Message ID | 20160926090437.22676-1-daniel.vetter@ffwll.ch (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Sorry for missing this. Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> On 26/09/16 10:04, Daniel Vetter wrote: > Brought up in a discussion for enabling gamma on fsl-dcu. > > Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> > Cc: Meng Yi <meng.yi@nxp.com> > Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> > Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> > --- > drivers/gpu/drm/drm_color_mgmt.c | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > > diff --git a/drivers/gpu/drm/drm_color_mgmt.c b/drivers/gpu/drm/drm_color_mgmt.c > index d28ffdd2b929..6543ebde501a 100644 > --- a/drivers/gpu/drm/drm_color_mgmt.c > +++ b/drivers/gpu/drm/drm_color_mgmt.c > @@ -41,6 +41,10 @@ > * nor use all the elements of the LUT (for example the hardware might > * choose to interpolate between LUT[0] and LUT[4]). > * > + * Setting this to NULL (blob property value set to 0) means a > + * linear/pass-thru gamma table should be used. This is generally the > + * driver boot-up state too. > + * > * “DEGAMMA_LUT_SIZE”: > * Unsinged range property to give the size of the lookup table to be set > * on the DEGAMMA_LUT property (the size depends on the underlying > @@ -54,6 +58,10 @@ > * lookup through the gamma LUT. The data is interpreted as a struct > * &drm_color_ctm. > * > + * Setting this to NULL (blob property value set to 0) means a > + * unit/pass-thru matrix should be used. This is generally the driver > + * boot-up state too. > + * > * “GAMMA_LUT”: > * Blob property to set the gamma lookup table (LUT) mapping pixel data > * after the transformation matrix to data sent to the connector. The > @@ -62,6 +70,10 @@ > * nor use all the elements of the LUT (for example the hardware might > * choose to interpolate between LUT[0] and LUT[4]). > * > + * Setting this to NULL (blob property value set to 0) means a > + * linear/pass-thru gamma table should be used. This is generally the > + * driver boot-up state too. > + * > * “GAMMA_LUT_SIZE”: > * Unsigned range property to give the size of the lookup table to be set > * on the GAMMA_LUT property (the size depends on the underlying hardware).
On Tue, Nov 15, 2016 at 03:39:01PM +0000, Lionel Landwerlin wrote: > Sorry for missing this. > > Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> np and thanks a lot for reviewing. -Daniel > > On 26/09/16 10:04, Daniel Vetter wrote: > > Brought up in a discussion for enabling gamma on fsl-dcu. > > > > Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> > > Cc: Meng Yi <meng.yi@nxp.com> > > Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> > > Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> > > --- > > drivers/gpu/drm/drm_color_mgmt.c | 12 ++++++++++++ > > 1 file changed, 12 insertions(+) > > > > diff --git a/drivers/gpu/drm/drm_color_mgmt.c b/drivers/gpu/drm/drm_color_mgmt.c > > index d28ffdd2b929..6543ebde501a 100644 > > --- a/drivers/gpu/drm/drm_color_mgmt.c > > +++ b/drivers/gpu/drm/drm_color_mgmt.c > > @@ -41,6 +41,10 @@ > > * nor use all the elements of the LUT (for example the hardware might > > * choose to interpolate between LUT[0] and LUT[4]). > > * > > + * Setting this to NULL (blob property value set to 0) means a > > + * linear/pass-thru gamma table should be used. This is generally the > > + * driver boot-up state too. > > + * > > * “DEGAMMA_LUT_SIZE”: > > * Unsinged range property to give the size of the lookup table to be set > > * on the DEGAMMA_LUT property (the size depends on the underlying > > @@ -54,6 +58,10 @@ > > * lookup through the gamma LUT. The data is interpreted as a struct > > * &drm_color_ctm. > > * > > + * Setting this to NULL (blob property value set to 0) means a > > + * unit/pass-thru matrix should be used. This is generally the driver > > + * boot-up state too. > > + * > > * “GAMMA_LUT”: > > * Blob property to set the gamma lookup table (LUT) mapping pixel data > > * after the transformation matrix to data sent to the connector. The > > @@ -62,6 +70,10 @@ > > * nor use all the elements of the LUT (for example the hardware might > > * choose to interpolate between LUT[0] and LUT[4]). > > * > > + * Setting this to NULL (blob property value set to 0) means a > > + * linear/pass-thru gamma table should be used. This is generally the > > + * driver boot-up state too. > > + * > > * “GAMMA_LUT_SIZE”: > > * Unsigned range property to give the size of the lookup table to be set > > * on the GAMMA_LUT property (the size depends on the underlying hardware). > >
diff --git a/drivers/gpu/drm/drm_color_mgmt.c b/drivers/gpu/drm/drm_color_mgmt.c index d28ffdd2b929..6543ebde501a 100644 --- a/drivers/gpu/drm/drm_color_mgmt.c +++ b/drivers/gpu/drm/drm_color_mgmt.c @@ -41,6 +41,10 @@ * nor use all the elements of the LUT (for example the hardware might * choose to interpolate between LUT[0] and LUT[4]). * + * Setting this to NULL (blob property value set to 0) means a + * linear/pass-thru gamma table should be used. This is generally the + * driver boot-up state too. + * * “DEGAMMA_LUT_SIZE”: * Unsinged range property to give the size of the lookup table to be set * on the DEGAMMA_LUT property (the size depends on the underlying @@ -54,6 +58,10 @@ * lookup through the gamma LUT. The data is interpreted as a struct * &drm_color_ctm. * + * Setting this to NULL (blob property value set to 0) means a + * unit/pass-thru matrix should be used. This is generally the driver + * boot-up state too. + * * “GAMMA_LUT”: * Blob property to set the gamma lookup table (LUT) mapping pixel data * after the transformation matrix to data sent to the connector. The @@ -62,6 +70,10 @@ * nor use all the elements of the LUT (for example the hardware might * choose to interpolate between LUT[0] and LUT[4]). * + * Setting this to NULL (blob property value set to 0) means a + * linear/pass-thru gamma table should be used. This is generally the + * driver boot-up state too. + * * “GAMMA_LUT_SIZE”: * Unsigned range property to give the size of the lookup table to be set * on the GAMMA_LUT property (the size depends on the underlying hardware).
Brought up in a discussion for enabling gamma on fsl-dcu. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Meng Yi <meng.yi@nxp.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> --- drivers/gpu/drm/drm_color_mgmt.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)