diff mbox series

[libdrm,v3] tests/modetest: Add atomic support

Message ID 20180725140016.12921-1-benjamin.gaignard@linaro.org (mailing list archive)
State New, archived
Headers show
Series [libdrm,v3] tests/modetest: Add atomic support | expand

Commit Message

Benjamin Gaignard July 25, 2018, 2 p.m. UTC
If "-a" option is set this make modetest use atomic API instead
of legacy API.

Test the frame rate ("-v") it does a loop and swap between two
framebuffer for each active planes.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
---

version 3:
- merge atomic code into modetest itself
- do not change build systems

version 2 :
- make modetest_atomic compile with meson and Android

version 1:
- add dedicated modetest_atomic tool to test atomic API

 tests/modetest/modetest.c | 349 ++++++++++++++++++++++++++++++++++++++++++----
 1 file changed, 321 insertions(+), 28 deletions(-)

Comments

Benjamin Gaignard Aug. 6, 2018, 7:17 a.m. UTC | #1
2018-07-25 16:00 GMT+02:00 Benjamin Gaignard <benjamin.gaignard@linaro.org>:
> If "-a" option is set this make modetest use atomic API instead
> of legacy API.
>
> Test the frame rate ("-v") it does a loop and swap between two
> framebuffer for each active planes.
>
> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
> ---
>
> version 3:
> - merge atomic code into modetest itself
> - do not change build systems

