@@ -8,6 +8,9 @@ config CEC_CORE
config CEC_NOTIFIER
bool
+config CEC_PIN
+ bool
+
menuconfig MEDIA_SUPPORT
tristate "Multimedia support"
depends on HAS_IOMEM
@@ -4,4 +4,8 @@ ifeq ($(CONFIG_CEC_NOTIFIER),y)
cec-objs += cec-notifier.o
endif
+ifeq ($(CONFIG_CEC_PIN),y)
+ cec-objs += cec-pin.o
+endif
+
obj-$(CONFIG_CEC_CORE) += cec.o
@@ -30,6 +30,7 @@
#include <linux/uaccess.h>
#include <linux/version.h>
+#include <media/cec-pin.h>
#include "cec-priv.h"
static inline struct cec_devnode *cec_devnode_data(struct file *filp)
@@ -430,6 +431,15 @@ static long cec_s_mode(struct cec_adapter *adap, struct cec_fh *fh,
if (mode_follower == CEC_MODE_FOLLOWER)
adap->follower_cnt++;
if (mode_follower == CEC_MODE_MONITOR_PIN) {
+#ifdef CONFIG_CEC_PIN
+ struct cec_event ev = {
+ .flags = CEC_EVENT_FL_INITIAL_STATE,
+ };
+
+ ev.event = adap->pin->cur_value ? CEC_EVENT_PIN_HIGH :
+ CEC_EVENT_PIN_LOW;
+ cec_queue_event_fh(fh, &ev, 0);
+#endif
adap->monitor_pin_cnt++;
}
if (mode_follower == CEC_MODE_EXCL_FOLLOWER ||
new file mode 100644
@@ -0,0 +1,794 @@
+/*
+ * Copyright 2017 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/sched/types.h>
+
+#include <media/cec-pin.h>
+
+/* All timings are in microseconds */
+
+/* start bit timings */
+#define CEC_TIM_START_BIT_LOW 3700
+#define CEC_TIM_START_BIT_LOW_MIN 3500
+#define CEC_TIM_START_BIT_LOW_MAX 3900
+#define CEC_TIM_START_BIT_TOTAL 4500
+#define CEC_TIM_START_BIT_TOTAL_MIN 4300
+#define CEC_TIM_START_BIT_TOTAL_MAX 4700
+
+/* data bit timings */
+#define CEC_TIM_DATA_BIT_0_LOW 1500
+#define CEC_TIM_DATA_BIT_0_LOW_MIN 1300
+#define CEC_TIM_DATA_BIT_0_LOW_MAX 1700
+#define CEC_TIM_DATA_BIT_1_LOW 600
+#define CEC_TIM_DATA_BIT_1_LOW_MIN 400
+#define CEC_TIM_DATA_BIT_1_LOW_MAX 800
+#define CEC_TIM_DATA_BIT_TOTAL 2400
+#define CEC_TIM_DATA_BIT_TOTAL_MIN 2050
+#define CEC_TIM_DATA_BIT_TOTAL_MAX 2750
+/* earliest safe time to sample the bit state */
+#define CEC_TIM_DATA_BIT_SAMPLE 850
+/* earliest time the bit is back to 1 (T7 + 50) */
+#define CEC_TIM_DATA_BIT_HIGH 1750
+
+/* when idle, sample once per millisecond */
+#define CEC_TIM_IDLE_SAMPLE 1000
+/* when processing the start bit, sample twice per millisecond */
+#define CEC_TIM_START_BIT_SAMPLE 500
+/* when polling for a state change, sample once every 50 micoseconds */
+#define CEC_TIM_SAMPLE 50
+
+#define CEC_TIM_LOW_DRIVE_ERROR (1.5 * CEC_TIM_DATA_BIT_TOTAL)
+
+struct cec_state {
+ const char * const name;
+ unsigned int usecs;
+};
+
+static const struct cec_state states[CEC_PIN_STATES] = {
+ { "Off", 0 },
+ { "Idle", CEC_TIM_IDLE_SAMPLE },
+ { "Tx Wait", CEC_TIM_SAMPLE },
+ { "Tx Wait for High", CEC_TIM_IDLE_SAMPLE },
+ { "Tx Start Bit Low", CEC_TIM_START_BIT_LOW },
+ { "Tx Start Bit High", CEC_TIM_START_BIT_TOTAL - CEC_TIM_START_BIT_LOW },
+ { "Tx Data 0 Low", CEC_TIM_DATA_BIT_0_LOW },
+ { "Tx Data 0 High", CEC_TIM_DATA_BIT_TOTAL - CEC_TIM_DATA_BIT_0_LOW },
+ { "Tx Data 1 Low", CEC_TIM_DATA_BIT_1_LOW },
+ { "Tx Data 1 High", CEC_TIM_DATA_BIT_TOTAL - CEC_TIM_DATA_BIT_1_LOW },
+ { "Tx Data 1 Pre Sample", CEC_TIM_DATA_BIT_SAMPLE - CEC_TIM_DATA_BIT_1_LOW },
