diff mbox series

[06/12] drm/sun4i: sun6i_mipi_dsi: Fix VBP size calculation

Message ID 20180927114850.24565-7-jagan@amarulasolutions.com (mailing list archive)
State New, archived
Headers show
Series drm/sun4i: Allwinner A64 MIPI-DSI support | expand

Commit Message

Jagan Teki Sept. 27, 2018, 11:48 a.m. UTC
According to horizontal and vertical timings are defined
per the diagram from include/drm/drm_modes.h

Back porch = [hv]total - [hv]sync_end

So, update SUN6I_DSI_BASIC_SIZE0_VBP calculation as
mode->vtotal - mode->vsync_end

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Jagan Teki Sept. 27, 2018, 4:20 p.m. UTC | #1
On Thu, Sep 27, 2018 at 8:51 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
>
> On Thu, Sep 27, 2018 at 05:18:44PM +0530, Jagan Teki wrote:
> > According to horizontal and vertical timings are defined
> > per the diagram from include/drm/drm_modes.h
> >
> > Back porch = [hv]total - [hv]sync_end
> >
> > So, update SUN6I_DSI_BASIC_SIZE0_VBP calculation as
> > mode->vtotal - mode->vsync_end
> >
> > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> > ---
> >  drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 4 ++--
> >  1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> > index 1c7e42015645..599284971ab6 100644
> > --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> > +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> > @@ -526,8 +526,8 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi,
> >       regmap_write(dsi->regs, SUN6I_DSI_BASIC_SIZE0_REG,
> >                    SUN6I_DSI_BASIC_SIZE0_VSA(mode->vsync_end -
> >                                              mode->vsync_start) |
> > -                  SUN6I_DSI_BASIC_SIZE0_VBP(mode->vsync_start -
> > -                                            mode->vdisplay));
> > +                  SUN6I_DSI_BASIC_SIZE0_VBP(mode->vtotal -
> > +                                            mode->vsync_end));
>
> Is it purely theoretical, or did you find some source that back that?

VSA is done as per that, sync_end - sync start would give sync time.
VBP also done in BPI-M64-bsp[1] which results back porch existing code
results fron porch.

[1] https://github.com/BPI-SINOVOIP/BPI-M64-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c#L955
Maxime Ripard Sept. 29, 2018, 1:53 p.m. UTC | #2
On Thu, Sep 27, 2018 at 09:50:34PM +0530, Jagan Teki wrote:
> On Thu, Sep 27, 2018 at 8:51 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
> >
> > On Thu, Sep 27, 2018 at 05:18:44PM +0530, Jagan Teki wrote:
> > > According to horizontal and vertical timings are defined
> > > per the diagram from include/drm/drm_modes.h
> > >
> > > Back porch = [hv]total - [hv]sync_end
> > >
> > > So, update SUN6I_DSI_BASIC_SIZE0_VBP calculation as
> > > mode->vtotal - mode->vsync_end
> > >
> > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> > > ---
> > >  drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 4 ++--
> > >  1 file changed, 2 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> > > index 1c7e42015645..599284971ab6 100644
> > > --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> > > +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> > > @@ -526,8 +526,8 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi,
> > >       regmap_write(dsi->regs, SUN6I_DSI_BASIC_SIZE0_REG,
> > >                    SUN6I_DSI_BASIC_SIZE0_VSA(mode->vsync_end -
> > >                                              mode->vsync_start) |
> > > -                  SUN6I_DSI_BASIC_SIZE0_VBP(mode->vsync_start -
> > > -                                            mode->vdisplay));
> > > +                  SUN6I_DSI_BASIC_SIZE0_VBP(mode->vtotal -
> > > +                                            mode->vsync_end));
> >
> > Is it purely theoretical, or did you find some source that back that?
> 
> VSA is done as per that, sync_end - sync start would give sync time.

That's a different register though.

> VBP also done in BPI-M64-bsp[1] which results back porch existing code
> results fron porch.
> 
> [1] https://github.com/BPI-SINOVOIP/BPI-M64-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c#L955

That code does back porch - sync length. Such a calculation doesn't
make much sense as is, but you're saying that it results in the front
porch. Again, what makes you say that?

