@@ -291,6 +291,9 @@ static ssize_t dp_aux_transfer(struct drm_dp_aux *dp_aux,
return -EINVAL;
}
+ if (pm_runtime_resume_and_get(dp_aux->dev))
+ return -EINVAL;
+
mutex_lock(&aux->mutex);
if (!aux->initted) {
ret = -EIO;
@@ -364,6 +367,8 @@ static ssize_t dp_aux_transfer(struct drm_dp_aux *dp_aux,
exit:
mutex_unlock(&aux->mutex);
+ pm_runtime_mark_last_busy(dp_aux->dev);
+ pm_runtime_put_autosuspend(dp_aux->dev);
return ret;
}
@@ -60,6 +60,8 @@ enum {
EV_IRQ_HPD_INT,
EV_HPD_UNPLUG_INT,
EV_USER_NOTIFICATION,
+ EV_POWER_PM_GET,
+ EV_POWER_PM_PUT,
};
#define EVENT_TIMEOUT (HZ/10) /* 100ms */
@@ -276,13 +278,6 @@ static int dp_display_bind(struct device *dev, struct device *master,
dp->dp_display.drm_dev = drm;
priv->dp[dp->id] = &dp->dp_display;
- rc = dp->parser->parse(dp->parser);
- if (rc) {
- DRM_ERROR("device tree parsing failed\n");
- goto end;
- }
-
-
dp->drm_dev = drm;
dp->aux->drm_dev = drm;
rc = dp_aux_register(dp->aux);
@@ -291,12 +286,6 @@ static int dp_display_bind(struct device *dev, struct device *master,
goto end;
}
- rc = dp_power_client_init(dp->power);
- if (rc) {
- DRM_ERROR("Power client create failed\n");
- goto end;
- }
-
rc = dp_register_audio_driver(dev, dp->audio);
if (rc) {
DRM_ERROR("Audio registration Dp failed\n");
@@ -320,10 +309,6 @@ static void dp_display_unbind(struct device *dev, struct device *master,
struct dp_display_private *dp = dev_get_dp_display_private(dev);
struct msm_drm_private *priv = dev_get_drvdata(master);
- /* disable all HPD interrupts */
- if (dp->core_initialized)
- dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_INT_MASK, false);
-
kthread_stop(dp->ev_tsk);
of_dp_aux_depopulate_bus(dp->aux);
@@ -467,6 +452,18 @@ static void dp_display_host_deinit(struct dp_display_private *dp)
dp->core_initialized = false;
}
+static void dp_display_pm_get(struct dp_display_private *dp)
+{
+ if (pm_runtime_resume_and_get(&dp->pdev->dev))
+ DRM_ERROR("failed to start power\n");
+}
+
+static void dp_display_pm_put(struct dp_display_private *dp)
+{
+ pm_runtime_mark_last_busy(&dp->pdev->dev);
+ pm_runtime_put_autosuspend(&dp->pdev->dev);
+}
+
static int dp_display_usbpd_configure_cb(struct device *dev)
{
struct dp_display_private *dp = dev_get_dp_display_private(dev);
@@ -1096,7 +1093,6 @@ static int hpd_event_thread(void *data)
switch (todo->event_id) {
case EV_HPD_INIT_SETUP:
- dp_display_host_init(dp_priv);
break;
case EV_HPD_PLUG_INT:
dp_hpd_plug_handle(dp_priv, todo->data);
@@ -1111,6 +1107,12 @@ static int hpd_event_thread(void *data)
dp_display_send_hpd_notification(dp_priv,
todo->data);
break;
+ case EV_POWER_PM_GET:
+ dp_display_pm_get(dp_priv);
+ break;
+ case EV_POWER_PM_PUT:
+ dp_display_pm_put(dp_priv);
+ break;
default:
break;
}
@@ -1251,6 +1253,18 @@ static int dp_display_probe(struct platform_device *pdev)
return -EPROBE_DEFER;
}
+ rc = dp->parser->parse(dp->parser);
+ if (rc) {
+ DRM_ERROR("device tree parsing failed\n");
+ return -EPROBE_DEFER;
+ }
+
+ rc = dp_power_client_init(dp->power);
+ if (rc) {
+ DRM_ERROR("Power client create failed\n");
+ return -EPROBE_DEFER;
+ }
+
/* setup event q */
mutex_init(&dp->event_mutex);
init_waitqueue_head(&dp->event_q);
@@ -1263,6 +1277,10 @@ static int dp_display_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, &dp->dp_display);
+ devm_pm_runtime_enable(&pdev->dev);
+ pm_runtime_set_autosuspend_delay(&pdev->dev, 1000);
+ pm_runtime_use_autosuspend(&pdev->dev);
+
rc = dp_display_request_irq(dp);
if (rc)
return rc;
@@ -1285,6 +1303,36 @@ static int dp_display_remove(struct platform_device *pdev)
platform_set_drvdata(pdev, NULL);
+ pm_runtime_put_sync_suspend(&pdev->dev);
+ pm_runtime_dont_use_autosuspend(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+
+ return 0;
+}
+
+static int dp_pm_runtime_suspend(struct device *dev)
+{
+ struct dp_display_private *dp = dev_get_dp_display_private(dev);
+
+ if (dp->dp_display.is_edp) {
+ dp_display_host_phy_exit(dp);
+ dp_catalog_ctrl_hpd_disable(dp->catalog);
+ }
+ dp_display_host_deinit(dp);
+
+ return 0;
+}
+
+static int dp_pm_runtime_resume(struct device *dev)
+{
+ struct dp_display_private *dp = dev_get_dp_display_private(dev);
+
+ dp_display_host_init(dp);
+ if (dp->dp_display.is_edp) {
+ dp_catalog_ctrl_hpd_enable(dp->catalog);
+ dp_display_host_phy_init(dp);
+ }
+
return 0;
}
@@ -1389,6 +1437,7 @@ static int dp_pm_suspend(struct device *dev)
}
static const struct dev_pm_ops dp_pm_ops = {
+ SET_RUNTIME_PM_OPS(dp_pm_runtime_suspend, dp_pm_runtime_resume, NULL)
.suspend = dp_pm_suspend,
.resume = dp_pm_resume,
};
@@ -1473,10 +1522,6 @@ static int dp_display_get_next_bridge(struct msm_dp *dp)
aux_bus = of_get_child_by_name(dev->of_node, "aux-bus");
if (aux_bus && dp->is_edp) {
- dp_display_host_init(dp_priv);
- dp_catalog_ctrl_hpd_enable(dp_priv->catalog);
- dp_display_host_phy_init(dp_priv);
-
/*
* The code below assumes that the panel will finish probing
* by the time devm_of_dp_aux_populate_ep_devices() returns.
