@@ -118,6 +118,95 @@ static void omap_atomic_commit_tail(struct drm_atomic_state *old_state)
priv->dispc_ops->runtime_put(priv->dispc);
}
+static int drm_atomic_state_normalized_zpos_cmp(const void *a, const void *b)
+{
+ const struct drm_plane_state *sa = *(struct drm_plane_state **)a;
+ const struct drm_plane_state *sb = *(struct drm_plane_state **)b;
+
+ if (sa->normalized_zpos != sb->normalized_zpos)
+ return sa->normalized_zpos - sb->normalized_zpos;
+ else
+ return sa->plane->base.id - sb->plane->base.id;
+}
+
+static int omap_atomic_update_normalize_zpos(struct drm_device *dev,
+ struct drm_atomic_state *state)
+{
+ struct drm_crtc *crtc;
+ struct drm_crtc_state *old_state, *new_state;
+ struct drm_plane *plane;
+ int c, i, n, inc;
+ int total_planes = dev->mode_config.num_total_plane;
+ struct drm_plane_state **states;
+ int ret = 0;
+
+ states = kmalloc_array(total_planes, sizeof(*states), GFP_KERNEL);
+ if (!states)
+ return -ENOMEM;
+
+ for_each_oldnew_crtc_in_state(state, crtc, old_state, new_state, c) {
+ if (old_state->plane_mask == new_state->plane_mask &&
+ !new_state->zpos_changed)
+ continue;
+
+ /* Reset plane increment and index value for every crtc */
+ n = 0;
+
+ /*
+ * Normalization process might create new states for planes
+ * which normalized_zpos has to be recalculated.
+ */
+ drm_for_each_plane_mask(plane, dev, new_state->plane_mask) {
+ struct drm_plane_state *plane_state =
+ drm_atomic_get_plane_state(new_state->state,
+ plane);
+ if (IS_ERR(plane_state)) {
+ ret = PTR_ERR(plane_state);
+ goto done;
+ }
+ states[n++] = plane_state;
+ }
+
+ sort(states, n, sizeof(*states),
+ drm_atomic_state_normalized_zpos_cmp, NULL);
+
+ for (i = 0, inc = 0; i < n; i++) {
+ plane = states[i]->plane;
+
+ states[i]->normalized_zpos = i + inc;
+ DRM_DEBUG_ATOMIC("[PLANE:%d:%s] updated normalized zpos value %d\n",
+ plane->base.id, plane->name,
+ states[i]->normalized_zpos);
+
+ if (is_omap_plane_dual_overlay(states[i]))
+ inc++;
+ }
+ new_state->zpos_changed = true;
+ }
+
+done:
+ kfree(states);
+ return ret;
+}
+
+static int omap_atomic_check(struct drm_device *dev,
+ struct drm_atomic_state *state)
+{
+ int ret;
+
+ ret = drm_atomic_helper_check(dev, state);
+ if (ret)
+ return ret;
+
+ if (dev->mode_config.normalize_zpos) {
+ ret = omap_atomic_update_normalize_zpos(dev, state);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
static const struct drm_mode_config_helper_funcs omap_mode_config_helper_funcs = {
.atomic_commit_tail = omap_atomic_commit_tail,
};
@@ -125,7 +214,7 @@ static const struct drm_mode_config_helper_funcs omap_mode_config_helper_funcs =
static const struct drm_mode_config_funcs omap_mode_config_funcs = {
.fb_create = omap_framebuffer_create,
.output_poll_changed = drm_fb_helper_output_poll_changed,
- .atomic_check = drm_atomic_helper_check,
+ .atomic_check = omap_atomic_check,
.atomic_commit = drm_atomic_helper_commit,
};
@@ -123,7 +123,9 @@ static u32 drm_rotation_to_tiler(unsigned int drm_rot)
/* update ovl info for scanout, handles cases of multi-planar fb's, etc.