+ { "Tx Data 1 Post Sample", CEC_TIM_DATA_BIT_TOTAL - CEC_TIM_DATA_BIT_SAMPLE },
+ { "Rx Start Bit Low", CEC_TIM_SAMPLE },
+ { "Rx Start Bit High", CEC_TIM_SAMPLE },
+ { "Rx Data Sample", CEC_TIM_DATA_BIT_SAMPLE },
+ { "Rx Data Post Sample", CEC_TIM_DATA_BIT_HIGH - CEC_TIM_DATA_BIT_SAMPLE },
+ { "Rx Data High", CEC_TIM_SAMPLE },
+ { "Rx Ack Low", CEC_TIM_DATA_BIT_0_LOW },
+ { "Rx Ack Low Post", CEC_TIM_DATA_BIT_HIGH - CEC_TIM_DATA_BIT_0_LOW },
+ { "Rx Ack High Post", CEC_TIM_DATA_BIT_HIGH },
+ { "Rx Ack Finish", CEC_TIM_DATA_BIT_TOTAL_MIN - CEC_TIM_DATA_BIT_HIGH },
+ { "Rx Low Drive", CEC_TIM_LOW_DRIVE_ERROR },
+ { "Rx Irq", 0 },
+};
+
+static void cec_pin_update(struct cec_pin *pin, bool v, bool force)
+{
+ if (!force && v == pin->cur_value)
+ return;
+
+ pin->cur_value = v;
+ if (atomic_read(&pin->work_pin_events) < CEC_NUM_PIN_EVENTS) {
+ pin->work_pin_is_high[pin->work_pin_events_wr] = v;
+ pin->work_pin_ts[pin->work_pin_events_wr] = ktime_get();
+ pin->work_pin_events_wr =
+ (pin->work_pin_events_wr + 1) % CEC_NUM_PIN_EVENTS;
+ atomic_inc(&pin->work_pin_events);
+ }
+ wake_up_interruptible(&pin->kthread_waitq);
+}
+
+static bool cec_pin_read(struct cec_pin *pin)
+{
+ bool v = pin->ops->read(pin->adap);
+
+ cec_pin_update(pin, v, false);
+ return v;
+}
+
+static void cec_pin_low(struct cec_pin *pin)
+{
+ pin->ops->low(pin->adap);
+ cec_pin_update(pin, false, false);
+}
+
+static bool cec_pin_high(struct cec_pin *pin)
+{
+ pin->ops->high(pin->adap);
+ return cec_pin_read(pin);
+}
+
+static void cec_pin_to_idle(struct cec_pin *pin)
+{
+ /*
+ * Reset all status fields, release the bus and
+ * go to idle state.
+ */
+ pin->rx_bit = pin->tx_bit = 0;
+ pin->rx_msg.len = 0;
+ memset(pin->rx_msg.msg, 0, sizeof(pin->rx_msg.msg));
+ pin->state = CEC_ST_IDLE;
+ pin->ts = 0;
+}
+
+/*
+ * Handle Transmit-related states
+ *
+ * Basic state changes when transmitting:
+ *
+ * Idle -> Tx Wait (waiting for the end of signal free time) ->
+ * Tx Start Bit Low -> Tx Start Bit High ->
+ *
+ * Regular data bits + EOM:
+ * Tx Data 0 Low -> Tx Data 0 High ->
+ * or:
+ * Tx Data 1 Low -> Tx Data 1 High ->
+ *
+ * First 4 data bits or Ack bit:
+ * Tx Data 0 Low -> Tx Data 0 High ->
+ * or:
+ * Tx Data 1 Low -> Tx Data 1 High -> Tx Data 1 Pre Sample ->
+ * Tx Data 1 Post Sample ->
+ *
+ * After the last Ack go to Idle.
+ *
+ * If it detects a Low Drive condition then:
+ * Tx Wait For High -> Idle
+ *
+ * If it loses arbitration, then it switches to state Rx Data Post Sample.
+ */
+static void cec_pin_tx_states(struct cec_pin *pin, ktime_t ts)
+{
+ bool v;
+ bool is_ack_bit, ack;
+
+ switch (pin->state) {
+ case CEC_ST_TX_WAIT_FOR_HIGH:
+ if (cec_pin_read(pin))
+ cec_pin_to_idle(pin);
+ break;
+
+ case CEC_ST_TX_START_BIT_LOW:
+ pin->state = CEC_ST_TX_START_BIT_HIGH;
+ /* Generate start bit */
+ cec_pin_high(pin);
+ break;
+
+ case CEC_ST_TX_DATA_BIT_1_HIGH_POST_SAMPLE:
+ /* If the read value is 1, then all is OK */
+ if (!cec_pin_read(pin)) {
+ /*
+ * It's 0, so someone detected an error and pulled the
+ * line low for 1.5 times the nominal bit period.
