@@ -15,6 +15,7 @@ Linux GPU Driver Developer's Guide
pl111
tegra
tinydrm
+ tve200
vc4
vga-switcheroo
vgaarbiter
new file mode 100644
@@ -0,0 +1,6 @@
+==================================
+ drm/tve200 Faraday TV Encoder 200
+==================================
+
+.. kernel-doc:: drivers/gpu/drm/tve200/tve200_drv.c
+ :doc: Faraday TV Encoder 200
@@ -4305,6 +4305,12 @@ T: git git://anongit.freedesktop.org/drm/drm-misc
S: Maintained
F: drivers/gpu/drm/bochs/
+DRM DRIVER FOR FARADAY TVE200 TV ENCODER
+M: Linus Walleij <linus.walleij@linaro.org>
+T: git git://anongit.freedesktop.org/drm/drm-misc
+S: Maintained
+F: drivers/gpu/drm/tve200/
+
DRM DRIVER FOR INTEL I810 VIDEO CARDS
S: Orphan / Obsolete
F: drivers/gpu/drm/i810/
@@ -278,6 +278,8 @@ source "drivers/gpu/drm/tinydrm/Kconfig"
source "drivers/gpu/drm/pl111/Kconfig"
+source "drivers/gpu/drm/tve200/Kconfig"
+
# Keep legacy drivers last
menuconfig DRM_LEGACY
@@ -100,3 +100,4 @@ obj-$(CONFIG_DRM_ZTE) += zte/
obj-$(CONFIG_DRM_MXSFB) += mxsfb/
obj-$(CONFIG_DRM_TINYDRM) += tinydrm/
obj-$(CONFIG_DRM_PL111) += pl111/
+obj-$(CONFIG_DRM_TVE200) += tve200/
new file mode 100644
@@ -0,0 +1,15 @@
+config DRM_TVE200
+ tristate "DRM Support for Faraday TV Encoder TVE200"
+ depends on DRM
+ depends on CMA
+ depends on ARM || COMPILE_TEST
+ depends on OF
+ select DRM_PANEL
+ select DRM_KMS_HELPER
+ select DRM_KMS_CMA_HELPER
+ select DRM_GEM_CMA_HELPER
+ select VT_HW_CONSOLE_BINDING if FRAMEBUFFER_CONSOLE
+ help
+ Choose this option for DRM support for the Faraday TV Encoder
+ TVE200 Controller.
+ If M is selected the module will be called tve200_drm.
new file mode 100644
@@ -0,0 +1,5 @@
+tve200_drm-y += tve200_connector.o \
+ tve200_display.o \
+ tve200_drv.o
+
+obj-$(CONFIG_DRM_TVE200) += tve200_drm.o
new file mode 100644
@@ -0,0 +1,125 @@
+/*
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ * Parts of this file were based on sources as follows:
+ *
+ * Copyright (C) 2006-2008 Intel Corporation
+ * Copyright (C) 2007 Amos Lee <amos_lee@storlinksemi.com>
+ * Copyright (C) 2007 Dave Airlie <airlied@linux.ie>
+ * Copyright (C) 2011 Texas Instruments
+ * Copyright (C) 2017 Eric Anholt
+ *
+ * This program is free software and is provided to you under the terms of the
+ * GNU General Public License version 2 as published by the Free Software
+ * Foundation, and any use by you of this program is subject to the terms of
+ * such GNU licence.
+ */
+
+/**
+ * tve200_drm_connector.c
+ * Implementation of the connector functions for the Faraday TV Encoder
+ */
+#include <linux/version.h>
+#include <linux/shmem_fs.h>
+#include <linux/dma-buf.h>
+
+#include <drm/drmP.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_of.h>
+#include <drm/drm_panel.h>
+
+#include "tve200_drm.h"
+
+static void tve200_connector_destroy(struct drm_connector *connector)
+{
+ struct tve200_drm_connector *tve200con =
+ to_tve200_connector(connector);
+
+ if (tve200con->panel)
+ drm_panel_detach(tve200con->panel);
+
+ drm_connector_unregister(connector);
+ drm_connector_cleanup(connector);
+}
+
+static enum drm_connector_status tve200_connector_detect(struct drm_connector
+ *connector, bool force)
+{
+ struct tve200_drm_connector *tve200con =
+ to_tve200_connector(connector);
+
+ return (tve200con->panel ?
