@@ -234,7 +234,7 @@ static int dumb_vga_remove(struct platform_device *pdev)
*/
static const struct drm_bridge_timings default_dac_timings = {
/* Timing specifications, datasheet page 7 */
- .sampling_edge = DRM_BUS_FLAG_PIXDATA_POSEDGE,
+ .sampling_edge = DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE,
.setup_time_ps = 500,
.hold_time_ps = 1500,
};
@@ -245,7 +245,7 @@ static const struct drm_bridge_timings default_dac_timings = {
*/
static const struct drm_bridge_timings ti_ths8134_dac_timings = {
/* From timing diagram, datasheet page 9 */
- .sampling_edge = DRM_BUS_FLAG_PIXDATA_POSEDGE,
+ .sampling_edge = DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE,
/* From datasheet, page 12 */
.setup_time_ps = 3000,
/* I guess this means latched input */
@@ -258,7 +258,7 @@ static const struct drm_bridge_timings ti_ths8134_dac_timings = {
*/
static const struct drm_bridge_timings ti_ths8135_dac_timings = {
/* From timing diagram, datasheet page 14 */
- .sampling_edge = DRM_BUS_FLAG_PIXDATA_POSEDGE,
+ .sampling_edge = DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE,
/* From datasheet, page 16 */
.setup_time_ps = 2000,
.hold_time_ps = 500,
@@ -655,22 +655,22 @@ EXPORT_SYMBOL_GPL(drm_display_mode_to_videomode);
* @bus_flags: information about pixelclk, sync and DE polarity will be stored
* here
*
- * Sets DRM_BUS_FLAG_DE_(LOW|HIGH), DRM_BUS_FLAG_PIXDATA_(POS|NEG)EDGE and
- * DISPLAY_FLAGS_SYNC_(POS|NEG)EDGE in @bus_flags according to DISPLAY_FLAGS
+ * Sets DRM_BUS_FLAG_DE_(LOW|HIGH), DRM_BUS_FLAG_PIXDATA_DRIVE_(POS|NEG)EDGE
+ * and DISPLAY_FLAGS_SYNC_(POS|NEG)EDGE in @bus_flags according to DISPLAY_FLAGS
* found in @vm
*/
void drm_bus_flags_from_videomode(const struct videomode *vm, u32 *bus_flags)
{
*bus_flags = 0;
if (vm->flags & DISPLAY_FLAGS_PIXDATA_POSEDGE)
- *bus_flags |= DRM_BUS_FLAG_PIXDATA_POSEDGE;
+ *bus_flags |= DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE;
if (vm->flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE)
- *bus_flags |= DRM_BUS_FLAG_PIXDATA_NEGEDGE;
+ *bus_flags |= DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE;
if (vm->flags & DISPLAY_FLAGS_SYNC_POSEDGE)
- *bus_flags |= DRM_BUS_FLAG_SYNC_POSEDGE;
+ *bus_flags |= DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE;
if (vm->flags & DISPLAY_FLAGS_SYNC_NEGEDGE)
- *bus_flags |= DRM_BUS_FLAG_SYNC_NEGEDGE;
+ *bus_flags |= DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE;
if (vm->flags & DISPLAY_FLAGS_DE_LOW)
*bus_flags |= DRM_BUS_FLAG_DE_LOW;
@@ -94,7 +94,7 @@ static void fsl_dcu_drm_crtc_mode_set_nofb(struct drm_crtc *crtc)
drm_display_mode_to_videomode(mode, &vm);
/* INV_PXCK as default (most display sample data on rising edge) */
- if (!(con->display_info.bus_flags & DRM_BUS_FLAG_PIXDATA_POSEDGE))
+ if (!(con->display_info.bus_flags & DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE))
pol |= DCU_SYN_POL_INV_PXCK;
if (vm.flags & DISPLAY_FLAGS_HSYNC_LOW)
@@ -269,7 +269,7 @@ static void ipu_crtc_mode_set_nofb(struct drm_crtc *crtc)
sig_cfg.enable_pol = !(imx_crtc_state->bus_flags & DRM_BUS_FLAG_DE_LOW);
/* Default to driving pixel data on negative clock edges */
sig_cfg.clk_pol = !!(imx_crtc_state->bus_flags &
- DRM_BUS_FLAG_PIXDATA_POSEDGE);
+ DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE);
sig_cfg.bus_format = imx_crtc_state->bus_format;
sig_cfg.v_to_h_sync = 0;
sig_cfg.hsync_pin = imx_crtc_state->di_hsync_pin;
@@ -253,12 +253,12 @@ static void mxsfb_crtc_mode_set_nofb(struct mxsfb_drm_private *mxsfb)
if (!(bus_flags & DRM_BUS_FLAG_DE_LOW))
vdctrl0 |= VDCTRL0_ENABLE_ACT_HIGH;
/*
- * DRM_BUS_FLAG_PIXDATA_ defines are controller centric,
+ * DRM_BUS_FLAG_PIXDATA_DRIVE_ defines are controller centric,
* controllers VDCTRL0_DOTCLK is display centric.
