Message ID | 20170911122952.33980-3-hverkuil@xs4all.nl (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Mon, Sep 11, 2017 at 02:29:50PM +0200, Hans Verkuil wrote: > From: Hans Verkuil <hans.verkuil@cisco.com> > > Add support for the Tegra CEC IP to tegra124.dtsi and enable it on the > Jetson TK1. > > Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> > --- > arch/arm/boot/dts/tegra124-jetson-tk1.dts | 4 ++++ > arch/arm/boot/dts/tegra124.dtsi | 12 +++++++++++- > 2 files changed, 15 insertions(+), 1 deletion(-) I prefer SoC and board changes to be split into separate patches. I've done that with this patch while applying. Thanks, Thierry
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index 7bacb2954f58..7f56de6890c3 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -67,6 +67,10 @@ }; }; + cec@70015000 { + status = "okay"; + }; + gpu@0,57000000 { /* * Node left disabled on purpose - the bootloader will enable diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 1b10b14a6abd..1a21e527fb6e 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -123,7 +123,7 @@ nvidia,head = <1>; }; - hdmi@54280000 { + hdmi: hdmi@54280000 { compatible = "nvidia,tegra124-hdmi"; reg = <0x0 0x54280000 0x0 0x00040000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; @@ -851,6 +851,16 @@ status = "disabled"; }; + cec@70015000 { + compatible = "nvidia,tegra124-cec"; + reg = <0x0 0x70015000 0x0 0x00001000>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_CEC>; + clock-names = "cec"; + hdmi-phandle = <&hdmi>; + status = "disabled"; + }; + soctherm: thermal-sensor@700e2000 { compatible = "nvidia,tegra124-soctherm"; reg = <0x0 0x700e2000 0x0 0x600 /* SOC_THERM reg_base */