| Message ID | 20140514224339.7f8be3a9@neptune.home (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wed, May 14, 2014 at 10:43:39PM +0200, Bruno Prémont wrote: > With commit b4aa0163056b6c70029b6e8619ce07c274351f42 Matthew Garret I think there's an emerging convention to use reference commits as <12-char-SHA1> ("subject"), i.e., b4aa0163056b ("efifb: Implement vga_default_device() (v2)") for this case. Also, s/Garret/Garrett/. > introduced a efifb vga_default_device() so that EFI systems that do not > load shadow VBIOS or setup VGA get proper value for boot_vga PCI sysfs > attribute on the corresponding PCI device. > > Xorg is refusing to autodetect devices when boot_vga=0 which is the case > on some EFI system (e.g. MacBookAir2,1). Xorg detects the GPU and finds > the dri device but then bails out with "no devices detected". > > With introduction of sysfb/simplefb/simpledrm efifb is getting obsolete > while having native drivers for the GPU also makes selecting > sysfb/efifb optional. > > Remove the efifb implementation of vga_default_device() and initialize > vgaarb's vga_default_device() with the PCI GPU that matches boot > screen_info in pci_fixup_video() [x86 and ia64 pci_fixup_video merged > into common function in vgaarb.c]. I think it would be good to split this into two patches: 1) Merge the x86 and ia64 pci_fixup_video() implementations. This should have no functional change at all. 2) Whatever else you need to actually fix the bug. This will be much smaller, and the actual bug fix will be easier to see. It would also be nice to have a URL for a bugzilla or mailing list report of the problem, where there might be dmesg and/or Xorg logs. This sounds like it might be applicable for the stable kernels. If so, you probably should order these so the small bug-fix comes first (even though this may mean applying the same bugfix for x86 and ia64), and the merge second. That way the fix can be applied to the stable kernels without the merge. > Other architectures with PCI GPU might need a similar fixup. > > Note: If CONFIG_VGA_ARB is unset vga_default_device() is only available > as a stub that returns NULL, making this adjustment insufficient. > In addition, with the merge of x86/ia64 fixup code, this would > also result in disabled fixup. > Unsetting CONFIG_VGA_ARB requires CONFIG_EXPERT=y though. I'm not quite sure what this means, or if this is hint that something is still wrong even with this patch. Do you mean that if CONFIG_VGA_ARB is unset, something still doesn't work? Maybe this will become obvious to me when you split up the patch. > Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> > --- > This is ported to changes in pci/fixup.c that landed in 3.15-rcs. > > Is this fine to go in, if so who will take it? > > I got no feedback on my last respin (on top of 3.14 a couple of weeks ago, > which added moving the ia64 pci boot_vga fixup). > I've been running this revision for a week or so on 3.15-rc kernels here > (mostly EFI-enabled system, the mentioned MBA as wells as non-Apple systems > where the patch was not required). > > > arch/ia64/pci/fixup.c | 56 ++------------------------------- > arch/x86/include/asm/vga.h | 6 ---- > arch/x86/pci/fixup.c | 55 +-------------------------------- > drivers/gpu/vga/vgaarb.c | 75 +++++++++++++++++++++++++++++++++++++++++++++ > drivers/video/fbdev/efifb.c | 38 ----------------------- > include/linux/vgaarb.h | 37 ++++++++++++++++++++++ > 6 files changed, 116 insertions(+), 151 deletions(-) > > diff --git a/arch/ia64/pci/fixup.c b/arch/ia64/pci/fixup.c > index eee069a..5df22f9 100644 > --- a/arch/ia64/pci/fixup.c > +++ b/arch/ia64/pci/fixup.c > @@ -9,64 +9,14 @@ > > #include <asm/machvec.h> > > -/* > - * Fixup to mark boot BIOS video selected by BIOS before it changes > - * > - * From information provided by "Jon Smirl" <jonsmirl@gmail.com> > - * > - * The standard boot ROM sequence for an x86 machine uses the BIOS > - * to select an initial video card for boot display. This boot