+ */
+ pin->tx_msg.len = 0;
+ pin->work_tx_ts = ts;
+ pin->work_tx_status = CEC_TX_STATUS_LOW_DRIVE;
+ pin->state = CEC_ST_TX_WAIT_FOR_HIGH;
+ wake_up_interruptible(&pin->kthread_waitq);
+ break;
+ }
+ if (pin->tx_nacked) {
+ cec_pin_to_idle(pin);
+ pin->tx_msg.len = 0;
+ pin->work_tx_ts = ts;
+ pin->work_tx_status = CEC_TX_STATUS_NACK;
+ wake_up_interruptible(&pin->kthread_waitq);
+ break;
+ }
+ /* fall through */
+ case CEC_ST_TX_DATA_BIT_0_HIGH:
+ case CEC_ST_TX_DATA_BIT_1_HIGH:
+ pin->tx_bit++;
+ /* fall through */
+ case CEC_ST_TX_START_BIT_HIGH:
+ if (pin->tx_bit / 10 >= pin->tx_msg.len) {
+ cec_pin_to_idle(pin);
+ pin->tx_msg.len = 0;
+ pin->work_tx_ts = ts;
+ pin->work_tx_status = CEC_TX_STATUS_OK;
+ wake_up_interruptible(&pin->kthread_waitq);
+ break;
+ }
+
+ switch (pin->tx_bit % 10) {
+ default:
+ v = pin->tx_msg.msg[pin->tx_bit / 10] &
+ (1 << (7 - (pin->tx_bit % 10)));
+ pin->state = v ? CEC_ST_TX_DATA_BIT_1_LOW :
+ CEC_ST_TX_DATA_BIT_0_LOW;
+ break;
+ case 8:
+ v = pin->tx_bit / 10 == pin->tx_msg.len - 1;
+ pin->state = v ? CEC_ST_TX_DATA_BIT_1_LOW :
+ CEC_ST_TX_DATA_BIT_0_LOW;
+ break;
+ case 9:
+ pin->state = CEC_ST_TX_DATA_BIT_1_LOW;
+ break;
+ }
+ cec_pin_low(pin);
+ break;
+
+ case CEC_ST_TX_DATA_BIT_0_LOW:
+ case CEC_ST_TX_DATA_BIT_1_LOW:
+ v = pin->state == CEC_ST_TX_DATA_BIT_1_LOW;
+ pin->state = v ? CEC_ST_TX_DATA_BIT_1_HIGH :
+ CEC_ST_TX_DATA_BIT_0_HIGH;
+ is_ack_bit = pin->tx_bit % 10 == 9;
+ if (v && (pin->tx_bit < 4 || is_ack_bit))
+ pin->state = CEC_ST_TX_DATA_BIT_1_HIGH_PRE_SAMPLE;
+ cec_pin_high(pin);
+ break;
+
+ case CEC_ST_TX_DATA_BIT_1_HIGH_PRE_SAMPLE:
+ /* Read the CEC value at the sample time */
+ v = cec_pin_read(pin);
+ is_ack_bit = pin->tx_bit % 10 == 9;
+ /*
+ * If v == 0 and we're within the first 4 bits
+ * of the initiator, then someone else started
+ * transmitting and we lost the arbitration
+ * (i.e. the logical address of the other
+ * transmitter has more leading 0 bits in the
+ * initiator).
+ */
+ if (!v && !is_ack_bit) {
+ pin->tx_msg.len = 0;
+ pin->work_tx_ts = ts;
+ pin->work_tx_status = CEC_TX_STATUS_ARB_LOST;
+ wake_up_interruptible(&pin->kthread_waitq);
+ pin->rx_bit = pin->tx_bit;
+ pin->tx_bit = 0;
+ memset(pin->rx_msg.msg, 0, sizeof(pin->rx_msg.msg));
+ pin->rx_msg.msg[0] = pin->tx_msg.msg[0];
+ pin->rx_msg.msg[0] &= ~(1 << (7 - pin->rx_bit));
+ pin->rx_msg.len = 0;
+ pin->state = CEC_ST_RX_DATA_POST_SAMPLE;
+ pin->rx_bit++;
+ break;
+ }
+ pin->state = CEC_ST_TX_DATA_BIT_1_HIGH_POST_SAMPLE;
+ if (!is_ack_bit)
+ break;
+ /* Was the message ACKed? */
+ ack = cec_msg_is_broadcast(&pin->tx_msg) ? v : !v;
+ if (!ack) {
+ /*
+ * Note: the CEC spec is ambiguous regarding
+ * what action to take when a NACK appears
+ * before the last byte of the payload was
+ * transmitted: either stop transmitting
+ * immediately, or wait until the last byte
+ * was transmitted.
+ *
+ * Most CEC implementations appear to stop
+ * immediately, and that's what we do here
+ * as well.
