > struct msm_display_topology topology; > struct dpu_global_state *global_state; > + struct drm_dsc_config *dsc; > int i = 0; > int ret = 0; > > @@ -640,7 +654,9 @@ static int dpu_encoder_virt_atomic_check( > } > } > > - topology = dpu_encoder_get_topology(dpu_enc, dpu_kms, adj_mode, crtc_state); > + dsc = dpu_encoder_get_dsc_config(drm_enc); > + > + topology = dpu_encoder_get_topology(dpu_enc, dpu_kms, adj_mode, crtc_state, dsc); > > /* > * Release and Allocate resources on every modeset > @@ -1056,6 +1072,8 @@ static void dpu_encoder_virt_atomic_mode_set(struct drm_encoder *drm_enc, > > trace_dpu_enc_mode_set(DRMID(drm_enc)); > > + dpu_enc->dsc = dpu_encoder_get_dsc_config(drm_enc); > + > /* Query resource that have been reserved in atomic check step. */ > num_pp = dpu_rm_get_assigned_resources(&dpu_kms->rm, global_state, > drm_enc->base.id, DPU_HW_BLK_PINGPONG, hw_pp, > @@ -1187,6 +1205,8 @@ static void dpu_encoder_virt_atomic_enable(struct drm_encoder *drm_enc, > > dpu_enc = to_dpu_encoder_virt(drm_enc); > > + dpu_enc->dsc = dpu_encoder_get_dsc_config(drm_enc); Let's have a single place where dpu_enc->dsc is set. I have slight preference for atomic_enable, but atomic_mode_set is fine too. > + > mutex_lock(&dpu_enc->enc_lock); > cur_mode = &dpu_enc->base.crtc->state->adjusted_mode; > > @@ -2109,8 +2129,10 @@ void dpu_encoder_helper_phys_cleanup(struct dpu_encoder_phys *phys_enc) > phys_enc->hw_pp->merge_3d->idx); > } > > - if (dpu_enc->dsc) > + if (dpu_enc->dsc) { > dpu_encoder_unprep_dsc(dpu_enc); > + dpu_enc->dsc = NULL; > + } > > intf_cfg.stream_sel = 0; /* Don't care value for video mode */ > intf_cfg.mode_3d = dpu_encoder_helper_get_3d_blend_mode(phys_enc);
On 6/22/2023 7:00 AM, Dmitry Baryshkov wrote: > On 21/06/2023 19:18, Kuogee Hsieh wrote: >> Currently DSI DSC struct is populated at display setup during >> system bootup. This mechanism works fine with embedded display >> but not for pluggable displays as the DSC struct will become >> stale once external display unplugged. >> >> Move storing of DSI DSC struct to both atomic_mode_set() and >> atomic_enable() so that same mechanism will work for both >> embedded display and pluggable displays. >> >> Changes in v4: >> -- fix checkpatch.pl warning >> >> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> >> --- >> drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 30 >> +++++++++++++++++++++++++---- >> 1 file changed, 26 insertions(+), 4 deletions(-) >> >> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c >> b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c >> index 2e1873d..367d374 100644 >> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c >> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c >> @@ -543,11 +543,24 @@ bool dpu_encoder_use_dsc_merge(struct >> drm_encoder *drm_enc) >> return (num_dsc > 0) && (num_dsc > intf_count); >> } >> +static struct drm_dsc_config *dpu_encoder_get_dsc_config(struct >> drm_encoder *drm_enc) >> +{ >> + struct msm_drm_private *priv = drm_enc->dev->dev_private; >> + struct dpu_encoder_virt *dpu_enc = to_dpu_encoder_virt(drm_enc); >> + int index = dpu_enc->disp_info.h_tile_instance[0]; >> + >> + if (dpu_enc->disp_info.intf_type == INTF_DSI) >> + return msm_dsi_get_dsc_config(priv->dsi[index]); >> + >> + return NULL; >> +} >> + >> static struct msm_display_topology dpu_encoder_get_topology( >> struct dpu_encoder_virt *dpu_enc, >> struct dpu_kms *dpu_kms, >> struct drm_display_mode *mode, >> - struct drm_crtc_state *crtc_state) >> + struct drm_crtc_state *crtc_state, >> + struct drm_dsc_config *dsc) >> { >> struct msm_display_topology topology = {0}; >> int i, intf_count = 0; >> @@ -579,7 +592,7 @@ static struct msm_display_topology >> dpu_encoder_get_topology( >> topology.num_intf = intf_count; >> - if (dpu_enc->dsc) { >> + if (dsc) { >> /* >> * In case of Display Stream Compression (DSC), we would use >> * 2 DSC encoders, 2 layer mixers and 1 interface >> @@ -605,6 +618,7 @@ static int dpu_encoder_virt_atomic_check( >> struct drm_display_mode *adj_mode; >> struct msm_display_topology topology; >> struct dpu_global_state *global_state; >> + struct drm_dsc_config *dsc; >> int i = 0; >> int ret = 0; >> @@ -640,7 +654,9 @@ static int dpu_encoder_virt_atomic_check( >> } >> } >> - topology = dpu_encoder_get_topology(dpu_enc, dpu_kms, adj_mode, >> crtc_state); >> + dsc = dpu_encoder_get_dsc_config(drm_enc); >> + >> + topology = dpu_encoder_get_topology(dpu_enc, dpu_kms, adj_mode, >> crtc_state, dsc); >> /* >> * Release and Allocate resources on every modeset >> @@ -1056,6 +1072,8 @@ static void >> dpu_encoder_virt_atomic_mode_set(struct drm_encoder *drm_enc, >> trace_dpu_enc_mode_set(DRMID(drm_enc)); >> + dpu_enc->dsc = dpu_encoder_get_dsc_config(drm_enc); >> + >> /* Query resource that have been reserved in atomic check step. */ >> num_pp = dpu_rm_get_assigned_resources(&dpu_kms->rm, global_state, >> drm_enc->base.id, DPU_HW_BLK_PINGPONG, hw_pp, >> @@ -1187,6 +1205,8 @@ static void >> dpu_encoder_virt_atomic_enable(struct drm_encoder *drm_enc, >> dpu_enc = to_dpu_encoder_virt(drm_enc); >> + dpu_enc->dsc = dpu_encoder_get_dsc_config(drm_enc); > > Let's have a single place where dpu_enc->dsc is set. I have slight > preference for atomic_enable, but atomic_mode_set is fine too. > Yes, it was in a single place in v3. Then some mistake happened and it got dropped in v4. Now, it has been added back for v5. Sorry for the confusion.