video > - * card will have it's BIOS copied to C0000 in system RAM. > - * IORESOURCE_ROM_SHADOW is used to associate the boot video > - * card with this copy. On laptops this copy has to be used since > - * the main ROM may be compressed or combined with another image. > - * See pci_map_rom() for use of this flag. Before marking the device > - * with IORESOURCE_ROM_SHADOW check if a vga_default_device is already set > - * by either arch cde or vga-arbitration, if so only apply the fixup to this > - * already determined primary video card. > - */ > - > -static void pci_fixup_video(struct pci_dev *pdev) > +static void pci_ia64_fixup_video(struct pci_dev *pdev) > { > - struct pci_dev *bridge; > - struct pci_bus *bus; > - u16 config; > - > if ((strcmp(ia64_platform_name, "dig") != 0) > && (strcmp(ia64_platform_name, "hpzx1") != 0)) > return; > /* Maybe, this machine supports legacy memory map. */ > > - /* Is VGA routed to us? */ > - bus = pdev->bus; > - while (bus) { > - bridge = bus->self; > - > - /* > - * From information provided by > - * "David Miller" <davem@davemloft.net> > - * The bridge control register is valid for PCI header > - * type BRIDGE, or CARDBUS. Host to PCI controllers use > - * PCI header type NORMAL. > - */ > - if (bridge > - &&((bridge->hdr_type == PCI_HEADER_TYPE_BRIDGE) > - ||(bridge->hdr_type == PCI_HEADER_TYPE_CARDBUS))) { > - pci_read_config_word(bridge, PCI_BRIDGE_CONTROL, > - &config); > - if (!(config & PCI_BRIDGE_CTL_VGA)) > - return; > - } > - bus = bus->parent; > - } > - if (!vga_default_device() || pdev == vga_default_device()) { > - pci_read_config_word(pdev, PCI_COMMAND, &config); > - if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) { > - pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW; > - dev_printk(KERN_DEBUG, &pdev->dev, "Boot video device\n"); > - vga_set_default_device(pdev); > - } > - } > + pci_fixup_video(pdev); > } > DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID, > - PCI_CLASS_DISPLAY_VGA, 8, pci_fixup_video); > + PCI_CLASS_DISPLAY_VGA, 8, pci_ia64_fixup_video); > diff --git a/arch/x86/include/asm/vga.h b/arch/x86/include/asm/vga.h > index 44282fb..c4b9dc2 100644 > --- a/arch/x86/include/asm/vga.h > +++ b/arch/x86/include/asm/vga.h > @@ -17,10 +17,4 @@ > #define vga_readb(x) (*(x)) > #define vga_writeb(x, y) (*(y) = (x)) > > -#ifdef CONFIG_FB_EFI > -#define __ARCH_HAS_VGA_DEFAULT_DEVICE > -extern struct pci_dev *vga_default_device(void); > -extern void vga_set_default_device(struct pci_dev *pdev); > -#endif > - > #endif /* _ASM_X86_VGA_H */ > diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c > index 94ae9ae..b599847 100644 > --- a/arch/x86/pci/fixup.c > +++ b/arch/x86/pci/fixup.c > @@ -302,60 +302,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PB1, pcie_r > DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PC, pcie_rootport_aspm_quirk); > DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PC1, pcie_rootport_aspm_quirk); > > -/* > - * Fixup to mark boot BIOS video selected by BIOS before it changes > - * > - * From information provided by "Jon Smirl" <jonsmirl@gmail.com> > - * > - * The standard boot ROM sequence for an x86 machine uses the BIOS > - * to select an initial video card for boot display. This boot video > - * card will have it's BIOS copied to C0000 in system RAM. > - * IORESOURCE_ROM_SHADOW is used to associate the boot video > - * card with this copy. On laptops this copy has to be used since > - * the main ROM may be compressed or combined with another image. > - * See pci_map_rom() for use of this flag. Before marking the device > - * with IORESOURCE_ROM_SHADOW check if a vga_default_device is already set > - * by either arch cde or vga-arbitration, if so only apply the fixup to this > - * already determined primary video card. > - */ > - > -static void pci_fixup_video(struct pci_dev *pdev) > -{ > - struct pci_dev *bridge; > - struct pci_bus *bus; > - u16 config; > - > - /* Is VGA routed to us? */ > - bus = pdev->bus; > - while (bus) { > - bridge = bus->self; > - > - /* > - * From information provided by > - * "David Miller" <davem@davemloft.net> > - * The bridge control register is valid for PCI header > - * type BRIDGE, or CARDBUS. Host to PCI controllers use > - * PCI header type NORMAL. > - */ > - if (bridge > - && ((bridge->hdr_type == PCI_HEADER_TYPE_BRIDGE) > - || (bridge->hdr_type == PCI_HEADER_TYPE_CARDBUS))) { > - pci_read_config_word(bridge, PCI_BRIDGE_CONTROL, > - &config); > - if (!