+ connector_status_connected :
+ connector_status_disconnected);
+}
+
+static int tve200_connector_helper_get_modes(struct drm_connector *connector)
+{
+ struct tve200_drm_connector *tve200con =
+ to_tve200_connector(connector);
+
+ if (!tve200con->panel)
+ return 0;
+
+ return drm_panel_get_modes(tve200con->panel);
+}
+
+static const struct drm_connector_funcs connector_funcs = {
+ .fill_modes = drm_helper_probe_single_connector_modes,
+ .destroy = tve200_connector_destroy,
+ .detect = tve200_connector_detect,
+ .reset = drm_atomic_helper_connector_reset,
+ .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+ .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static const struct drm_connector_helper_funcs connector_helper_funcs = {
+ .get_modes = tve200_connector_helper_get_modes,
+};
+
+/*
+ * Walks the OF graph to find the panel node and then asks DRM to look
+ * up the panel.
+ */
+static struct drm_panel *tve200_get_panel(struct device *dev)
+{
+ struct device_node *endpoint, *panel_node;
+ struct device_node *np = dev->of_node;
+ struct drm_panel *panel;
+
+ endpoint = of_graph_get_next_endpoint(np, NULL);
+ if (!endpoint) {
+ dev_err(dev, "no endpoint to fetch panel\n");
+ return NULL;
+ }
+
+ /* Don't proceed if we have an endpoint but no panel_node tied to it */
+ panel_node = of_graph_get_remote_port_parent(endpoint);
+ of_node_put(endpoint);
+ if (!panel_node) {
+ dev_err(dev, "no valid panel node\n");
+ return NULL;
+ }
+
+ panel = of_drm_find_panel(panel_node);
+ of_node_put(panel_node);
+
+ return panel;
+}
+
+int tve200_connector_init(struct drm_device *dev)
+{
+ struct tve200_drm_dev_private *priv = dev->dev_private;
+ struct tve200_drm_connector *tve200con = &priv->connector;
+ struct drm_connector *connector = &tve200con->connector;
+
+ drm_connector_init(dev, connector, &connector_funcs,
+ DRM_MODE_CONNECTOR_DPI);
+ drm_connector_helper_add(connector, &connector_helper_funcs);
+
+ tve200con->panel = tve200_get_panel(dev->dev);
+ if (tve200con->panel)
+ drm_panel_attach(tve200con->panel, connector);
+
+ return 0;
+}
new file mode 100644
@@ -0,0 +1,344 @@
+/*
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ * Parts of this file were based on sources as follows:
+ *
+ * Copyright (C) 2006-2008 Intel Corporation
+ * Copyright (C) 2007 Amos Lee <amos_lee@storlinksemi.com>
+ * Copyright (C) 2007 Dave Airlie <airlied@linux.ie>
+ * Copyright (C) 2011 Texas Instruments
+ * Copyright (C) 2017 Eric Anholt
+ *
+ * This program is free software and is provided to you under the terms of the
+ * GNU General Public License version 2 as published by the Free Software
+ * Foundation, and any use by you of this program is subject to the terms of
+ * such GNU licence.
+ */
+#include <linux/clk.h>
+#include <linux/version.h>
+#include <linux/dma-buf.h>
+#include <linux/of_graph.h>
+
+#include <drm/drmP.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_gem_cma_helper.h>
+#include <drm/drm_fb_cma_helper.h>
+
+#include "tve200_drm.h"
+
+irqreturn_t tve200_irq(int irq, void *data)
+{
+ struct tve200_drm_dev_private *priv = data;
+ u32 stat;
+ u32 val;
+
+ stat = readl(priv->regs + TVE200_INT_STAT);
+
+ if (!stat)
+ return IRQ_NONE;
+
+ /*
+ * Vblank IRQ
+ *
+ * The hardware is a bit tilted: the line stays high after clearing
+ * the vblank IRQ, firing many more interrupts. We counter this
+ * by toggling the IRQ back and forth from firing at vblank and
+ * firing at start of active image, which works around the problem
+ * since those occur strictly in sequence, and we get two IRQs for each
+ * frame, one at start of Vblank (that we make call into the CRTC) and
+ * another one at the start of the image (that we discard).
+ */
+ if (stat & TVE200_INT_V_STATUS) {
+ val = readl(priv->regs + TVE200_CTRL);
+ /* We have an actual start of vsync */
+ if (!(val & TVE200_VSTSTYPE_BITS)) {
+ drm_crtc_handle_vblank(&priv->pipe.crtc);
+ /* Toggle trigger to start of active image */
+ val |= TVE200_VSTSTYPE_VAI;
+ } else {
+ /* Toggle trigger back to start of vsync */
+ val &= ~TVE200_VSTSTYPE_BITS;
+ }
+ writel(val, priv->regs + TVE200_CTRL);
+ } else
+ dev_err(priv->drm->dev, "stray IRQ %08x\n", stat);
+
+ /* Clear the interrupt once done */
+ writel(stat, priv->regs + TVE200_INT_CLR);
+
+ return IRQ_HANDLED;
+}
+
+static int tve200_display_check(struct drm_simple_display_pipe *pipe,
+ struct drm_plane_state *pstate,
+ struct drm_crtc_state *cstate)
+{
+ const struct drm_display_mode *mode = &cstate->mode;
+ struct drm_framebuffer *old_fb = pipe->plane.state->fb;
+ struct drm_framebuffer *fb = pstate->fb;
+
+ /*
+ * We support these specific resolutions and nothing else.
