diff mbox

[1/4] dt-bindings: adi,adv7511.txt: document cec clock

Message ID 20170730130743.19681-2-hverkuil@xs4all.nl (mailing list archive)
State New, archived
Headers show

Commit Message

Hans Verkuil July 30, 2017, 1:07 p.m. UTC 
From: Hans Verkuil <hans.verkuil@cisco.com>

Document the cec clock binding.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
---
 Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt | 4 ++++
 1 file changed, 4 insertions(+)

Comments

Rob Herring Aug. 3, 2017, 11:35 p.m. UTC | #1 
On Sun, Jul 30, 2017 at 03:07:40PM +0200, Hans Verkuil wrote:
> From: Hans Verkuil <hans.verkuil@cisco.com>
> 
> Document the cec clock binding.
> 
> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
> ---
>  Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt | 4 ++++
>  1 file changed, 4 insertions(+)

Acked-by: Rob Herring <robh@kernel.org>
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
index 06668bca7ffc..4497ae054d49 100644
--- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
+++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
@@ -68,6 +68,8 @@  Optional properties:
 - adi,disable-timing-generator: Only for ADV7533. Disables the internal timing
   generator. The chip will rely on the sync signals in the DSI data lanes,
   rather than generate its own timings for HDMI output.
+- clocks: from common clock binding: handle to CEC clock.
+- clock-names: from common clock binding: must be "cec".
 
 Required nodes:
 
@@ -89,6 +91,8 @@  Example
 		reg = <39>;
 		interrupt-parent = <&gpio3>;
 		interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
+		clocks = <&cec_clock>;
+		clock-names = "cec";
 
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";