Gentle ping to help me to progress in this topic.
Thanks

Benjamin

>
> version 2 :
> - make modetest_atomic compile with meson and Android
>
> version 1:
> - add dedicated modetest_atomic tool to test atomic API
>
>  tests/modetest/modetest.c | 349 ++++++++++++++++++++++++++++++++++++++++++----
>  1 file changed, 321 insertions(+), 28 deletions(-)
>
> diff --git a/tests/modetest/modetest.c b/tests/modetest/modetest.c
> index 62957d84..975dcbcd 100644
> --- a/tests/modetest/modetest.c
> +++ b/tests/modetest/modetest.c
> @@ -119,6 +119,9 @@ struct device {
>                 struct bo *bo;
>                 struct bo *cursor_bo;
>         } mode;
> +
> +       int use_atomic;
> +       drmModeAtomicReq *req;
>  };
>
>  static inline int64_t U642I64(uint64_t val)
> @@ -805,7 +808,9 @@ struct plane_arg {
>         uint32_t w, h;
>         double scale;
>         unsigned int fb_id;
> +       unsigned int old_fb_id;
>         struct bo *bo;
> +       struct bo *old_bo;
>         char format_str[5]; /* need to leave room for terminating \0 */
>         unsigned int fourcc;
>  };
> @@ -999,8 +1004,12 @@ static void set_property(struct device *dev, struct property_arg *p)
>
>         p->prop_id = props->props[i];
>
> -       ret = drmModeObjectSetProperty(dev->fd, p->obj_id, p->obj_type,
> -                                      p->prop_id, p->value);
> +       if (!dev->use_atomic)
> +               ret = drmModeObjectSetProperty(dev->fd, p->obj_id, p->obj_type,
> +                                                                          p->prop_id, p->value);
> +       else
> +               ret = drmModeAtomicAddProperty(dev->req, p->obj_id, p->prop_id, p->value);
> +
>         if (ret < 0)
>                 fprintf(stderr, "failed to set %s %i property %s to %" PRIu64 ": %s\n",
>                         obj_type, p->obj_id, p->name, p->value, strerror(errno));
> @@ -1049,6 +1058,94 @@ static bool format_support(const drmModePlanePtr ovr, uint32_t fmt)
>         return false;
>  }
>
> +static void add_property(struct device *dev, uint32_t obj_id,
> +                              const char *name, uint64_t value)
> +{
> +       struct property_arg p;
> +
> +       p.obj_id = obj_id;
> +       strcpy(p.name, name);
> +       p.value = value;
> +
> +       set_property(dev, &p);
> +}
> +
> +static int atomic_set_plane(struct device *dev, struct plane_arg *p,
> +                                                       int pattern, bool update)
> +{
> +       uint32_t handles[4] = {0}, pitches[4] = {0}, offsets[4] = {0};
> +       struct bo *plane_bo;
> +       int crtc_x, crtc_y, crtc_w, crtc_h;
> +       struct crtc *crtc = NULL;
> +       unsigned int i;
> +       unsigned int old_fb_id;
> +
> +       /* Find an unused plane which can be connected to our CRTC. Find the
> +        * CRTC index first, then iterate over available planes.
> +        */
> +       for (i = 0; i < (unsigned int)dev->resources->res->count_crtcs; i++) {
> +               if (p->crtc_id == dev->resources->res->crtcs[i]) {
> +                       crtc = &dev->resources->crtcs[i];
> +                       break;
> +               }
> +       }
> +
> +       if (!crtc) {
> +               fprintf(stderr, "CRTC %u not found\n", p->crtc_id);
> +               return -1;
> +       }
> +
> +       if (!update)
> +               fprintf(stderr, "testing %dx%d@%s on plane %u, crtc %u\n",
> +                       p->w, p->h, p->format_str, p->plane_id, p->crtc_id);
> +
> +       plane_bo = p->old_bo;
> +       p->old_bo = p->bo;
> +
> +       if (!plane_bo) {
> +               plane_bo = bo_create(dev->fd, p->fourcc, p->w, p->h,
> +                                    handles, pitches, offsets, pattern);
> +
> +               if (plane_bo == NULL)
> +                       return -1;
> +
> +               if (drmModeAddFB2(dev->fd, p->w, p->h, p->fourcc,
> +                       handles, pitches, offsets, &p->fb_id, 0)) {
> +                       fprintf(stderr, "failed to add fb: %s\n", strerror(errno));
> +                       return -1;
> +               }
> +       }
> +
> +       p->bo = plane_bo;
> +
> +       old_fb_id = p->fb_id;
> +       p->old_fb_id = old_fb_id;
> +
> +       crtc_w = p->w * p->scale;
> +       crtc_h = p->h * p->scale;
> +       if (!p->has_position) {
> +               /* Default to the middle of the screen */
> +               crtc_x = (crtc->mode->hdisplay - crtc_w) / 2;
> +               crtc_y = (crtc->mode->vdisplay - crtc_h) / 2;
> +       } else {
> +               crtc_x = p->x;
> +               crtc_y = p->y;
> +       }
> +
> +       add_property(dev, p->plane_id, "FB_ID", p->fb_id);
> +       add_property(dev, p->plane_id, "CRTC_ID", p->crtc_id);
> +       add_property(dev, p->plane_id, "SRC_X", 0);
> +       add_property(dev, p->plane_id, "SRC_Y", 0);
> +       add_property(dev, p->plane_id, "SRC_W", p->w << 16);
> +       add_property(dev, p->plane_id, "SRC_H", p->h << 16);
> +       add_property(dev, p->plane_id, "CRTC_X", crtc_x);
> +       add_property(dev, p->plane_id, "CRTC_Y", crtc_y);
> +       add_property(dev, p->plane_id, "CRTC_W", crtc_w);
> +       add_property(dev, p->plane_id, "CRTC_H", crtc_h);
> +
> +       return 0;
> +}
> +
>  static int set_plane(struct device *dev, struct plane_arg *p)
>  {
>         drmModePlane *ovr;
> @@ -1145,6 +1242,64 @@ static int set_plane(struct device *dev, struct plane_arg *p)
>         return 0;
>  }
>
> +static void atomic_set_planes(struct device *dev, struct plane_arg *p,
> +                             unsigned int count, bool update)
> +{
> +       unsigned int i, pattern = UTIL_PATTERN_SMPTE;
> +
> +       /* set up planes */
> +       for (i = 0; i < count; i++) {
> +               if (i > 0)
> +                       pattern = UTIL_PATTERN_TILES;
> +
> +               if (atomic_set_plane(dev, &p[i], pattern, update))
> +                       return;
> +       }
> +}
> +
> +static void atomic_clear_planes(struct device *dev, struct plane_arg *p, unsigned int count)
> +{
> +       unsigned int i;
> +
> +       for (i = 0; i < count; i++) {
> +               add_property(dev, p[i].plane_id, "FB_ID", 0);
> +               add_property(dev, p[i].plane_id, "CRTC_ID", 0);
> +               add_property(dev, p[i].plane_id, "SRC_X", 0);