+ */
+ pin->tx_nacked = true;
+ }
+ break;
+
+ default:
+ break;
+ }
+}
+
+/*
+ * Handle Receive-related states
+ *
+ * Basic state changes when receiving:
+ *
+ * Rx Start Bit Low -> Rx Start Bit High ->
+ * Regular data bits + EOM:
+ * Rx Data Sample -> Rx Data Post Sample -> Rx Data High ->
+ * Ack bit 0:
+ * Rx Ack Low -> Rx Ack Low Post -> Rx Data High ->
+ * Ack bit 1:
+ * Rx Ack High Post -> Rx Data High ->
+ * Ack bit 0 && EOM:
+ * Rx Ack Low -> Rx Ack Low Post -> Rx Ack Finish -> Idle
+ */
+static void cec_pin_rx_states(struct cec_pin *pin, ktime_t ts)
+{
+ s32 delta;
+ bool v;
+ bool ack;
+ bool bcast, for_us;
+ u8 dest;
+
+ switch (pin->state) {
+ /* Receive states */
+ case CEC_ST_RX_START_BIT_LOW:
+ v = cec_pin_read(pin);
+ if (!v)
+ break;
+ pin->state = CEC_ST_RX_START_BIT_HIGH;
+ delta = ktime_us_delta(ts, pin->ts);
+ pin->ts = ts;
+ /* Start bit low is too short, go back to idle */
+ if (delta < CEC_TIM_START_BIT_LOW_MIN -
+ CEC_TIM_IDLE_SAMPLE) {
+ cec_pin_to_idle(pin);
+ }
+ break;
+
+ case CEC_ST_RX_START_BIT_HIGH:
+ v = cec_pin_read(pin);
+ delta = ktime_us_delta(ts, pin->ts);
+ if (v && delta > CEC_TIM_START_BIT_TOTAL_MAX -
+ CEC_TIM_START_BIT_LOW_MIN) {
+ cec_pin_to_idle(pin);
+ break;
+ }
+ if (v)
+ break;
+ pin->state = CEC_ST_RX_DATA_SAMPLE;
+ pin->ts = ts;
+ pin->rx_eom = false;
+ break;
+
+ case CEC_ST_RX_DATA_SAMPLE:
+ v = cec_pin_read(pin);
+ pin->state = CEC_ST_RX_DATA_POST_SAMPLE;
+ switch (pin->rx_bit % 10) {
+ default:
+ if (pin->rx_bit / 10 < CEC_MAX_MSG_SIZE)
+ pin->rx_msg.msg[pin->rx_bit / 10] |=
+ v << (7 - (pin->rx_bit % 10));
+ break;
+ case 8:
+ pin->rx_eom = v;
+ pin->rx_msg.len = pin->rx_bit / 10 + 1;
+ break;
+ case 9:
+ break;
+ }
+ pin->rx_bit++;
+ break;
+
+ case CEC_ST_RX_DATA_POST_SAMPLE:
+ pin->state = CEC_ST_RX_DATA_HIGH;
+ break;
+
+ case CEC_ST_RX_DATA_HIGH:
+ v = cec_pin_read(pin);
+ delta = ktime_us_delta(ts, pin->ts);
+ if (v && delta > CEC_TIM_DATA_BIT_TOTAL_MAX) {
+ cec_pin_to_idle(pin);
+ break;
+ }
+ if (v)
+ break;
+ /*
+ * Go to low drive state when the total bit time is
+ * too short.
+ */
+ if (delta < CEC_TIM_DATA_BIT_TOTAL_MIN) {
+ cec_pin_low(pin);
+ pin->state = CEC_ST_LOW_DRIVE;
+ break;
+ }
+ pin->ts = ts;
+ if (pin->rx_bit % 10 != 9) {
+ pin->state = CEC_ST_RX_DATA_SAMPLE;
+ break;
+ }
+
+ dest = cec_msg_destination(&pin->rx_msg);
+ bcast = dest == CEC_LOG_ADDR_BROADCAST;
+ /* for_us == broadcast or directed to us */
+ for_us = bcast || (pin->la_mask & (1 << dest));
+ /* ACK bit value */
+ ack = bcast ? 1 : !for_us;
+
+ if (ack) {
+ /* No need to write to the bus, just wait */
+ pin->state = CEC_ST_RX_ACK_HIGH_POST;
+ break;
+ }
+ cec_pin_low(pin);
+ pin->state = CEC_ST_RX_ACK_LOW;
+ break;
+
+ case CEC_ST_RX_ACK_LOW:
+ cec_pin_high(pin);
+ pin->state = CEC_ST_RX_ACK_LOW_POST;
+ break;
+
+ case CEC_ST_RX_ACK_LOW_POST:
+ case CEC_ST_RX_ACK_HIGH_POST:
+ v = cec_pin_read(pin);
+ if (v && pin->rx_eom) {
+ pin->work_rx_msg = pin->rx_msg;
+ pin->work_rx_msg.rx_ts = ts;
+ wake_up_interruptible(&pin->kthread_waitq);
+ pin->ts = ts;
+ pin->state = CEC_ST_RX_ACK_FINISH;
+ break;
+ }
+ pin->rx_bit++;
+ pin->state = CEC_ST_RX_DATA_HIGH;
+ break;
+
+ case CEC_ST_RX_ACK_FINISH:
+ cec_pin_to_idle(pin);
+ break;
+
+ default:
+ break;
+ }
+}
+
+/*
+ * Main timer function
+ *
+ */
+static enum hrtimer_restart cec_pin_timer(struct hrtimer *timer)
+{
+ struct cec_pin *pin = container_of(timer, struct cec_pin, timer);
+ struct cec_adapter *adap = pin->adap;
+ ktime_t ts;
+ s32 delta;
+
+ ts = ktime_get();
+ if (pin->timer_ts) {
+ delta = ktime_us_delta(ts, pin->timer_ts);
+ pin->timer_cnt++;
+ if (delta > 100 && pin->state != CEC_ST_IDLE) {
+ /* Keep track of timer overruns */
+ pin->timer_sum_overrun += delta;
+ pin->timer_100ms_overruns++;
+ if (delta > 300)
+ pin->timer_300ms_overruns++;
+ if (delta > pin->timer_max_overrun)
+ pin->timer_max_overrun = delta;
+ }
+ }
+ if (adap->monitor_pin_cnt)
+ cec_pin_read(pin);
+
+ if (pin->wait_usecs) {
+ /*
+ * If we are monitoring the pin, then we have to
+ * sample at regular intervals.