*/
void omap_framebuffer_update_scanout(struct drm_framebuffer *fb,
- struct drm_plane_state *state, struct omap_overlay_info *info)
+ struct drm_plane_state *state,
+ struct omap_overlay_info *info,
+ struct omap_overlay_info *r_info)
{
struct omap_framebuffer *omap_fb = to_omap_framebuffer(fb);
const struct drm_format_info *format = omap_fb->format;
@@ -213,6 +215,35 @@ void omap_framebuffer_update_scanout(struct drm_framebuffer *fb,
} else {
info->p_uv_addr = 0;
}
+
+ if (r_info) {
+ info->width /= 2;
+ info->out_width /= 2;
+
+ *r_info = *info;
+
+ if (fb->format->is_yuv) {
+ if (info->width & 1) {
+ info->width++;
+ r_info->width--;
+ }
+
+ if (info->out_width & 1) {
+ info->out_width++;
+ r_info->out_width--;
+ }
+ }
+
+ r_info->pos_x = info->pos_x + info->out_width;
+
+ r_info->paddr = get_linear_addr(fb, format, 0,
+ x + info->width, y);
+ if (fb->format->format == DRM_FORMAT_NV12) {
+ r_info->p_uv_addr =
+ get_linear_addr(fb, format, 1,
+ x + info->width, y);
+ }
+ }
}
/* pin, prepare for scanout: */
@@ -37,7 +37,9 @@ struct drm_framebuffer *omap_framebuffer_init(struct drm_device *dev,
int omap_framebuffer_pin(struct drm_framebuffer *fb);
void omap_framebuffer_unpin(struct drm_framebuffer *fb);
void omap_framebuffer_update_scanout(struct drm_framebuffer *fb,
- struct drm_plane_state *state, struct omap_overlay_info *info);
+ struct drm_plane_state *state,
+ struct omap_overlay_info *info,
+ struct omap_overlay_info *r_info);
bool omap_framebuffer_supports_rotation(struct drm_framebuffer *fb);
void omap_framebuffer_describe(struct drm_framebuffer *fb, struct seq_file *m);
@@ -65,12 +65,14 @@ omap_plane_find_free_overlay(struct drm_device *dev,
int omap_overlay_assign(struct drm_atomic_state *s, struct drm_plane *plane,
u32 caps, u32 fourcc, u32 crtc_mask,
- struct omap_hw_overlay **overlay)
+ struct omap_hw_overlay **overlay,
+ struct omap_hw_overlay **r_overlay)
{
struct omap_drm_private *priv = s->dev->dev_private;
struct omap_global_state *new_global_state, *old_global_state;
struct drm_plane **overlay_map;
- struct omap_hw_overlay *ovl;
+ struct omap_hw_overlay *ovl, *r_ovl;
+ u32 save_possible_crtcs;
new_global_state = omap_get_global_state(s);
if (IS_ERR(new_global_state))
@@ -92,12 +94,37 @@ int omap_overlay_assign(struct drm_atomic_state *s, struct drm_plane *plane,
if (!ovl)
return -ENOMEM;
+ /* in case we need to backtrack */
+ save_possible_crtcs = ovl->possible_crtcs;
+
ovl->possible_crtcs = crtc_mask;
overlay_map[ovl->idx] = plane;
*overlay = ovl;
+ if (r_overlay) {
+ r_ovl = omap_plane_find_free_overlay(s->dev,
+ overlay_map,
+ caps, fourcc,
+ crtc_mask);
+ if (!r_ovl) {
+ ovl->possible_crtcs = save_possible_crtcs;
+ overlay_map[ovl->idx] = NULL;
+ *overlay = NULL;
+ return -ENOMEM;
+ }
+
+ r_ovl->possible_crtcs = crtc_mask;
+ overlay_map[r_ovl->idx] = plane;
+ *r_overlay = r_ovl;
+ }
+
DBG("%s: assign to plane %s caps %x on crtc %x",
(*overlay)->name, plane->name, caps, crtc_mask);
+
+ if (r_overlay) {
+ DBG("%s: assign to right of plane %s caps %x on crtc %x",
+ (*r_overlay)->name, plane->name, caps, crtc_mask);
+ }
}
return 0;
