diff --git a/drivers/gpu/drm/rcar-du/Kconfig b/drivers/gpu/drm/rcar-du/Kconfig
index 3f83352a7313..edde8d4b87a3 100644
--- a/drivers/gpu/drm/rcar-du/Kconfig
+++ b/drivers/gpu/drm/rcar-du/Kconfig
@@ -19,8 +19,8 @@ config DRM_RCAR_DW_HDMI
 	  Enable support for R-Car Gen3 internal HDMI encoder.
 
 config DRM_RCAR_LVDS
-	bool "R-Car DU LVDS Encoder Support"
-	depends on DRM_RCAR_DU
+	tristate "R-Car DU LVDS Encoder Support"
+	depends on DRM && DRM_BRIDGE && OF
 	select DRM_PANEL
 	select OF_FLATTREE
 	select OF_OVERLAY
diff --git a/drivers/gpu/drm/rcar-du/Makefile b/drivers/gpu/drm/rcar-du/Makefile
index 8ed569a0f462..247df6a3c81d 100644
--- a/drivers/gpu/drm/rcar-du/Makefile
+++ b/drivers/gpu/drm/rcar-du/Makefile
@@ -4,13 +4,12 @@ rcar-du-drm-y := rcar_du_crtc.o \
 		 rcar_du_encoder.o \
 		 rcar_du_group.o \
 		 rcar_du_kms.o \
-		 rcar_du_lvdscon.o \
 		 rcar_du_of.o \
 		 rcar_du_plane.o
 
-rcar-du-drm-$(CONFIG_DRM_RCAR_LVDS)	+= rcar_du_lvdsenc.o
 rcar-du-drm-$(CONFIG_DRM_RCAR_LVDS)	+= rcar_du_of_lvds.dtb.o
 rcar-du-drm-$(CONFIG_DRM_RCAR_VSP)	+= rcar_du_vsp.o
 
 obj-$(CONFIG_DRM_RCAR_DU)		+= rcar-du-drm.o
 obj-$(CONFIG_DRM_RCAR_DW_HDMI)		+= rcar_dw_hdmi.o
+obj-$(CONFIG_DRM_RCAR_LVDS)		+= rcar_lvds.o
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
index 6e02c762a557..06a3fbdd728a 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
@@ -29,6 +29,7 @@
 
 #include "rcar_du_drv.h"
 #include "rcar_du_kms.h"
+#include "rcar_du_of.h"
 #include "rcar_du_regs.h"
 
 /* -----------------------------------------------------------------------------
@@ -74,7 +75,6 @@ static const struct rcar_du_device_info rzg1_du_r8a7745_info = {
 			.port = 1,
 		},
 	},
-	.num_lvds = 0,
 };
 
 static const struct rcar_du_device_info rcar_du_r8a7779_info = {
@@ -95,14 +95,13 @@ static const struct rcar_du_device_info rcar_du_r8a7779_info = {
 			.port = 1,
 		},
 	},
-	.num_lvds = 0,
 };
 
 static const struct rcar_du_device_info rcar_du_r8a7790_info = {
 	.gen = 2,
 	.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK
 		  | RCAR_DU_FEATURE_EXT_CTRL_REGS,
-	.quirks = RCAR_DU_QUIRK_ALIGN_128B | RCAR_DU_QUIRK_LVDS_LANES,
+	.quirks = RCAR_DU_QUIRK_ALIGN_128B,
 	.num_crtcs = 3,
 	.routes = {
 		/*
@@ -164,7 +163,6 @@ static const struct rcar_du_device_info rcar_du_r8a7792_info = {
 			.port = 1,
 		},
 	},
-	.num_lvds = 0,
 };
 
 static const struct rcar_du_device_info rcar_du_r8a7794_info = {
@@ -186,7 +184,6 @@ static const struct rcar_du_device_info rcar_du_r8a7794_info = {
 			.port = 1,
 		},
 	},
-	.num_lvds = 0,
 };
 
 static const struct rcar_du_device_info rcar_du_r8a7795_info = {
@@ -434,7 +431,19 @@ static struct platform_driver rcar_du_platform_driver = {
 	},
 };
 
-module_platform_driver(rcar_du_platform_driver);
+static int __init rcar_du_init(void)
+{
+	rcar_du_of_init(rcar_du_of_table);
+
+	return platform_driver_register(&rcar_du_platform_driver);
+}
+module_init(rcar_du_init);
+
+static void __exit rcar_du_exit(void)
+{
+	platform_driver_unregister(&rcar_du_platform_driver);
+}
+module_exit(rcar_du_exit);
 
 MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>");
 MODULE_DESCRIPTION("Renesas R-Car Display Unit DRM Driver");
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.h b/drivers/gpu/drm/rcar-du/rcar_du_drv.h
index f400fde65a0c..5c7ec15818c7 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_drv.h
+++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.h
@@ -26,14 +26,12 @@ struct device;
 struct drm_device;
 struct drm_fbdev_cma;
 struct rcar_du_device;
-struct rcar_du_lvdsenc;
 
 #define RCAR_DU_FEATURE_CRTC_IRQ_CLOCK	(1 << 0)	/* Per-CRTC IRQ and clock */
 #define RCAR_DU_FEATURE_EXT_CTRL_REGS	(1 << 1)	/* Has extended control registers */
 #define RCAR_DU_FEATURE_VSP1_SOURCE	(1 << 2)	/* Has inputs from VSP1 */
 
 #define RCAR_DU_QUIRK_ALIGN_128B	(1 << 0)	/* Align pitches to 128 bytes */
-#define RCAR_DU_QUIRK_LVDS_LANES	(1 << 1)	/* LVDS lanes 1 and 3 inverted */
 
 /*
  * struct rcar_du_output_routing - Output routing specification
@@ -70,7 +68,6 @@ struct rcar_du_device_info {
 
 #define RCAR_DU_MAX_CRTCS		4
 #define RCAR_DU_MAX_GROUPS		DIV_ROUND_UP(RCAR_DU_MAX_CRTCS, 2)
-#define RCAR_DU_MAX_LVDS		2
 #define RCAR_DU_MAX_VSPS		4
 
 struct rcar_du_device {
@@ -96,8 +93,6 @@ struct rcar_du_device {
 
 	unsigned int dpad0_source;
 	unsigned int vspd1_sink;
-
-	struct rcar_du_lvdsenc *lvds[RCAR_DU_MAX_LVDS];
 };
 
 static inline bool rcar_du_has(struct rcar_du_device *rcdu,
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_encoder.c b/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
index ba8d2804c1d1..f9c933d3bae6 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
@@ -21,134 +21,22 @@
 #include "rcar_du_drv.h"
 #include "rcar_du_encoder.h"
 #include "rcar_du_kms.h"
-#include "rcar_du_lvdscon.h"
-#include "rcar_du_lvdsenc.h"
 