+ */
+ if (!(mode->hdisplay == 352 && mode->vdisplay == 240) && /* SIF(525) */
+ !(mode->hdisplay == 352 && mode->vdisplay == 288) && /* CIF(625) */
+ !(mode->hdisplay == 640 && mode->vdisplay == 480) && /* VGA */
+ !(mode->hdisplay == 720 && mode->vdisplay == 480) && /* D1 */
+ !(mode->hdisplay == 720 && mode->vdisplay == 576)) { /* D1 */
+ DRM_DEBUG_KMS("unsupported display mode (%u x %u)\n",
+ mode->hdisplay, mode->vdisplay);
+ return -EINVAL;
+ }
+
+ if (fb) {
+ u32 offset = drm_fb_cma_get_gem_addr(fb, pstate, 0);
+
+ /* FB base address must be dword aligned. */
+ if (offset & 3) {
+ DRM_DEBUG_KMS("FB not 32-bit aligned\n");
+ return -EINVAL;
+ }
+
+ /*
+ * There's no pitch register, the mode's hdisplay
+ * controls this.
+ */
+ if (fb->pitches[0] != mode->hdisplay * fb->format->cpp[0]) {
+ DRM_DEBUG_KMS("can't handle pitches\n");
+ return -EINVAL;
+ }
+
+ /*
+ * We can't change the FB format in a flicker-free
+ * manner (and only update it during CRTC enable).
+ */
+ if (old_fb && old_fb->format != fb->format)
+ cstate->mode_changed = true;
+ }
+
+ return 0;
+}
+
+static void tve200_display_enable(struct drm_simple_display_pipe *pipe,
+ struct drm_crtc_state *cstate)
+{
+ struct drm_crtc *crtc = &pipe->crtc;
+ struct drm_plane *plane = &pipe->plane;
+ struct drm_device *drm = crtc->dev;
+ struct tve200_drm_dev_private *priv = drm->dev_private;
+ const struct drm_display_mode *mode = &cstate->mode;
+ struct drm_framebuffer *fb = plane->state->fb;
+ struct drm_connector *connector = &priv->connector.connector;
+ u32 format = fb->format->format;
+ u32 ctrl1 = 0;
+
+ clk_prepare_enable(priv->clk);
+
+ /* Function 1 */
+ ctrl1 |= TVE200_CTRL_CSMODE;
+ /* Interlace mode for CCIR656: parameterize? */
+ ctrl1 |= TVE200_CTRL_NONINTERLACE;
+ /* 32 words per burst */
+ ctrl1 |= TVE200_CTRL_BURST_32_WORDS;
+ /* 16 retries */
+ ctrl1 |= TVE200_CTRL_RETRYCNT_16;
+ /* NTSC mode: parametrize? */
+ ctrl1 |= TVE200_CTRL_NTSC;
+
+ /* Vsync IRQ at start of Vsync at first */
+ ctrl1 |= TVE200_VSTSTYPE_VSYNC;
+
+ if (connector->display_info.bus_flags & DRM_BUS_FLAG_PIXDATA_NEGEDGE)
+ ctrl1 |= TVE200_CTRL_TVCLKP;
+
+ if ((mode->hdisplay == 352 && mode->vdisplay == 240) || /* SIF(525) */
+ (mode->hdisplay == 352 && mode->vdisplay == 288)) { /* CIF(625) */
+ ctrl1 |= TVE200_CTRL_IPRESOL_CIF;
+ dev_info(drm->dev, "CIF mode\n");
+ } else if (mode->hdisplay == 640 && mode->vdisplay == 480) {
+ ctrl1 |= TVE200_CTRL_IPRESOL_VGA;
+ dev_info(drm->dev, "VGA mode\n");
+ } else if ((mode->hdisplay == 720 && mode->vdisplay == 480) ||
+ (mode->hdisplay == 720 && mode->vdisplay == 576)) {
+ ctrl1 |= TVE200_CTRL_IPRESOL_D1;
+ dev_info(drm->dev, "D1 mode\n");
+ }
+
+ if (format & DRM_FORMAT_BIG_ENDIAN) {
+ ctrl1 |= TVE200_CTRL_BBBP;
+ format &= ~DRM_FORMAT_BIG_ENDIAN;
+ }
+
+ switch (format) {
+ case DRM_FORMAT_XRGB8888:
+ ctrl1 |= TVE200_IPDMOD_RGB888;
+ break;
+ case DRM_FORMAT_RGB565:
+ ctrl1 |= TVE200_IPDMOD_RGB565;
+ break;
+ case DRM_FORMAT_XRGB1555:
+ ctrl1 |= TVE200_IPDMOD_RGB555;
+ break;
+ case DRM_FORMAT_XBGR8888:
+ ctrl1 |= TVE200_IPDMOD_RGB888 | TVE200_BGR;
+ break;
+ case DRM_FORMAT_BGR565:
+ ctrl1 |= TVE200_IPDMOD_RGB565 | TVE200_BGR;
+ break;