@@ -30,7 +30,8 @@ int omap_hwoverlays_init(struct omap_drm_private *priv);
void omap_hwoverlays_destroy(struct omap_drm_private *priv);
int omap_overlay_assign(struct drm_atomic_state *s, struct drm_plane *plane,
u32 caps, u32 fourcc, u32 crtc_mask,
- struct omap_hw_overlay **overlay);
+ struct omap_hw_overlay **overlay,
+ struct omap_hw_overlay **r_overlay);
void omap_overlay_release(struct drm_atomic_state *s,
struct drm_plane *plane,
struct omap_hw_overlay *overlay);
@@ -32,6 +32,7 @@ struct omap_plane_state {
struct drm_plane_state base;
struct omap_hw_overlay *overlay;
+ struct omap_hw_overlay *r_overlay; /* right overlay */
};
#define to_omap_plane(x) container_of(x, struct omap_plane, base)
@@ -42,6 +43,13 @@ struct omap_plane {
const char *name;
};
+bool is_omap_plane_dual_overlay(struct drm_plane_state *state)
+{
+ struct omap_plane_state *omap_state = to_omap_plane_state(state);
+
+ return !!omap_state->r_overlay;
+}
+
static int omap_plane_prepare_fb(struct drm_plane *plane,
struct drm_plane_state *new_state)
{
@@ -66,15 +74,20 @@ static void omap_plane_atomic_update(struct drm_plane *plane,
struct drm_plane_state *state = plane->state;
struct omap_plane_state *new_omap_state;
struct omap_plane_state *old_omap_state;
- struct omap_overlay_info info;
- enum omap_plane_id ovl_id;
+ struct omap_overlay_info info, r_info;
+ enum omap_plane_id ovl_id, r_ovl_id;
int ret;
+ bool dual_ovl;
new_omap_state = to_omap_plane_state(state);
old_omap_state = to_omap_plane_state(old_state);
+ dual_ovl = is_omap_plane_dual_overlay(state);
+
/* Cleanup previously held overlay if needed */
omap_overlay_disable(old_state->state, plane, old_omap_state->overlay);
+ omap_overlay_disable(old_state->state, plane,
+ old_omap_state->r_overlay);
if (!new_omap_state->overlay) {
DBG("[PLANE:%d:%s] overlay_id: ??? (%p)", plane->base.id, plane->name,
@@ -93,8 +106,11 @@ static void omap_plane_atomic_update(struct drm_plane *plane,
info.global_alpha = 0xff;
info.zorder = state->normalized_zpos;
+ r_info = info;
+
/* update scanout: */
- omap_framebuffer_update_scanout(state->fb, state, &info);
+ omap_framebuffer_update_scanout(state->fb, state, &info,
+ dual_ovl ? &r_info : NULL);
DBG("%s: %dx%d -> %dx%d (%d)",
new_omap_state->overlay->name, info.width, info.height,
@@ -102,18 +118,50 @@ static void omap_plane_atomic_update(struct drm_plane *plane,
DBG("%d,%d %pad %pad", info.pos_x, info.pos_y,
&info.paddr, &info.p_uv_addr);
+ if (dual_ovl) {
+ r_ovl_id = new_omap_state->r_overlay->overlay_id;
+ /*
+ * If the current plane uses 2 hw planes the very next
+ * zorder is used by the r_overlay so we just use the
+ * main overlay zorder + 1
+ */
+ r_info.zorder = info.zorder + 1;
+
+ DBG("%s: %dx%d -> %dx%d (%d)",
+ new_omap_state->r_overlay->name,
+ r_info.width, r_info.height,
+ r_info.out_width, r_info.out_height, r_info.screen_width);
+ DBG("%d,%d %pad %pad", r_info.pos_x, r_info.pos_y,
+ &r_info.paddr, &r_info.p_uv_addr);
+ }
+
/* and finally, update omapdss: */
ret = priv->dispc_ops->ovl_setup(priv->dispc, ovl_id, &info,
omap_crtc_timings(state->crtc), false,
omap_crtc_channel(state->crtc));
if (ret) {
- dev_err(plane->dev->dev, "Failed to setup plane %s\n",