+ */
+ if (pin->wait_usecs > 150) {
+ pin->wait_usecs -= 100;
+ pin->timer_ts = ktime_add_us(ts, 100);
+ hrtimer_forward_now(timer, 100000);
+ return HRTIMER_RESTART;
+ }
+ if (pin->wait_usecs > 100) {
+ pin->wait_usecs /= 2;
+ pin->timer_ts = ktime_add_us(ts, pin->wait_usecs);
+ hrtimer_forward_now(timer, pin->wait_usecs * 1000);
+ return HRTIMER_RESTART;
+ }
+ pin->timer_ts = ktime_add_us(ts, pin->wait_usecs);
+ hrtimer_forward_now(timer, pin->wait_usecs * 1000);
+ pin->wait_usecs = 0;
+ return HRTIMER_RESTART;
+ }
+
+ switch (pin->state) {
+ /* Transmit states */
+ case CEC_ST_TX_WAIT_FOR_HIGH:
+ case CEC_ST_TX_START_BIT_LOW:
+ case CEC_ST_TX_DATA_BIT_1_HIGH_POST_SAMPLE:
+ case CEC_ST_TX_DATA_BIT_0_HIGH:
+ case CEC_ST_TX_DATA_BIT_1_HIGH:
+ case CEC_ST_TX_START_BIT_HIGH:
+ case CEC_ST_TX_DATA_BIT_0_LOW:
+ case CEC_ST_TX_DATA_BIT_1_LOW:
+ case CEC_ST_TX_DATA_BIT_1_HIGH_PRE_SAMPLE:
+ cec_pin_tx_states(pin, ts);
+ break;
+
+ /* Receive states */
+ case CEC_ST_RX_START_BIT_LOW:
+ case CEC_ST_RX_START_BIT_HIGH:
+ case CEC_ST_RX_DATA_SAMPLE:
+ case CEC_ST_RX_DATA_POST_SAMPLE:
+ case CEC_ST_RX_DATA_HIGH:
+ case CEC_ST_RX_ACK_LOW:
+ case CEC_ST_RX_ACK_LOW_POST:
+ case CEC_ST_RX_ACK_HIGH_POST:
+ case CEC_ST_RX_ACK_FINISH:
+ cec_pin_rx_states(pin, ts);
+ break;
+
+ case CEC_ST_IDLE:
+ case CEC_ST_TX_WAIT:
+ if (!cec_pin_high(pin)) {
+ /* Start bit, switch to receive state */
+ pin->ts = ts;
+ pin->state = CEC_ST_RX_START_BIT_LOW;
+ break;
+ }
+ if (pin->ts == 0)
+ pin->ts = ts;
+ if (pin->tx_msg.len) {
+ /*
+ * Check if the bus has been free for long enough
+ * so we can kick off the pending transmit.
+ */
+ delta = ktime_us_delta(ts, pin->ts);
+ if (delta / CEC_TIM_DATA_BIT_TOTAL >
+ pin->tx_signal_free_time) {
+ pin->tx_nacked = false;
+ pin->state = CEC_ST_TX_START_BIT_LOW;
+ /* Generate start bit */
+ cec_pin_low(pin);
+ break;
+ }
+ if (delta / CEC_TIM_DATA_BIT_TOTAL >
+ pin->tx_signal_free_time - 1)
+ pin->state = CEC_ST_TX_WAIT;
+ break;
+ }
+ if (pin->state != CEC_ST_IDLE || pin->ops->enable_irq == NULL ||
+ pin->enable_irq_failed || adap->is_configuring ||
+ adap->is_configured || adap->monitor_all_cnt)
+ break;
+ /* Switch to interrupt mode */
+ pin->work_enable_irq = true;
+ pin->state = CEC_ST_RX_IRQ;
+ wake_up_interruptible(&pin->kthread_waitq);
+ return HRTIMER_NORESTART;
+
+ case CEC_ST_LOW_DRIVE:
+ cec_pin_to_idle(pin);
+ break;
+
+ default:
+ break;
+ }
+ if (!adap->monitor_pin_cnt || states[pin->state].usecs <= 150) {
+ pin->wait_usecs = 0;
+ pin->timer_ts = ktime_add_us(ts, states[pin->state].usecs);
+ hrtimer_forward_now(timer, states[pin->state].usecs * 1000);
+ return HRTIMER_RESTART;
+ }
+ pin->wait_usecs = states[pin->state].usecs - 100;
+ pin->timer_ts = ktime_add_us(ts, 100);
+ hrtimer_forward_now(timer, 100000);
+ return HRTIMER_RESTART;
+}
+
+static int cec_pin_thread_func(void *_adap)
+{
+ struct cec_adapter *adap = _adap;
+ struct cec_pin *pin = adap->pin;
+
+ for (;;) {
+ wait_event_interruptible(pin->kthread_waitq,
+ kthread_should_stop() ||
+ pin->work_rx_msg.len ||
+ pin->work_tx_status ||
+ pin->work_enable_irq ||
+ atomic_read(&pin->work_pin_events));
+
+ if (pin->work_rx_msg.len) {
+ cec_received_msg_ts(adap, &pin->work_rx_msg,