+ case DRM_FORMAT_XBGR1555:
+ ctrl1 |= TVE200_IPDMOD_RGB555 | TVE200_BGR;
+ break;
+ case DRM_FORMAT_YUYV:
+ ctrl1 |= TVE200_IPDMOD_YUV422;
+ ctrl1 |= TVE200_CTRL_YCBCRODR_CR0Y1CB0Y0;
+ break;
+ case DRM_FORMAT_YVYU:
+ ctrl1 |= TVE200_IPDMOD_YUV422;
+ ctrl1 |= TVE200_CTRL_YCBCRODR_CB0Y1CR0Y0;
+ break;
+ case DRM_FORMAT_UYVY:
+ ctrl1 |= TVE200_IPDMOD_YUV422;
+ ctrl1 |= TVE200_CTRL_YCBCRODR_Y1CR0Y0CB0;
+ break;
+ case DRM_FORMAT_VYUY:
+ ctrl1 |= TVE200_IPDMOD_YUV422;
+ ctrl1 |= TVE200_CTRL_YCBCRODR_Y1CB0Y0CR0;
+ break;
+ case DRM_FORMAT_YUV420:
+ ctrl1 |= TVE200_CTRL_YUV420;
+ ctrl1 |= TVE200_IPDMOD_YUV420;
+ break;
+ default:
+ dev_err(drm->dev, "Unknown FB format 0x%08x\n",
+ fb->format->format);
+ break;
+ }
+
+ ctrl1 |= TVE200_TVEEN;
+
+ drm_panel_prepare(priv->connector.panel);
+
+ /* Turn it on */
+ writel(ctrl1, priv->regs + TVE200_CTRL);
+
+ drm_panel_enable(priv->connector.panel);
+
+ drm_crtc_vblank_on(crtc);
+}
+
+void tve200_display_disable(struct drm_simple_display_pipe *pipe)
+{
+ struct drm_crtc *crtc = &pipe->crtc;
+ struct drm_device *drm = crtc->dev;
+ struct tve200_drm_dev_private *priv = drm->dev_private;
+
+ drm_crtc_vblank_off(crtc);
+
+ drm_panel_disable(priv->connector.panel);
+
+ /* Disable and Power Down */
+ writel(0, priv->regs + TVE200_CTRL);
+
+ drm_panel_unprepare(priv->connector.panel);
+
+ clk_disable_unprepare(priv->clk);
+}
+
+static void tve200_display_update(struct drm_simple_display_pipe *pipe,
+ struct drm_plane_state *old_pstate)
+{
+ struct drm_crtc *crtc = &pipe->crtc;
+ struct drm_device *drm = crtc->dev;
+ struct tve200_drm_dev_private *priv = drm->dev_private;
+ struct drm_pending_vblank_event *event = crtc->state->event;
+ struct drm_plane *plane = &pipe->plane;
+ struct drm_plane_state *pstate = plane->state;
+ struct drm_framebuffer *fb = pstate->fb;
+
+ if (fb) {
+ /* For RGB, the Y component is used as base address */
+ writel(drm_fb_cma_get_gem_addr(fb, pstate, 0),
+ priv->regs + TVE200_Y_FRAME_BASE_ADDR);
+
+ /* For three plane YUV we need two more addresses */
+ if (fb->format->format == DRM_FORMAT_YUV420) {
+ writel(drm_fb_cma_get_gem_addr(fb, pstate, 1),
+ priv->regs + TVE200_U_FRAME_BASE_ADDR);
+ writel(drm_fb_cma_get_gem_addr(fb, pstate, 2),
+ priv->regs + TVE200_V_FRAME_BASE_ADDR);
+ }
+ }
+
+ if (event) {
+ crtc->state->event = NULL;
+
+ spin_lock_irq(&crtc->dev->event_lock);
+ if (crtc->state->active && drm_crtc_vblank_get(crtc) == 0)
+ drm_crtc_arm_vblank_event(crtc, event);
+ else
+ drm_crtc_send_vblank_event(crtc, event);
+ spin_unlock_irq(&crtc->dev->event_lock);
+ }
+}
+
+int tve200_enable_vblank(struct drm_device *drm, unsigned int crtc)
+{
+ struct tve200_drm_dev_private *priv = drm->dev_private;
+
+ writel(TVE200_INT_V_STATUS, priv->regs + TVE200_INT_EN);
+ return 0;
+}
+
+void tve200_disable_vblank(struct drm_device *drm, unsigned int crtc)
+{
+ struct tve200_drm_dev_private *priv = drm->dev_private;
+
+ writel(0, priv->regs + TVE200_INT_EN);
+}
+
+static int tve200_display_prepare_fb(struct drm_simple_display_pipe *pipe,
+ struct drm_plane_state *plane_state)
+{
+ return drm_fb_cma_prepare_fb(&pipe->plane, plane_state);
+}
+
+const struct drm_simple_display_pipe_funcs tve200_display_funcs = {
