| Message ID | 20170609175401.40204-3-hverkuil@xs4all.nl (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
2017-06-09 19:54 GMT+02:00 Hans Verkuil <hverkuil@xs4all.nl>: > From: Hans Verkuil <hans.verkuil@cisco.com> > > Now that there is a cec.txt with common CEC bindings, update the two > driver-specific bindings to refer to cec.txt. > > Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> > Cc: Krzysztof Kozlowski <krzk@kernel.org> > Cc: Andrzej Hajda <a.hajda@samsung.com> > Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> > Cc: devicetree@vger.kernel.org > --- > Documentation/devicetree/bindings/media/s5p-cec.txt | 6 ++---- > Documentation/devicetree/bindings/media/stih-cec.txt | 2 +- > 2 files changed, 3 insertions(+), 5 deletions(-) > > diff --git a/Documentation/devicetree/bindings/media/s5p-cec.txt b/Documentation/devicetree/bindings/media/s5p-cec.txt > index 261af4d1a791..1b1a10ba48ce 100644 > --- a/Documentation/devicetree/bindings/media/s5p-cec.txt > +++ b/Documentation/devicetree/bindings/media/s5p-cec.txt > @@ -15,13 +15,11 @@ Required properties: > - clock-names : from common clock binding: must contain "hdmicec", > corresponding to entry in the clocks property. > - samsung,syscon-phandle - phandle to the PMU system controller > - - hdmi-phandle - phandle to the HDMI controller > + - hdmi-phandle - phandle to the HDMI controller, see also cec.txt. > > Optional: > - needs-hpd : if present the CEC support is only available when the HPD > - is high. Some boards only let the CEC pin through if the HPD is high, for > - example if there is a level converter that uses the HPD to power up > - or down. > + is high. See cec.txt for more details. > > Example: > > diff --git a/Documentation/devicetree/bindings/media/stih-cec.txt b/Documentation/devicetree/bindings/media/stih-cec.txt > index 289a08b33651..8be2a040c6c6 100644 > --- a/Documentation/devicetree/bindings/media/stih-cec.txt > +++ b/Documentation/devicetree/bindings/media/stih-cec.txt > @@ -9,7 +9,7 @@ Required properties: > - pinctrl-names: Contains only one value - "default" > - pinctrl-0: Specifies the pin control groups used for CEC hardware. > - resets: Reference to a reset controller > - - hdmi-phandle: Phandle to the HDMI controller > + - hdmi-phandle: Phandle to the HDMI controller, see also cec.txt. > > Example for STIH407: > > -- > 2.11.0 > Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
On 06/12/2017 02:51 PM, Benjamin Gaignard wrote: > 2017-06-09 19:54 GMT+02:00 Hans Verkuil <hverkuil@xs4all.nl>: > From: Hans Verkuil <hans.verkuil@cisco.com> > > Now that there is a cec.txt with common CEC bindings, update the two > driver-specific bindings to refer to cec.txt. > > Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
On Fri, Jun 9, 2017 at 12:54 PM, Hans Verkuil <hverkuil@xs4all.nl> wrote: > From: Hans Verkuil <hans.verkuil@cisco.com> > > Now that there is a cec.txt with common CEC bindings, update the two > driver-specific bindings to refer to cec.txt. > > Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> > Cc: Krzysztof Kozlowski <krzk@kernel.org> > Cc: Andrzej Hajda <a.hajda@samsung.com> > Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> > Cc: devicetree@vger.kernel.org > --- > Documentation/devicetree/bindings/media/s5p-cec.txt | 6 ++---- > Documentation/devicetree/bindings/media/stih-cec.txt | 2 +- > 2 files changed, 3 insertions(+), 5 deletions(-) Reviewed-by: Rob Herring <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/media/s5p-cec.txt b/Documentation/devicetree/bindings/media/s5p-cec.txt index 261af4d1a791..1b1a10ba48ce 100644 --- a/Documentation/devicetree/bindings/media/s5p-cec.txt +++ b/Documentation/devicetree/bindings/media/s5p-cec.txt @@ -15,13 +15,11 @@ Required properties: - clock-names : from common clock binding: must contain "hdmicec", corresponding to entry in the clocks property. - samsung,syscon-phandle - phandle to the PMU system controller - - hdmi-phandle - phandle to the HDMI controller + - hdmi-phandle - phandle to the HDMI controller, see also cec.txt. Optional: - needs-hpd : if present the CEC support is only available when the HPD - is high. Some boards only let the CEC pin through if the HPD is high, for - example if there is a level converter that uses the HPD to power up - or down. + is high. See cec.txt for more details. Example: diff --git a/Documentation/devicetree/bindings/media/stih-cec.txt b/Documentation/devicetree/bindings/media/stih-cec.txt index 289a08b33651..8be2a040c6c6 100644 --- a/Documentation/devicetree/bindings/media/stih-cec.txt +++ b/Documentation/devicetree/bindings/media/stih-cec.txt @@ -9,7 +9,7 @@ Required properties: - pinctrl-names: Contains only one value - "default" - pinctrl-0: Specifies the pin control groups used for CEC hardware. - resets: Reference to a reset controller - - hdmi-phandle: Phandle to the HDMI controller + - hdmi-phandle: Phandle to the HDMI controller, see also cec.txt. Example for STIH407: