@@ -1333,101 +1333,35 @@ static int dp_pm_runtime_resume(struct device *dev)
return 0;
}
-static int dp_pm_resume(struct device *dev)
+static void dp_pm_complete(struct device *dev)
{
- struct platform_device *pdev = to_platform_device(dev);
- struct msm_dp *dp_display = platform_get_drvdata(pdev);
- struct dp_display_private *dp;
- int sink_count = 0;
-
- dp = container_of(dp_display, struct dp_display_private, dp_display);
+ struct dp_display_private *dp = dev_get_dp_display_private(dev);
mutex_lock(&dp->event_mutex);
drm_dbg_dp(dp->drm_dev,
- "Before, type=%d core_inited=%d phy_inited=%d power_on=%d\n",
+ "type=%d core_inited=%d phy_inited=%d power_on=%d\n",
dp->dp_display.connector_type, dp->core_initialized,
- dp->phy_initialized, dp_display->power_on);
+ dp->phy_initialized, dp->dp_display.power_on);
/* start from disconnected state */
dp->hpd_state = ST_DISCONNECTED;
- /* turn on dp ctrl/phy */
- dp_display_host_init(dp);
-
- if (dp_display->is_edp)
- dp_catalog_ctrl_hpd_enable(dp->catalog);
-
- if (dp_catalog_link_is_connected(dp->catalog)) {
- /*
- * set sink to normal operation mode -- D0
- * before dpcd read
- */
- dp_display_host_phy_init(dp);
- dp_link_psm_config(dp->link, &dp->panel->link_info, false);
- sink_count = drm_dp_read_sink_count(dp->aux);
- if (sink_count < 0)
- sink_count = 0;
-
- dp_display_host_phy_exit(dp);
- }
-
- dp->link->sink_count = sink_count;
- /*
- * can not declared display is connected unless
- * HDMI cable is plugged in and sink_count of
- * dongle become 1
- * also only signal audio when disconnected
- */
- if (dp->link->sink_count) {
- dp->dp_display.link_ready = true;
- } else {
- dp->dp_display.link_ready = false;
- dp_display_handle_plugged_change(dp_display, false);
- }
-
- drm_dbg_dp(dp->drm_dev,
- "After, type=%d sink=%d conn=%d core_init=%d phy_init=%d power=%d\n",
- dp->dp_display.connector_type, dp->link->sink_count,
- dp->dp_display.link_ready, dp->core_initialized,
- dp->phy_initialized, dp_display->power_on);
-
mutex_unlock(&dp->event_mutex);
-
- return 0;
}
-static int dp_pm_suspend(struct device *dev)
+static int dp_pm_prepare(struct device *dev)
{
- struct platform_device *pdev = to_platform_device(dev);
- struct msm_dp *dp_display = platform_get_drvdata(pdev);
- struct dp_display_private *dp;
-
- dp = container_of(dp_display, struct dp_display_private, dp_display);
+ struct dp_display_private *dp = dev_get_dp_display_private(dev);
mutex_lock(&dp->event_mutex);
- drm_dbg_dp(dp->drm_dev,
- "Before, type=%d core_inited=%d phy_inited=%d power_on=%d\n",
- dp->dp_display.connector_type, dp->core_initialized,
- dp->phy_initialized, dp_display->power_on);
-
/* mainlink enabled */
if (dp_power_clk_status(dp->power, DP_CTRL_PM))
dp_ctrl_off_link_stream(dp->ctrl);
- dp_display_host_phy_exit(dp);
-
- /* host_init will be called at pm_resume */
- dp_display_host_deinit(dp);
-
dp->hpd_state = ST_SUSPENDED;
- drm_dbg_dp(dp->drm_dev,
- "After, type=%d core_inited=%d phy_inited=%d power_on=%d\n",
- dp->dp_display.connector_type, dp->core_initialized,
- dp->phy_initialized, dp_display->power_on);
-
mutex_unlock(&dp->event_mutex);
return 0;
@@ -1435,8 +1369,10 @@ static int dp_pm_suspend(struct device *dev)
static const struct dev_pm_ops dp_pm_ops = {
SET_RUNTIME_PM_OPS(dp_pm_runtime_suspend, dp_pm_runtime_resume, NULL)
- .suspend = dp_pm_suspend,
- .resume = dp_pm_resume,
+ SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+ pm_runtime_force_resume)
+ .prepare = dp_pm_prepare,
+ .complete = dp_pm_complete,
};
static struct platform_driver dp_display_driver = {
@@ -1670,9 +1606,6 @@ void dp_bridge_atomic_post_disable(struct drm_bridge *drm_bridge,
dp_display = container_of(dp, struct dp_display_private, dp_display);
- if (dp->is_edp)
- dp_hpd_unplug_handle(dp_display, 0);
-
mutex_lock(&dp_display->event_mutex);
state = dp_display->hpd_state;
Add pm_runtime_force_suspend()/resume() to complete incorporating pm runtime framework into DP driver. Both dp_pm_prepare() and dp_pm_complete() are added to set hpd_state to correct state. After resume, DP driver will re training its main link after .hpd_enable() callback enabled HPD interrupts and bring up display accordingly. Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> --- drivers/gpu/drm/msm/dp/dp_display.c | 87 +++++-------------------------------- 1 file changed, 10 insertions(+), 77 deletions(-)