+ pin->work_rx_msg.rx_ts);
+ pin->work_rx_msg.len = 0;
+ }
+ if (pin->work_tx_status) {
+ unsigned int tx_status = pin->work_tx_status;
+
+ pin->work_tx_status = 0;
+ cec_transmit_attempt_done_ts(adap, tx_status,
+ pin->work_tx_ts);
+ }
+ while (atomic_read(&pin->work_pin_events)) {
+ unsigned int idx = pin->work_pin_events_rd;
+
+ cec_queue_pin_event(adap, pin->work_pin_is_high[idx],
+ pin->work_pin_ts[idx]);
+ pin->work_pin_events_rd = (idx + 1) % CEC_NUM_PIN_EVENTS;
+ atomic_dec(&pin->work_pin_events);
+ }
+ if (pin->work_enable_irq) {
+ pin->work_enable_irq = false;
+ pin->enable_irq_failed = !pin->ops->enable_irq(adap);
+ if (pin->enable_irq_failed) {
+ cec_pin_to_idle(pin);
+ hrtimer_start(&pin->timer, 0, HRTIMER_MODE_REL);
+ }
+ }
+ if (kthread_should_stop())
+ break;
+ }
+ return 0;
+}
+
+static int cec_pin_adap_enable(struct cec_adapter *adap, bool enable)
+{
+ struct cec_pin *pin = adap->pin;
+
+ pin->enabled = enable;
+ if (enable) {
+ atomic_set(&pin->work_pin_events, 0);
+ pin->work_pin_events_rd = pin->work_pin_events_wr = 0;
+ cec_pin_read(pin);
+ cec_pin_to_idle(pin);
+ pin->tx_msg.len = 0;
+ pin->timer_ts = 0;
+ pin->work_enable_irq = false;
+ pin->kthread = kthread_run(cec_pin_thread_func, adap,
+ "cec-pin");
+ if (IS_ERR(pin->kthread)) {
+ pr_err("cec-pin: kernel_thread() failed\n");
+ return PTR_ERR(pin->kthread);
+ }
+ hrtimer_start(&pin->timer, 0, HRTIMER_MODE_REL);
+ } else {
+ if (pin->ops->disable_irq)
+ pin->ops->disable_irq(adap);
+ hrtimer_cancel(&pin->timer);
+ kthread_stop(pin->kthread);
+ cec_pin_read(pin);
+ cec_pin_to_idle(pin);
+ pin->state = CEC_ST_OFF;
+ }
+ return 0;
+}
+
+static int cec_pin_adap_log_addr(struct cec_adapter *adap, u8 log_addr)
+{
+ struct cec_pin *pin = adap->pin;
+
+ if (log_addr == CEC_LOG_ADDR_INVALID)
+ pin->la_mask = 0;
+ else
+ pin->la_mask |= (1 << log_addr);
+ return 0;
+}
+
+static int cec_pin_adap_transmit(struct cec_adapter *adap, u8 attempts,
+ u32 signal_free_time, struct cec_msg *msg)
+{
+ struct cec_pin *pin = adap->pin;
+
+ pin->tx_signal_free_time = signal_free_time;
+ pin->tx_msg = *msg;
+ pin->work_tx_status = 0;
+ pin->tx_bit = 0;
+ if (pin->state == CEC_ST_RX_IRQ) {
+ pin->work_enable_irq = false;
+ pin->ops->disable_irq(adap);
+ cec_pin_high(pin);
+ cec_pin_to_idle(pin);
+ hrtimer_start(&pin->timer, 0, HRTIMER_MODE_REL);
+ }
+ return 0;
+}
+
+static void cec_pin_adap_status(struct cec_adapter *adap,
+ struct seq_file *file)
+{
+ struct cec_pin *pin = adap->pin;
+
+ seq_printf(file, "state: %s\n", states[pin->state].name);
+ seq_printf(file, "tx_bit: %d\n", pin->tx_bit);
+ seq_printf(file, "rx_bit: %d\n", pin->rx_bit);
+ seq_printf(file, "cec pin: %d\n", pin->ops->read(adap));
+ seq_printf(file, "irq failed: %d\n", pin->enable_irq_failed);
+ if (pin->timer_100ms_overruns) {
+ seq_printf(file, "timer overruns > 100ms: %u of %u\n",
+ pin->timer_100ms_overruns, pin->timer_cnt);
+ seq_printf(file, "timer overruns > 300ms: %u of %u\n",
+ pin->timer_300ms_overruns, pin->timer_cnt);
+ seq_printf(file, "max timer overrun: %u usecs\n",
+ pin->timer_max_overrun);
+ seq_printf(file, "avg timer overrun: %u usecs\n",
+ pin->timer_sum_overrun / pin->timer_100ms_overruns);
+ }
+ pin->timer_cnt = 0;