 /* -----------------------------------------------------------------------------
  * Encoder
  */
 
-static void rcar_du_encoder_disable(struct drm_encoder *encoder)
-{
-	struct rcar_du_encoder *renc = to_rcar_encoder(encoder);
-
-	if (renc->connector && renc->connector->panel) {
-		drm_panel_disable(renc->connector->panel);
-		drm_panel_unprepare(renc->connector->panel);
-	}
-
-	if (renc->lvds)
-		rcar_du_lvdsenc_enable(renc->lvds, encoder->crtc, false);
-}
-
-static void rcar_du_encoder_enable(struct drm_encoder *encoder)
-{
-	struct rcar_du_encoder *renc = to_rcar_encoder(encoder);
-
-	if (renc->lvds)
-		rcar_du_lvdsenc_enable(renc->lvds, encoder->crtc, true);
-
-	if (renc->connector && renc->connector->panel) {
-		drm_panel_prepare(renc->connector->panel);
-		drm_panel_enable(renc->connector->panel);
-	}
-}
-
-static int rcar_du_encoder_atomic_check(struct drm_encoder *encoder,
-					struct drm_crtc_state *crtc_state,
-					struct drm_connector_state *conn_state)
-{
-	struct rcar_du_encoder *renc = to_rcar_encoder(encoder);
-	struct drm_display_mode *adjusted_mode = &crtc_state->adjusted_mode;
-	const struct drm_display_mode *mode = &crtc_state->mode;
-	struct drm_connector *connector = conn_state->connector;
-	struct drm_device *dev = encoder->dev;
-
-	/*
-	 * Only panel-related encoder types require validation here, everything
-	 * else is handled by the bridge drivers.
-	 */
-	if (connector->connector_type == DRM_MODE_CONNECTOR_LVDS) {
-		const struct drm_display_mode *panel_mode;
-
-		if (list_empty(&connector->modes)) {
-			dev_dbg(dev->dev, "encoder: empty modes list\n");
-			return -EINVAL;
-		}
-
-		panel_mode = list_first_entry(&connector->modes,
-					      struct drm_display_mode, head);
-
-		/* We're not allowed to modify the resolution. */
-		if (mode->hdisplay != panel_mode->hdisplay ||
-		    mode->vdisplay != panel_mode->vdisplay)
-			return -EINVAL;
-
-		/*
-		 * The flat panel mode is fixed, just copy it to the adjusted
-		 * mode.
-		 */
-		drm_mode_copy(adjusted_mode, panel_mode);
-	}
-
-	if (renc->lvds)
-		rcar_du_lvdsenc_atomic_check(renc->lvds, adjusted_mode);
-
-	return 0;
-}
-
 static void rcar_du_encoder_mode_set(struct drm_encoder *encoder,
 				     struct drm_crtc_state *crtc_state,
 				     struct drm_connector_state *conn_state)
 {
 	struct rcar_du_encoder *renc = to_rcar_encoder(encoder);
-	struct drm_display_info *info = &conn_state->connector->display_info;
-	enum rcar_lvds_mode mode;
 
 	rcar_du_crtc_route_output(crtc_state->crtc, renc->output);
-
-	if (!renc->lvds) {
-		/*
-		 * The DU driver creates connectors only for the outputs of the
-		 * internal LVDS encoders.
-		 */
-		renc->connector = NULL;
-		return;
-	}
-
-	renc->connector = to_rcar_connector(conn_state->connector);
-
-	if (!info->num_bus_formats || !info->bus_formats) {
-		dev_err(encoder->dev->dev, "no LVDS bus format reported\n");
-		return;
-	}
-
-	switch (info->bus_formats[0]) {
-	case MEDIA_BUS_FMT_RGB666_1X7X3_SPWG:
-	case MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA:
-		mode = RCAR_LVDS_MODE_JEIDA;
-		break;
-	case MEDIA_BUS_FMT_RGB888_1X7X4_SPWG:
-		mode = RCAR_LVDS_MODE_VESA;
-		break;
-	default:
-		dev_err(encoder->dev->dev,
-			"unsupported LVDS bus format 0x%04x\n",
-			info->bus_formats[0]);
-		return;
-	}
-
-	if (info->bus_flags & DRM_BUS_FLAG_DATA_LSB_TO_MSB)
-		mode |= RCAR_LVDS_MODE_MIRROR;
-
-	rcar_du_lvdsenc_set_mode(renc->lvds, mode);
 }
 
 static const struct drm_encoder_helper_funcs encoder_helper_funcs = {
 	.atomic_mode_set = rcar_du_encoder_mode_set,
-	.disable = rcar_du_encoder_disable,
-	.enable = rcar_du_encoder_enable,
-	.atomic_check = rcar_du_encoder_atomic_check,
 };
 
 static const struct drm_encoder_funcs encoder_funcs = {
@@ -172,33 +60,14 @@ int rcar_du_encoder_init(struct rcar_du_device *rcdu,
 	renc->output = output;
 	encoder = rcar_encoder_to_drm_encoder(renc);
 
-	switch (output) {
-	case RCAR_DU_OUTPUT_LVDS0:
-		renc->lvds = rcdu->lvds[0];
-		break;
+	dev_dbg(rcdu->dev, "initializing encoder %pOF for output %u\n",
+		enc_node, output);
 
-	case RCAR_DU_OUTPUT_LVDS1:
-		renc->lvds = rcdu->lvds[1];
-		break;
-
-	default:
-		break;
-	}
-
-	if (enc_node) {
-		dev_dbg(rcdu->dev, "initializing encoder %pOF for output %u\n",
-			enc_node, output);
-
-		/* Locate the DRM bridge from the encoder DT node. */
-		bridge = of_drm_find_bridge(enc_node);
-		if (!bridge) {
-			ret = -EPROBE_DEFER;
-			goto done;
-		}
-	} else {
-		dev_dbg(rcdu->dev,
-			"initializing internal encoder for output %u\n",
-			output);
+	/* Locate the DRM bridge from the encoder DT node. */
+	bridge = of_drm_find_bridge(enc_node);
+	if (!bridge) {
+		ret = -EPROBE_DEFER;
+		goto done;
 	}
 
 	ret = drm_encoder_init(rcdu->ddev, encoder, &encoder_funcs,
@@ -208,28 +77,14 @@ int rcar_du_encoder_init(struct rcar_du_device *rcdu,
 
 	drm_encoder_helper_add(encoder, &encoder_helper_funcs);
 
