[v2,1/6] drm: Add drm_mode_config->normalize_zpos boolean

Commit Message

Peter Ujfalusi Jan. 12, 2018, 1:21 p.m. UTC

Instead of drivers duplicating the drm_atomic_helper_check() code to be
able to normalize the zpos they can use the normalize_zpos flag to let the
drm core to do it.

Signed-off-by: Peter Ujfalusi <[e-mail]>
---
 drivers/gpu/drm/drm_atomic_helper.c | 11 +++++++++++
 include/drm/drm_mode_config.h       |  8 ++++++++
 include/drm/drm_plane.h             |  4 ++--
 3 files changed, 21 insertions(+), 2 deletions(-)

Patch

diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
index ab4032167094..0f6a4949e6dc 100644
--- a/drivers/gpu/drm/drm_atomic_helper.c
+++ b/drivers/gpu/drm/drm_atomic_helper.c
@@ -873,6 +873,11 @@  EXPORT_SYMBOL(drm_atomic_helper_check_planes);
  * functions depend upon an updated adjusted_mode.clock to e.g. properly compute
  * watermarks.
  *
+ * Note that zpos normalization will add all enable planes to the state which
+ * might not desired for some drivers.
+ * For example enable/disable of a cursor plane which have fixed zpos value
+ * would trigger all other enabled planes to be forced to the state change.
+ *
  * RETURNS:
  * Zero for success or -errno
  */
@@ -885,6 +890,12 @@  int drm_atomic_helper_check(struct drm_device *dev,
 	if (ret)
 		return ret;
 
+	if (dev->mode_config.normalize_zpos) {
+		ret = drm_atomic_normalize_zpos(dev, state);
+		if (ret)
+			return ret;
+	}
+
 	ret = drm_atomic_helper_check_planes(dev, state);
 	if (ret)
 		return ret;
diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
index 2cb6f02df64a..987ab63ae037 100644
--- a/include/drm/drm_mode_config.h
+++ b/include/drm/drm_mode_config.h
@@ -792,6 +792,14 @@  struct drm_mode_config {
 	/* cursor size */
 	uint32_t cursor_width, cursor_height;
 
+	/**
+	 * @normalize_zpos:
+	 *
+	 * If true the drm core will call drm_atomic_normalize_zpos() as part of
+	 * atomic mode checking from drm_atomic_helper_check()
+	 */
+	bool normalize_zpos;
+
 	/**
 	 * @suspend_state:
 	 *
diff --git a/include/drm/drm_plane.h b/include/drm/drm_plane.h
index 8185e3468a23..2c0adb124e0f 100644
--- a/include/drm/drm_plane.h
+++ b/include/drm/drm_plane.h
@@ -50,8 +50,8 @@  struct drm_modeset_acquire_ctx;
  *	plane with a lower ID.
  * @normalized_zpos: normalized value of zpos: unique, range from 0 to N-1
  *	where N is the number of active planes for given crtc. Note that
- *	the driver must call drm_atomic_normalize_zpos() to update this before
- *	it can be trusted.
+ *	the driver must set drm_mode_config.normalize_zpos or call
+ *	drm_atomic_normalize_zpos() to update this before it can be trusted.
  * @src: clipped source coordinates of the plane (in 16.16)
  * @dst: clipped destination coordinates of the plane
  * @state: backpointer to global drm_atomic_state