> +               add_property(dev, p[i].plane_id, "SRC_Y", 0);
> +               add_property(dev, p[i].plane_id, "SRC_W", 0);
> +               add_property(dev, p[i].plane_id, "SRC_H", 0);
> +               add_property(dev, p[i].plane_id, "CRTC_X", 0);
> +               add_property(dev, p[i].plane_id, "CRTC_Y", 0);
> +               add_property(dev, p[i].plane_id, "CRTC_W", 0);
> +               add_property(dev, p[i].plane_id, "CRTC_H", 0);
> +       }
> +}
> +
> +static void atomic_clear_FB(struct device *dev, struct plane_arg *p, unsigned int count)
> +{
> +       unsigned int i;
> +
> +       for (i = 0; i < count; i++) {
> +               if (p[i].fb_id) {
> +                       drmModeRmFB(dev->fd, p[i].fb_id);
> +                       p[i].fb_id = 0;
> +               }
> +               if (p[i].old_fb_id) {
> +                       drmModeRmFB(dev->fd, p[i].old_fb_id);
> +                       p[i].old_fb_id = 0;
> +               }
> +               if (p[i].bo) {
> +                       bo_destroy(p[i].bo);
> +                       p[i].bo = NULL;
> +               }
> +               if (p[i].old_bo) {
> +                       bo_destroy(p[i].old_bo);
> +                       p[i].old_bo = NULL;
> +               }
> +
> +       }
> +}
> +
>  static void clear_planes(struct device *dev, struct plane_arg *p, unsigned int count)
>  {
>         unsigned int i;
> @@ -1157,6 +1312,59 @@ static void clear_planes(struct device *dev, struct plane_arg *p, unsigned int c
>         }
>  }
>
> +static void atomic_set_mode(struct device *dev, struct pipe_arg *pipes, unsigned int count)
> +{
> +       unsigned int i;
> +       unsigned int j;
> +       int ret;
> +
> +       for (i = 0; i < count; i++) {
> +               struct pipe_arg *pipe = &pipes[i];
> +
> +               ret = pipe_find_crtc_and_mode(dev, pipe);
> +               if (ret < 0)
> +                       continue;
> +       }
> +
> +       for (i = 0; i < count; i++) {
> +               struct pipe_arg *pipe = &pipes[i];
> +               uint32_t blob_id;
> +
> +               if (pipe->mode == NULL)
> +                       continue;
> +
> +               printf("setting mode %s-%dHz@%s on connectors ",
> +                      pipe->mode_str, pipe->mode->vrefresh, pipe->format_str);
> +               for (j = 0; j < pipe->num_cons; ++j) {
> +                       printf("%s, ", pipe->cons[j]);
> +                       add_property(dev, pipe->con_ids[j], "CRTC_ID", pipe->crtc->crtc->crtc_id);
> +               }
> +               printf("crtc %d\n", pipe->crtc->crtc->crtc_id);
> +
> +               drmModeCreatePropertyBlob(dev->fd, pipe->mode, sizeof(*pipe->mode), &blob_id);
> +               add_property(dev, pipe->crtc->crtc->crtc_id, "MODE_ID", blob_id);
> +               add_property(dev, pipe->crtc->crtc->crtc_id, "ACTIVE", 1);
> +       }
> +}
> +
> +static void atomic_clear_mode(struct device *dev, struct pipe_arg *pipes, unsigned int count)
> +{
> +       unsigned int i;
> +       unsigned int j;
> +
> +       for (i = 0; i < count; i++) {
> +               struct pipe_arg *pipe = &pipes[i];
> +
> +               if (pipe->mode == NULL)
> +                       continue;
> +
> +               for (j = 0; j < pipe->num_cons; ++j)
> +                       add_property(dev, pipe->con_ids[j], "CRTC_ID",0);
> +
> +               add_property(dev, pipe->crtc->crtc->crtc_id, "MODE_ID", 0);
> +               add_property(dev, pipe->crtc->crtc->crtc_id, "ACTIVE", 0);
> +       }
> +}
>
>  static void set_mode(struct device *dev, struct pipe_arg *pipes, unsigned int count)
>  {
> @@ -1532,7 +1740,7 @@ static int parse_property(struct property_arg *p, const char *arg)
>
>  static void usage(char *name)
>  {
> -       fprintf(stderr, "usage: %s [-cDdefMPpsCvw]\n", name);
> +       fprintf(stderr, "usage: %s [-acDdefMPpsCvw]\n", name);
>
>         fprintf(stderr, "\n Query options:\n\n");
>         fprintf(stderr, "\t-c\tlist connectors\n");
> @@ -1546,6 +1754,7 @@ static void usage(char *name)
>         fprintf(stderr, "\t-C\ttest hw cursor\n");
>         fprintf(stderr, "\t-v\ttest vsynced page flipping\n");
>         fprintf(stderr, "\t-w <obj_id>:<prop_name>:<value>\tset property\n");
> +       fprintf(stderr, "\t-a \tuse atomic API\n");
>
>         fprintf(stderr, "\n Generic options:\n\n");
>         fprintf(stderr, "\t-d\tdrop master after mode set\n");
> @@ -1609,7 +1818,7 @@ static int pipe_resolve_connectors(struct device *dev, struct pipe_arg *pipe)
>         return 0;
>  }
>
> -static char optstr[] = "cdD:efM:P:ps:Cvw:";
> +static char optstr[] = "acdD:efM:P:ps:Cvw:";
>
>  int main(int argc, char **argv)
>  {
> @@ -1620,6 +1829,7 @@ int main(int argc, char **argv)
>         int drop_master = 0;
>         int test_vsync = 0;
>         int test_cursor = 0;
> +       int use_atomic = 0;
>         char *device = NULL;
>         char *module = NULL;
>         unsigned int i;
> @@ -1638,6 +1848,9 @@ int main(int argc, char **argv)
>                 args++;
>
>                 switch (c) {
> +               case 'a':
> +                       use_atomic = 1;
> +                       break;
>                 case 'c':
>                         connectors = 1;
>                         break;
> @@ -1717,13 +1930,22 @@ int main(int argc, char **argv)
>                 }
>         }
>
> -       if (!args)
> +       if (!args || (args == 1 && use_atomic))
>                 encoders = connectors = crtcs = planes = framebuffers = 1;
>
>         dev.fd = util_open(device, module);
>         if (dev.fd < 0)
>                 return -1;
>
> +       ret = drmSetClientCap(dev.fd, DRM_CLIENT_CAP_ATOMIC, 1);
> +       if (ret && use_atomic) {
> +               fprintf(stderr, "no atomic modesetting support: %s\n", strerror(errno));
> +               drmClose(dev.fd);
> +               return -1;
> +       }
> +
> +       dev.use_atomic = use_atomic;
> +
>         if (test_vsync && !page_flipping_supported()) {
>                 fprintf(stderr, "page flipping not supported by drm.\n");
>                 return -1;
> @@ -1764,40 +1986,111 @@ int main(int argc, char **argv)
>         for (i = 0; i < prop_count; ++i)
>                 set_property(&dev, &prop_args[i]);
>
> -       if (count || plane_count) {
> -               uint64_t cap = 0;