+ pin->timer_100ms_overruns = 0;
+ pin->timer_300ms_overruns = 0;
+ pin->timer_max_overrun = 0;
+ pin->timer_sum_overrun = 0;
+ if (pin->ops->status)
+ pin->ops->status(adap, file);
+}
+
+static int cec_pin_adap_monitor_all_enable(struct cec_adapter *adap,
+ bool enable)
+{
+ struct cec_pin *pin = adap->pin;
+
+ pin->monitor_all = enable;
+ return 0;
+}
+
+static void cec_pin_adap_free(struct cec_adapter *adap)
+{
+ struct cec_pin *pin = adap->pin;
+
+ if (pin->ops->free)
+ pin->ops->free(adap);
+ adap->pin = NULL;
+ kfree(pin);
+}
+
+void cec_pin_changed(struct cec_adapter *adap, bool value)
+{
+ struct cec_pin *pin = adap->pin;
+
+ cec_pin_update(pin, value, false);
+ if (!value && (adap->is_configuring || adap->is_configured ||
+ adap->monitor_all_cnt)) {
+ pin->work_enable_irq = false;
+ pin->ops->disable_irq(adap);
+ cec_pin_high(pin);
+ cec_pin_to_idle(pin);
+ hrtimer_start(&pin->timer, 0, HRTIMER_MODE_REL);
+ }
+}
+EXPORT_SYMBOL_GPL(cec_pin_changed);
+
+static const struct cec_adap_ops cec_pin_adap_ops = {
+ .adap_enable = cec_pin_adap_enable,
+ .adap_monitor_all_enable = cec_pin_adap_monitor_all_enable,
+ .adap_log_addr = cec_pin_adap_log_addr,
+ .adap_transmit = cec_pin_adap_transmit,
+ .adap_status = cec_pin_adap_status,
+ .adap_free = cec_pin_adap_free,
+};
+
+struct cec_adapter *cec_pin_allocate_adapter(const struct cec_pin_ops *pin_ops,
+ void *priv, const char *name, u32 caps)
+{
+ struct cec_adapter *adap;
+ struct cec_pin *pin = kzalloc(sizeof(*pin), GFP_KERNEL);
+
+ if (pin == NULL)
+ return ERR_PTR(-ENOMEM);
+ pin->ops = pin_ops;
+ pin->cur_value = true;
+ hrtimer_init(&pin->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+ pin->timer.function = cec_pin_timer;
+ init_waitqueue_head(&pin->kthread_waitq);
+
+ adap = cec_allocate_adapter(&cec_pin_adap_ops, priv, name,
+ caps | CEC_CAP_MONITOR_ALL | CEC_CAP_MONITOR_PIN,
+ CEC_MAX_LOG_ADDRS);
+
+ if (PTR_ERR_OR_ZERO(adap)) {
+ kfree(pin);
+ return adap;
+ }
+
+ adap->pin = pin;
+ pin->adap = adap;
+ cec_pin_update(pin, cec_pin_high(pin), true);
+ return adap;
+}
+EXPORT_SYMBOL_GPL(cec_pin_allocate_adapter);
new file mode 100644
@@ -0,0 +1,183 @@
+/*
+ * cec-pin.h - low-level CEC pin control
+ *
+ * Copyright 2017 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef LINUX_CEC_PIN_H
+#define LINUX_CEC_PIN_H
+
+#include <linux/types.h>
+#include <linux/atomic.h>
+#include <media/cec.h>
+
+enum cec_pin_state {
+ /* CEC is off */
+ CEC_ST_OFF,
+ /* CEC is idle, waiting for Rx or Tx */
+ CEC_ST_IDLE,
+
+ /* Tx states */
+
+ /* Pending Tx, waiting for Signal Free Time to expire */
+ CEC_ST_TX_WAIT,
+ /* Low-drive was detected, wait for bus to go high */
+ CEC_ST_TX_WAIT_FOR_HIGH,
+ /* Drive CEC low for the start bit */
+ CEC_ST_TX_START_BIT_LOW,
+ /* Drive CEC high for the start bit */
+ CEC_ST_TX_START_BIT_HIGH,
+ /* Drive CEC low for the 0 bit */
+ CEC_ST_TX_DATA_BIT_0_LOW,
+ /* Drive CEC high for the 0 bit */
+ CEC_ST_TX_DATA_BIT_0_HIGH,
+ /* Drive CEC low for the 1 bit */
+ CEC_ST_TX_DATA_BIT_1_LOW,
+ /* Drive CEC high for the 1 bit */
+ CEC_ST_TX_DATA_BIT_1_HIGH,
+ /*
+ * Wait for start of sample time to check for Ack bit or first
+ * four initiator bits to check for Arbitration Lost.