(config & PCI_BRIDGE_CTL_VGA)) > - return; > - } > - bus = bus->parent; > - } > - if (!vga_default_device() || pdev == vga_default_device()) { > - pci_read_config_word(pdev, PCI_COMMAND, &config); > - if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) { > - pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW; > - dev_printk(KERN_DEBUG, &pdev->dev, "Boot video device\n"); > - vga_set_default_device(pdev); > - } > - } > -} > +/* pci_fixup_video shared in vgaarb.c */ > DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID, > PCI_CLASS_DISPLAY_VGA, 8, pci_fixup_video); > > diff --git a/drivers/gpu/vga/vgaarb.c b/drivers/gpu/vga/vgaarb.c > index af02597..f0fbdf6 100644 > --- a/drivers/gpu/vga/vgaarb.c > +++ b/drivers/gpu/vga/vgaarb.c > @@ -149,6 +149,81 @@ void vga_set_default_device(struct pci_dev *pdev) > } > #endif > > +/* > + * Fixup to mark boot BIOS video selected by BIOS before it changes > + * > + * From information provided by "Jon Smirl" <jonsmirl@gmail.com> > + * > + * The standard boot ROM sequence for an x86 machine uses the BIOS > + * to select an initial video card for boot display. This boot video > + * card will have it's BIOS copied to C0000 in system RAM. > + * IORESOURCE_ROM_SHADOW is used to associate the boot video > + * card with this copy. On laptops this copy has to be used since > + * the main ROM may be compressed or combined with another image. > + * See pci_map_rom() for use of this flag. Before marking the device > + * with IORESOURCE_ROM_SHADOW check if a vga_default_device is already set > + * by either arch cde or vga-arbitration, if so only apply the fixup to this > + * already determined primary video card. > + */ > + > +void pci_fixup_video(struct pci_dev *pdev) > +{ > + struct pci_dev *bridge; > + struct pci_bus *bus; > + u16 config; > + > + if (!vga_default_device()) { > + resource_size_t start, end; > + int i; > + > + for (i=0; i < DEVICE_COUNT_RESOURCE; i++) { > + if (!(pci_resource_flags(pdev, i) & IORESOURCE_MEM)) > + continue; > + > + start = pci_resource_start(pdev, i); > + end = pci_resource_end(pdev, i); > + > + if (!start || !end) > + continue; > + > + if (screen_info.lfb_base >= start && > + (screen_info.lfb_base + screen_info.lfb_size) < end) > + vga_set_default_device(pdev); > + } > + } > + > + /* Is VGA routed to us? */ > + bus = pdev->bus; > + while (bus) { > + bridge = bus->self; > + > + /* > + * From information provided by > + * "David Miller" <davem@davemloft.net> > + * The bridge control register is valid for PCI header > + * type BRIDGE, or CARDBUS. Host to PCI controllers use > + * PCI header type NORMAL. > + */ > + if (bridge > + && ((bridge->hdr_type == PCI_HEADER_TYPE_BRIDGE) > + || (bridge->hdr_type == PCI_HEADER_TYPE_CARDBUS))) { I have a patch in my pci/pci_is_bridge branch that will conflict with this, but I'll take care of sorting that out. You can continue to base your patch on v3.15-rc1 or whatever you're using. > + pci_read_config_word(bridge, PCI_BRIDGE_CONTROL, > + &config); > + if (!