@@ -194,6 +194,11 @@ When a transmit finished (successfully or otherwise):
void cec_transmit_done(struct cec_adapter *adap, u8 status, u8 arb_lost_cnt,
u8 nack_cnt, u8 low_drive_cnt, u8 error_cnt);
+or:
+
+.. c:function::
+ void cec_transmit_attempt_done(struct cec_adapter *adap, u8 status);
+
The status can be one of:
CEC_TX_STATUS_OK:
@@ -231,6 +236,11 @@ to 1, if the hardware does support retry then either set these counters to
0 if the hardware provides no feedback of which errors occurred and how many
times, or fill in the correct values as reported by the hardware.
+The cec_transmit_attempt_done() function is a helper for cases where the
+hardware never retries, so the transmit is always for just a single
+attempt. It will call cec_transmit_done() in turn, filling in 1 for the
+count argument corresponding to the status. Or all 0 if the status was OK.
+
When a CEC message was received:
.. c:function::
@@ -553,6 +553,32 @@ void cec_transmit_done(struct cec_adapter *adap, u8 status, u8 arb_lost_cnt,
}
EXPORT_SYMBOL_GPL(cec_transmit_done);
+void cec_transmit_attempt_done(struct cec_adapter *adap, u8 status)
+{
+ switch (status) {
+ case CEC_TX_STATUS_OK:
+ cec_transmit_done(adap, status, 0, 0, 0, 0);
+ return;
+ case CEC_TX_STATUS_ARB_LOST:
+ cec_transmit_done(adap, status, 1, 0, 0, 0);
+ return;
+ case CEC_TX_STATUS_NACK:
+ cec_transmit_done(adap, status, 0, 1, 0, 0);
+ return;
+ case CEC_TX_STATUS_LOW_DRIVE:
+ cec_transmit_done(adap, status, 0, 0, 1, 0);
+ return;
+ case CEC_TX_STATUS_ERROR:
+ cec_transmit_done(adap, status, 0, 0, 0, 1);
+ return;
+ default:
+ /* Should never happen */
+ WARN(1, "cec-%s: invalid status 0x%02x\n", adap->name, status);
+ return;
+ }
+}
+EXPORT_SYMBOL_GPL(cec_transmit_attempt_done);
+
/*
* Called when waiting for a reply times out.
*/
@@ -227,6 +227,12 @@ int cec_transmit_msg(struct cec_adapter *adap, struct cec_msg *msg,
/* Called by the adapter */
void cec_transmit_done(struct cec_adapter *adap, u8 status, u8 arb_lost_cnt,
u8 nack_cnt, u8 low_drive_cnt, u8 error_cnt);
+/*
+ * Simplified version of cec_transmit_done for hardware that doesn't retry
+ * failed transmits. So this is always just one attempt in which case
+ * the status is sufficient.
+ */
+void cec_transmit_attempt_done(struct cec_adapter *adap, u8 status);
void cec_received_msg(struct cec_adapter *adap, struct cec_msg *msg);
/**
A simpler variant of cec_transmit_done to be used where the HW does just a single attempt at a transmit. So if the status indicates an error, then the corresponding error count will always be 1 and this function figures that out based on the status argument. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> --- Documentation/media/kapi/cec-core.rst | 10 ++++++++++ drivers/media/cec/cec-adap.c | 26 ++++++++++++++++++++++++++ include/media/cec.h | 6 ++++++ 3 files changed, 42 insertions(+)