diff mbox

[2/3] drm: bridge: dw-hdmi: check the cec-disable property

Message ID 20180319114345.29837-3-hverkuil@xs4all.nl (mailing list archive)
State New, archived
Headers show

Commit Message

Hans Verkuil March 19, 2018, 11:43 a.m. UTC
From: Hans Verkuil <hans.verkuil@cisco.com>

If the cec-disable property was set, then disable the DW CEC
controller. This is needed for boards that have their own
CEC controller.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
---
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

Comments

Neil Armstrong March 19, 2018, 1:11 p.m. UTC | #1
On 19/03/2018 12:43, Hans Verkuil wrote:
> From: Hans Verkuil <hans.verkuil@cisco.com>
> 
> If the cec-disable property was set, then disable the DW CEC
> controller. This is needed for boards that have their own
> CEC controller.
> 
> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
> ---
>  drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> index a38db40ce990..597220e40541 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> @@ -2508,7 +2508,8 @@ __dw_hdmi_probe(struct platform_device *pdev,
>  		hdmi->audio = platform_device_register_full(&pdevinfo);
>  	}
>  
> -	if (config0 & HDMI_CONFIG0_CEC) {
> +	if ((config0 & HDMI_CONFIG0_CEC) &&
> +	    !of_property_read_bool(np, "cec-disable")) {
>  		cec.hdmi = hdmi;
>  		cec.ops = &dw_hdmi_cec_ops;
>  		cec.irq = irq;
> 

I suspected the bit was off for the Amlogic GX SoCs, I was wrong...

Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
diff mbox

Patch

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index a38db40ce990..597220e40541 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -2508,7 +2508,8 @@  __dw_hdmi_probe(struct platform_device *pdev,
 		hdmi->audio = platform_device_register_full(&pdevinfo);
 	}
 
-	if (config0 & HDMI_CONFIG0_CEC) {
+	if ((config0 & HDMI_CONFIG0_CEC) &&
+	    !of_property_read_bool(np, "cec-disable")) {
 		cec.hdmi = hdmi;
 		cec.ops = &dw_hdmi_cec_ops;
 		cec.irq = irq;