> +       if (dev.use_atomic) {
> +               dev.req = drmModeAtomicAlloc();
>
> -               ret = drmGetCap(dev.fd, DRM_CAP_DUMB_BUFFER, &cap);
> -               if (ret || cap == 0) {
> -                       fprintf(stderr, "driver doesn't support the dumb buffer API\n");
> -                       return 1;
> +               if (count && plane_count) {
> +                       uint64_t cap = 0;
> +
> +                       ret = drmGetCap(dev.fd, DRM_CAP_DUMB_BUFFER, &cap);
> +                       if (ret || cap == 0) {
> +                               fprintf(stderr, "driver doesn't support the dumb buffer API\n");
> +                               return 1;
> +                       }
> +
> +                       atomic_set_mode(&dev, pipe_args, count);
> +                       atomic_set_planes(&dev, plane_args, plane_count, false);
> +
> +                       ret = drmModeAtomicCommit(dev.fd, dev.req, DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
> +                       if (ret) {
> +                               fprintf(stderr, "Atomic Commit failed [1]\n");
> +                               return 1;
> +                       }
> +
> +                       gettimeofday(&pipe_args->start, NULL);
> +                       pipe_args->swap_count = 0;
> +
> +                       while (test_vsync) {
> +                               drmModeAtomicFree(dev.req);
> +                               dev.req = drmModeAtomicAlloc();
> +                               atomic_set_planes(&dev, plane_args, plane_count, true);
> +
> +                               ret = drmModeAtomicCommit(dev.fd, dev.req, DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
> +                               if (ret) {
> +                                       fprintf(stderr, "Atomic Commit failed [2]\n");
> +                                       return 1;
> +                               }
> +
> +                               pipe_args->swap_count++;
> +                               if (pipe_args->swap_count == 60) {
> +                                       struct timeval end;
> +                                       double t;
> +
> +                                       gettimeofday(&end, NULL);
> +                                       t = end.tv_sec + end.tv_usec * 1e-6 -
> +                                   (pipe_args->start.tv_sec + pipe_args->start.tv_usec * 1e-6);
> +                                       fprintf(stderr, "freq: %.02fHz\n", pipe_args->swap_count / t);
> +                                       pipe_args->swap_count = 0;
> +                                       pipe_args->start = end;
> +                               }
> +                       }
> +
> +                       if (drop_master)
> +                               drmDropMaster(dev.fd);
> +
> +                       getchar();
> +
> +                       drmModeAtomicFree(dev.req);
> +                       dev.req = drmModeAtomicAlloc();
> +
> +                       atomic_clear_mode(&dev, pipe_args, count);
> +                       atomic_clear_planes(&dev, plane_args, plane_count);
> +                       ret = drmModeAtomicCommit(dev.fd, dev.req, DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
> +                       if (ret) {
> +                               fprintf(stderr, "Atomic Commit failed\n");
> +                               return 1;
> +                       }
> +
> +                       atomic_clear_FB(&dev, plane_args, plane_count);
>                 }
>
> -               if (count)
> -                       set_mode(&dev, pipe_args, count);
> +               drmModeAtomicFree(dev.req);
> +       } else {
> +               if (count || plane_count) {
> +                       uint64_t cap = 0;
>
> -               if (plane_count)
> -                       set_planes(&dev, plane_args, plane_count);
> +                       ret = drmGetCap(dev.fd, DRM_CAP_DUMB_BUFFER, &cap);
> +                       if (ret || cap == 0) {
> +                               fprintf(stderr, "driver doesn't support the dumb buffer API\n");
> +                               return 1;
> +                       }
> +
> +                       if (count)
> +                               set_mode(&dev, pipe_args, count);
>
> -               if (test_cursor)
> -                       set_cursors(&dev, pipe_args, count);
> +                       if (plane_count)
> +                               set_planes(&dev, plane_args, plane_count);
>
> -               if (test_vsync)
> -                       test_page_flip(&dev, pipe_args, count);
> +                       if (test_cursor)
> +                               set_cursors(&dev, pipe_args, count);
>
> -               if (drop_master)
> -                       drmDropMaster(dev.fd);
> +                       if (test_vsync)
> +                               test_page_flip(&dev, pipe_args, count);
>
> -               getchar();
> +                       if (drop_master)
> +                               drmDropMaster(dev.fd);
>
> -               if (test_cursor)
> -                       clear_cursors(&dev);
> +                       getchar();
>
> -               if (plane_count)
> -                       clear_planes(&dev, plane_args, plane_count);
> +                       if (test_cursor)
> +                               clear_cursors(&dev);
>
> -               if (count)
> -                       clear_mode(&dev);
> +                       if (plane_count)
> +                               clear_planes(&dev, plane_args, plane_count);
> +
> +                       if (count)
> +                               clear_mode(&dev);
> +               }
>         }
>
>         free_resources(dev.resources);
> --
> 2.15.0
>
Emil Velikov Aug. 7, 2018, 1:46 p.m. UTC | #2
On 25 July 2018 at 15:00, Benjamin Gaignard
<benjamin.gaignard@linaro.org> wrote:
> If "-a" option is set this make modetest use atomic API instead
> of legacy API.
>
> Test the frame rate ("-v") it does a loop and swap between two
> framebuffer for each active planes.
>
> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
> ---
>
> version 3:
> - merge atomic code into modetest itself
> - do not change build systems
>
Thanks for folding this, instead of the duplication.