+ dev_err(plane->dev->dev, "Failed to setup plane1 %s\n",
omap_plane->name);
priv->dispc_ops->ovl_enable(priv->dispc, ovl_id, false);
return;
}
priv->dispc_ops->ovl_enable(priv->dispc, ovl_id, true);
+
+ if (dual_ovl) {
+ ret = priv->dispc_ops->ovl_setup(priv->dispc, r_ovl_id, &r_info,
+ omap_crtc_timings(state->crtc), false,
+ omap_crtc_channel(state->crtc));
+ if (ret) {
+ dev_err(plane->dev->dev, "Failed to setup plane2 %s\n",
+ omap_plane->name);
+ priv->dispc_ops->ovl_enable(priv->dispc, r_ovl_id, false);
+ priv->dispc_ops->ovl_enable(priv->dispc, ovl_id, false);
+ return;
+ }
+
+ priv->dispc_ops->ovl_enable(priv->dispc, r_ovl_id, true);
+ }
}
static void omap_plane_atomic_disable(struct drm_plane *plane,
@@ -135,6 +183,11 @@ static void omap_plane_atomic_disable(struct drm_plane *plane,
omap_overlay_disable(old_state->state, plane, old_omap_state->overlay);
new_omap_state->overlay = NULL;
+ if (is_omap_plane_dual_overlay(old_state)) {
+ omap_overlay_disable(old_state->state, plane,
+ old_omap_state->r_overlay);
+ new_omap_state->r_overlay = NULL;
+ }
}
#define FRAC_16_16(mult, div) (((mult) << 16) / (div))
@@ -153,6 +206,8 @@ static int omap_plane_atomic_check(struct drm_plane *plane,
u32 fourcc;
u32 caps = 0;
bool new_hw_overlay = false;
+ bool new_r_hw_overlay = false;
+ bool is_fourcc_yuv = false;
int min_scale, max_scale;
int ret;
@@ -179,8 +234,31 @@ static int omap_plane_atomic_check(struct drm_plane *plane,
if (state->src_h > height_fp || state->crtc_h > height)
return -EINVAL;
- if (state->src_w > width_fp || state->crtc_w > width)
- return -EINVAL;
+ if (state->fb)
+ is_fourcc_yuv = state->fb->format->is_yuv;
+
+ if (state->src_w > width_fp || state->crtc_w > width) {
+ if (is_fourcc_yuv &&
+ (((state->src_w >> 16) / 2 & 1) ||
+ state->crtc_w / 2 & 1)) {
+ /*
+ * When calculating the split overlay width
+ * and it yield an odd value we will need to adjust
+ * the indivual width +/- 1. So make sure it fits
+ */
+ if (state->src_w <= ((2 * width - 1) << 16) &&
+ state->crtc_w <= (2 * width - 1))
+ new_r_hw_overlay = true;
+ else
+ return -EINVAL;
+ } else {
+ if (state->src_w <= (2 * width_fp) &&
+ state->crtc_w <= (2 * width))
+ new_r_hw_overlay = true;
+ else
+ return -EINVAL;
+ }
+ }
min_scale = FRAC_16_16(1, 4);
max_scale = FRAC_16_16(8, 1);
@@ -224,33 +302,57 @@ static int omap_plane_atomic_check(struct drm_plane *plane,
fourcc))
new_hw_overlay = true;
}
+ /*
+ * check if we need two overlays and only have 1 or
+ * if we had 2 overlays but will only need 1
+ */
+ if ((new_r_hw_overlay && !omap_state->r_overlay) ||
+ (!new_r_hw_overlay && omap_state->r_overlay))
+ new_hw_overlay = true;
if (new_hw_overlay) {
struct omap_hw_overlay *old_ovl =
omap_state->overlay;
+ struct omap_hw_overlay *old_r_ovl =
+ omap_state->r_overlay;
struct omap_hw_overlay *new_ovl = NULL;
+ struct omap_hw_overlay *new_r_ovl = NULL;
omap_overlay_release(state->state, plane, old_ovl);
+ omap_overlay_release(state->state, plane, old_r_ovl);
ret = omap_overlay_assign(state->state, plane, caps,
- fourcc, crtc_mask, &new_ovl);
+ fourcc, crtc_mask, &new_ovl,
+ new_r_hw_overlay ?
