| Message ID | 20160901153204.11217-7-maxime.ripard@free-electrons.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi, On Thu, Sep 1, 2016 at 11:32 PM, Maxime Ripard <maxime.ripard@free-electrons.com> wrote: > The LCD output needs to be muxed. Add the proper pinctrl node. > > Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> > --- > arch/arm/boot/dts/sun8i-a33.dtsi | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi > index 5f9dbd17eb50..d5f93c05846f 100644 > --- a/arch/arm/boot/dts/sun8i-a33.dtsi > +++ b/arch/arm/boot/dts/sun8i-a33.dtsi > @@ -300,6 +300,16 @@ > interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, > <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; > > + tcon0_rgb666_pins_a: tcon0_rgb666@0 { This is the only possible combination. You can drop the _a and @0. Also this can be shared with A23, as they are pin compatible, and I also matched the datasheets. Otherwise Acked-by: Chen-Yu Tsai <wens@csie.org> > + allwinner,pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", > + "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", > + "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", > + "PD24", "PD25", "PD26", "PD27"; > + allwinner,function = "lcd0"; > + allwinner,drive = <SUN4I_PINCTRL_10_MA>; > + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; > + }; > + > uart0_pins_b: uart0@1 { > allwinner,pins = "PB0", "PB1"; > allwinner,function = "uart0"; > -- > 2.9.2 > > -- > You received this message because you are subscribed to the Google Groups "linux-sunxi" group. > To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@googlegroups.com. > For more options, visit https://groups.google.com/d/optout.
diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi index 5f9dbd17eb50..d5f93c05846f 100644 --- a/arch/arm/boot/dts/sun8i-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a33.dtsi @@ -300,6 +300,16 @@ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + tcon0_rgb666_pins_a: tcon0_rgb666@0 { + allwinner,pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", + "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", + "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", + "PD24", "PD25", "PD26", "PD27"; + allwinner,function = "lcd0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + uart0_pins_b: uart0@1 { allwinner,pins = "PB0", "PB1"; allwinner,function = "uart0";
The LCD output needs to be muxed. Add the proper pinctrl node. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> --- arch/arm/boot/dts/sun8i-a33.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+)