diff mbox

[2/2,v2] drm/pl111: Enable device-specific assigned memory

Message ID 20180406141935.6801-2-linus.walleij@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Linus Walleij April 6, 2018, 2:19 p.m. UTC
The Versatile Express has 8 MB of dedicated video RAM (VRAM)
on the motherboard, which is what we should be using for the
PL111 if available. On this platform, the memory backplane
is constructed so that only this memory will work properly
with the CLCD on the motherboard, using any other memory
region just gives random snow on the display.

The CA9 Versatile Express also has a PL111 instance on its
core tile. This is OK, it has been tested with the motherboard
VRAM and that works just as fine as regular CMA memory.

The memory is assigned to the device using the memory-region
device tree property and a "shared-dma-pool" reserved
memory pool like this:

reserved-memory {
        #address-cells = <1>;
        #size-cells = <1>;
        ranges;

        vram: vram@48000000 {
                compatible = "shared-dma-pool";
                reg = <0x48000000 0x00800000>;
                no-map;
        };
};

clcd@1f000 {
        compatible = "arm,pl111", "arm,primecell";
	(...)
        memory-region = <&vram>;
}·;

Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v1->v2:
- Make sure to also call of_reserved_mem_device_release() at
  remove() and errorpath.
---
 drivers/gpu/drm/pl111/pl111_drv.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

Comments

Eric Anholt April 8, 2018, 1:08 a.m. UTC | #1
Linus Walleij <linus.walleij@linaro.org> writes:

> The Versatile Express has 8 MB of dedicated video RAM (VRAM)
> on the motherboard, which is what we should be using for the
> PL111 if available. On this platform, the memory backplane
> is constructed so that only this memory will work properly
> with the CLCD on the motherboard, using any other memory
> region just gives random snow on the display.
>
> The CA9 Versatile Express also has a PL111 instance on its
> core tile. This is OK, it has been tested with the motherboard
> VRAM and that works just as fine as regular CMA memory.
>
> The memory is assigned to the device using the memory-region
> device tree property and a "shared-dma-pool" reserved
> memory pool like this:
>
> reserved-memory {
>         #address-cells = <1>;
>         #size-cells = <1>;
>         ranges;
>
>         vram: vram@48000000 {
>                 compatible = "shared-dma-pool";
>                 reg = <0x48000000 0x00800000>;
>                 no-map;
>         };
> };
>
> clcd@1f000 {
>         compatible = "arm,pl111", "arm,primecell";
> 	(...)
>         memory-region = <&vram>;
> }·;
>
> Cc: Liviu Dudau <liviu.dudau@arm.com>
> Cc: Mali DP Maintainers <malidp@foss.arm.com>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> ChangeLog v1->v2:
> - Make sure to also call of_reserved_mem_device_release() at
>   remove() and errorpath.
> ---
>  drivers/gpu/drm/pl111/pl111_drv.c | 13 ++++++++++++-
>  1 file changed, 12 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/pl111/pl111_drv.c b/drivers/gpu/drm/pl111/pl111_drv.c
> index 4621259d5387..bc57c15d9fe4 100644
> --- a/drivers/gpu/drm/pl111/pl111_drv.c
> +++ b/drivers/gpu/drm/pl111/pl111_drv.c
> @@ -60,6 +60,7 @@
>  #include <linux/slab.h>
>  #include <linux/of.h>
>  #include <linux/of_graph.h>
> +#include <linux/of_reserved_mem.h>
>  
>  #include <drm/drmP.h>
>  #include <drm/drm_atomic_helper.h>
> @@ -257,6 +258,10 @@ static int pl111_amba_probe(struct amba_device *amba_dev,
>  	drm->dev_private = priv;
>  	priv->variant = variant;
>  
> +	ret = of_reserved_mem_device_init(dev);
> +	if (!ret)
> +		dev_info(dev, "using device-specific reserved memory\n");
> +
>  	if (of_property_read_u32(dev->of_node, "max-memory-bandwidth",
>  				 &priv->memory_bw)) {
>  		dev_info(dev, "no max memory bandwidth specified, assume unlimited\n");
> @@ -275,7 +280,8 @@ static int pl111_amba_probe(struct amba_device *amba_dev,
>  	priv->regs = devm_ioremap_resource(dev, &amba_dev->res);
>  	if (IS_ERR(priv->regs)) {
>  		dev_err(dev, "%s failed mmio\n", __func__);
> -		return PTR_ERR(priv->regs);
> +		ret = PTR_ERR(priv->regs);
> +		goto mem_rel;
>  	}

Shouldn't this error path be jumping to dev_unref, as well?  We're
trying to match drm_dev_alloc(), right?

I'm still a little bothered that we're allowing imports to pl111 of CMA
buffers that we can't scan out.  Could we just refuse all
.gem_prime_import*() on this platform?
Linus Walleij April 17, 2018, 12:23 p.m. UTC | #2
On Sun, Apr 8, 2018 at 3:08 AM, Eric Anholt <eric@anholt.net> wrote:

>>       if (of_property_read_u32(dev->of_node, "max-memory-bandwidth",
>>                                &priv->memory_bw)) {
>>               dev_info(dev, "no max memory bandwidth specified, assume unlimited\n");
>> @@ -275,7 +280,8 @@ static int pl111_amba_probe(struct amba_device *amba_dev,
>>       priv->regs = devm_ioremap_resource(dev, &amba_dev->res);
>>       if (IS_ERR(priv->regs)) {
>>               dev_err(dev, "%s failed mmio\n", __func__);
>> -             return PTR_ERR(priv->regs);
>> +             ret = PTR_ERR(priv->regs);
>> +             goto mem_rel;
>>       }
>
> Shouldn't this error path be jumping to dev_unref, as well?  We're
> trying to match drm_dev_alloc(), right?