@@ -1578,6 +1623,11 @@ void dp_bridge_atomic_enable(struct drm_bridge *drm_bridge,
dp_hpd_plug_handle(dp_display, 0);
mutex_lock(&dp_display->event_mutex);
+ if (pm_runtime_resume_and_get(&dp_display->pdev->dev)) {
+ DRM_ERROR("failed to start power\n");
+ mutex_unlock(&dp_display->event_mutex);
+ return;
+ }
state = dp_display->hpd_state;
if (state != ST_DISPLAY_OFF && state != ST_MAINLINK_READY) {
@@ -1658,6 +1708,8 @@ void dp_bridge_atomic_post_disable(struct drm_bridge *drm_bridge,
}
drm_dbg_dp(dp->drm_dev, "type=%d Done\n", dp->connector_type);
+
+ pm_runtime_put_sync(&dp_display->pdev->dev);
mutex_unlock(&dp_display->event_mutex);
}
@@ -1697,6 +1749,9 @@ void dp_bridge_hpd_enable(struct drm_bridge *bridge)
struct dp_display_private *dp = container_of(dp_display, struct dp_display_private, dp_display);
mutex_lock(&dp->event_mutex);
+ if (pm_runtime_resume_and_get(&dp->pdev->dev))
+ DRM_ERROR("failed to start power\n");
+
dp_catalog_ctrl_hpd_enable(dp->catalog);
/* enable HDP interrupts */
@@ -1718,6 +1773,9 @@ void dp_bridge_hpd_disable(struct drm_bridge *bridge)
dp_catalog_ctrl_hpd_disable(dp->catalog);
dp_display->internal_hpd = false;
+
+ pm_runtime_mark_last_busy(&dp->pdev->dev);
+ pm_runtime_put_autosuspend(&dp->pdev->dev);
mutex_unlock(&dp->event_mutex);
}
@@ -1732,13 +1790,11 @@ void dp_bridge_hpd_notify(struct drm_bridge *bridge,
if (dp_display->internal_hpd)
return;
- if (!dp->core_initialized) {
- drm_dbg_dp(dp->drm_dev, "not initialized\n");
- return;
- }
-
- if (!dp_display->link_ready && status == connector_status_connected)
+ if (!dp_display->link_ready && status == connector_status_connected) {
+ dp_add_event(dp, EV_POWER_PM_GET, 0, 0);
dp_add_event(dp, EV_HPD_PLUG_INT, 0, 0);
- else if (dp_display->link_ready && status == connector_status_disconnected)
+ } else if (dp_display->link_ready && status == connector_status_disconnected) {
dp_add_event(dp, EV_HPD_UNPLUG_INT, 0, 0);
+ dp_add_event(dp, EV_POWER_PM_PUT, 0, 0);
+ }
}
@@ -152,8 +152,6 @@ int dp_power_client_init(struct dp_power *dp_power)
power = container_of(dp_power, struct dp_power_private, dp_power);
- pm_runtime_enable(power->dev);
-
return dp_power_clk_init(power);
}
@@ -162,8 +160,6 @@ void dp_power_client_deinit(struct dp_power *dp_power)
struct dp_power_private *power;
power = container_of(dp_power, struct dp_power_private, dp_power);
-
- pm_runtime_disable(power->dev);
}
int dp_power_init(struct dp_power *dp_power)
@@ -173,11 +169,7 @@ int dp_power_init(struct dp_power *dp_power)
power = container_of(dp_power, struct dp_power_private, dp_power);
- pm_runtime_get_sync(power->dev);
-
rc = dp_power_clk_enable(dp_power, DP_CORE_PM, true);
- if (rc)
- pm_runtime_put_sync(power->dev);
return rc;
}
@@ -189,7 +181,6 @@ int dp_power_deinit(struct dp_power *dp_power)
power = container_of(dp_power, struct dp_power_private, dp_power);
dp_power_clk_enable(dp_power, DP_CORE_PM, false);
- pm_runtime_put_sync(power->dev);
return 0;
}
Currently DP driver is executed independent of PM runtime framework. This lead DP driver incompatible with others. Incorporating pm runtime framework into DP driver so that both power and clocks to enable/disable host controller fits with PM runtime mechanism. Once pm runtime framework is incorporated into DP driver, wake up device from power up path is not necessary. Hence remove it. Both EV_POWER_PM_GET and EV_POWER_PM_PUT events are introduced to perform pm runtime control for the HPD GPIO routing to a display-connector case. Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> --- drivers/gpu/drm/msm/dp/dp_aux.c | 5 ++ drivers/gpu/drm/msm/dp/dp_display.c | 114 +++++++++++++++++++++++++++--------- drivers/gpu/drm/msm/dp/dp_power.c | 9 --- 3 files changed, 90 insertions(+), 38 deletions(-)