diff mbox series

[v2,15/15] arm64: dts: allwinner: bananapi-m64: Bananapi S070WV20-CT16 DSI panel

Message ID 20181023155035.9101-16-jagan@amarulasolutions.com (mailing list archive)
State New, archived
Headers show
Series drm/sun4i: Allwinner A64 MIPI-DSI support | expand

Commit Message

Jagan Teki Oct. 23, 2018, 3:50 p.m. UTC
This patch add support for Bananapi S070WV20-CT16 DSI panel to
BPI-M64 board.

DSI panel connected via board DSI port with,
- DC1SW as AVDD supply
- DCDC1 as DVDD supply
- PD6 gpio for reset pin
- PD5 gpio for backlight enable pin
- PD7 gpio for backlight vdd supply

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v2:
- Use quadratic rule on pwm brightness

 .../dts/allwinner/sun50i-a64-bananapi-m64.dts | 42 +++++++++++++++++++
 1 file changed, 42 insertions(+)

Comments

Maxime Ripard Oct. 24, 2018, 6:11 p.m. UTC | #1
On Tue, Oct 23, 2018 at 09:20:35PM +0530, Jagan Teki wrote:
> This patch add support for Bananapi S070WV20-CT16 DSI panel to
> BPI-M64 board.
> 
> DSI panel connected via board DSI port with,
> - DC1SW as AVDD supply
> - DCDC1 as DVDD supply
> - PD6 gpio for reset pin
> - PD5 gpio for backlight enable pin
> - PD7 gpio for backlight vdd supply
> 
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> Changes for v2:
> - Use quadratic rule on pwm brightness
> 
>  .../dts/allwinner/sun50i-a64-bananapi-m64.dts | 42 +++++++++++++++++++
>  1 file changed, 42 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
> index ef1c90401bb2..e0c6d1870a94 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
> @@ -45,6 +45,7 @@
>  #include "sun50i-a64.dtsi"
>  
>  #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/pwm/pwm.h>
>  
>  / {
>  	model = "BananaPi-M64";
> @@ -56,6 +57,24 @@
>  		serial1 = &uart1;
>  	};
>  
> +	vdd_bl: regulator@0 {

You shouldn't have a unit address if you don't have a reg
property. This will trigger a DTC warning.

> +		compatible = "regulator-fixed";
> +		regulator-name = "bl-3v3";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		gpio = <&pio 3 7 GPIO_ACTIVE_HIGH>; /* PD7 */
> +		enable-active-high;
> +	};
> +
> +	backlight_dsi: backlight-dsi {
> +		compatible = "pwm-backlight";
> +		pwms = <&r_pwm 0 50000 PWM_POLARITY_INVERTED>;
> +		brightness-levels = <1 2 4 8 16 32 64 128 512>;
> +		default-brightness-level = <2>;
> +		enable-gpios = <&pio 3 5 GPIO_ACTIVE_HIGH>; /* PD5 */
> +		power-supply = <&vdd_bl>;
> +	};

These nodes should be ordered by alphabetical order.

Maxime
Chen-Yu Tsai Oct. 24, 2018, 8:36 p.m. UTC | #2
On Wed, Oct 24, 2018 at 7:12 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
> On Tue, Oct 23, 2018 at 09:20:35PM +0530, Jagan Teki wrote:
> > This patch add support for Bananapi S070WV20-CT16 DSI panel to
> > BPI-M64 board.
> >
> > DSI panel connected via board DSI port with,
> > - DC1SW as AVDD supply
> > - DCDC1 as DVDD supply
> > - PD6 gpio for reset pin
> > - PD5 gpio for backlight enable pin
> > - PD7 gpio for backlight vdd supply

This is for a removable module, which is best handled using an overlay.
This patch should be marked [DO NOT MERGE].

> > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> > ---
> > Changes for v2:
> > - Use quadratic rule on pwm brightness
> >
> >  .../dts/allwinner/sun50i-a64-bananapi-m64.dts | 42 +++++++++++++++++++
> >  1 file changed, 42 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
> > index ef1c90401bb2..e0c6d1870a94 100644
> > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
> > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
> > @@ -45,6 +45,7 @@
> >  #include "sun50i-a64.dtsi"
> >
> >  #include <dt-bindings/gpio/gpio.h>
> > +#include <dt-bindings/pwm/pwm.h>
> >
> >  / {
> >       model = "BananaPi-M64";
> > @@ -56,6 +57,24 @@
> >               serial1 = &uart1;
> >       };
> >
> > +     vdd_bl: regulator@0 {
>
> You shouldn't have a unit address if you don't have a reg
> property. This will trigger a DTC warning.
> > +             compatible = "regulator-fixed";
> > +             regulator-name = "bl-3v3";
> > +             regulator-min-microvolt = <3300000>;
> > +             regulator-max-microvolt = <3300000>;
> > +             gpio = <&pio 3 7 GPIO_ACTIVE_HIGH>; /* PD7 */
> > +             enable-active-high;
> > +     };
> > +
> > +     backlight_dsi: backlight-dsi {

This should be just "backlight". There's nothing DSI specific
about a backlight.

> > +             compatible = "pwm-backlight";
> > +             pwms = <&r_pwm 0 50000 PWM_POLARITY_INVERTED>;
> > +             brightness-levels = <1 2 4 8 16 32 64 128 512>;
> > +             default-brightness-level = <2>;
> > +             enable-gpios = <&pio 3 5 GPIO_ACTIVE_HIGH>; /* PD5 */
> > +             power-supply = <&vdd_bl>;
> > +     };
>
> These nodes should be ordered by alphabetical order.
>
> Maxime
>
> --
> Maxime Ripard, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
index ef1c90401bb2..e0c6d1870a94 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
@@ -45,6 +45,7 @@ 
 #include "sun50i-a64.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
 
 / {
 	model = "BananaPi-M64";
@@ -56,6 +57,24 @@ 
 		serial1 = &uart1;
 	};
 
+	vdd_bl: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "bl-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 3 7 GPIO_ACTIVE_HIGH>; /* PD7 */
+		enable-active-high;
+	};
+
+	backlight_dsi: backlight-dsi {
+		compatible = "pwm-backlight";
+		pwms = <&r_pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <1 2 4 8 16 32 64 128 512>;
+		default-brightness-level = <2>;
+		enable-gpios = <&pio 3 5 GPIO_ACTIVE_HIGH>; /* PD5 */
+		power-supply = <&vdd_bl>;
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
@@ -101,6 +120,23 @@ 
 	status = "okay";
 };
 
+&dphy {
+	status = "okay";
+};
+
+&dsi {
+	status = "okay";
+
+	panel@0 {
+		compatible = "bananapi,s070wv20-ct16-icn6211";
+		reg = <0>;
+		avdd-supply = <&reg_dc1sw>;
+		dvdd-supply = <&reg_dldo1>;
+		reset-gpios = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
+		backlight = <&backlight_dsi>;
+	};
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -193,6 +229,12 @@ 
 	status = "okay";
 };
 
+&r_pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_pwm_pin>;
+	status = "okay";
+};
+
 &r_rsb {
 	status = "okay";