(config & PCI_BRIDGE_CTL_VGA)) > + return; > + } > + bus = bus->parent; > + } > + if (!vga_default_device() || pdev == vga_default_device()) { > + pci_read_config_word(pdev, PCI_COMMAND, &config); > + if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) { > + pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW; > + dev_printk(KERN_DEBUG, &pdev->dev, "Boot video device\n"); > + vga_set_default_device(pdev); > + } > + } > +} > + > static inline void vga_irq_set_state(struct vga_device *vgadev, bool state) > { > if (vgadev->irq_set_state) > diff --git a/drivers/video/fbdev/efifb.c b/drivers/video/fbdev/efifb.c > index ae9618f..a033180 100644 > --- a/drivers/video/fbdev/efifb.c > +++ b/drivers/video/fbdev/efifb.c > @@ -19,8 +19,6 @@ > > static bool request_mem_succeeded = false; > > -static struct pci_dev *default_vga; > - > static struct fb_var_screeninfo efifb_defined = { > .activate = FB_ACTIVATE_NOW, > .height = -1, > @@ -84,18 +82,6 @@ static struct fb_ops efifb_ops = { > .fb_imageblit = cfb_imageblit, > }; > > -struct pci_dev *vga_default_device(void) > -{ > - return default_vga; > -} > - > -EXPORT_SYMBOL_GPL(vga_default_device); > - > -void vga_set_default_device(struct pci_dev *pdev) > -{ > - default_vga = pdev; > -} > - > static int efifb_setup(char *options) > { > char *this_opt; > @@ -126,30 +112,6 @@ static int efifb_setup(char *options) > } > } > > - for_each_pci_dev(dev) { > - int i; > - > - if ((dev->class >> 8) != PCI_CLASS_DISPLAY_VGA) > - continue; > - > - for (i=0; i < DEVICE_COUNT_RESOURCE; i++) { > - resource_size_t start, end; > - > - if (!(pci_resource_flags(dev, i) & IORESOURCE_MEM)) > - continue; > - > - start = pci_resource_start(dev, i); > - end = pci_resource_end(dev, i); > - > - if (!start || !end) > - continue; > - > - if (screen_info.lfb_base >= start && > - (screen_info.lfb_base + screen_info.lfb_size) < end) > - default_vga = dev; > - } > - } > - > return 0; > } > > diff --git a/include/linux/vgaarb.h b/include/linux/vgaarb.h > index 2c02f3a..6518460 100644 > --- a/include/linux/vgaarb.h > +++ b/include/linux/vgaarb.h > @@ -162,6 +162,43 @@ extern void vga_put(struct pci_dev *pdev, unsigned int rsrc); > #define vga_put(pdev, rsrc) > #endif > > +/** > + * pci_fixup_video > + * > + * This can be called by arch PCI to fixup boot VGA tagging > + * of VGA PCI devices (e.g. for X86, IA64) > + * > + * This code was initially spread/duplicated across: > + * - X86 PCI-fixup > + * - IA64 PCI-fixup > + * - EFI_FB > + * > + * * PCI-fixup part: > + * Fixup to mark boot BIOS video selected by BIOS before it changes > + * > + * From information provided by "Jon Smirl" <jonsmirl@gmail.com> > + * > + * The standard boot ROM sequence for an x86 machine uses the BIOS > + * to select an initial video card for boot display. This boot video > + * card will have it's BIOS copied to C0000 in system RAM. > + * IORESOURCE_ROM_SHADOW is used to associate the boot video > + * card with this copy. On laptops this copy has to be used since > + * the main ROM may be compressed or combined with another image. > + * See pci_map_rom() for use of this flag. IORESOURCE_ROM_SHADOW > + * is marked here since the boot video device will be the only enabled > + * video device at this point. > + * > + * * EFI_FB part: > + * Some EFI-based system (e.g. Intel-Macs from Apple) do not setup > + * shadow Video-BIOS and thus can only be detected by framebuffer > + * IO memory range. Flag the corresponding GPU as boot_vga. > + */ I would fold this information into the comment at the function definition. It looks like pci_fixup_video() is only called as a quirk, so there aren't going to be random callers that will look for information at this declaration. > + > +#if defined(CONFIG_VGA_ARB) > +void pci_fixup_video(struct pci_dev *pdev); > +#else > +static inline void pci_fixup_video(struct pci_dev *pdev) { } > +#endif > > /** > * vga_default_device
On Tue, 27 May 2014 Bjorn Helgaas <bhelgaas@google.com> wrote: > On Wed, May 14, 2014 at 10:43:39PM +0200, Bruno Prémont wrote: > > With commit b4aa0163056b6c70029b6e8619ce07c274351f42 Matthew Garret > > I think there's an emerging convention to use reference commits as > <12-char-SHA1> ("subject"), i.e., > > b4aa0163056b ("efifb: Implement vga_default_device() (v2)") > > for this case. Also, s/Garret/Garrett/. Adjusted > > introduced a efifb vga_default_device() so that EFI systems that do not > > load shadow VBIOS or setup VGA get proper value for boot_vga PCI sysfs > > attribute on the corresponding PCI