Patch looks good. Any nitpicks can be tweaked at a later stage.
Rb and pushed to master.

Aside: libdrm following X/Wayland in that it lacks contributor/push access docs.
Might be worth, copying the Mesa ones and adding a doc in-tree.

Thanks
Emil
Daniel Stone Aug. 7, 2018, 1:53 p.m. UTC | #3
Hi Emil,
This is off-topic for the list, but ...

On Tue, 7 Aug 2018 at 14:46, Emil Velikov <emil.l.velikov@gmail.com> wrote:
> Aside: libdrm following X/Wayland in that it lacks contributor/push access docs.
> Might be worth, copying the Mesa ones and adding a doc in-tree.

https://gitlab.freedesktop.org/wayland/wayland/blob/master/CONTRIBUTING.md
https://gitlab.freedesktop.org/wayland/weston/blob/master/CONTRIBUTING.md

xserver also has this, linked from its README:
https://www.x.org/wiki/Development/Documentation/SubmittingPatches

Is there anything in those documents you were looking for but wasn't there?

Cheers,
Daniel
Emil Velikov Aug. 7, 2018, 2:15 p.m. UTC | #4
On 7 August 2018 at 14:53, Daniel Stone <daniel@fooishbar.org> wrote:
> Hi Emil,
> This is off-topic for the list, but ...
>
> On Tue, 7 Aug 2018 at 14:46, Emil Velikov <emil.l.velikov@gmail.com> wrote:
>> Aside: libdrm following X/Wayland in that it lacks contributor/push access docs.
>> Might be worth, copying the Mesa ones and adding a doc in-tree.
>
> https://gitlab.freedesktop.org/wayland/wayland/blob/master/CONTRIBUTING.md
> https://gitlab.freedesktop.org/wayland/weston/blob/master/CONTRIBUTING.md
>
Right, seems like I was sleeping recently. Did not see the "commit
rights" section landing ~1month ago.

On the other hand, [1] was added a few years ago ;-)
And was a well know well before that.

> xserver also has this, linked from its README:
> https://www.x.org/wiki/Development/Documentation/SubmittingPatches
>
> Is there anything in those documents you were looking for but wasn't there?
>
This page is severely out of date. This one talks about maintainers, a
concept which hasn't been applied in years.

HTH
Emil

[1] https://www.mesa3d.org/repository.html#developer
diff mbox series

Patch

diff --git a/tests/modetest/modetest.c b/tests/modetest/modetest.c
index 62957d84..975dcbcd 100644
--- a/tests/modetest/modetest.c
+++ b/tests/modetest/modetest.c
@@ -119,6 +119,9 @@  struct device {
 		struct bo *bo;
 		struct bo *cursor_bo;
 	} mode;
+
+	int use_atomic;
+	drmModeAtomicReq *req;
 };
 
 static inline int64_t U642I64(uint64_t val)
@@ -805,7 +808,9 @@  struct plane_arg {
 	uint32_t w, h;
 	double scale;
 	unsigned int fb_id;
+	unsigned int old_fb_id;
 	struct bo *bo;
+	struct bo *old_bo;
 	char format_str[5]; /* need to leave room for terminating \0 */
 	unsigned int fourcc;
 };
@@ -999,8 +1004,12 @@  static void set_property(struct device *dev, struct property_arg *p)
 
 	p->prop_id = props->props[i];
 
-	ret = drmModeObjectSetProperty(dev->fd, p->obj_id, p->obj_type,
-				       p->prop_id, p->value);
+	if (!dev->use_atomic)
+		ret = drmModeObjectSetProperty(dev->fd, p->obj_id, p->obj_type,
+									   p->prop_id, p->value);
+	else
+		ret = drmModeAtomicAddProperty(dev->req, p->obj_id, p->prop_id, p->value);
+
 	if (ret < 0)
 		fprintf(stderr, "failed to set %s %i property %s to %" PRIu64 ": %s\n",
 			obj_type, p->obj_id, p->name, p->value, strerror(errno));
@@ -1049,6 +1058,94 @@  static bool format_support(const drmModePlanePtr ovr, uint32_t fmt)
 	return false;
 }
 
