diff mbox series

[1/2] video: lcd: Remove useless BACKLIGHT_LCD_SUPPORT kernel symbol

Message ID 20181216050247.30043-1-shc_work@mail.ru (mailing list archive)
State New, archived
Headers show
Series [1/2] video: lcd: Remove useless BACKLIGHT_LCD_SUPPORT kernel symbol | expand

Commit Message

Alexander Shiyan Dec. 16, 2018, 5:02 a.m. UTC
Symbol BACKLIGHT_LCD_SUPPORT affecting anything, except enabling
the backlight & LCD Kconfig menu. The patch removes this symbol as
useless and converts it into a menu.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
 arch/unicore32/Kconfig            |  1 -
 drivers/gpu/drm/Kconfig           |  2 --
 drivers/gpu/drm/bridge/Kconfig    |  1 -
 drivers/gpu/drm/fsl-dcu/Kconfig   |  1 -
 drivers/gpu/drm/i915/Kconfig      |  1 -
 drivers/gpu/drm/nouveau/Kconfig   |  1 -
 drivers/gpu/drm/shmobile/Kconfig  |  1 -
 drivers/gpu/drm/tilcdc/Kconfig    |  1 -
 drivers/staging/olpc_dcon/Kconfig |  1 -
 drivers/usb/misc/Kconfig          |  1 -
 drivers/video/backlight/Kconfig   | 10 ++--------
 drivers/video/fbdev/Kconfig       |  5 -----
 12 files changed, 2 insertions(+), 24 deletions(-)

Comments

Daniel Thompson Dec. 18, 2018, 5:21 p.m. UTC | #1
On Sun, Dec 16, 2018 at 08:02:46AM +0300, Alexander Shiyan wrote:
> Symbol BACKLIGHT_LCD_SUPPORT affecting anything, except enabling
> the backlight & LCD Kconfig menu. The patch removes this symbol as
> useless and converts it into a menu.

Something bothered me about the patch but I think its the lack of
explanation in the patch header about *why* we don't use/need/want
BACKLIGHT_LCD_SUPPORT.

Essentially the reason BACKLIGHT_LCD_SUPPORT is useless is that we have
two _CLASS_DEVICE configs (LCD_CLASS_DEVICE and BACKLIGHT_LCD_DEVICE)
that do the same job (ad that do have code attached to them).

It would be good to mention that in the patch header.


Daniel.