device. > > > > Xorg is refusing to autodetect devices when boot_vga=0 which is the case > > on some EFI system (e.g. MacBookAir2,1). Xorg detects the GPU and finds > > the dri device but then bails out with "no devices detected". > > > > With introduction of sysfb/simplefb/simpledrm efifb is getting obsolete > > while having native drivers for the GPU also makes selecting > > sysfb/efifb optional. > > > > Remove the efifb implementation of vga_default_device() and initialize > > vgaarb's vga_default_device() with the PCI GPU that matches boot > > screen_info in pci_fixup_video() [x86 and ia64 pci_fixup_video merged > > into common function in vgaarb.c]. > > I think it would be good to split this into two patches: > > 1) Merge the x86 and ia64 pci_fixup_video() implementations. This should > have no functional change at all. > > 2) Whatever else you need to actually fix the bug. This will be much > smaller, and the actual bug fix will be easier to see. > > It would also be nice to have a URL for a bugzilla or mailing list report > of the problem, where there might be dmesg and/or Xorg logs. > > This sounds like it might be applicable for the stable kernels. If so, you > probably should order these so the small bug-fix comes first (even though > this may mean applying the same bugfix for x86 and ia64), and the merge > second. That way the fix can be applied to the stable kernels without the > merge. Split up patches come in reply to this mail > > Other architectures with PCI GPU might need a similar fixup. > > > > Note: If CONFIG_VGA_ARB is unset vga_default_device() is only available > > as a stub that returns NULL, making this adjustment insufficient. > > In addition, with the merge of x86/ia64 fixup code, this would > > also result in disabled fixup. > > Unsetting CONFIG_VGA_ARB requires CONFIG_EXPERT=y though. > > I'm not quite sure what this means, or if this is hint that something is > still wrong even with this patch. Do you mean that if CONFIG_VGA_ARB is > unset, something still doesn't work? > > Maybe this will become obvious to me when you split up the patch. This means that if someone unsets CONFIG_VGA_ARB (he need to set CONFIG_EXPERT to do so) the fixup will not happen at all. Without fixup the systems that need to set the IORESOURCE_ROM_SHADOW flag will not have it, and boot_vga pci device attribute will be 0 more often as well. Moving the unified function somewhere else than vgaarb.c would fix the new IORESOURCE_ROM_SHADOW fixup dependency on VGA_ARB, though not prevent the issue I try to fix as vga_default_device() always returns NULL without VGA_ARB. One possible location would be drivers/pci/quirks.c. Bruno > > Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> > > --- > > This is ported to changes in pci/fixup.c that landed in 3.15-rcs. > > > > Is this fine to go in, if so who will take it? > > > > I got no feedback on my last respin (on top of 3.14 a couple of weeks ago, > > which added moving the ia64 pci boot_vga fixup). > > I've been running this revision for a week or so on 3.15-rc kernels here > > (mostly EFI-enabled system, the mentioned MBA as wells as non-Apple systems > > where the patch was not required).
diff --git a/arch/ia64/pci/fixup.c b/arch/ia64/pci/fixup.c index eee069a..5df22f9 100644 --- a/arch/ia64/pci/fixup.c +++ b/arch/ia64/pci/fixup.c @@ -9,64 +9,14 @@ #include <asm/machvec.h> -/* - * Fixup to mark boot BIOS video selected by BIOS before it changes - * - * From information provided by "Jon Smirl" <jonsmirl@gmail.com> - * - * The standard boot ROM sequence for an x86 machine uses the BIOS - * to select an initial video card for boot display. This boot video - * card will have it's BIOS copied to C0000 in system RAM. - * IORESOURCE_ROM_SHADOW is used to associate the boot video - * card with this copy. On laptops this copy has to be used since - * the main ROM may be compressed or combined with another image. - * See pci_map_rom() for use of this flag. Before marking the device - * with