+static void add_property(struct device *dev, uint32_t obj_id,
+			       const char *name, uint64_t value)
+{
+	struct property_arg p;
+
+	p.obj_id = obj_id;
+	strcpy(p.name, name);
+	p.value = value;
+
+	set_property(dev, &p);
+}
+
+static int atomic_set_plane(struct device *dev, struct plane_arg *p,
+							int pattern, bool update)
+{
+	uint32_t handles[4] = {0}, pitches[4] = {0}, offsets[4] = {0};
+	struct bo *plane_bo;
+	int crtc_x, crtc_y, crtc_w, crtc_h;
+	struct crtc *crtc = NULL;
+	unsigned int i;
+	unsigned int old_fb_id;
+
+	/* Find an unused plane which can be connected to our CRTC. Find the
+	 * CRTC index first, then iterate over available planes.
+	 */
+	for (i = 0; i < (unsigned int)dev->resources->res->count_crtcs; i++) {
+		if (p->crtc_id == dev->resources->res->crtcs[i]) {
+			crtc = &dev->resources->crtcs[i];
+			break;
+		}
+	}
+
+	if (!crtc) {
+		fprintf(stderr, "CRTC %u not found\n", p->crtc_id);
+		return -1;
+	}
+
+	if (!update)
+		fprintf(stderr, "testing %dx%d@%s on plane %u, crtc %u\n",
+			p->w, p->h, p->format_str, p->plane_id, p->crtc_id);
+
+	plane_bo = p->old_bo;
+	p->old_bo = p->bo;
+
+	if (!plane_bo) {
+		plane_bo = bo_create(dev->fd, p->fourcc, p->w, p->h,
+				     handles, pitches, offsets, pattern);
+
+		if (plane_bo == NULL)
+			return -1;
+
+		if (drmModeAddFB2(dev->fd, p->w, p->h, p->fourcc,
+			handles, pitches, offsets, &p->fb_id, 0)) {
+			fprintf(stderr, "failed to add fb: %s\n", strerror(errno));
+			return -1;
+		}
+	}
+
+	p->bo = plane_bo;
+
+	old_fb_id = p->fb_id;
+	p->old_fb_id = old_fb_id;
+
+	crtc_w = p->w * p->scale;
+	crtc_h = p->h * p->scale;
+	if (!p->has_position) {
+		/* Default to the middle of the screen */
+		crtc_x = (crtc->mode->hdisplay - crtc_w) / 2;
+		crtc_y = (crtc->mode->vdisplay - crtc_h) / 2;
+	} else {
+		crtc_x = p->x;
+		crtc_y = p->y;
+	}
+
+	add_property(dev, p->plane_id, "FB_ID", p->fb_id);
+	add_property(dev, p->plane_id, "CRTC_ID", p->crtc_id);
+	add_property(dev, p->plane_id, "SRC_X", 0);
+	add_property(dev, p->plane_id, "SRC_Y", 0);
+	add_property(dev, p->plane_id, "SRC_W", p->w << 16);
+	add_property(dev, p->plane_id, "SRC_H", p->h << 16);
+	add_property(dev, p->plane_id, "CRTC_X", crtc_x);
+	add_property(dev, p->plane_id, "CRTC_Y", crtc_y);
+	add_property(dev, p->plane_id, "CRTC_W", crtc_w);
+	add_property(dev, p->plane_id, "CRTC_H", crtc_h);
+
+	return 0;
+}
+
 static int set_plane(struct device *dev, struct plane_arg *p)
 {
 	drmModePlane *ovr;
@@ -1145,6 +1242,64 @@  static int set_plane(struct device *dev, struct plane_arg *p)
 	return 0;
 }
 
+static void atomic_set_planes(struct device *dev, struct plane_arg *p,
+			      unsigned int count, bool update)
+{
+	unsigned int i, pattern = UTIL_PATTERN_SMPTE;
+
+	/* set up planes */
+	for (i = 0; i < count; i++) {
+		if (i > 0)
+			pattern = UTIL_PATTERN_TILES;
+
+		if (atomic_set_plane(dev, &p[i], pattern, update))
+			return;
+	}
+}
+
+static void atomic_clear_planes(struct device *dev, struct plane_arg *p, unsigned int count)
+{
+	unsigned int i;
+
+	for (i = 0; i < count; i++) {
+		add_property(dev, p[i].plane_id, "FB_ID", 0);
+		add_property(dev, p[i].plane_id, "CRTC_ID", 0);
+		add_property(dev, p[i].plane_id, "SRC_X", 0);
+		add_property(dev, p[i].plane_id, "SRC_Y", 0);
+		add_property(dev, p[i].plane_id, "SRC_W", 0);
+		add_property(dev, p[i].plane_id, "SRC_H", 0);
+		add_property(dev, p[i].plane_id, "CRTC_X", 0);
+		add_property(dev, p[i].plane_id, "CRTC_Y", 0);
+		add_property(dev, p[i].plane_id, "CRTC_W", 0);
+		add_property(dev, p[i].plane_id, "CRTC_H", 0);
+	}
+}
+
+static void atomic_clear_FB(struct device *dev, struct plane_arg *p, unsigned int count)
+{
+	unsigned int i;
+
+	for (i = 0; i < count; i++) {
+		if (p[i].fb_id) {
+			drmModeRmFB(dev->fd, p[i].fb_id);
+			p[i].fb_id = 0;
+		}
+		if (p[i].old_fb_id) {
+			drmModeRmFB(dev->fd, p[i].old_fb_id);
+			p[i].old_fb_id = 0;
+		}
+		if (p[i].bo) {
+			bo_destroy(p[i].bo);
+			p[i].bo = NULL;
+		}
+		if (p[i].old_bo) {
+			bo_destroy(p[i].old_bo);
+			p[i].old_bo = NULL;
+		}
+
+	}
+}
+
 static void clear_planes(struct device *dev, struct plane_arg *p, unsigned int count)
 {
 	unsigned int i;
@@ -1157,6 +1312,59 @@  static void clear_planes(struct device *dev, struct plane_arg *p, unsigned int c
 	}
 }
 