> 
> Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
> ---
>  arch/unicore32/Kconfig            |  1 -
>  drivers/gpu/drm/Kconfig           |  2 --
>  drivers/gpu/drm/bridge/Kconfig    |  1 -
>  drivers/gpu/drm/fsl-dcu/Kconfig   |  1 -
>  drivers/gpu/drm/i915/Kconfig      |  1 -
>  drivers/gpu/drm/nouveau/Kconfig   |  1 -
>  drivers/gpu/drm/shmobile/Kconfig  |  1 -
>  drivers/gpu/drm/tilcdc/Kconfig    |  1 -
>  drivers/staging/olpc_dcon/Kconfig |  1 -
>  drivers/usb/misc/Kconfig          |  1 -
>  drivers/video/backlight/Kconfig   | 10 ++--------
>  drivers/video/fbdev/Kconfig       |  5 -----
>  12 files changed, 2 insertions(+), 24 deletions(-)
> 
> diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig
> index a4c0515..afeea3d 100644
> --- a/arch/unicore32/Kconfig
> +++ b/arch/unicore32/Kconfig
> @@ -211,7 +211,6 @@ config I2C_EEPROM_AT24
>  
>  config LCD_BACKLIGHT
>  	tristate "LCD Backlight support"
> -	select BACKLIGHT_LCD_SUPPORT
>  	select BACKLIGHT_PWM
>  
>  endmenu
> diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
> index 4385f00..ef442a7 100644
> --- a/drivers/gpu/drm/Kconfig
> +++ b/drivers/gpu/drm/Kconfig
> @@ -198,7 +198,6 @@ config DRM_RADEON
>  	select POWER_SUPPLY
>  	select HWMON
>  	select BACKLIGHT_CLASS_DEVICE
> -	select BACKLIGHT_LCD_SUPPORT
>  	select INTERVAL_TREE
>  	help
>  	  Choose this option if you have an ATI Radeon graphics card.  There
> @@ -219,7 +218,6 @@ config DRM_AMDGPU
>  	select POWER_SUPPLY
>  	select HWMON
>  	select BACKLIGHT_CLASS_DEVICE
> -	select BACKLIGHT_LCD_SUPPORT
>  	select INTERVAL_TREE
>  	select CHASH
>  	help
> diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
> index 9eeb8ef..0f724e2 100644
> --- a/drivers/gpu/drm/bridge/Kconfig
> +++ b/drivers/gpu/drm/bridge/Kconfig
> @@ -75,7 +75,6 @@ config DRM_PARADE_PS8622
>  	depends on OF
>  	select DRM_PANEL
>  	select DRM_KMS_HELPER
> -	select BACKLIGHT_LCD_SUPPORT
>  	select BACKLIGHT_CLASS_DEVICE
>  	---help---
>  	  Parade eDP-LVDS bridge chip driver.
> diff --git a/drivers/gpu/drm/fsl-dcu/Kconfig b/drivers/gpu/drm/fsl-dcu/Kconfig
> index 14a72c4..dc82588 100644
> --- a/drivers/gpu/drm/fsl-dcu/Kconfig
> +++ b/drivers/gpu/drm/fsl-dcu/Kconfig
> @@ -2,7 +2,6 @@ config DRM_FSL_DCU
>  	tristate "DRM Support for Freescale DCU"
>  	depends on DRM && OF && ARM && COMMON_CLK
>  	select BACKLIGHT_CLASS_DEVICE
> -	select BACKLIGHT_LCD_SUPPORT
>  	select DRM_KMS_HELPER
>  	select DRM_KMS_CMA_HELPER
>  	select DRM_PANEL
> diff --git a/drivers/gpu/drm/i915/Kconfig b/drivers/gpu/drm/i915/Kconfig
> index 33a458b..90d406e73 100644
> --- a/drivers/gpu/drm/i915/Kconfig
> +++ b/drivers/gpu/drm/i915/Kconfig
> @@ -15,7 +15,6 @@ config DRM_I915
>  	select IRQ_WORK
>  	# i915 depends on ACPI_VIDEO when ACPI is enabled
>  	# but for select to work, need to select ACPI_VIDEO's dependencies, ick
> -	select BACKLIGHT_LCD_SUPPORT if ACPI
>  	select BACKLIGHT_CLASS_DEVICE if ACPI
>  	select INPUT if ACPI
>  	select ACPI_VIDEO if ACPI
> diff --git a/drivers/gpu/drm/nouveau/Kconfig b/drivers/gpu/drm/nouveau/Kconfig
> index 4b75ad40..a0238bf 100644
> --- a/drivers/gpu/drm/nouveau/Kconfig
> +++ b/drivers/gpu/drm/nouveau/Kconfig
> @@ -11,7 +11,6 @@ config DRM_NOUVEAU
>  	select MXM_WMI if ACPI && X86
>  	select POWER_SUPPLY
>  	# Similar to i915, we need to select ACPI_VIDEO and it's dependencies
> -	select BACKLIGHT_LCD_SUPPORT if ACPI && X86
>  	select BACKLIGHT_CLASS_DEVICE if ACPI && X86
>  	select INPUT if ACPI && X86
>  	select THERMAL if ACPI && X86
> diff --git a/drivers/gpu/drm/shmobile/Kconfig b/drivers/gpu/drm/shmobile/Kconfig
> index 61bbe8e..e2a6c82 100644
> --- a/drivers/gpu/drm/shmobile/Kconfig
> +++ b/drivers/gpu/drm/shmobile/Kconfig
> @@ -4,7 +4,6 @@ config DRM_SHMOBILE