+ &new_r_ovl : NULL);
if (ret) {
DBG("%s: failed to assign hw_overlay(s)!",
plane->name);
omap_state->overlay = NULL;
+ omap_state->r_overlay = NULL;
return ret;
}
omap_state->overlay = new_ovl;
+ if (new_r_hw_overlay)
+ omap_state->r_overlay = new_r_ovl;
+ else
+ omap_state->r_overlay = NULL;
}
} else {
omap_overlay_release(state->state, plane, omap_state->overlay);
+ omap_overlay_release(state->state, plane,
+ omap_state->r_overlay);
omap_state->overlay = NULL;
+ omap_state->r_overlay = NULL;
}
if (omap_state->overlay)
DBG("plane: %s overlay_id: %d", plane->name,
omap_state->overlay->overlay_id);
+ if (omap_state->r_overlay)
+ DBG("plane: %s r_overlay_id: %d", plane->name,
+ omap_state->r_overlay->overlay_id);
return 0;
}
@@ -363,6 +465,18 @@ static void omap_plane_atomic_print_state(struct drm_printer *p,
drm_printf(p, "\t\tpossible_crtcs=0x%x\n",
omap_state->overlay->possible_crtcs);
}
+
+ drm_printf(p, "\tr_overlay=%s\n", omap_state->r_overlay ?
+ omap_state->r_overlay->name :
+ "(null)");
+ if (omap_state->r_overlay) {
+ drm_printf(p, "\t\tidx=%d\n", omap_state->r_overlay->idx);
+ drm_printf(p, "\t\toverlay_id=%d\n",
+ omap_state->r_overlay->overlay_id);
+ drm_printf(p, "\t\tcaps=0x%x\n", omap_state->r_overlay->caps);
+ drm_printf(p, "\t\tpossible_crtcs=0x%x\n",
+ omap_state->r_overlay->possible_crtcs);
+ }
}
static int omap_plane_atomic_set_property(struct drm_plane *plane,
@@ -33,5 +33,6 @@ struct drm_plane *omap_plane_init(struct drm_device *dev,
u32 possible_crtcs);
void omap_plane_install_properties(struct drm_plane *plane,
struct drm_mode_object *obj);
+bool is_omap_plane_dual_overlay(struct drm_plane_state *state);
#endif /* __OMAPDRM_PLANE_H__ */
If the drm_plane has a source width that's greater than the max width supported by a single hw overlay, then we assign a 'r_overlay' to it in omap_plane_atomic_check(). Both overlays should have the capabilities required to handle the source framebuffer. The only parameters that vary between the left and right hwoverlays are the src_w, crtc_w, src_x and crtc_x as we just even chop the fb into left and right halves. We also take care of not creating odd width size when dealing with YUV formats. Since both halves need to be 'appear' side by side the zpos is recalculated when dealing with dual overlay cases so that the other planes zpos is consistent. Depending on user space usage it is possible that on occasion the number of requested planes exceeds the numbers of overlays required to display them. In that case a failure would be returned for the plane that cannot be handled at that time. It is up to user space to make sure the H/W resource are not over-subscribed. Signed-off-by: Benoit Parrot <bparrot@ti.com> --- drivers/gpu/drm/omapdrm/omap_drv.c | 91 ++++++++++++++++++++++- drivers/gpu/drm/omapdrm/omap_fb.c | 33 ++++++++- drivers/gpu/drm/omapdrm/omap_fb.h | 4 +- drivers/gpu/drm/omapdrm/omap_overlay.c | 31 +++++++- drivers/gpu/drm/omapdrm/omap_overlay.h | 3 +- drivers/gpu/drm/omapdrm/omap_plane.c | 128 +++++++++++++++++++++++++++++++-- drivers/gpu/drm/omapdrm/omap_plane.h | 1 + 7 files changed, 278 insertions(+), 13 deletions(-)