+ */
+ CEC_ST_TX_DATA_BIT_1_HIGH_PRE_SAMPLE,
+ /* Wait for end of bit period after sampling */
+ CEC_ST_TX_DATA_BIT_1_HIGH_POST_SAMPLE,
+
+ /* Rx states */
+
+ /* Start bit low detected */
+ CEC_ST_RX_START_BIT_LOW,
+ /* Start bit high detected */
+ CEC_ST_RX_START_BIT_HIGH,
+ /* Wait for bit sample time */
+ CEC_ST_RX_DATA_SAMPLE,
+ /* Wait for earliest end of bit period after sampling */
+ CEC_ST_RX_DATA_POST_SAMPLE,
+ /* Wait for CEC to go high (i.e. end of bit period */
+ CEC_ST_RX_DATA_HIGH,
+ /* Drive CEC low to send 0 Ack bit */
+ CEC_ST_RX_ACK_LOW,
+ /* End of 0 Ack time, wait for earliest end of bit period */
+ CEC_ST_RX_ACK_LOW_POST,
+ /* Wait for CEC to go high (i.e. end of bit period */
+ CEC_ST_RX_ACK_HIGH_POST,
+ /* Wait for earliest end of bit period and end of message */
+ CEC_ST_RX_ACK_FINISH,
+
+ /* Start low drive */
+ CEC_ST_LOW_DRIVE,
+ /* Monitor pin using interrupts */
+ CEC_ST_RX_IRQ,
+
+ /* Total number of pin states */
+ CEC_PIN_STATES
+};
+
+/**
+ * struct cec_pin_ops - low-level CEC pin operations
+ * @read: read the CEC pin. Return true if high, false if low.
+ * @low: drive the CEC pin low.
+ * @high: stop driving the CEC pin. The pull-up will drive the pin
+ * high, unless someone else is driving the pin low.
+ * @enable_irq: optional, enable the interrupt to detect pin voltage changes.
+ * @disable_irq: optional, disable the interrupt.
+ * @free: optional. Free any allocated resources. Called when the
+ * adapter is deleted.
+ * @status: optional, log status information.
+ *
+ * These operations are used by the cec pin framework to manipulate
+ * the CEC pin.
+ */
+struct cec_pin_ops {
+ bool (*read)(struct cec_adapter *adap);
+ void (*low)(struct cec_adapter *adap);
+ void (*high)(struct cec_adapter *adap);
+ bool (*enable_irq)(struct cec_adapter *adap);
+ void (*disable_irq)(struct cec_adapter *adap);
+ void (*free)(struct cec_adapter *adap);
+ void (*status)(struct cec_adapter *adap, struct seq_file *file);
+};
+
+#define CEC_NUM_PIN_EVENTS 128
+
+struct cec_pin {
+ struct cec_adapter *adap;
+ const struct cec_pin_ops *ops;
+ struct task_struct *kthread;
+ wait_queue_head_t kthread_waitq;
+ struct hrtimer timer;
+ ktime_t ts;
+ unsigned int wait_usecs;
+ u16 la_mask;
+ bool enabled;
+ bool monitor_all;
+ bool cur_value;
+ bool rx_eom;
+ bool enable_irq_failed;
+ enum cec_pin_state state;
+ struct cec_msg tx_msg;
+ u32 tx_bit;
+ bool tx_nacked;
+ u32 tx_signal_free_time;
+ struct cec_msg rx_msg;
+ u32 rx_bit;
+
+ struct cec_msg work_rx_msg;
+ u8 work_tx_status;
+ bool work_enable_irq;
+ ktime_t work_tx_ts;
+ atomic_t work_pin_events;
+ unsigned int work_pin_events_wr;
+ unsigned int work_pin_events_rd;
+ ktime_t work_pin_ts[CEC_NUM_PIN_EVENTS];
+ bool work_pin_is_high[CEC_NUM_PIN_EVENTS];
+ ktime_t timer_ts;
+ u32 timer_cnt;
+ u32 timer_100ms_overruns;
+ u32 timer_300ms_overruns;
+ u32 timer_max_overrun;
+ u32 timer_sum_overrun;
+};
+
+/**
+ * cec_pin_changed() - update pin state from interrupt
+ *
+ * @adap: pointer to the cec adapter
+ * @value: when true the pin is high, otherwise it is low
+ *
+ * If changes of the CEC voltage are detected via an interrupt, then
+ * cec_pin_changed is called from the interrupt with the new value.
+ */
+void cec_pin_changed(struct cec_adapter *adap, bool value);
+
+/**
+ * cec_pin_allocate_adapter() - allocate a pin-based cec adapter
+ *
+ * @pin_ops: low-level pin operations
+ * @priv: will be stored in adap->priv and can be used by the adapter ops.
+ * Use cec_get_drvdata(adap) to get the priv pointer.
+ * @name: the name of the CEC adapter. Note: this name will be copied.
+ * @caps: capabilities of the CEC adapter. This will be ORed with
+ * CEC_CAP_MONITOR_ALL and CEC_CAP_MONITOR_PIN.
+ *
+ * Allocate a cec adapter using the cec pin framework.
+ *
+ * Return: a pointer to the cec adapter or an error pointer
+ */
+struct cec_adapter *cec_pin_allocate_adapter(const struct cec_pin_ops *pin_ops,
+ void *priv, const char *name, u32 caps);
+
+#endif
@@ -61,6 +61,7 @@ struct cec_devnode {
struct cec_adapter;
struct cec_data;
+struct cec_pin;
struct cec_data {
struct list_head list;
@@ -189,6 +190,9 @@ struct cec_adapter {
#ifdef CONFIG_CEC_NOTIFIER
struct cec_notifier *notifier;
#endif
+#ifdef CONFIG_CEC_PIN
+ struct cec_pin *pin;
+#endif
struct dentry *cec_dir;
struct dentry *status_file;