* Drive on positive edge -> display samples on falling edge
- * DRM_BUS_FLAG_PIXDATA_POSEDGE -> VDCTRL0_DOTCLK_ACT_FALLING
+ * DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE -> VDCTRL0_DOTCLK_ACT_FALLING
*/
- if (bus_flags & DRM_BUS_FLAG_PIXDATA_POSEDGE)
+ if (bus_flags & DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE)
vdctrl0 |= VDCTRL0_DOTCLK_ACT_FALLING;
writel(vdctrl0, mxsfb->base + LCDC_VDCTRL0);
@@ -86,8 +86,9 @@ static int tfp410_probe(struct platform_device *pdev)
dssdev->type = OMAP_DISPLAY_TYPE_DPI;
dssdev->owner = THIS_MODULE;
dssdev->of_ports = BIT(1) | BIT(0);
- dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_SYNC_POSEDGE
- | DRM_BUS_FLAG_PIXDATA_POSEDGE;
+ dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH
+ | DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE
+ | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE;
dssdev->next = omapdss_of_find_connected_device(pdev->dev.of_node, 1);
if (IS_ERR(dssdev->next)) {
@@ -207,8 +207,9 @@ static int lb035q02_panel_spi_probe(struct spi_device *spi)
* DE is active LOW
* DATA needs to be driven on the FALLING edge
*/
- dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_SYNC_NEGEDGE
- | DRM_BUS_FLAG_PIXDATA_POSEDGE;
+ dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH
+ | DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE
+ | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE;
omapdss_display_init(dssdev);
omapdss_device_register(dssdev);
@@ -196,8 +196,9 @@ static int nec_8048_probe(struct spi_device *spi)
dssdev->owner = THIS_MODULE;
dssdev->of_ports = BIT(0);
dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
- dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_SYNC_POSEDGE
- | DRM_BUS_FLAG_PIXDATA_POSEDGE;
+ dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH
+ | DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE
+ | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE;
omapdss_display_init(dssdev);
omapdss_device_register(dssdev);
@@ -216,8 +216,9 @@ static int sharp_ls_probe(struct platform_device *pdev)
* Note: According to the panel documentation:
* DATA needs to be driven on the FALLING edge
*/
- dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_SYNC_NEGEDGE
- | DRM_BUS_FLAG_PIXDATA_POSEDGE;
+ dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH
+ | DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE
+ | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE;
omapdss_display_init(dssdev);
omapdss_device_register(dssdev);
@@ -710,8 +710,9 @@ static int acx565akm_probe(struct spi_device *spi)
dssdev->owner = THIS_MODULE;
dssdev->of_ports = BIT(0);
dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
- dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_SYNC_NEGEDGE
- | DRM_BUS_FLAG_PIXDATA_POSEDGE;
+ dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH
+ | DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE
+ | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE;
omapdss_display_init(dssdev);
omapdss_device_register(dssdev);
@@ -330,8 +330,9 @@ static int td028ttec1_panel_probe(struct spi_device *spi)
* Note: According to the panel documentation:
* SYNC needs to be driven on the FALLING edge
*/
- dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_SYNC_POSEDGE
- | DRM_BUS_FLAG_PIXDATA_NEGEDGE;
+ dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH
+ | DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE
+ | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE;
omapdss_display_init(dssdev);
omapdss_device_register(dssdev);
@@ -429,8 +429,9 @@ static int tpo_td043_probe(struct spi_device *spi)
* Note: According to the panel documentation:
* SYNC needs to be driven on the FALLING edge
*/
- dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_SYNC_POSEDGE
- | DRM_BUS_FLAG_PIXDATA_NEGEDGE;
+ dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH
+ | DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE
+ | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE;
omapdss_display_init(dssdev);
omapdss_device_register(dssdev);
@@ -5127,9 +5127,9 @@ static int dsi_init_output(struct dsi_data *dsi)
out->ops = &dsi_ops;
out->owner = THIS_MODULE;
out->of_ports = BIT(0);
- out->bus_flags = DRM_BUS_FLAG_PIXDATA_POSEDGE
+ out->bus_flags = DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE
| DRM_BUS_FLAG_DE_HIGH
- | DRM_BUS_FLAG_SYNC_NEGEDGE;
+ | DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE;
r = omapdss_device_init_output(out);
if (r < 0)
@@ -279,8 +279,8 @@ static int sdi_init_output(struct sdi_device *sdi)
out->of_ports = BIT(1);
out->ops = &sdi_ops;
out->owner = THIS_MODULE;
- out->bus_flags = DRM_BUS_FLAG_PIXDATA_POSEDGE /* 15.5.9.1.2 */
- | DRM_BUS_FLAG_SYNC_POSEDGE;
+ out->bus_flags = DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE /* 15.5.9.1.2 */
+ | DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE;
r = omapdss_device_init_output(out);
if (r < 0)
@@ -114,17 +114,17 @@ static void omap_encoder_mode_set(struct drm_encoder *encoder,