>  	depends on DRM && ARM
>  	depends on ARCH_SHMOBILE || COMPILE_TEST
>  	select BACKLIGHT_CLASS_DEVICE
> -	select BACKLIGHT_LCD_SUPPORT
>  	select DRM_KMS_HELPER
>  	select DRM_KMS_CMA_HELPER
>  	select DRM_GEM_CMA_HELPER
> diff --git a/drivers/gpu/drm/tilcdc/Kconfig b/drivers/gpu/drm/tilcdc/Kconfig
> index 5259804..cb7df20 100644
> --- a/drivers/gpu/drm/tilcdc/Kconfig
> +++ b/drivers/gpu/drm/tilcdc/Kconfig
> @@ -8,7 +8,6 @@ config DRM_TILCDC
>  	select DRM_PANEL_BRIDGE
>  	select VIDEOMODE_HELPERS
>  	select BACKLIGHT_CLASS_DEVICE
> -	select BACKLIGHT_LCD_SUPPORT
>  	help
>  	  Choose this option if you have an TI SoC with LCDC display
>  	  controller, for example AM33xx in beagle-bone, DA8xx, or
> diff --git a/drivers/staging/olpc_dcon/Kconfig b/drivers/staging/olpc_dcon/Kconfig
> index 192cc8d..c91a56f 100644
> --- a/drivers/staging/olpc_dcon/Kconfig
> +++ b/drivers/staging/olpc_dcon/Kconfig
> @@ -2,7 +2,6 @@ config FB_OLPC_DCON
>  	tristate "One Laptop Per Child Display CONtroller support"
>  	depends on OLPC && FB
>  	depends on I2C
> -	depends on BACKLIGHT_LCD_SUPPORT
>  	depends on (GPIO_CS5535 || GPIO_CS5535=n)
>  	select BACKLIGHT_CLASS_DEVICE
>  	help
> diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
> index 68d2f2c..a86a80b 100644
> --- a/drivers/usb/misc/Kconfig
> +++ b/drivers/usb/misc/Kconfig
> @@ -141,7 +141,6 @@ config USB_FTDI_ELAN
>  
>  config USB_APPLEDISPLAY
>  	tristate "Apple Cinema Display support"
> -	select BACKLIGHT_LCD_SUPPORT
>  	select BACKLIGHT_CLASS_DEVICE
>  	help
>  	  Say Y here if you want to control the backlight of Apple Cinema
> diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
> index 71ee978..3fdc18e 100644
> --- a/drivers/video/backlight/Kconfig
> +++ b/drivers/video/backlight/Kconfig
> @@ -2,13 +2,7 @@
>  # Backlight & LCD drivers configuration
>  #
>  
> -menuconfig BACKLIGHT_LCD_SUPPORT
> -	bool "Backlight & LCD device support"
> -	help
> -	  Enable this to be able to choose the drivers for controlling the
> -	  backlight and the LCD panel on some platforms, for example on PDAs.
> -
> -if BACKLIGHT_LCD_SUPPORT
> +menu "Backlight & LCD device support"
>  
>  #
>  # LCD
> @@ -466,4 +460,4 @@ config BACKLIGHT_RAVE_SP
>  
>  endif # BACKLIGHT_CLASS_DEVICE
>  
> -endif # BACKLIGHT_LCD_SUPPORT
> +endmenu
> diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
> index e413f54..0037d5e 100644
> --- a/drivers/video/fbdev/Kconfig
> +++ b/drivers/video/fbdev/Kconfig
> @@ -186,7 +186,6 @@ config FB_MACMODES
>  config FB_BACKLIGHT
>  	bool
>  	depends on FB
> -	select BACKLIGHT_LCD_SUPPORT
>  	select BACKLIGHT_CLASS_DEVICE
>  
>  config FB_MODE_HELPERS
> @@ -281,7 +280,6 @@ config FB_ARMCLCD
>  	select FB_CFB_IMAGEBLIT
>  	select FB_MODE_HELPERS if OF
>  	select VIDEOMODE_HELPERS if OF
> -	select BACKLIGHT_LCD_SUPPORT if OF
>  	select BACKLIGHT_CLASS_DEVICE if OF
>  	help
>  	  This framebuffer device driver is for the ARM PrimeCell PL110
> @@ -315,7 +313,6 @@ config FB_ACORN
>  config FB_CLPS711X
>  	tristate "CLPS711X LCD support"
>  	depends on FB && (ARCH_CLPS711X || COMPILE_TEST)
> -	select BACKLIGHT_LCD_SUPPORT
>  	select FB_MODE_HELPERS
>  	select FB_SYS_FILLRECT
>  	select FB_SYS_COPYAREA
> @@ -343,7 +340,6 @@ config FB_SA1100
>  config FB_IMX
>  	tristate "Freescale i.MX1/21/25/27 LCD support"
>  	depends on FB && ARCH_MXC
> -	select BACKLIGHT_LCD_SUPPORT
>  	select LCD_CLASS_DEVICE
>  	select FB_CFB_FILLRECT
>  	select FB_CFB_COPYAREA
> @@ -2191,7 +2187,6 @@ config FB_MX3
>  	tristate "MX3 Framebuffer support"
>  	depends on FB && MX3_IPU
>  	select BACKLIGHT_CLASS_DEVICE
> -	select BACKLIGHT_LCD_SUPPORT
>  	select FB_CFB_FILLRECT
>  	select FB_CFB_COPYAREA
>  	select FB_CFB_IMAGEBLIT
> -- 
> 2.10.2
>
diff mbox series