-	if (bridge) {
-		/*
-		 * Attach the bridge to the encoder. The bridge will create the
-		 * connector.
-		 */
-		ret = drm_bridge_attach(encoder, bridge, NULL);
-		if (ret) {
-			drm_encoder_cleanup(encoder);
-			return ret;
-		}
-	} else {
-		/* There's no bridge, create the connector manually. */
-		switch (output) {
-		case RCAR_DU_OUTPUT_LVDS0:
-		case RCAR_DU_OUTPUT_LVDS1:
-			ret = rcar_du_lvds_connector_init(rcdu, renc, con_node);
-			break;
-
-		default:
-			ret = -EINVAL;
-			break;
-		}
+	/*
+	 * Attach the bridge to the encoder. The bridge will create the
+	 * connector.
+	 */
+	ret = drm_bridge_attach(encoder, bridge, NULL);
+	if (ret) {
+		drm_encoder_cleanup(encoder);
+		return ret;
 	}
 
 done:
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_encoder.h b/drivers/gpu/drm/rcar-du/rcar_du_encoder.h
index 5422fa4df272..2d2abcacd169 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_encoder.h
+++ b/drivers/gpu/drm/rcar-du/rcar_du_encoder.h
@@ -19,13 +19,10 @@
 
 struct drm_panel;
 struct rcar_du_device;
-struct rcar_du_lvdsenc;
 
 struct rcar_du_encoder {
 	struct drm_encoder base;
 	enum rcar_du_output output;
-	struct rcar_du_connector *connector;
-	struct rcar_du_lvdsenc *lvds;
 };
 
 #define to_rcar_encoder(e) \
@@ -33,15 +30,6 @@ struct rcar_du_encoder {
 
 #define rcar_encoder_to_drm_encoder(e)	(&(e)->base)
 
-struct rcar_du_connector {
-	struct drm_connector connector;
-	struct rcar_du_encoder *encoder;
-	struct drm_panel *panel;
-};
-
-#define to_rcar_connector(c) \
-	container_of(c, struct rcar_du_connector, connector)
-
 int rcar_du_encoder_init(struct rcar_du_device *rcdu,
 			 enum rcar_du_output output,
 			 struct device_node *enc_node,
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_kms.c b/drivers/gpu/drm/rcar-du/rcar_du_kms.c
index 566d1a948c8f..0329b354bfa0 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_kms.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_kms.c
@@ -27,7 +27,6 @@
 #include "rcar_du_drv.h"
 #include "rcar_du_encoder.h"
 #include "rcar_du_kms.h"
-#include "rcar_du_lvdsenc.h"
 #include "rcar_du_regs.h"
 #include "rcar_du_vsp.h"
 
@@ -341,11 +340,10 @@ static int rcar_du_encoders_init_one(struct rcar_du_device *rcdu,
 	of_node_put(entity_ep_node);
 
 	if (!encoder) {
-		/*
-		 * If no encoder has been found the entity must be the
-		 * connector.
-		 */
-		connector = entity;
+		dev_warn(rcdu->dev,
+			 "no encoder found for endpoint %pOF, skipping\n",
+			 ep->local_node);
+		return -ENODEV;
 	}
 
 	ret = rcar_du_encoder_init(rcdu, output, encoder, connector);
@@ -595,10 +593,6 @@ int rcar_du_modeset_init(struct rcar_du_device *rcdu)
 	}
 