+ .check = tve200_display_check,
+ .enable = tve200_display_enable,
+ .disable = tve200_display_disable,
+ .update = tve200_display_update,
+ .prepare_fb = tve200_display_prepare_fb,
+};
+
+int tve200_display_init(struct drm_device *drm)
+{
+ struct tve200_drm_dev_private *priv = drm->dev_private;
+ int ret;
+ static const u32 formats[] = {
+ DRM_FORMAT_XRGB8888,
+ DRM_FORMAT_XBGR8888,
+ DRM_FORMAT_RGB565,
+ DRM_FORMAT_BGR565,
+ DRM_FORMAT_XRGB1555,
+ DRM_FORMAT_XBGR1555,
+ /*
+ * The controller actually supports any YCbCr ordering,
+ * for packed YCbCr. This just lists the orderings that
+ * DRM supports.
+ */
+ DRM_FORMAT_YUYV,
+ DRM_FORMAT_YVYU,
+ DRM_FORMAT_UYVY,
+ DRM_FORMAT_VYUY,
+ /* This uses three planes */
+ DRM_FORMAT_YUV420,
+ };
+
+ ret = drm_simple_display_pipe_init(drm, &priv->pipe,
+ &tve200_display_funcs,
+ formats, ARRAY_SIZE(formats),
+ &priv->connector.connector);
+ if (ret)
+ return ret;
+
+ return 0;
+}
new file mode 100644
@@ -0,0 +1,129 @@
+/*
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ * Parts of this file were based on sources as follows:
+ *
+ * Copyright (C) 2006-2008 Intel Corporation
+ * Copyright (C) 2007 Amos Lee <amos_lee@storlinksemi.com>
+ * Copyright (C) 2007 Dave Airlie <airlied@linux.ie>
+ * Copyright (C) 2011 Texas Instruments
+ * Copyright (C) 2017 Eric Anholt
+ *
+ * This program is free software and is provided to you under the terms of the
+ * GNU General Public License version 2 as published by the Free Software
+ * Foundation, and any use by you of this program is subject to the terms of
+ * such GNU licence.
+ */
+
+#ifndef _TVE200_DRM_H_
+#define _TVE200_DRM_H_
+
+/* Bits 2-31 are valid physical base addresses */
+#define TVE200_Y_FRAME_BASE_ADDR 0x00
+#define TVE200_U_FRAME_BASE_ADDR 0x04
+#define TVE200_V_FRAME_BASE_ADDR 0x08
+
+#define TVE200_INT_EN 0x0C
+#define TVE200_INT_CLR 0x10
+#define TVE200_INT_STAT 0x14
+#define TVE200_INT_BUS_ERR BIT(7)
+#define TVE200_INT_V_STATUS BIT(6) /* vertical blank */
+#define TVE200_INT_V_NEXT_FRAME BIT(5)
+#define TVE200_INT_U_NEXT_FRAME BIT(4)
+#define TVE200_INT_Y_NEXT_FRAME BIT(3)
+#define TVE200_INT_V_FIFO_UNDERRUN BIT(2)
+#define TVE200_INT_U_FIFO_UNDERRUN BIT(1)
+#define TVE200_INT_Y_FIFO_UNDERRUN BIT(0)
+#define TVE200_FIFO_UNDERRUNS (TVE200_INT_V_FIFO_UNDERRUN | \
+ TVE200_INT_U_FIFO_UNDERRUN | \
+ TVE200_INT_Y_FIFO_UNDERRUN)
+
+#define TVE200_CTRL 0x18
+#define TVE200_CTRL_YUV420 BIT(31)
+#define TVE200_CTRL_CSMODE BIT(30)
+#define TVE200_CTRL_NONINTERLACE BIT(28) /* 0 = non-interlace CCIR656 */
+#define TVE200_CTRL_TVCLKP BIT(27) /* Inverted clock phase */
+/* Bits 24..26 define the burst size after arbitration on the bus */
+#define TVE200_CTRL_BURST_4_WORDS (0 << 24)
+#define TVE200_CTRL_BURST_8_WORDS (1 << 24)
+#define TVE200_CTRL_BURST_16_WORDS (2 << 24)
+#define TVE200_CTRL_BURST_32_WORDS (3 << 24)
+#define TVE200_CTRL_BURST_64_WORDS (4 << 24)
+#define TVE200_CTRL_BURST_128_WORDS (5 << 24)
+#define TVE200_CTRL_BURST_256_WORDS (6 << 24)
+#define TVE200_CTRL_BURST_0_WORDS (7 << 24) /* ? */
+/*
+ * Bits 16..23 is the retry count*16 before issueing a new AHB transfer
+ * on the AHB bus.