Patch

diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig
index a4c0515..afeea3d 100644
--- a/arch/unicore32/Kconfig
+++ b/arch/unicore32/Kconfig
@@ -211,7 +211,6 @@  config I2C_EEPROM_AT24
 
 config LCD_BACKLIGHT
 	tristate "LCD Backlight support"
-	select BACKLIGHT_LCD_SUPPORT
 	select BACKLIGHT_PWM
 
 endmenu
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 4385f00..ef442a7 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -198,7 +198,6 @@  config DRM_RADEON
 	select POWER_SUPPLY
 	select HWMON
 	select BACKLIGHT_CLASS_DEVICE
-	select BACKLIGHT_LCD_SUPPORT
 	select INTERVAL_TREE
 	help
 	  Choose this option if you have an ATI Radeon graphics card.  There
@@ -219,7 +218,6 @@  config DRM_AMDGPU
 	select POWER_SUPPLY
 	select HWMON
 	select BACKLIGHT_CLASS_DEVICE
-	select BACKLIGHT_LCD_SUPPORT
 	select INTERVAL_TREE
 	select CHASH
 	help
diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index 9eeb8ef..0f724e2 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -75,7 +75,6 @@  config DRM_PARADE_PS8622
 	depends on OF
 	select DRM_PANEL
 	select DRM_KMS_HELPER
-	select BACKLIGHT_LCD_SUPPORT
 	select BACKLIGHT_CLASS_DEVICE
 	---help---
 	  Parade eDP-LVDS bridge chip driver.
diff --git a/drivers/gpu/drm/fsl-dcu/Kconfig b/drivers/gpu/drm/fsl-dcu/Kconfig
index 14a72c4..dc82588 100644
--- a/drivers/gpu/drm/fsl-dcu/Kconfig
+++ b/drivers/gpu/drm/fsl-dcu/Kconfig
@@ -2,7 +2,6 @@  config DRM_FSL_DCU
 	tristate "DRM Support for Freescale DCU"
 	depends on DRM && OF && ARM && COMMON_CLK
 	select BACKLIGHT_CLASS_DEVICE
-	select BACKLIGHT_LCD_SUPPORT
 	select DRM_KMS_HELPER
 	select DRM_KMS_CMA_HELPER
 	select DRM_PANEL
diff --git a/drivers/gpu/drm/i915/Kconfig b/drivers/gpu/drm/i915/Kconfig
index 33a458b..90d406e73 100644
--- a/drivers/gpu/drm/i915/Kconfig
+++ b/drivers/gpu/drm/i915/Kconfig
@@ -15,7 +15,6 @@  config DRM_I915
 	select IRQ_WORK
 	# i915 depends on ACPI_VIDEO when ACPI is enabled
 	# but for select to work, need to select ACPI_VIDEO's dependencies, ick
-	select BACKLIGHT_LCD_SUPPORT if ACPI
 	select BACKLIGHT_CLASS_DEVICE if ACPI
 	select INPUT if ACPI
 	select ACPI_VIDEO if ACPI
diff --git a/drivers/gpu/drm/nouveau/Kconfig b/drivers/gpu/drm/nouveau/Kconfig
index 4b75ad40..a0238bf 100644
--- a/drivers/gpu/drm/nouveau/Kconfig
+++ b/drivers/gpu/drm/nouveau/Kconfig
@@ -11,7 +11,6 @@  config DRM_NOUVEAU
 	select MXM_WMI if ACPI && X86
 	select POWER_SUPPLY
 	# Similar to i915, we need to select ACPI_VIDEO and it's dependencies
-	select BACKLIGHT_LCD_SUPPORT if ACPI && X86
 	select BACKLIGHT_CLASS_DEVICE if ACPI && X86
 	select INPUT if ACPI && X86
 	select THERMAL if ACPI && X86
diff --git a/drivers/gpu/drm/shmobile/Kconfig b/drivers/gpu/drm/shmobile/Kconfig
index 61bbe8e..e2a6c82 100644
--- a/drivers/gpu/drm/shmobile/Kconfig
+++ b/drivers/gpu/drm/shmobile/Kconfig
@@ -4,7 +4,6 @@  config DRM_SHMOBILE
 	depends on DRM && ARM
 	depends on ARCH_SHMOBILE || COMPILE_TEST
 	select BACKLIGHT_CLASS_DEVICE
-	select BACKLIGHT_LCD_SUPPORT
 	select DRM_KMS_HELPER
 	select DRM_KMS_CMA_HELPER
 	select DRM_GEM_CMA_HELPER
diff --git a/drivers/gpu/drm/tilcdc/Kconfig b/drivers/gpu/drm/tilcdc/Kconfig
index 5259804..cb7df20 100644
--- a/drivers/gpu/drm/tilcdc/Kconfig
+++ b/drivers/gpu/drm/tilcdc/Kconfig
@@ -8,7 +8,6 @@  config DRM_TILCDC
 	select DRM_PANEL_BRIDGE
 	select VIDEOMODE_HELPERS
 	select BACKLIGHT_CLASS_DEVICE
-	select BACKLIGHT_LCD_SUPPORT
 	help
 	  Choose this option if you have an TI SoC with LCDC display
 	  controller, for example AM33xx in beagle-bone, DA8xx, or
diff --git a/drivers/staging/olpc_dcon/Kconfig b/drivers/staging/olpc_dcon/Kconfig
index 192cc8d..c91a56f 100644
--- a/drivers/staging/olpc_dcon/Kconfig
+++ b/drivers/staging/olpc_dcon/Kconfig
@@ -2,7 +2,6 @@  config FB_OLPC_DCON
 	tristate "One Laptop Per Child Display CONtroller support"
 	depends on OLPC && FB
 	depends on I2C
-	depends on BACKLIGHT_LCD_SUPPORT
 	depends on (GPIO_CS5535 || GPIO_CS5535=n)
 	select BACKLIGHT_CLASS_DEVICE
 	help
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index 68d2f2c..a86a80b 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -141,7 +141,6 @@  config USB_FTDI_ELAN
 