 	/* Initialize the encoders. */
-	ret = rcar_du_lvdsenc_init(rcdu);
-	if (ret < 0)
-		return ret;
-
 	ret = rcar_du_encoders_init(rcdu);
 	if (ret < 0)
 		return ret;
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_lvdscon.c b/drivers/gpu/drm/rcar-du/rcar_du_lvdscon.c
deleted file mode 100644
index e96f2df0c305..000000000000
--- a/drivers/gpu/drm/rcar-du/rcar_du_lvdscon.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * rcar_du_lvdscon.c  --  R-Car Display Unit LVDS Connector
- *
- * Copyright (C) 2013-2014 Renesas Electronics Corporation
- *
- * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <drm/drmP.h>
-#include <drm/drm_atomic_helper.h>
-#include <drm/drm_crtc.h>
-#include <drm/drm_crtc_helper.h>
-#include <drm/drm_panel.h>
-
-#include <video/display_timing.h>
-#include <video/of_display_timing.h>
-#include <video/videomode.h>
-
-#include "rcar_du_drv.h"
-#include "rcar_du_encoder.h"
-#include "rcar_du_kms.h"
-#include "rcar_du_lvdscon.h"
-
-static int rcar_du_lvds_connector_get_modes(struct drm_connector *connector)
-{
-	struct rcar_du_connector *rcon = to_rcar_connector(connector);
-
-	return drm_panel_get_modes(rcon->panel);
-}
-
-static const struct drm_connector_helper_funcs connector_helper_funcs = {
-	.get_modes = rcar_du_lvds_connector_get_modes,
-};
-
-static void rcar_du_lvds_connector_destroy(struct drm_connector *connector)
-{
-	struct rcar_du_connector *rcon = to_rcar_connector(connector);
-
-	drm_panel_detach(rcon->panel);
-	drm_connector_cleanup(connector);
-}
-
-static const struct drm_connector_funcs connector_funcs = {
-	.reset = drm_atomic_helper_connector_reset,
-	.fill_modes = drm_helper_probe_single_connector_modes,
-	.destroy = rcar_du_lvds_connector_destroy,
-	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
-	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
-};
-
-int rcar_du_lvds_connector_init(struct rcar_du_device *rcdu,
-				struct rcar_du_encoder *renc,
-				const struct device_node *np)
-{
-	struct drm_encoder *encoder = rcar_encoder_to_drm_encoder(renc);
-	struct rcar_du_connector *rcon;
-	struct drm_connector *connector;
-	int ret;
-
-	rcon = devm_kzalloc(rcdu->dev, sizeof(*rcon), GFP_KERNEL);
-	if (rcon == NULL)
-		return -ENOMEM;
-
-	connector = &rcon->connector;
-
-	rcon->panel = of_drm_find_panel(np);
-	if (!rcon->panel)
-		return -EPROBE_DEFER;
-
-	ret = drm_connector_init(rcdu->ddev, connector, &connector_funcs,
-				 DRM_MODE_CONNECTOR_LVDS);
-	if (ret < 0)
-		return ret;
-
-	drm_connector_helper_add(connector, &connector_helper_funcs);
-
-	ret = drm_mode_connector_attach_encoder(connector, encoder);
-	if (ret < 0)
-		return ret;
-
-	ret = drm_panel_attach(rcon->panel, connector);
-	if (ret < 0)
-		return ret;
-
-	rcon->encoder = renc;
-
-	return 0;
-}
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_lvdscon.h b/drivers/gpu/drm/rcar-du/rcar_du_lvdscon.h
deleted file mode 100644
index 639071dd235c..000000000000
--- a/drivers/gpu/drm/rcar-du/rcar_du_lvdscon.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * rcar_du_lvdscon.h  --  R-Car Display Unit LVDS Connector
- *
- * Copyright (C) 2013-2014 Renesas Electronics Corporation
- *
- * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __RCAR_DU_LVDSCON_H__
-#define __RCAR_DU_LVDSCON_H__
-
-struct rcar_du_device;
-struct rcar_du_encoder;
-
-int rcar_du_lvds_connector_init(struct rcar_du_device *rcdu,
-				struct rcar_du_encoder *renc,
-				const struct device_node *np);
-
-#endif /* __RCAR_DU_LVDSCON_H__ */
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c b/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c
deleted file mode 100644
index b37c255c3d93..000000000000
--- a/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c
+++ /dev/null
@@ -1,264 +0,0 @@
-/*
- * rcar_du_lvdsenc.c  --  R-Car Display Unit LVDS Encoder
- *
- * Copyright (C) 2013-2014 Renesas Electronics Corporation
- *
- * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-#include "rcar_du_drv.h"
-#include "rcar_du_encoder.h"
-#include "rcar_du_lvdsenc.h"
-#include "rcar_lvds_regs.h"
-
-struct rcar_du_lvdsenc {
-	struct rcar_du_device *dev;
-
-	unsigned int index;
-	void __iomem *mmio;
-	struct clk *clock;
-	bool enabled;
-
-	enum rcar_lvds_input input;
-	enum rcar_lvds_mode mode;
-};
-
-static void rcar_lvds_write(struct rcar_du_lvdsenc *lvds, u32 reg, u32 data)
-{
-	iowrite32(data, lvds->mmio + reg);
-}
-
-static void rcar_du_lvdsenc_start_gen2(struct rcar_du_lvdsenc *lvds,
-				       struct rcar_du_crtc *rcrtc)
-{
-	const struct drm_display_mode *mode = &rcrtc->crtc.mode;
-	unsigned int freq = mode->clock;
-	u32 lvdcr0;
-	u32 pllcr;
-
-	/* PLL clock configuration */
-	if (freq < 39000)
-		pllcr = LVDPLLCR_CEEN | LVDPLLCR_COSEL | LVDPLLCR_PLLDLYCNT_38M;
-	else if (freq < 61000)
-		pllcr = LVDPLLCR_CEEN | LVDPLLCR_COSEL | LVDPLLCR_PLLDLYCNT_60M;
-	else if (freq < 121000)
-		pllcr = LVDPLLCR_CEEN | LVDPLLCR_COSEL | LVDPLLCR_PLLDLYCNT_121M;
-	else
-		pllcr = LVDPLLCR_PLLDLYCNT_150M;
-
-	rcar_lvds_write(lvds, LVDPLLCR, pllcr);
-
-	/* Turn all the channels on. */
-	rcar_lvds_write(lvds, LVDCR1,
-			LVDCR1_CHSTBY(3) | LVDCR1_CHSTBY(2) |
-			LVDCR1_CHSTBY(1) | LVDCR1_CHSTBY(0) | LVDCR1_CLKSTBY);
-
-	/*
-	 * Set the  LVDS mode, select the input, enable LVDS operation,