+ */
+#define TVE200_CTRL_RETRYCNT_MASK GENMASK(23, 16)
+#define TVE200_CTRL_RETRYCNT_16 (1 << 16)
+#define TVE200_CTRL_BBBP BIT(15) /* 0 = little-endian */
+/* Bits 12..14 define the YCbCr ordering */
+#define TVE200_CTRL_YCBCRODR_CB0Y0CR0Y1 (0 << 12)
+#define TVE200_CTRL_YCBCRODR_Y0CB0Y1CR0 (1 << 12)
+#define TVE200_CTRL_YCBCRODR_CR0Y0CB0Y1 (2 << 12)
+#define TVE200_CTRL_YCBCRODR_Y1CB0Y0CR0 (3 << 12)
+#define TVE200_CTRL_YCBCRODR_CR0Y1CB0Y0 (4 << 12)
+#define TVE200_CTRL_YCBCRODR_Y1CR0Y0CB0 (5 << 12)
+#define TVE200_CTRL_YCBCRODR_CB0Y1CR0Y0 (6 << 12)
+#define TVE200_CTRL_YCBCRODR_Y0CR0Y1CB0 (7 << 12)
+/* Bits 10..11 define the input resolution (framebuffer size) */
+#define TVE200_CTRL_IPRESOL_CIF (0 << 10)
+#define TVE200_CTRL_IPRESOL_VGA (1 << 10)
+#define TVE200_CTRL_IPRESOL_D1 (2 << 10)
+#define TVE200_CTRL_NTSC BIT(9) /* 0 = PAL, 1 = NTSC */
+#define TVE200_CTRL_INTERLACE BIT(8) /* 1 = interlace, only for D1 */
+#define TVE200_IPDMOD_RGB555 (0 << 6) /* TVE200_CTRL_YUV420 = 0 */
+#define TVE200_IPDMOD_RGB565 (1 << 6)
+#define TVE200_IPDMOD_RGB888 (2 << 6)
+#define TVE200_IPDMOD_YUV420 (2 << 6) /* TVE200_CTRL_YUV420 = 1 */
+#define TVE200_IPDMOD_YUV422 (3 << 6)
+/* Bits 4 & 5 define when to fire the vblank IRQ */
+#define TVE200_VSTSTYPE_VSYNC (0 << 4) /* start of vsync */
+#define TVE200_VSTSTYPE_VBP (1 << 4) /* start of v back porch */
+#define TVE200_VSTSTYPE_VAI (2 << 4) /* start of v active image */
+#define TVE200_VSTSTYPE_VFP (3 << 4) /* start of v front porch */
+#define TVE200_VSTSTYPE_BITS (BIT(4) | BIT(5))
+#define TVE200_BGR BIT(1) /* 0 = RGB, 1 = BGR */
+#define TVE200_TVEEN BIT(0) /* Enable TVE block */
+
+#define TVE200_CTRL_2 0x1c
+#define TVE200_CTRL_3 0x20
+
+#define TVE200_CTRL_4 0x24
+#define TVE200_CTRL_4_RESET BIT(0) /* triggers reset of TVE200 */
+
+#include <drm/drm_gem.h>
+#include <drm/drm_simple_kms_helper.h>
+
+struct tve200_drm_connector {
+ struct drm_connector connector;
+ struct drm_panel *panel;
+};
+
+struct tve200_drm_dev_private {
+ struct drm_device *drm;
+
+ struct tve200_drm_connector connector;
+ struct drm_simple_display_pipe pipe;
+ struct drm_fbdev_cma *fbdev;
+
+ void *regs;
+ struct clk *pclk;
+ struct clk *clk;
+};
+
+#define to_tve200_connector(x) \
+ container_of(x, struct tve200_drm_connector, connector)
+
+int tve200_display_init(struct drm_device *dev);
+int tve200_enable_vblank(struct drm_device *drm, unsigned int crtc);
+void tve200_disable_vblank(struct drm_device *drm, unsigned int crtc);
+irqreturn_t tve200_irq(int irq, void *data);
+int tve200_connector_init(struct drm_device *dev);
+int tve200_encoder_init(struct drm_device *dev);
+int tve200_dumb_create(struct drm_file *file_priv,
+ struct drm_device *dev,
+ struct drm_mode_create_dumb *args);
+
+#endif /* _TVE200_DRM_H_ */
new file mode 100644
@@ -0,0 +1,278 @@
+/*
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ * Parts of this file were based on sources as follows:
+ *
+ * Copyright (C) 2006-2008 Intel Corporation
+ * Copyright (C) 2007 Amos Lee <amos_lee@storlinksemi.com>
+ * Copyright (C) 2007 Dave Airlie <airlied@linux.ie>
+ * Copyright (C) 2011 Texas Instruments
+ * Copyright (C) 2017 Eric Anholt
+ *
+ * This program is free software and is provided to you under the terms of the
+ * GNU General Public License version 2 as published by the Free Software
+ * Foundation, and any use by you of this program is subject to the terms of
+ * such GNU licence.