+static void atomic_set_mode(struct device *dev, struct pipe_arg *pipes, unsigned int count)
+{
+	unsigned int i;
+	unsigned int j;
+	int ret;
+
+	for (i = 0; i < count; i++) {
+		struct pipe_arg *pipe = &pipes[i];
+
+		ret = pipe_find_crtc_and_mode(dev, pipe);
+		if (ret < 0)
+			continue;
+	}
+
+	for (i = 0; i < count; i++) {
+		struct pipe_arg *pipe = &pipes[i];
+		uint32_t blob_id;
+
+		if (pipe->mode == NULL)
+			continue;
+
+		printf("setting mode %s-%dHz@%s on connectors ",
+		       pipe->mode_str, pipe->mode->vrefresh, pipe->format_str);
+		for (j = 0; j < pipe->num_cons; ++j) {
+			printf("%s, ", pipe->cons[j]);
+			add_property(dev, pipe->con_ids[j], "CRTC_ID", pipe->crtc->crtc->crtc_id);
+		}
+		printf("crtc %d\n", pipe->crtc->crtc->crtc_id);
+
+		drmModeCreatePropertyBlob(dev->fd, pipe->mode, sizeof(*pipe->mode), &blob_id);
+		add_property(dev, pipe->crtc->crtc->crtc_id, "MODE_ID", blob_id);
+		add_property(dev, pipe->crtc->crtc->crtc_id, "ACTIVE", 1);
+	}
+}
+
+static void atomic_clear_mode(struct device *dev, struct pipe_arg *pipes, unsigned int count)
+{
+	unsigned int i;
+	unsigned int j;
+
+	for (i = 0; i < count; i++) {
+		struct pipe_arg *pipe = &pipes[i];
+
+		if (pipe->mode == NULL)
+			continue;
+
+		for (j = 0; j < pipe->num_cons; ++j)
+			add_property(dev, pipe->con_ids[j], "CRTC_ID",0);
+
+		add_property(dev, pipe->crtc->crtc->crtc_id, "MODE_ID", 0);
+		add_property(dev, pipe->crtc->crtc->crtc_id, "ACTIVE", 0);
+	}
+}
 
 static void set_mode(struct device *dev, struct pipe_arg *pipes, unsigned int count)
 {
@@ -1532,7 +1740,7 @@  static int parse_property(struct property_arg *p, const char *arg)
 
 static void usage(char *name)
 {
-	fprintf(stderr, "usage: %s [-cDdefMPpsCvw]\n", name);
+	fprintf(stderr, "usage: %s [-acDdefMPpsCvw]\n", name);
 
 	fprintf(stderr, "\n Query options:\n\n");
 	fprintf(stderr, "\t-c\tlist connectors\n");
@@ -1546,6 +1754,7 @@  static void usage(char *name)
 	fprintf(stderr, "\t-C\ttest hw cursor\n");
 	fprintf(stderr, "\t-v\ttest vsynced page flipping\n");
 	fprintf(stderr, "\t-w <obj_id>:<prop_name>:<value>\tset property\n");
+	fprintf(stderr, "\t-a \tuse atomic API\n");
 
 	fprintf(stderr, "\n Generic options:\n\n");
 	fprintf(stderr, "\t-d\tdrop master after mode set\n");
@@ -1609,7 +1818,7 @@  static int pipe_resolve_connectors(struct device *dev, struct pipe_arg *pipe)
 	return 0;
 }
 
-static char optstr[] = "cdD:efM:P:ps:Cvw:";
+static char optstr[] = "acdD:efM:P:ps:Cvw:";
 
 int main(int argc, char **argv)
 {
@@ -1620,6 +1829,7 @@  int main(int argc, char **argv)
 	int drop_master = 0;
 	int test_vsync = 0;
 	int test_cursor = 0;
+	int use_atomic = 0;
 	char *device = NULL;
 	char *module = NULL;
 	unsigned int i;
@@ -1638,6 +1848,9 @@  int main(int argc, char **argv)
 		args++;
 
 		switch (c) {
+		case 'a':
+			use_atomic = 1;
+			break;
 		case 'c':
 			connectors = 1;
 			break;
@@ -1717,13 +1930,22 @@  int main(int argc, char **argv)
 		}
 	}
 
-	if (!args)
+	if (!args || (args == 1 && use_atomic))
 		encoders = connectors = crtcs = planes = framebuffers = 1;
 
 	dev.fd = util_open(device, module);
 	if (dev.fd < 0)
 		return -1;
 