-	 * and turn bias circuitry on.
-	 */
-	lvdcr0 = (lvds->mode << LVDCR0_LVMD_SHIFT) | LVDCR0_BEN | LVDCR0_LVEN;
-	if (rcrtc->index == 2)
-		lvdcr0 |= LVDCR0_DUSEL;
-	rcar_lvds_write(lvds, LVDCR0, lvdcr0);
-
-	/*
-	 * Turn the PLL on, wait for the startup delay, and turn the output
-	 * on.
-	 */
-	lvdcr0 |= LVDCR0_PLLON;
-	rcar_lvds_write(lvds, LVDCR0, lvdcr0);
-
-	usleep_range(100, 150);
-
-	lvdcr0 |= LVDCR0_LVRES;
-	rcar_lvds_write(lvds, LVDCR0, lvdcr0);
-}
-
-static void rcar_du_lvdsenc_start_gen3(struct rcar_du_lvdsenc *lvds,
-				       struct rcar_du_crtc *rcrtc)
-{
-	const struct drm_display_mode *mode = &rcrtc->crtc.mode;
-	unsigned int freq = mode->clock;
-	u32 lvdcr0;
-	u32 pllcr;
-
-	/* PLL clock configuration */
-	if (freq < 42000)
-		pllcr = LVDPLLCR_PLLDIVCNT_42M;
-	else if (freq < 85000)
-		pllcr = LVDPLLCR_PLLDIVCNT_85M;
-	else if (freq < 128000)
-		pllcr = LVDPLLCR_PLLDIVCNT_128M;
-	else
-		pllcr = LVDPLLCR_PLLDIVCNT_148M;
-
-	rcar_lvds_write(lvds, LVDPLLCR, pllcr);
-
-	/* Turn all the channels on. */
-	rcar_lvds_write(lvds, LVDCR1,
-			LVDCR1_CHSTBY(3) | LVDCR1_CHSTBY(2) |
-			LVDCR1_CHSTBY(1) | LVDCR1_CHSTBY(0) | LVDCR1_CLKSTBY);
-
-	/*
-	 * Turn the PLL on, set it to LVDS normal mode, wait for the startup
-	 * delay and turn the output on.
-	 */
-	lvdcr0 = (lvds->mode << LVDCR0_LVMD_SHIFT) | LVDCR0_PLLON;
-	rcar_lvds_write(lvds, LVDCR0, lvdcr0);
-
-	lvdcr0 |= LVDCR0_PWD;
-	rcar_lvds_write(lvds, LVDCR0, lvdcr0);
-
-	usleep_range(100, 150);
-
-	lvdcr0 |= LVDCR0_LVRES;
-	rcar_lvds_write(lvds, LVDCR0, lvdcr0);
-}
-
-static int rcar_du_lvdsenc_start(struct rcar_du_lvdsenc *lvds,
-				 struct rcar_du_crtc *rcrtc)
-{
-	u32 lvdhcr;
-	int ret;
-
-	if (lvds->enabled)
-		return 0;
-
-	ret = clk_prepare_enable(lvds->clock);
-	if (ret < 0)
-		return ret;
-
-	/*
-	 * Hardcode the channels and control signals routing for now.
-	 *
-	 * HSYNC -> CTRL0
-	 * VSYNC -> CTRL1
-	 * DISP  -> CTRL2
-	 * 0     -> CTRL3
-	 */
-	rcar_lvds_write(lvds, LVDCTRCR, LVDCTRCR_CTR3SEL_ZERO |
-			LVDCTRCR_CTR2SEL_DISP | LVDCTRCR_CTR1SEL_VSYNC |
-			LVDCTRCR_CTR0SEL_HSYNC);
-
-	if (rcar_du_needs(lvds->dev, RCAR_DU_QUIRK_LVDS_LANES))
-		lvdhcr = LVDCHCR_CHSEL_CH(0, 0) | LVDCHCR_CHSEL_CH(1, 3)
-		       | LVDCHCR_CHSEL_CH(2, 2) | LVDCHCR_CHSEL_CH(3, 1);
-	else
-		lvdhcr = LVDCHCR_CHSEL_CH(0, 0) | LVDCHCR_CHSEL_CH(1, 1)
-		       | LVDCHCR_CHSEL_CH(2, 2) | LVDCHCR_CHSEL_CH(3, 3);
-
-	rcar_lvds_write(lvds, LVDCHCR, lvdhcr);
-
-	/* Perform generation-specific initialization. */
-	if (lvds->dev->info->gen < 3)
-		rcar_du_lvdsenc_start_gen2(lvds, rcrtc);
-	else
-		rcar_du_lvdsenc_start_gen3(lvds, rcrtc);
-
-	lvds->enabled = true;
-
-	return 0;
-}
-
-static void rcar_du_lvdsenc_stop(struct rcar_du_lvdsenc *lvds)
-{
-	if (!lvds->enabled)
-		return;
-
-	rcar_lvds_write(lvds, LVDCR0, 0);
-	rcar_lvds_write(lvds, LVDCR1, 0);
-
-	clk_disable_unprepare(lvds->clock);
-
-	lvds->enabled = false;
-}
-
-int rcar_du_lvdsenc_enable(struct rcar_du_lvdsenc *lvds, struct drm_crtc *crtc,
-			   bool enable)
-{
-	if (!enable) {
-		rcar_du_lvdsenc_stop(lvds);
-		return 0;
-	} else if (crtc) {
-		struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc);
-		return rcar_du_lvdsenc_start(lvds, rcrtc);
-	} else
-		return -EINVAL;
-}
-
-void rcar_du_lvdsenc_atomic_check(struct rcar_du_lvdsenc *lvds,
-				  struct drm_display_mode *mode)
-{
-	/*
-	 * The internal LVDS encoder has a restricted clock frequency operating
-	 * range (31MHz to 148.5MHz). Clamp the clock accordingly.
-	 */
-	mode->clock = clamp(mode->clock, 31000, 148500);
-}
-
-void rcar_du_lvdsenc_set_mode(struct rcar_du_lvdsenc *lvds,
-			      enum rcar_lvds_mode mode)
-{
-	lvds->mode = mode;
-}
-
-static int rcar_du_lvdsenc_get_resources(struct rcar_du_lvdsenc *lvds,
-					 struct platform_device *pdev)
-{
-	struct resource *mem;
-	char name[7];
-
-	sprintf(name, "lvds.%u", lvds->index);
-
-	mem = platform_get_resource_byname(pdev, IORESOURCE_MEM, name);
-	lvds->mmio = devm_ioremap_resource(&pdev->dev, mem);
-	if (IS_ERR(lvds->mmio))
-		return PTR_ERR(lvds->mmio);
-
-	lvds->clock = devm_clk_get(&pdev->dev, name);
-	if (IS_ERR(lvds->clock)) {
-		dev_err(&pdev->dev, "failed to get clock for %s\n", name);
-		return PTR_ERR(lvds->clock);
-	}
-
-	return 0;
-}
-
-int rcar_du_lvdsenc_init(struct rcar_du_device *rcdu)
-{
-	struct platform_device *pdev = to_platform_device(rcdu->dev);
-	struct rcar_du_lvdsenc *lvds;
-	unsigned int i;
-	int ret;
-
-	for (i = 0; i < rcdu->info->num_lvds; ++i) {
-		lvds = devm_kzalloc(&pdev->dev, sizeof(*lvds), GFP_KERNEL);
-		if (lvds == NULL)
-			return -ENOMEM;
-
-		lvds->dev = rcdu;
-		lvds->index = i;
-		lvds->input = i ? RCAR_LVDS_INPUT_DU1 : RCAR_LVDS_INPUT_DU0;
-		lvds->enabled = false;
-
-		ret = rcar_du_lvdsenc_get_resources(lvds, pdev);
-		if (ret < 0)
-			return ret;
-
-		rcdu->lvds[i] = lvds;
-	}
-
-	return 0;
-}
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.h b/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.h
deleted file mode 100644
index 7218ac89333e..000000000000
--- a/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * rcar_du_lvdsenc.h  --  R-Car Display Unit LVDS Encoder
- *
- * Copyright (C) 2013-2014 Renesas Electronics Corporation
- *
- * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __RCAR_DU_LVDSENC_H__
-#define __RCAR_DU_LVDSENC_H__
-
-#include <linux/io.h>
-#include <linux/module.h>
-
-struct rcar_drm_crtc;
-struct rcar_du_lvdsenc;
-
-enum rcar_lvds_input {
-	RCAR_LVDS_INPUT_DU0,
-	RCAR_LVDS_INPUT_DU1,
-	RCAR_LVDS_INPUT_DU2,
-};
-
-/* Keep in sync with the LVDCR0.LVMD hardware register values. */
-enum rcar_lvds_mode {
-	RCAR_LVDS_MODE_JEIDA = 0,
-	RCAR_LVDS_MODE_MIRROR = 1,
-	RCAR_LVDS_MODE_VESA = 4,
-};
-
-#if IS_ENABLED(CONFIG_DRM_RCAR_LVDS)
-int rcar_du_lvdsenc_init(struct rcar_du_device *rcdu);
-void rcar_du_lvdsenc_set_mode(struct rcar_du_lvdsenc *lvds,
-			      enum rcar_lvds_mode mode);
-int rcar_du_lvdsenc_enable(struct rcar_du_lvdsenc *lvds,
-			   struct drm_crtc *crtc, bool enable);
-void rcar_du_lvdsenc_atomic_check(struct rcar_du_lvdsenc *lvds,
-				  struct drm_display_mode *mode);
-#else
-static inline int rcar_du_lvdsenc_init(struct rcar_du_device *rcdu)
-{
-	return 0;
-}
-static inline void rcar_du_lvdsenc_set_mode(struct rcar_du_lvdsenc *lvds,
-					    enum rcar_lvds_mode mode)
-{
-}
-static inline int rcar_du_lvdsenc_enable(struct rcar_du_lvdsenc *lvds,
-					 struct drm_crtc *crtc, bool enable)
-{
-	return 0;
-}
-static inline void rcar_du_lvdsenc_atomic_check(struct rcar_du_lvdsenc *lvds,
-						struct drm_display_mode *mode)
-{
-}
-#endif
-
-#endif /* __RCAR_DU_LVDSENC_H__ */
diff --git a/drivers/gpu/drm/rcar-du/rcar_lvds.c b/drivers/gpu/drm/rcar-du/rcar_lvds.c
new file mode 100644
index 000000000000..68c1c168e8bf
--- /dev/null
+++ b/drivers/gpu/drm/rcar-du/rcar_lvds.c
@@ -0,0 +1,546 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * rcar_lvds.c  --  R-Car LVDS Encoder
+ *
+ * Copyright (C) 2013-2014 Renesas Electronics Corporation
+ *
+ * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_graph.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_bridge.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_panel.h>
+
+#include "rcar_lvds_regs.h"
+
+/* Keep in sync with the LVDCR0.LVMD hardware register values. */
+enum rcar_lvds_mode {
+	RCAR_LVDS_MODE_JEIDA = 0,
+	RCAR_LVDS_MODE_MIRROR = 1,
+	RCAR_LVDS_MODE_VESA = 4,
+};
+
+#define RCAR_LVDS_QUIRK_LANES	(1 << 0)	/* LVDS lanes 1 and 3 inverted */
+
+struct rcar_lvds_device_info {
+	unsigned int gen;
+	unsigned int quirks;
+};
+
+struct rcar_lvds {
+	struct device *dev;
+	const struct rcar_lvds_device_info *info;
+
+	struct drm_bridge bridge;
+
+	struct drm_bridge *next_bridge;
+	struct drm_connector connector;
+	struct drm_panel *panel;
+
+	void __iomem *mmio;
+	struct clk *clock;
+	bool enabled;
+
+	struct drm_display_mode display_mode;
+	enum rcar_lvds_mode mode;
+};
+
+#define bridge_to_rcar_lvds(bridge) \
+	container_of(bridge, struct rcar_lvds, bridge)
+
+#define connector_to_rcar_lvds(connector) \
+	container_of(connector, struct rcar_lvds, connector)
+
+static void rcar_lvds_write(struct rcar_lvds *lvds, u32 reg, u32 data)
+{
+	iowrite32(data, lvds->mmio + reg);
+}
+
+/* -----------------------------------------------------------------------------
+ * Connector & Panel
+ */
+
+static int rcar_lvds_connector_get_modes(struct drm_connector *connector)
+{
+	struct rcar_lvds *lvds = connector_to_rcar_lvds(connector);
+
+	return drm_panel_get_modes(lvds->panel);
+}
+
+static int rcar_lvds_connector_atomic_check(struct drm_connector *connector,
+					    struct drm_connector_state *state)
+{
+	struct rcar_lvds *lvds = connector_to_rcar_lvds(connector);
+	const struct drm_display_mode *panel_mode;
+	struct drm_crtc_state *crtc_state;
+
+	if (list_empty(&connector->modes)) {
+		dev_dbg(lvds->dev, "connector: empty modes list\n");
+		return -EINVAL;
+	}
+
+	panel_mode = list_first_entry(&connector->modes,
+				      struct drm_display_mode, head);
+
+	/* We're not allowed to modify the resolution. */
+	crtc_state = drm_atomic_get_crtc_state(state->state, state->crtc);
+	if (IS_ERR(crtc_state))
+		return PTR_ERR(crtc_state);
+
+	if (crtc_state->mode.hdisplay != panel_mode->hdisplay ||
+	    crtc_state->mode.vdisplay != panel_mode->vdisplay)
+		return -EINVAL;
+
+	/* The flat panel mode is fixed, just copy it to the adjusted mode. */
+	drm_mode_copy(&crtc_state->adjusted_mode, panel_mode);
+
+	return 0;
+}
+
+static const struct drm_connector_helper_funcs rcar_lvds_conn_helper_funcs = {
+	.get_modes = rcar_lvds_connector_get_modes,
+	.atomic_check = rcar_lvds_connector_atomic_check,
+};
+
+static const struct drm_connector_funcs rcar_lvds_conn_funcs = {
+	.reset = drm_atomic_helper_connector_reset,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.destroy = drm_connector_cleanup,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+/* -----------------------------------------------------------------------------
+ * Bridge
+ */
+
+static void rcar_lvds_enable_gen2(struct rcar_lvds *lvds)
+{
+	const struct drm_display_mode *mode = &lvds->display_mode;
+	/*
+	 * FIXME: We should really retrieve this through the state, but how do
+	 * we get a state pointer?
+	 */
+	struct drm_crtc *crtc = lvds->bridge.encoder->crtc;
+	unsigned int freq = mode->clock;
+	u32 lvdcr0;
+	u32 pllcr;
+
+	/* PLL clock configuration */
+	if (freq < 39000)
+		pllcr = LVDPLLCR_CEEN | LVDPLLCR_COSEL | LVDPLLCR_PLLDLYCNT_38M;
+	else if (freq < 61000)