+ */
+
+/**
+ * DOC: Faraday TV Encoder TVE200 DRM Driver
+ *
+ * The Faraday TV Encoder TVE200 is also known as the Gemini TV Interface
+ * Controller (TVC) and is found in the Gemini Chipset from Storlink
+ * Semiconductor (later Storm Semiconductor, later Cortina Systems)
+ * but also in the Grain Media GM8180 chipset. On the Gemini the module
+ * is connected to 8 data lines and a single clock line, comprising an
+ * 8-bit BT.656 interface.
+ *
+ * This is a very basic YUV display driver. The datasheet specifies that
+ * it supports the ITU BT.656 standard. It requires a 27 MHz clock which is
+ * the hallmark of any TV encoder supporting both PAL and NTSC.
+ *
+ * This driver exposes a standard KMS interface for this TV encoder.
+ */
+
+#include <linux/clk.h>
+#include <linux/dma-buf.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/shmem_fs.h>
+#include <linux/slab.h>
+#include <linux/version.h>
+
+#include <drm/drmP.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_gem_cma_helper.h>
+#include <drm/drm_fb_cma_helper.h>
+#include <drm/drm_panel.h>
+
+#include "tve200_drm.h"
+
+#define DRIVER_DESC "DRM module for Faraday TVE200"
+
+static const struct drm_mode_config_funcs mode_config_funcs = {
+ .fb_create = drm_fb_cma_create,
+ .atomic_check = drm_atomic_helper_check,
+ .atomic_commit = drm_atomic_helper_commit,
+};
+
+static int tve200_modeset_init(struct drm_device *dev)
+{
+ struct drm_mode_config *mode_config;
+ struct tve200_drm_dev_private *priv = dev->dev_private;
+ int ret = 0;
+
+ drm_mode_config_init(dev);
+ mode_config = &dev->mode_config;
+ mode_config->funcs = &mode_config_funcs;
+ mode_config->min_width = 352;
+ mode_config->max_width = 720;
+ mode_config->min_height = 240;
+ mode_config->max_height = 576;
+
+ ret = tve200_connector_init(dev);
+ if (ret) {
+ dev_err(dev->dev, "Failed to create tve200_drm_connector\n");
+ goto out_config;
+ }
+
+ /*
+ * Don't actually attach if we didn't find a drm_panel
+ * attached to us.
+ */
+ if (!priv->connector.panel) {
+ dev_info(dev->dev,
+ "deferring due to lack of DRM panel device\n");
+ ret = -EPROBE_DEFER;
+ goto out_config;
+ }
+ dev_info(dev->dev, "attached to panel %s\n",
+ dev_name(priv->connector.panel->dev));
+
+ ret = tve200_display_init(dev);
+ if (ret) {
+ dev_err(dev->dev, "failed to init display\n");
+ goto out_config;
+ }
+
+ ret = drm_vblank_init(dev, 1);
+ if (ret) {
+ dev_err(dev->dev, "failed to init vblank\n");
+ goto out_config;
+ }
+
+ drm_mode_config_reset(dev);
+
+ /*
+ * Passing in 16 here will make the RGB656 mode the default
+ * Passing in 32 will use XRGB8888 mode
+ */
+ priv->fbdev = drm_fbdev_cma_init(dev, 16,
+ dev->mode_config.num_connector);
+ drm_kms_helper_poll_init(dev);
+
+ goto finish;
+
+out_config:
+ drm_mode_config_cleanup(dev);
+finish:
+ return ret;
+}
+
+DEFINE_DRM_GEM_CMA_FOPS(drm_fops);
+
+static void tve200_lastclose(struct drm_device *dev)
+{
+ struct tve200_drm_dev_private *priv = dev->dev_private;
+
+ drm_fbdev_cma_restore_mode(priv->fbdev);
+}
+
+static struct drm_driver tve200_drm_driver = {
+ .driver_features =
+ DRIVER_MODESET | DRIVER_GEM | DRIVER_PRIME | DRIVER_ATOMIC,
+ .lastclose = tve200_lastclose,
+ .ioctls = NULL,
+ .fops = &drm_fops,
+ .name = "tve200",
+ .desc = DRIVER_DESC,
+ .date = "20170703",
+ .major = 1,
+ .minor = 0,
+ .patchlevel = 0,
+ .dumb_create = drm_gem_cma_dumb_create,
+ .gem_free_object_unlocked = drm_gem_cma_free_object,
+ .gem_vm_ops = &drm_gem_cma_vm_ops,
+
+ .enable_vblank = tve200_enable_vblank,
+ .disable_vblank = tve200_disable_vblank,
+
+ .prime_handle_to_fd = drm_gem_prime_handle_to_fd,
+ .prime_fd_to_handle = drm_gem_prime_fd_to_handle,
+ .gem_prime_import = drm_gem_prime_import,
+ .gem_prime_export = drm_gem_prime_export,
+ .gem_prime_get_sg_table = drm_gem_cma_prime_get_sg_table,
+ .gem_prime_import_sg_table = drm_gem_cma_prime_import_sg_table,
+ .gem_prime_vmap = drm_gem_cma_prime_vmap,
+ .gem_prime_vunmap = drm_gem_cma_prime_vunmap,
+ .gem_prime_mmap = drm_gem_cma_prime_mmap,
+};
+
+static int tve200_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct tve200_drm_dev_private *priv;
+ struct drm_device *drm;
+ struct resource *res;
+ int irq;
+ int ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ drm = drm_dev_alloc(&tve200_drm_driver, dev);
+ if (IS_ERR(drm))
+ return PTR_ERR(drm);
+ platform_set_drvdata(pdev, drm);
+ priv->drm = drm;
+ drm->dev_private = priv;
+
+ /* Clock the silicon so we can access the registers */
+ priv->pclk = devm_clk_get(dev, "PCLK");
+ if (IS_ERR(priv->pclk)) {
+ dev_err(dev, "unable to get PCLK\n");
+ ret = PTR_ERR(priv->pclk);
+ goto dev_unref;
+ }
+ ret = clk_prepare_enable(priv->pclk);
+ if (ret) {
+ dev_err(dev, "failed to enable PCLK\n");
+ goto dev_unref;
+ }
+
+ /* This clock is for the pixels (27MHz) */
+ priv->clk = devm_clk_get(dev, "TVE");
+ if (IS_ERR(priv->clk)) {
+ dev_err(dev, "unable to get TVE clock\n");
+ ret = PTR_ERR(priv->clk);
+ goto clk_disable;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ priv->regs = devm_ioremap_resource(dev, res);
+ if (!priv->regs) {
+ dev_err(dev, "%s failed mmio\n", __func__);
+ ret = -EINVAL;
+ goto clk_disable;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (!irq) {
+ ret = -EINVAL;
+ goto clk_disable;
+ }
+
+ /* turn off interrupts before requesting the irq */
+ writel(0, priv->regs + TVE200_INT_EN);
+
+ ret = devm_request_irq(dev, irq, tve200_irq, 0, "tve200", priv);
+ if (ret) {
+ dev_err(dev, "failed to request irq %d\n", ret);
+ goto clk_disable;
+ }
+
+ ret = tve200_modeset_init(drm);
+ if (ret)
+ goto clk_disable;
+
+ ret = drm_dev_register(drm, 0);
+ if (ret < 0)
+ goto clk_disable;
+
+ return 0;
+
+clk_disable:
+ clk_disable_unprepare(priv->pclk);
+dev_unref:
+ drm_dev_unref(drm);
+ return ret;
+}
+
+static int tve200_remove(struct platform_device *pdev)
+{
+ struct drm_device *drm = platform_get_drvdata(pdev);
+ struct tve200_drm_dev_private *priv = drm->dev_private;
+
+ drm_dev_unregister(drm);
+ if (priv->fbdev)
+ drm_fbdev_cma_fini(priv->fbdev);
+ drm_mode_config_cleanup(drm);
+ clk_disable_unprepare(priv->pclk);
+ drm_dev_unref(drm);
+
+ return 0;
+}
+
+static const struct of_device_id tve200_of_match[] = {
+ {
+ .compatible = "faraday,tve200",
+ },
+ {},
+};
+
+static struct platform_driver tve200_driver = {
+ .driver = {
+ .name = "tve200",
+ .of_match_table = of_match_ptr(tve200_of_match),
+ },
+ .probe = tve200_probe,
+ .remove = tve200_remove,
+};
+module_platform_driver(tve200_driver);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
+MODULE_LICENSE("GPL");