 config USB_APPLEDISPLAY
 	tristate "Apple Cinema Display support"
-	select BACKLIGHT_LCD_SUPPORT
 	select BACKLIGHT_CLASS_DEVICE
 	help
 	  Say Y here if you want to control the backlight of Apple Cinema
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 71ee978..3fdc18e 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -2,13 +2,7 @@ 
 # Backlight & LCD drivers configuration
 #
 
-menuconfig BACKLIGHT_LCD_SUPPORT
-	bool "Backlight & LCD device support"
-	help
-	  Enable this to be able to choose the drivers for controlling the
-	  backlight and the LCD panel on some platforms, for example on PDAs.
-
-if BACKLIGHT_LCD_SUPPORT
+menu "Backlight & LCD device support"
 
 #
 # LCD
@@ -466,4 +460,4 @@  config BACKLIGHT_RAVE_SP
 
 endif # BACKLIGHT_CLASS_DEVICE
 
-endif # BACKLIGHT_LCD_SUPPORT
+endmenu
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index e413f54..0037d5e 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -186,7 +186,6 @@  config FB_MACMODES
 config FB_BACKLIGHT
 	bool
 	depends on FB
-	select BACKLIGHT_LCD_SUPPORT
 	select BACKLIGHT_CLASS_DEVICE
 
 config FB_MODE_HELPERS
@@ -281,7 +280,6 @@  config FB_ARMCLCD
 	select FB_CFB_IMAGEBLIT
 	select FB_MODE_HELPERS if OF
 	select VIDEOMODE_HELPERS if OF
-	select BACKLIGHT_LCD_SUPPORT if OF
 	select BACKLIGHT_CLASS_DEVICE if OF
 	help
 	  This framebuffer device driver is for the ARM PrimeCell PL110
@@ -315,7 +313,6 @@  config FB_ACORN
 config FB_CLPS711X
 	tristate "CLPS711X LCD support"
 	depends on FB && (ARCH_CLPS711X || COMPILE_TEST)
-	select BACKLIGHT_LCD_SUPPORT
 	select FB_MODE_HELPERS
 	select FB_SYS_FILLRECT
 	select FB_SYS_COPYAREA
@@ -343,7 +340,6 @@  config FB_SA1100
 config FB_IMX
 	tristate "Freescale i.MX1/21/25/27 LCD support"
 	depends on FB && ARCH_MXC
-	select BACKLIGHT_LCD_SUPPORT
 	select LCD_CLASS_DEVICE
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
@@ -2191,7 +2187,6 @@  config FB_MX3
 	tristate "MX3 Framebuffer support"
 	depends on FB && MX3_IPU
 	select BACKLIGHT_CLASS_DEVICE
-	select BACKLIGHT_LCD_SUPPORT
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT