@@ -507,6 +507,21 @@ void dp_aux_unregister(struct drm_dp_aux *dp_aux)
drm_dp_aux_unregister(dp_aux);
}
+static int dp_wait_hpd_asserted(struct drm_dp_aux *dp_aux,
+ unsigned long wait_us)
+{
+ int ret;
+ struct dp_aux_private *aux;
+
+ aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
+
+ pm_runtime_get_sync(aux->dev);
+ ret = dp_catalog_aux_wait_for_hpd_connect_state(aux->catalog);
+ pm_runtime_put_sync(aux->dev);
+
+ return ret;
+}
+
struct drm_dp_aux *dp_aux_get(struct device *dev, struct dp_catalog *catalog,
bool is_edp)
{
@@ -530,6 +545,16 @@ struct drm_dp_aux *dp_aux_get(struct device *dev, struct dp_catalog *catalog,
aux->catalog = catalog;
aux->retry_cnt = 0;
+ /*
+ * Use the drm_dp_aux_init() to use the aux adapter
+ * before registering aux with the DRM device.
+ */
+ aux->dp_aux.name = "dpu_dp_aux";
+ aux->dp_aux.dev = dev;
+ aux->dp_aux.transfer = dp_aux_transfer;
+ aux->dp_aux.wait_hpd_asserted = dp_wait_hpd_asserted;
+ drm_dp_aux_init(&aux->dp_aux);
+
return &aux->dp_aux;
}
@@ -310,8 +310,6 @@ static void dp_display_unbind(struct device *dev, struct device *master,
kthread_stop(dp->ev_tsk);
- of_dp_aux_depopulate_bus(dp->aux);
-
dp_power_client_deinit(dp->power);
dp_unregister_audio_driver(dev, dp->audio);
dp_aux_unregister(dp->aux);
@@ -1217,6 +1215,31 @@ static const struct msm_dp_desc *dp_display_get_desc(struct platform_device *pde
return NULL;
}
+static int dp_auxbus_done_probe(struct drm_dp_aux *aux)
+{
+ int rc;
+
+ rc = component_add(aux->dev, &dp_display_comp_ops);
+ if (rc)
+ DRM_ERROR("eDP component add failed, rc=%d\n", rc);
+
+ return rc;
+}
+
+static int dp_display_auxbus_population(struct dp_display_private *dp)
+{
+ struct device *dev = &dp->pdev->dev;
+ struct device_node *aux_bus;
+ int ret = 0;
+
+ aux_bus = of_get_child_by_name(dev->of_node, "aux-bus");
+
+ if (aux_bus)
+ ret = devm_of_dp_aux_populate_bus(dp->aux, dp_auxbus_done_probe);
+
+ return ret;
+}
+
static int dp_display_probe(struct platform_device *pdev)
{
int rc = 0;
@@ -1282,10 +1305,16 @@ static int dp_display_probe(struct platform_device *pdev)
if (rc)
return rc;
- rc = component_add(&pdev->dev, &dp_display_comp_ops);
- if (rc) {
- DRM_ERROR("component add failed, rc=%d\n", rc);
- dp_display_deinit_sub_modules(dp);
+ if (dp->dp_display.is_edp) {
+ rc = dp_display_auxbus_population(dp);
+ if (rc)
+ DRM_ERROR("eDP auxbus population failed, rc=%d\n", rc);
+ } else {
+ rc = component_add(&pdev->dev, &dp_display_comp_ops);
+ if (rc) {
+ DRM_ERROR("component add failed, rc=%d\n", rc);
+ dp_display_deinit_sub_modules(dp);
+ }
}
return rc;
@@ -1296,14 +1325,13 @@ static int dp_display_remove(struct platform_device *pdev)
struct dp_display_private *dp = dev_get_dp_display_private(&pdev->dev);
component_del(&pdev->dev, &dp_display_comp_ops);
- dp_display_deinit_sub_modules(dp);
-
platform_set_drvdata(pdev, NULL);
- pm_runtime_put_sync_suspend(&pdev->dev);
pm_runtime_dont_use_autosuspend(&pdev->dev);
pm_runtime_disable(&pdev->dev);
+ dp_display_deinit_sub_modules(dp);
+
return 0;
}
@@ -1432,31 +1460,10 @@ void msm_dp_debugfs_init(struct msm_dp *dp_display, struct drm_minor *minor)
static int dp_display_get_next_bridge(struct msm_dp *dp)
{
- int rc;
+ int rc = 0;
struct dp_display_private *dp_priv;
- struct device_node *aux_bus;
- struct device *dev;
dp_priv = container_of(dp, struct dp_display_private, dp_display);
- dev = &dp_priv->pdev->dev;
- aux_bus = of_get_child_by_name(dev->of_node, "aux-bus");
-
- if (aux_bus && dp->is_edp) {
- /*
- * The code below assumes that the panel will finish probing
- * by the time devm_of_dp_aux_populate_ep_devices() returns.
- * This isn't a great assumption since it will fail if the
- * panel driver is probed asynchronously but is the best we
- * can do without a bigger driver reorganization.
- */
- rc = of_dp_aux_populate_bus(dp_priv->aux, NULL);
- of_node_put(aux_bus);
- if (rc)
- goto error;
- } else if (dp->is_edp) {
- DRM_ERROR("eDP aux_bus not found\n");
- return -ENODEV;
- }
/*
* External bridges are mandatory for eDP interfaces: one has to
@@ -1469,17 +1476,9 @@ static int dp_display_get_next_bridge(struct msm_dp *dp)
if (!dp->is_edp && rc == -ENODEV)
return 0;
- if (!rc) {
+ if (!rc)
dp->next_bridge = dp_priv->parser->next_bridge;
- return 0;
- }
-error:
- if (dp->is_edp) {
- of_dp_aux_depopulate_bus(dp_priv->aux);
- dp_display_host_phy_exit(dp_priv);
- dp_display_host_deinit(dp_priv);
- }
return rc;
}
Currently eDP population is done at msm_dp_modeset_init() which happen at binding time. Move eDP population to be done at display probe time so that probe deferral cases can be handled effectively. wait_for_hpd_asserted callback is added during drm_dp_aux_init() to ensure eDP's HPD is up before proceeding eDP population. Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> --- drivers/gpu/drm/msm/dp/dp_aux.c | 25 ++++++++++++ drivers/gpu/drm/msm/dp/dp_display.c | 79 ++++++++++++++++++------------------- 2 files changed, 64 insertions(+), 40 deletions(-)