+	ret = drmSetClientCap(dev.fd, DRM_CLIENT_CAP_ATOMIC, 1);
+	if (ret && use_atomic) {
+		fprintf(stderr, "no atomic modesetting support: %s\n", strerror(errno));
+		drmClose(dev.fd);
+		return -1;
+	}
+
+	dev.use_atomic = use_atomic;
+
 	if (test_vsync && !page_flipping_supported()) {
 		fprintf(stderr, "page flipping not supported by drm.\n");
 		return -1;
@@ -1764,40 +1986,111 @@  int main(int argc, char **argv)
 	for (i = 0; i < prop_count; ++i)
 		set_property(&dev, &prop_args[i]);
 
-	if (count || plane_count) {
-		uint64_t cap = 0;
+	if (dev.use_atomic) {
+		dev.req = drmModeAtomicAlloc();
 
-		ret = drmGetCap(dev.fd, DRM_CAP_DUMB_BUFFER, &cap);
-		if (ret || cap == 0) {
-			fprintf(stderr, "driver doesn't support the dumb buffer API\n");
-			return 1;
+		if (count && plane_count) {
+			uint64_t cap = 0;
+
+			ret = drmGetCap(dev.fd, DRM_CAP_DUMB_BUFFER, &cap);
+			if (ret || cap == 0) {
+				fprintf(stderr, "driver doesn't support the dumb buffer API\n");
+				return 1;
+			}
+
+			atomic_set_mode(&dev, pipe_args, count);
+			atomic_set_planes(&dev, plane_args, plane_count, false);
+
+			ret = drmModeAtomicCommit(dev.fd, dev.req, DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
+			if (ret) {
+				fprintf(stderr, "Atomic Commit failed [1]\n");
+				return 1;
+			}
+
+			gettimeofday(&pipe_args->start, NULL);
+			pipe_args->swap_count = 0;
+
+			while (test_vsync) {
+				drmModeAtomicFree(dev.req);
+				dev.req = drmModeAtomicAlloc();
+				atomic_set_planes(&dev, plane_args, plane_count, true);
+
+				ret = drmModeAtomicCommit(dev.fd, dev.req, DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
+				if (ret) {
+					fprintf(stderr, "Atomic Commit failed [2]\n");
+					return 1;
+				}
+
+				pipe_args->swap_count++;
+				if (pipe_args->swap_count == 60) {
+					struct timeval end;
+					double t;
+
+					gettimeofday(&end, NULL);
+					t = end.tv_sec + end.tv_usec * 1e-6 -
+				    (pipe_args->start.tv_sec + pipe_args->start.tv_usec * 1e-6);
+					fprintf(stderr, "freq: %.02fHz\n", pipe_args->swap_count / t);
+					pipe_args->swap_count = 0;
+					pipe_args->start = end;
+				}
+			}
+
+			if (drop_master)
+				drmDropMaster(dev.fd);
+
+			getchar();
+
+			drmModeAtomicFree(dev.req);
+			dev.req = drmModeAtomicAlloc();
+
+			atomic_clear_mode(&dev, pipe_args, count);
+			atomic_clear_planes(&dev, plane_args, plane_count);
+			ret = drmModeAtomicCommit(dev.fd, dev.req, DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
+			if (ret) {
+				fprintf(stderr, "Atomic Commit failed\n");
+				return 1;
+			}
+
+			atomic_clear_FB(&dev, plane_args, plane_count);
 		}
 
-		if (count)
-			set_mode(&dev, pipe_args, count);
+		drmModeAtomicFree(dev.req);
+	} else {
+		if (count || plane_count) {
+			uint64_t cap = 0;
 
-		if (plane_count)
-			set_planes(&dev, plane_args, plane_count);
+			ret = drmGetCap(dev.fd, DRM_CAP_DUMB_BUFFER, &cap);
+			if (ret || cap == 0) {
+				fprintf(stderr, "driver doesn't support the dumb buffer API\n");
+				return 1;
+			}
+
+			if (count)
+				set_mode(&dev, pipe_args, count);
 
-		if (test_cursor)
-			set_cursors(&dev, pipe_args, count);
+			if (plane_count)
+				set_planes(&dev, plane_args, plane_count);
 
-		if (test_vsync)
-			test_page_flip(&dev, pipe_args, count);
+			if (test_cursor)
+				set_cursors(&dev, pipe_args, count);
 
-		if (drop_master)
-			drmDropMaster(dev.fd);
+			if (test_vsync)
+				test_page_flip(&dev, pipe_args, count);
 
-		getchar();
+			if (drop_master)
+				drmDropMaster(dev.fd);
 
-		if (test_cursor)
-			clear_cursors(&dev);
+			getchar();
 
-		if (plane_count)
-			clear_planes(&dev, plane_args, plane_count);
+			if (test_cursor)
+				clear_cursors(&dev);
 
-		if (count)
-			clear_mode(&dev);
+			if (plane_count)
+				clear_planes(&dev, plane_args, plane_count);
+
+			if (count)
+				clear_mode(&dev);
+		}
 	}
 
 	free_resources(dev.resources);