Maxime
Jagan Teki Oct. 1, 2018, 8:09 a.m. UTC | #3
On Saturday 29 September 2018 07:23 PM, Maxime Ripard wrote:
> On Thu, Sep 27, 2018 at 09:50:34PM +0530, Jagan Teki wrote:
>> On Thu, Sep 27, 2018 at 8:51 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
>>>
>>> On Thu, Sep 27, 2018 at 05:18:44PM +0530, Jagan Teki wrote:
>>>> According to horizontal and vertical timings are defined
>>>> per the diagram from include/drm/drm_modes.h
>>>>
>>>> Back porch = [hv]total - [hv]sync_end
>>>>
>>>> So, update SUN6I_DSI_BASIC_SIZE0_VBP calculation as
>>>> mode->vtotal - mode->vsync_end
>>>>
>>>> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
>>>> ---
>>>>   drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 4 ++--
>>>>   1 file changed, 2 insertions(+), 2 deletions(-)
>>>>
>>>> diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
>>>> index 1c7e42015645..599284971ab6 100644
>>>> --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
>>>> +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
>>>> @@ -526,8 +526,8 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi,
>>>>        regmap_write(dsi->regs, SUN6I_DSI_BASIC_SIZE0_REG,
>>>>                     SUN6I_DSI_BASIC_SIZE0_VSA(mode->vsync_end -
>>>>                                               mode->vsync_start) |
>>>> -                  SUN6I_DSI_BASIC_SIZE0_VBP(mode->vsync_start -
>>>> -                                            mode->vdisplay));
>>>> +                  SUN6I_DSI_BASIC_SIZE0_VBP(mode->vtotal -
>>>> +                                            mode->vsync_end));
>>>
>>> Is it purely theoretical, or did you find some source that back that?
>>
>> VSA is done as per that, sync_end - sync start would give sync time.
> 
> That's a different register though.
> 
>> VBP also done in BPI-M64-bsp[1] which results back porch existing code
>> results fron porch.
>>
>> [1] https://github.com/BPI-SINOVOIP/BPI-M64-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c#L955
> 
> That code does back porch - sync length. Such a calculation doesn't
> make much sense as is, but you're saying that it results in the front
> porch. Again, what makes you say that?

No what code shows is not a real back porch value used for drm it's 
panel back porch value which is a DTS property in BSP.
(I made wrong comment on previous mail as front porch, sorry)

here is the real code

from drivers/video/sunxi/disp2/disp/de/disp_lcd.c
timmings->ver_sync_time= panel_info->lcd_vspw;
timmings->ver_back_porch= panel_info->lcd_vbp-panel_info->lcd_vspw;


u32 vbp = panel->lcd_vbp;
u32 vspw = panel->lcd_vspw;
dsi_dev[sel]->dsi_basic_size0.bits.vbp = vbp-vspw;

So,

dsi_dev[sel]->dsi_basic_size0.bits.vbp = panel->lcd_vbp - panel->lcd_vspw;

=>  timmings->ver_back_porch + panel_info->lcd_vspw - panel_info->lcd_vspw
=>  timmings->ver_back_porch
=>  mode->vtotal - mode->end

VSA, which a proper value.