+		pllcr = LVDPLLCR_CEEN | LVDPLLCR_COSEL | LVDPLLCR_PLLDLYCNT_60M;
+	else if (freq < 121000)
+		pllcr = LVDPLLCR_CEEN | LVDPLLCR_COSEL | LVDPLLCR_PLLDLYCNT_121M;
+	else
+		pllcr = LVDPLLCR_PLLDLYCNT_150M;
+
+	rcar_lvds_write(lvds, LVDPLLCR, pllcr);
+
+	/* Turn all the channels on. */
+	rcar_lvds_write(lvds, LVDCR1, LVDCR1_CHSTBY(3) | LVDCR1_CHSTBY(2) |
+			LVDCR1_CHSTBY(1) | LVDCR1_CHSTBY(0) | LVDCR1_CLKSTBY);
+
+	/*
+	 * Set the  LVDS mode, select the input, enable LVDS operation,
+	 * and turn bias circuitry on.
+	 */
+	lvdcr0 = (lvds->mode << LVDCR0_LVMD_SHIFT) | LVDCR0_BEN | LVDCR0_LVEN;
+	if (drm_crtc_index(crtc) == 2)
+		lvdcr0 |= LVDCR0_DUSEL;
+	rcar_lvds_write(lvds, LVDCR0, lvdcr0);
+
+	/*
+	 * Turn the PLL on, wait for the startup delay, and turn the output
+	 * on.
+	 */
+	lvdcr0 |= LVDCR0_PLLON;
+	rcar_lvds_write(lvds, LVDCR0, lvdcr0);
+
+	usleep_range(100, 150);
+
+	lvdcr0 |= LVDCR0_LVRES;
+	rcar_lvds_write(lvds, LVDCR0, lvdcr0);
+}
+
+static void rcar_lvds_enable_gen3(struct rcar_lvds *lvds)
+{
+	const struct drm_display_mode *mode = &lvds->display_mode;
+	unsigned int freq = mode->clock;
+	u32 lvdcr0;
+	u32 pllcr;
+
+	/* PLL clock configuration */
+	if (freq < 42000)
+		pllcr = LVDPLLCR_PLLDIVCNT_42M;
+	else if (freq < 85000)
+		pllcr = LVDPLLCR_PLLDIVCNT_85M;
+	else if (freq < 128000)
+		pllcr = LVDPLLCR_PLLDIVCNT_128M;
+	else
+		pllcr = LVDPLLCR_PLLDIVCNT_148M;
+
+	rcar_lvds_write(lvds, LVDPLLCR, pllcr);
+
+	/* Turn all the channels on. */
+	rcar_lvds_write(lvds, LVDCR1, LVDCR1_CHSTBY(3) | LVDCR1_CHSTBY(2) |
+			LVDCR1_CHSTBY(1) | LVDCR1_CHSTBY(0) | LVDCR1_CLKSTBY);
+
+	/*
+	 * Turn the PLL on, set it to LVDS normal mode, wait for the startup
+	 * delay and turn the output on.
+	 */
+	lvdcr0 = (lvds->mode << LVDCR0_LVMD_SHIFT) | LVDCR0_PLLON;
+	rcar_lvds_write(lvds, LVDCR0, lvdcr0);
+
+	lvdcr0 |= LVDCR0_PWD;
+	rcar_lvds_write(lvds, LVDCR0, lvdcr0);
+
+	usleep_range(100, 150);
+
+	lvdcr0 |= LVDCR0_LVRES;
+	rcar_lvds_write(lvds, LVDCR0, lvdcr0);
+}
+
+static void rcar_lvds_enable(struct drm_bridge *bridge)
+{
+	struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge);
+	u32 lvdhcr;
+	int ret;
+
+	WARN_ON(lvds->enabled);
+
+	ret = clk_prepare_enable(lvds->clock);
+	if (ret < 0)
+		return;
+
+	/*
+	 * Hardcode the channels and control signals routing for now.
+	 *
+	 * HSYNC -> CTRL0
+	 * VSYNC -> CTRL1
+	 * DISP  -> CTRL2
+	 * 0     -> CTRL3
+	 */
+	rcar_lvds_write(lvds, LVDCTRCR, LVDCTRCR_CTR3SEL_ZERO |
+			LVDCTRCR_CTR2SEL_DISP | LVDCTRCR_CTR1SEL_VSYNC |
+			LVDCTRCR_CTR0SEL_HSYNC);
+
+	if (lvds->info->quirks & RCAR_LVDS_QUIRK_LANES)
+		lvdhcr = LVDCHCR_CHSEL_CH(0, 0) | LVDCHCR_CHSEL_CH(1, 3)
+		       | LVDCHCR_CHSEL_CH(2, 2) | LVDCHCR_CHSEL_CH(3, 1);
+	else
+		lvdhcr = LVDCHCR_CHSEL_CH(0, 0) | LVDCHCR_CHSEL_CH(1, 1)
+		       | LVDCHCR_CHSEL_CH(2, 2) | LVDCHCR_CHSEL_CH(3, 3);
+
+	rcar_lvds_write(lvds, LVDCHCR, lvdhcr);
+
+	/* Perform generation-specific initialization. */
+	if (lvds->info->gen < 3)
+		rcar_lvds_enable_gen2(lvds);
+	else
+		rcar_lvds_enable_gen3(lvds);
+
+	if (lvds->panel) {
+		drm_panel_prepare(lvds->panel);
+		drm_panel_enable(lvds->panel);
+	}
+
+	lvds->enabled = true;
+}
+
+static void rcar_lvds_disable(struct drm_bridge *bridge)
+{
+	struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge);
+
+	WARN_ON(!lvds->enabled);
+
+	if (lvds->panel) {
+		drm_panel_disable(lvds->panel);
+		drm_panel_unprepare(lvds->panel);
+	}
+
+	rcar_lvds_write(lvds, LVDCR0, 0);
+	rcar_lvds_write(lvds, LVDCR1, 0);
+
+	clk_disable_unprepare(lvds->clock);
+
+	lvds->enabled = false;
+}
+
+static bool rcar_lvds_mode_fixup(struct drm_bridge *bridge,
+				 const struct drm_display_mode *mode,
+				 struct drm_display_mode *adjusted_mode)
+{
+	/*
+	 * The internal LVDS encoder has a restricted clock frequency operating
+	 * range (31MHz to 148.5MHz). Clamp the clock accordingly.
+	 */
+	adjusted_mode->clock = clamp(adjusted_mode->clock, 31000, 148500);
+
+	return true;
+}
+
+static void rcar_lvds_get_lvds_mode(struct rcar_lvds *lvds)
+{
+	struct drm_display_info *info = &lvds->connector.display_info;
+	enum rcar_lvds_mode mode;
+
+	/*
+	 * There is no API yet to retrieve LVDS mode from a bridge, only panels
+	 * are supported.
+	 */
+	if (!lvds->panel)
+		return;
+
+	if (!info->num_bus_formats || !info->bus_formats) {
+		dev_err(lvds->dev, "no LVDS bus format reported\n");
+		return;
+	}
+
+	switch (info->bus_formats[0]) {
+	case MEDIA_BUS_FMT_RGB666_1X7X3_SPWG:
+	case MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA:
+		mode = RCAR_LVDS_MODE_JEIDA;
+		break;
+	case MEDIA_BUS_FMT_RGB888_1X7X4_SPWG:
+		mode = RCAR_LVDS_MODE_VESA;
+		break;
+	default:
+		dev_err(lvds->dev, "unsupported LVDS bus format 0x%04x\n",
+			info->bus_formats[0]);
+		return;
+	}
+
+	if (info->bus_flags & DRM_BUS_FLAG_DATA_LSB_TO_MSB)
+		mode |= RCAR_LVDS_MODE_MIRROR;
+
+	lvds->mode = mode;
+}
+
+static void rcar_lvds_mode_set(struct drm_bridge *bridge,
+			       struct drm_display_mode *mode,
+			       struct drm_display_mode *adjusted_mode)
+{
+	struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge);
+
+	WARN_ON(lvds->enabled);
+
+	lvds->display_mode = *adjusted_mode;
+
+	rcar_lvds_get_lvds_mode(lvds);
+}
+
+static int rcar_lvds_attach(struct drm_bridge *bridge)