IORESOURCE_ROM_SHADOW check if a vga_default_device is already set - * by either arch cde or vga-arbitration, if so only apply the fixup to this - * already determined primary video card. - */ - -static void pci_fixup_video(struct pci_dev *pdev) +static void pci_ia64_fixup_video(struct pci_dev *pdev) { - struct pci_dev *bridge; - struct pci_bus *bus; - u16 config; - if ((strcmp(ia64_platform_name, "dig") != 0) && (strcmp(ia64_platform_name, "hpzx1") != 0)) return; /* Maybe, this machine supports legacy memory map. */ - /* Is VGA routed to us? */ - bus = pdev->bus; - while (bus) { - bridge = bus->self; - - /* - * From information provided by - * "David Miller" <davem@davemloft.net> - * The bridge control register is valid for PCI header - * type BRIDGE, or CARDBUS. Host to PCI controllers use - * PCI header type NORMAL. - */ - if (bridge - &&((bridge->hdr_type == PCI_HEADER_TYPE_BRIDGE) - ||(bridge->hdr_type == PCI_HEADER_TYPE_CARDBUS))) { - pci_read_config_word(bridge, PCI_BRIDGE_CONTROL, - &config); - if (!(config & PCI_BRIDGE_CTL_VGA)) - return; - } - bus = bus->parent; - } - if (!vga_default_device() || pdev == vga_default_device()) { - pci_read_config_word(pdev, PCI_COMMAND, &config); - if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) { - pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW; - dev_printk(KERN_DEBUG, &pdev->dev, "Boot video device\n"); - vga_set_default_device(pdev); - } - } + pci_fixup_video(pdev); } DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID, - PCI_CLASS_DISPLAY_VGA, 8, pci_fixup_video); + PCI_CLASS_DISPLAY_VGA, 8, pci_ia64_fixup_video); diff --git a/arch/x86/include/asm/vga.h b/arch/x86/include/asm/vga.h index 44282fb..c4b9dc2 100644 --- a/arch/x86/include/asm/vga.h +++ b/arch/x86/include/asm/vga.h @@ -17,10 +17,4 @@ #define vga_readb(x) (*(x)) #define vga_writeb(x, y) (*(y) = (x)) -#ifdef CONFIG_FB_EFI -#define __ARCH_HAS_VGA_DEFAULT_DEVICE -extern struct pci_dev *vga_default_device(void); -extern void vga_set_default_device(struct pci_dev *pdev); -#endif - #endif /* _ASM_X86_VGA_H */ diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c index 94ae9ae..b599847 100644 --- a/arch/x86/pci/fixup.c +++ b/arch/x86/pci/fixup.c @@ -302,60 +302,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PB1, pcie_r DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PC, pcie_rootport_aspm_quirk); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PC1, pcie_rootport_aspm_quirk); -/* - * Fixup to mark boot BIOS video selected by BIOS before it changes - * - * From information provided by "Jon Smirl" <jonsmirl@gmail.com> - * - * The standard boot ROM sequence for an x86 machine uses the BIOS - * to select an initial video card for boot display. This boot video - * card will have it's BIOS copied to C0000 in system RAM. - * IORESOURCE_ROM_SHADOW is used to associate the boot video - * card with this copy. On laptops this copy has to be used since - * the main ROM may be compressed or combined with another image. - * See pci_map_rom() for use of this flag. Before marking the device - * with IORESOURCE_ROM_SHADOW check if a vga_default_device is already set - * by either arch cde or vga-arbitration, if so only apply the fixup to this - * already determined primary video card. - */ - -static void pci_fixup_video(struct pci_dev *pdev) -{ - struct pci_dev *bridge; - struct pci_bus *bus; - u16 config; - - /* Is VGA routed to us? */ - bus = pdev->bus; - while (bus) { - bridge = bus->self; - - /* - * From information provided by - * "David Miller" <davem@davemloft.net> - * The bridge control register is valid for PCI header - * type BRIDGE, or CARDBUS. Host to PCI controllers use - * PCI header type NORMAL. - */ - if (bridge - && ((bridge->hdr_type == PCI_HEADER_TYPE_BRIDGE) - || (bridge->hdr_type == PCI_HEADER_TYPE_CARDBUS))) { - pci_read_config_word(bridge, PCI_BRIDGE_CONTROL, - &config); - if (!