OK I fixed.

> I'm still a little bothered that we're allowing imports to pl111 of CMA
> buffers that we can't scan out.  Could we just refuse all
> .gem_prime_import*() on this platform?

I am sorry but I do not understand how CMA, dmabuf and GEM play
together to decode this and figure out what to do.

Do you mean that if we find device assigned memory, i.e. that there
is this special memory which is all the controller can scan out,
I should just implement .gem_prime_impport() instead of the
currently assigned drm_gem_prime_import() to something just
returning return ERR_PTR(-EINVAL); so it always fails?

What about .gem_prime_import_sg_table()? Exporting should
work fine since the memory is always readable by CPU.

Yours,
Linus Walleij
Eric Anholt April 17, 2018, 6:44 p.m. UTC | #3
Linus Walleij <linus.walleij@linaro.org> writes:

> On Sun, Apr 8, 2018 at 3:08 AM, Eric Anholt <eric@anholt.net> wrote:
>
>>>       if (of_property_read_u32(dev->of_node, "max-memory-bandwidth",
>>>                                &priv->memory_bw)) {
>>>               dev_info(dev, "no max memory bandwidth specified, assume unlimited\n");
>>> @@ -275,7 +280,8 @@ static int pl111_amba_probe(struct amba_device *amba_dev,
>>>       priv->regs = devm_ioremap_resource(dev, &amba_dev->res);
>>>       if (IS_ERR(priv->regs)) {
>>>               dev_err(dev, "%s failed mmio\n", __func__);
>>> -             return PTR_ERR(priv->regs);
>>> +             ret = PTR_ERR(priv->regs);
>>> +             goto mem_rel;
>>>       }
>>
>> Shouldn't this error path be jumping to dev_unref, as well?  We're
>> trying to match drm_dev_alloc(), right?
>
> OK I fixed.
>
>> I'm still a little bothered that we're allowing imports to pl111 of CMA
>> buffers that we can't scan out.  Could we just refuse all
>> .gem_prime_import*() on this platform?
>
> I am sorry but I do not understand how CMA, dmabuf and GEM play
> together to decode this and figure out what to do.
>
> Do you mean that if we find device assigned memory, i.e. that there
> is this special memory which is all the controller can scan out,
> I should just implement .gem_prime_impport() instead of the
> currently assigned drm_gem_prime_import() to something just
> returning return ERR_PTR(-EINVAL); so it always fails?
>
> What about .gem_prime_import_sg_table()? Exporting should
> work fine since the memory is always readable by CPU.

Oh, I think you still want drm_gem_prime_import()'s path for "I'm
importing an fd from this same driver to into another process".  So,
yeah, have our .import_sg_table hook throw -EINVAL if called on the
device memory platform, and otherwise call down to
drm_gem_cma_prime_import_sg_table().
diff mbox

Patch

diff --git a/drivers/gpu/drm/pl111/pl111_drv.c b/drivers/gpu/drm/pl111/pl111_drv.c
index 4621259d5387..bc57c15d9fe4 100644
--- a/drivers/gpu/drm/pl111/pl111_drv.c
+++ b/drivers/gpu/drm/pl111/pl111_drv.c
@@ -60,6 +60,7 @@ 
 #include <linux/slab.h>
 #include <linux/of.h>
 #include <linux/of_graph.h>
+#include <linux/of_reserved_mem.h>
 
 #include <drm/drmP.h>
 #include <drm/drm_atomic_helper.h>
@@ -257,6 +258,10 @@  static int pl111_amba_probe(struct amba_device *amba_dev,
 	drm->dev_private = priv;
 	priv->variant = variant;
 
+	ret = of_reserved_mem_device_init(dev);
+	if (!ret)
+		dev_info(dev, "using device-specific reserved memory\n");
+
 	if (of_property_read_u32(dev->of_node, "max-memory-bandwidth",
 				 &priv->memory_bw)) {
 		dev_info(dev, "no max memory bandwidth specified, assume unlimited\n");
@@ -275,7 +280,8 @@  static int pl111_amba_probe(struct amba_device *amba_dev,
 	priv->regs = devm_ioremap_resource(dev, &amba_dev->res);
 	if (IS_ERR(priv->regs)) {
 		dev_err(dev, "%s failed mmio\n", __func__);
-		return PTR_ERR(priv->regs);
+		ret = PTR_ERR(priv->regs);
+		goto mem_rel;
 	}
 
 	/* This may override some variant settings */
@@ -305,11 +311,15 @@  static int pl111_amba_probe(struct amba_device *amba_dev,
 
 dev_unref:
 	drm_dev_unref(drm);
+mem_rel:
+	of_reserved_mem_device_release(dev);
+
 	return ret;
 }
 
 static int pl111_amba_remove(struct amba_device *amba_dev)
 {
+	struct device *dev = &amba_dev->dev;
 	struct drm_device *drm = amba_get_drvdata(amba_dev);
 	struct pl111_drm_dev_private *priv = drm->dev_private;
 
@@ -319,6 +329,7 @@  static int pl111_amba_remove(struct amba_device *amba_dev)
 		drm_panel_bridge_remove(priv->bridge);
 	drm_mode_config_cleanup(drm);
 	drm_dev_unref(drm);
+	of_reserved_mem_device_release(dev);
 
 	return 0;
 }