dsi_dev[sel]->dsi_basic_size0.bits.vsa = vspw;
=> panel_info->lcd_vspw;
=> timmings->ver_sync_time
=> mode->vsync_end - mode->vsync_start
Maxime Ripard Oct. 8, 2018, 3:05 p.m. UTC | #4
On Mon, Oct 01, 2018 at 01:39:17PM +0530, Jagan Teki wrote:
> On Saturday 29 September 2018 07:23 PM, Maxime Ripard wrote:
> > On Thu, Sep 27, 2018 at 09:50:34PM +0530, Jagan Teki wrote:
> > > On Thu, Sep 27, 2018 at 8:51 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
> > > > 
> > > > On Thu, Sep 27, 2018 at 05:18:44PM +0530, Jagan Teki wrote:
> > > > > According to horizontal and vertical timings are defined
> > > > > per the diagram from include/drm/drm_modes.h
> > > > > 
> > > > > Back porch = [hv]total - [hv]sync_end
> > > > > 
> > > > > So, update SUN6I_DSI_BASIC_SIZE0_VBP calculation as
> > > > > mode->vtotal - mode->vsync_end
> > > > > 
> > > > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> > > > > ---
> > > > >   drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 4 ++--
> > > > >   1 file changed, 2 insertions(+), 2 deletions(-)
> > > > > 
> > > > > diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> > > > > index 1c7e42015645..599284971ab6 100644
> > > > > --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> > > > > +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> > > > > @@ -526,8 +526,8 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi,
> > > > >        regmap_write(dsi->regs, SUN6I_DSI_BASIC_SIZE0_REG,
> > > > >                     SUN6I_DSI_BASIC_SIZE0_VSA(mode->vsync_end -
> > > > >                                               mode->vsync_start) |
> > > > > -                  SUN6I_DSI_BASIC_SIZE0_VBP(mode->vsync_start -
> > > > > -                                            mode->vdisplay));
> > > > > +                  SUN6I_DSI_BASIC_SIZE0_VBP(mode->vtotal -
> > > > > +                                            mode->vsync_end));
> > > > 
> > > > Is it purely theoretical, or did you find some source that back that?
> > > 
> > > VSA is done as per that, sync_end - sync start would give sync time.
> > 
> > That's a different register though.
> > 
> > > VBP also done in BPI-M64-bsp[1] which results back porch existing code
> > > results fron porch.
> > > 
> > > [1] https://github.com/BPI-SINOVOIP/BPI-M64-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c#L955
> > 
> > That code does back porch - sync length. Such a calculation doesn't
> > make much sense as is, but you're saying that it results in the front
> > porch. Again, what makes you say that?
> 
> No what code shows is not a real back porch value used for drm it's panel
> back porch value which is a DTS property in BSP.
> (I made wrong comment on previous mail as front porch, sorry)
> 
> here is the real code
> 
> from drivers/video/sunxi/disp2/disp/de/disp_lcd.c
> timmings->ver_sync_time= panel_info->lcd_vspw;
> timmings->ver_back_porch= panel_info->lcd_vbp-panel_info->lcd_vspw;
> 
> 
> u32 vbp = panel->lcd_vbp;
> u32 vspw = panel->lcd_vspw;
> dsi_dev[sel]->dsi_basic_size0.bits.vbp = vbp-vspw;
> 
> So,
> 
> dsi_dev[sel]->dsi_basic_size0.bits.vbp = panel->lcd_vbp - panel->lcd_vspw;
> 
> =>  timmings->ver_back_porch + panel_info->lcd_vspw - panel_info->lcd_vspw
> =>  timmings->ver_back_porch
> =>  mode->vtotal - mode->end
> 
> VSA, which a proper value.
> 
> dsi_dev[sel]->dsi_basic_size0.bits.vsa = vspw;
> => panel_info->lcd_vspw;
> => timmings->ver_sync_time
> => mode->vsync_end - mode->vsync_start

Then please write that in your commit log.

Maxime
diff mbox series

Patch

diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
index 1c7e42015645..599284971ab6 100644
--- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
+++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
@@ -526,8 +526,8 @@  static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi,
 	regmap_write(dsi->regs, SUN6I_DSI_BASIC_SIZE0_REG,
 		     SUN6I_DSI_BASIC_SIZE0_VSA(mode->vsync_end -
 					       mode->vsync_start) |
-		     SUN6I_DSI_BASIC_SIZE0_VBP(mode->vsync_start -
-					       mode->vdisplay));
+		     SUN6I_DSI_BASIC_SIZE0_VBP(mode->vtotal -
+					       mode->vsync_end));
 
 	regmap_write(dsi->regs, SUN6I_DSI_BASIC_SIZE1_REG,
 		     SUN6I_DSI_BASIC_SIZE1_VACT(mode->vdisplay) |