(config & PCI_BRIDGE_CTL_VGA)) - return; - } - bus = bus->parent; - } - if (!vga_default_device() || pdev == vga_default_device()) { - pci_read_config_word(pdev, PCI_COMMAND, &config); - if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) { - pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW; - dev_printk(KERN_DEBUG, &pdev->dev, "Boot video device\n"); - vga_set_default_device(pdev); - } - } -} +/* pci_fixup_video shared in vgaarb.c */ DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA, 8, pci_fixup_video); diff --git a/drivers/gpu/vga/vgaarb.c b/drivers/gpu/vga/vgaarb.c index af02597..f0fbdf6 100644 --- a/drivers/gpu/vga/vgaarb.c +++ b/drivers/gpu/vga/vgaarb.c @@ -149,6 +149,81 @@ void vga_set_default_device(struct pci_dev *pdev) } #endif +/* + * Fixup to mark boot BIOS video selected by BIOS before it changes + * + * From information provided by "Jon Smirl" <jonsmirl@gmail.com> + * + * The standard boot ROM sequence for an x86 machine uses the BIOS + * to select an initial video card for boot display. This boot video + * card will have it's BIOS copied to C0000 in system RAM. + * IORESOURCE_ROM_SHADOW is used to associate the boot video + * card with this copy. On laptops this copy has to be used since + * the main ROM may be compressed or combined with another image. + * See pci_map_rom() for use of this flag. Before marking the device + * with IORESOURCE_ROM_SHADOW check if a vga_default_device is already set + * by either arch cde or vga-arbitration, if so only apply the fixup to this + * already determined primary video card. + */ + +void pci_fixup_video(struct pci_dev *pdev) +{ + struct pci_dev *bridge; + struct pci_bus *bus; + u16 config; + + if (!vga_default_device()) { + resource_size_t start, end; + int i; + + for (i=0; i < DEVICE_COUNT_RESOURCE; i++) { + if (!(pci_resource_flags(pdev, i) & IORESOURCE_MEM)) + continue; + + start = pci_resource_start(pdev, i); + end = pci_resource_end(pdev, i); + + if (!start || !end) + continue; + + if (screen_info.lfb_base >= start && + (screen_info.lfb_base + screen_info.lfb_size) < end) + vga_set_default_device(pdev); + } + } + + /* Is VGA routed to us? */ + bus = pdev->bus; + while (bus) { + bridge = bus->self; + + /* + * From information provided by + * "David Miller" <davem@davemloft.net> + * The bridge control register is valid for PCI header + * type BRIDGE, or CARDBUS. Host to PCI controllers use + * PCI header type NORMAL. + */ + if (bridge + && ((bridge->hdr_type == PCI_HEADER_TYPE_BRIDGE) + || (bridge->hdr_type == PCI_HEADER_TYPE_CARDBUS))) { + pci_read_config_word(bridge, PCI_BRIDGE_CONTROL, + &config); + if (!(config & PCI_BRIDGE_CTL_VGA)) + return; + } + bus = bus->parent; + } + if (!vga_default_device() || pdev == vga_default_device()) { + pci_read_config_word(pdev, PCI_COMMAND, &config); + if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) { + pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW; + dev_printk(KERN_DEBUG, &pdev->dev, "Boot video device\n"); + vga_set_default_device(pdev); + } + } +} + static inline void vga_irq_set_state(struct vga_device *vgadev, bool state) { if (vgadev->irq_set_state) diff --git a/drivers/video/fbdev/efifb.c b/drivers/video/fbdev/efifb.c index ae9618f..a033180 100644 --- a/drivers/video/fbdev/efifb.c +++ b/drivers/video/fbdev/efifb.c @@ -19,8 +19,6 @@ static bool request_mem_succeeded = false; -static struct pci_dev *default_vga; - static struct fb_var_screeninfo efifb_defined = { .activate = FB_ACTIVATE_NOW, .height = -1, @@ -84,18 +82,6 @@ static struct fb_ops efifb_ops = { .fb_imageblit = cfb_imageblit, }; -struct pci_dev *vga_default_device(void) -{ - return default_vga; -} - -EXPORT_SYMBOL_GPL(vga_default_device); - -void vga_set_default_device(struct pci_dev *pdev) -{ - default_vga = pdev; -} - static int efifb_setup(char *options) { char *this_opt; @@ -126,30 +112,6 @@ static int efifb_setup(char *options) } } - for_each_pci_dev(dev) { - int i; - - if ((dev->class >> 8) != PCI_CLASS_DISPLAY_VGA) - continue; - - for (i=0; i < DEVICE_COUNT_RESOURCE; i++) { - resource_size_t start, end; - - if (!