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c index 2e1873d..367d374 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c @@ -543,11 +543,24 @@ bool dpu_encoder_use_dsc_merge(struct drm_encoder *drm_enc) return (num_dsc > 0) && (num_dsc > intf_count); } +static struct drm_dsc_config *dpu_encoder_get_dsc_config(struct drm_encoder *drm_enc) +{ + struct msm_drm_private *priv = drm_enc->dev->dev_private; + struct dpu_encoder_virt *dpu_enc = to_dpu_encoder_virt(drm_enc); + int index = dpu_enc->disp_info.h_tile_instance[0]; + + if (dpu_enc->disp_info.intf_type == INTF_DSI) + return msm_dsi_get_dsc_config(priv->dsi[index]); + + return NULL; +} + static struct msm_display_topology dpu_encoder_get_topology( struct dpu_encoder_virt *dpu_enc, struct dpu_kms *dpu_kms, struct drm_display_mode *mode, - struct drm_crtc_state *crtc_state) + struct drm_crtc_state *crtc_state, + struct drm_dsc_config *dsc) { struct msm_display_topology topology = {0}; int i, intf_count = 0; @@ -579,7 +592,7 @@ static struct msm_display_topology dpu_encoder_get_topology( topology.num_intf = intf_count; - if (dpu_enc->dsc) { + if (dsc) { /* * In case of Display Stream Compression (DSC), we would use * 2 DSC encoders, 2 layer mixers and 1 interface @@ -605,6 +618,7 @@ static int dpu_encoder_virt_atomic_check( struct drm_display_mode *adj_mode; struct msm_display_topology topology; struct dpu_global_state *global_state; + struct drm_dsc_config *dsc; int i = 0; int ret = 0; @@ -640,7 +654,9 @@ static int dpu_encoder_virt_atomic_check( } } - topology = dpu_encoder_get_topology(dpu_enc, dpu_kms, adj_mode, crtc_state); + dsc = dpu_encoder_get_dsc_config(drm_enc); + + topology = dpu_encoder_get_topology(dpu_enc, dpu_kms, adj_mode, crtc_state, dsc); /* * Release and Allocate resources on every modeset @@ -1056,6 +1072,8 @@ static void dpu_encoder_virt_atomic_mode_set(struct drm_encoder *drm_enc, trace_dpu_enc_mode_set(DRMID(drm_enc)); + dpu_enc->dsc = dpu_encoder_get_dsc_config(drm_enc); + /* Query resource that have been reserved in atomic check step. */ num_pp = dpu_rm_get_assigned_resources(&dpu_kms->rm, global_state, drm_enc->base.id, DPU_HW_BLK_PINGPONG, hw_pp, @@ -1187,6 +1205,8 @@ static void dpu_encoder_virt_atomic_enable(struct drm_encoder *drm_enc, dpu_enc = to_dpu_encoder_virt(drm_enc); + dpu_enc->dsc = dpu_encoder_get_dsc_config(drm_enc); + mutex_lock(&dpu_enc->enc_lock); cur_mode = &dpu_enc->base.crtc->state->adjusted_mode; @@ -2109,8 +2129,10 @@ void dpu_encoder_helper_phys_cleanup(struct dpu_encoder_phys *phys_enc) phys_enc->hw_pp->merge_3d->idx); } - if (dpu_enc->dsc) + if (dpu_enc->dsc) { dpu_encoder_unprep_dsc(dpu_enc); + dpu_enc->dsc = NULL; + } intf_cfg.stream_sel = 0; /* Don't care value for video mode */ intf_cfg.mode_3d = dpu_encoder_helper_get_3d_blend_mode(phys_enc);
Currently DSI DSC struct is populated at display setup during system bootup. This mechanism works fine with embedded display but not for pluggable displays as the DSC struct will become stale once external display unplugged. Move storing of DSI DSC struct to both atomic_mode_set() and atomic_enable() so that same mechanism will work for both embedded display and pluggable displays. Changes in v4: -- fix checkpatch.pl warning Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> --- drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 30 +++++++++++++++++++++++++---- 1 file changed, 26 insertions(+), 4 deletions(-)