+{
+	struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge);
+	struct drm_connector *connector = &lvds->connector;
+	struct drm_encoder *encoder = bridge->encoder;
+	int ret;
+
+	/* If we have a next bridge just attach it. */
+	if (lvds->next_bridge)
+		return drm_bridge_attach(bridge->encoder, lvds->next_bridge,
+					 bridge);
+
+	/* Otherwise we have a panel, create a connector. */
+	ret = drm_connector_init(bridge->dev, connector, &rcar_lvds_conn_funcs,
+				 DRM_MODE_CONNECTOR_LVDS);
+	if (ret < 0)
+		return ret;
+
+	drm_connector_helper_add(connector, &rcar_lvds_conn_helper_funcs);
+
+	ret = drm_mode_connector_attach_encoder(connector, encoder);
+	if (ret < 0)
+		return ret;
+
+	return drm_panel_attach(lvds->panel, connector);
+}
+
+static void rcar_lvds_detach(struct drm_bridge *bridge)
+{
+	struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge);
+
+	if (lvds->panel)
+		drm_panel_detach(lvds->panel);
+}
+
+static const struct drm_bridge_funcs rcar_lvds_bridge_ops = {
+	.attach = rcar_lvds_attach,
+	.detach = rcar_lvds_detach,
+	.enable = rcar_lvds_enable,
+	.disable = rcar_lvds_disable,
+	.mode_fixup = rcar_lvds_mode_fixup,
+	.mode_set = rcar_lvds_mode_set,
+};
+
+/* -----------------------------------------------------------------------------
+ * Probe & Remove
+ */
+
+static int rcar_lvds_parse_dt(struct rcar_lvds *lvds)
+{
+	struct device_node *local_output = NULL;
+	struct device_node *remote_input = NULL;
+	struct device_node *remote = NULL;
+	struct device_node *node;
+	bool is_bridge = false;
+	int ret = 0;
+
+	local_output = of_graph_get_endpoint_by_regs(lvds->dev->of_node, 1, 0);
+	if (!local_output) {
+		dev_dbg(lvds->dev, "unconnected port@1\n");
+		return -ENODEV;
+	}
+
+	/*
+	 * Locate the connected entity and infer its type from the number of
+	 * endpoints.
+	 */
+	remote = of_graph_get_remote_port_parent(local_output);
+	if (!remote) {
+		dev_dbg(lvds->dev, "unconnected endpoint %pOF\n", local_output);
+		ret = -ENODEV;
+		goto done;
+	}
+
+	if (!of_device_is_available(remote)) {
+		dev_dbg(lvds->dev, "connected entity %pOF is disabled\n",
+			remote);
+		ret = -ENODEV;
+		goto done;
+	}
+
+	remote_input = of_graph_get_remote_endpoint(local_output);
+
+	for_each_endpoint_of_node(remote, node) {
+		if (node != remote_input) {
+			/*
+			 * We've found one endpoint other than the input, this
+			 * must be a bridge.
+			 */
+			is_bridge = true;
+			of_node_put(node);
+			break;
+		}
+	}
+
+	if (is_bridge) {
+		lvds->next_bridge = of_drm_find_bridge(remote);
+		if (!lvds->next_bridge)
+			ret = -EPROBE_DEFER;
+	} else {
+		lvds->panel = of_drm_find_panel(remote);
+		if (!lvds->panel)
+			ret = -EPROBE_DEFER;
+	}
+
+done:
+	of_node_put(local_output);
+	of_node_put(remote_input);
+	of_node_put(remote);
+
+	return ret;
+}
+
+static int rcar_lvds_probe(struct platform_device *pdev)
+{
+	struct rcar_lvds *lvds;
+	struct resource *mem;
+	int ret;
+
+	lvds = devm_kzalloc(&pdev->dev, sizeof(*lvds), GFP_KERNEL);
+	if (lvds == NULL)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, lvds);
+
+	lvds->dev = &pdev->dev;
+	lvds->info = of_device_get_match_data(&pdev->dev);
+	lvds->enabled = false;
+
+	ret = rcar_lvds_parse_dt(lvds);
+	if (ret < 0)
+		return ret;
+
+	lvds->bridge.driver_private = lvds;
+	lvds->bridge.funcs = &rcar_lvds_bridge_ops;
+	lvds->bridge.of_node = pdev->dev.of_node;
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	lvds->mmio = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(lvds->mmio))
+		return PTR_ERR(lvds->mmio);
+
+	lvds->clock = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(lvds->clock)) {
+		dev_err(&pdev->dev, "failed to get clock\n");
+		return PTR_ERR(lvds->clock);
+	}
+
+	drm_bridge_add(&lvds->bridge);
+
+	return 0;
+}
+
+static int rcar_lvds_remove(struct platform_device *pdev)
+{
+	struct rcar_lvds *lvds = platform_get_drvdata(pdev);
+
+	drm_bridge_remove(&lvds->bridge);
+
+	return 0;
+}
+
+static const struct rcar_lvds_device_info rcar_lvds_gen2_info = {
+	.gen = 2,
+};
+
+static const struct rcar_lvds_device_info rcar_lvds_r8a7790_info = {
+	.gen = 2,
+	.quirks = RCAR_LVDS_QUIRK_LANES,
+};
+
+static const struct rcar_lvds_device_info rcar_lvds_gen3_info = {
+	.gen = 3,
+};
+
+static const struct of_device_id rcar_lvds_of_table[] = {
+	{ .compatible = "renesas,r8a7743-lvds", .data = &rcar_lvds_gen2_info },
+	{ .compatible = "renesas,r8a7790-lvds", .data = &rcar_lvds_r8a7790_info },
+	{ .compatible = "renesas,r8a7791-lvds", .data = &rcar_lvds_gen2_info },
+	{ .compatible = "renesas,r8a7793-lvds", .data = &rcar_lvds_gen2_info },
+	{ .compatible = "renesas,r8a7795-lvds", .data = &rcar_lvds_gen3_info },
+	{ .compatible = "renesas,r8a7796-lvds", .data = &rcar_lvds_gen3_info },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(of, rcar_lvds_of_table);
+
+static struct platform_driver rcar_lvds_platform_driver = {
+	.probe		= rcar_lvds_probe,
+	.remove		= rcar_lvds_remove,
+	.driver		= {
+		.name	= "rcar-lvds",
+		.of_match_table = rcar_lvds_of_table,
+	},
+};
+
+module_platform_driver(rcar_lvds_platform_driver);
+
+MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>");
+MODULE_DESCRIPTION("Renesas R-Car LVDS Encoder Driver");
+MODULE_LICENSE("GPL");