(pci_resource_flags(dev, i) & IORESOURCE_MEM)) - continue; - - start = pci_resource_start(dev, i); - end = pci_resource_end(dev, i); - - if (!start || !end) - continue; - - if (screen_info.lfb_base >= start && - (screen_info.lfb_base + screen_info.lfb_size) < end) - default_vga = dev; - } - } - return 0; } diff --git a/include/linux/vgaarb.h b/include/linux/vgaarb.h index 2c02f3a..6518460 100644 --- a/include/linux/vgaarb.h +++ b/include/linux/vgaarb.h @@ -162,6 +162,43 @@ extern void vga_put(struct pci_dev *pdev, unsigned int rsrc); #define vga_put(pdev, rsrc) #endif +/** + * pci_fixup_video + * + * This can be called by arch PCI to fixup boot VGA tagging + * of VGA PCI devices (e.g. for X86, IA64) + * + * This code was initially spread/duplicated across: + * - X86 PCI-fixup + * - IA64 PCI-fixup + * - EFI_FB + * + * * PCI-fixup part: + * Fixup to mark boot BIOS video selected by BIOS before it changes + * + * From information provided by "Jon Smirl" <jonsmirl@gmail.com> + * + * The standard boot ROM sequence for an x86 machine uses the BIOS + * to select an initial video card for boot display. This boot video + * card will have it's BIOS copied to C0000 in system RAM. + * IORESOURCE_ROM_SHADOW is used to associate the boot video + * card with this copy. On laptops this copy has to be used since + * the main ROM may be compressed or combined with another image. + * See pci_map_rom() for use of this flag. IORESOURCE_ROM_SHADOW + * is marked here since the boot video device will be the only enabled + * video device at this point. + * + * * EFI_FB part: + * Some EFI-based system (e.g. Intel-Macs from Apple) do not setup + * shadow Video-BIOS and thus can only be detected by framebuffer + * IO memory range. Flag the corresponding GPU as boot_vga. + */ + +#if defined(CONFIG_VGA_ARB) +void pci_fixup_video(struct pci_dev *pdev); +#else +static inline void pci_fixup_video(struct pci_dev *pdev) { } +#endif /** * vga_default_device
With commit b4aa0163056b6c70029b6e8619ce07c274351f42 Matthew Garret introduced a efifb vga_default_device() so that EFI systems that do not load shadow VBIOS or setup VGA get proper value for boot_vga PCI sysfs attribute on the corresponding PCI device. Xorg is refusing to autodetect devices when boot_vga=0 which is the case on some EFI system (e.g. MacBookAir2,1). Xorg detects the GPU and finds the dri device but then bails out with "no devices detected". With introduction of sysfb/simplefb/simpledrm efifb is getting obsolete while having native drivers for the GPU also makes selecting sysfb/efifb optional. Remove the efifb implementation of vga_default_device() and initialize vgaarb's vga_default_device() with the PCI GPU that matches boot screen_info in pci_fixup_video() [x86 and ia64 pci_fixup_video merged into common function in vgaarb.c]. Other architectures with PCI GPU might need a similar fixup. Note: If CONFIG_VGA_ARB is unset vga_default_device() is only available as a stub that returns NULL, making this adjustment insufficient. In addition, with the merge of x86/ia64 fixup code, this would also result in disabled fixup. Unsetting CONFIG_VGA_ARB requires CONFIG_EXPERT=y though. Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> --- This is ported to changes in pci/fixup.c that landed in 3.15-rcs. Is this fine to go in, if so who will take it? I got no feedback on my last respin (on top of 3.14 a couple of weeks ago, which added moving the ia64 pci boot_vga fixup). I've been running this revision for a week or so on 3.15-rc kernels here (mostly EFI-enabled system, the mentioned MBA as wells as non-Apple systems where the patch was not required). arch/ia64/pci/fixup.c | 56 ++------------------------------- arch/x86/include/asm/vga.h | 6 ---- arch/x86/pci/fixup.c | 55 +-------------------------------- drivers/gpu/vga/vgaarb.c | 75 +++++++++++++++++++++++++++++++++++++++++++++ drivers/video/fbdev/efifb.c | 38 ----------------------- include/linux/vgaarb.h | 37 ++++++++++++++++++++++ 6 files changed, 116 insertions(+), 151 deletions(-)