diff mbox

[4.4,23/31] drm/bridge: adv7511: Use work_struct to defer hotplug handing to out of irq context

Message ID 20170912165248.541459149@linuxfoundation.org (mailing list archive)
State New, archived
Headers show

Commit Message

Greg KH Sept. 12, 2017, 4:56 p.m. UTC 
4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: John Stultz <john.stultz@linaro.org>

commit 518cb7057a59b9441336d2e88a396d52b6ab0cce upstream.

I was recently seeing issues with EDID probing, where
the logic to wait for the EDID read bit to be set by the
IRQ wasn't happening and the code would time out and fail.

Digging deeper, I found this was due to the fact that
IRQs were disabled as we were running in IRQ context from
the HPD signal.

Thus this patch changes the logic to handle the HPD signal
via a work_struct so we can be out of irq context.

With this patch, the EDID probing on hotplug does not time
out.

Cc: David Airlie <airlied@linux.ie>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-2-git-send-email-john.stultz@linaro.org
Signed-off-by: Thong Ho <thong.ho.px@rvc.renesas.com>
Signed-off-by: Nhan Nguyen <nhan.nguyen.yb@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/i2c/adv7511.c |   14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

Comments

Ben Hutchings Oct. 13, 2017, 1:53 p.m. UTC | #1 
On Tue, 2017-09-12 at 09:56 -0700, Greg Kroah-Hartman wrote:
> 4.4-stable review patch.  If anyone has any objections, please let me
> know.
> 
> ------------------
> 
> From: John Stultz <john.stultz@linaro.org>
> 
> commit 518cb7057a59b9441336d2e88a396d52b6ab0cce upstream.
> 
> I was recently seeing issues with EDID probing, where
> the logic to wait for the EDID read bit to be set by the
> IRQ wasn't happening and the code would time out and fail.
> 
> Digging deeper, I found this was due to the fact that
> IRQs were disabled as we were running in IRQ context from
> the HPD signal.
> 
> Thus this patch changes the logic to handle the HPD signal
> via a work_struct so we can be out of irq context.
[...]

Shouldn't there also be a cancel_work_sync() in the remove function?

Ben.
diff mbox

Patch

--- a/drivers/gpu/drm/i2c/adv7511.c
+++ b/drivers/gpu/drm/i2c/adv7511.c
@@ -36,7 +36,10 @@  struct adv7511 {
 	bool edid_read;
 
 	wait_queue_head_t wq;
+	struct work_struct hpd_work;
+
 	struct drm_encoder *encoder;
+	struct drm_connector connector;
 
 	bool embedded_sync;
 	enum adv7511_sync_polarity vsync_polarity;
@@ -429,6 +432,13 @@  static bool adv7511_hpd(struct adv7511 *
 	return false;
 }
 
+static void adv7511_hpd_work(struct work_struct *work)
+{
+	struct adv7511 *adv7511 = container_of(work, struct adv7511, hpd_work);
+
+	drm_helper_hpd_irq_event(adv7511->connector.dev);
+}
+
 static int adv7511_irq_process(struct adv7511 *adv7511, bool process_hpd)
 {
 	unsigned int irq0, irq1;
@@ -446,7 +456,7 @@  static int adv7511_irq_process(struct ad
 	regmap_write(adv7511->regmap, ADV7511_REG_INT(1), irq1);
 
 	if (process_hpd && irq0 & ADV7511_INT0_HDP && adv7511->encoder)
-		drm_helper_hpd_irq_event(adv7511->encoder->dev);
+		schedule_work(&adv7511->hpd_work);
 
 	if (irq0 & ADV7511_INT0_EDID_READY || irq1 & ADV7511_INT1_DDC_ERROR) {
 		adv7511->edid_read = true;
@@ -922,6 +932,8 @@  static int adv7511_probe(struct i2c_clie
 	if (!adv7511->i2c_edid)
 		return -ENOMEM;
 
+	INIT_WORK(&adv7511->hpd_work, adv7511_hpd_work);
+
 	if (i2c->irq) {
 		init_waitqueue_head(&adv7511->wq);