if (!(vm.flags & (DISPLAY_FLAGS_PIXDATA_POSEDGE |
DISPLAY_FLAGS_PIXDATA_NEGEDGE))) {
- if (bus_flags & DRM_BUS_FLAG_PIXDATA_POSEDGE)
+ if (bus_flags & DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE)
vm.flags |= DISPLAY_FLAGS_PIXDATA_POSEDGE;
- else if (bus_flags & DRM_BUS_FLAG_PIXDATA_NEGEDGE)
+ else if (bus_flags & DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE)
vm.flags |= DISPLAY_FLAGS_PIXDATA_NEGEDGE;
}
if (!(vm.flags & (DISPLAY_FLAGS_SYNC_POSEDGE |
DISPLAY_FLAGS_SYNC_NEGEDGE))) {
- if (bus_flags & DRM_BUS_FLAG_SYNC_POSEDGE)
+ if (bus_flags & DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE)
vm.flags |= DISPLAY_FLAGS_SYNC_POSEDGE;
- else if (bus_flags & DRM_BUS_FLAG_SYNC_NEGEDGE)
+ else if (bus_flags & DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE)
vm.flags |= DISPLAY_FLAGS_SYNC_NEGEDGE;
}
}
@@ -191,7 +191,7 @@ static const struct versatile_panel_type versatile_panels[] = {
.vrefresh = 390,
.flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC,
},
- .bus_flags = DRM_BUS_FLAG_PIXDATA_NEGEDGE,
+ .bus_flags = DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
},
/*
* Sanyo ALR252RGT 240x320 portrait display found on the
@@ -215,7 +215,7 @@ static const struct versatile_panel_type versatile_panels[] = {
.vrefresh = 116,
.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
},
- .bus_flags = DRM_BUS_FLAG_PIXDATA_NEGEDGE,
+ .bus_flags = DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
.ib2 = true,
},
};
@@ -412,11 +412,11 @@ static int ili9322_init(struct drm_panel *panel, struct ili9322 *ili)
if (ili->conf->dclk_active_high) {
reg = ILI9322_POL_DCLK;
connector->display_info.bus_flags |=
- DRM_BUS_FLAG_PIXDATA_POSEDGE;
+ DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE;
} else {
reg = 0;
connector->display_info.bus_flags |=
- DRM_BUS_FLAG_PIXDATA_NEGEDGE;
+ DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE;
}
if (ili->conf->de_active_high) {
reg |= ILI9322_POL_DE;
@@ -328,7 +328,7 @@ static const struct seiko_panel_desc seiko_43wvf1g = {
.height = 57,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
- .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_NEGEDGE,
+ .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
};
static const struct of_device_id platform_of_match[] = {
@@ -914,7 +914,7 @@ static const struct panel_desc cdtech_s043wq26h_ct7 = {
.width = 95,
.height = 54,
},
- .bus_flags = DRM_BUS_FLAG_PIXDATA_POSEDGE,
+ .bus_flags = DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE,
};
static const struct drm_display_mode cdtech_s070wv95_ct16_mode = {
@@ -1034,7 +1034,7 @@ static const struct panel_desc dataimage_scf0700c48ggu18 = {
.height = 91,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
- .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_POSEDGE,
+ .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE,
};
static const struct display_timing dlc_dlc0700yzg_1_timing = {
@@ -1119,7 +1119,7 @@ static const struct panel_desc edt_et057090dhu = {
.height = 86,
},
.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
- .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_NEGEDGE,
+ .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
};
static const struct drm_display_mode edt_etm0700g0dh6_mode = {
@@ -1145,7 +1145,7 @@ static const struct panel_desc edt_etm0700g0dh6 = {
.height = 91,
},
.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
- .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_NEGEDGE,
+ .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
};
static const struct panel_desc edt_etm0700g0bdh6 = {
@@ -1157,7 +1157,7 @@ static const struct panel_desc edt_etm0700g0bdh6 = {
.height = 91,
},
.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
- .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_POSEDGE,
+ .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE,
};
static const struct drm_display_mode foxlink_fl500wvr00_a0t_mode = {
@@ -1311,7 +1311,7 @@ static const struct panel_desc innolux_at043tn24 = {
.height = 54,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
- .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_POSEDGE,
+ .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE,
};
static const struct drm_display_mode innolux_at070tn92_mode = {
@@ -1818,7 +1818,7 @@ static const struct panel_desc nec_nl4827hc19_05b = {
.height = 54,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
- .bus_flags = DRM_BUS_FLAG_PIXDATA_POSEDGE,
+ .bus_flags = DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE,
};
static const struct drm_display_mode netron_dy_e231732_mode = {
@@ -1867,8 +1867,8 @@ static const struct panel_desc newhaven_nhd_43_480272ef_atxl = {
.height = 54,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
- .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_POSEDGE |
- DRM_BUS_FLAG_SYNC_POSEDGE,
+ .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE |
+ DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE,
};
static const struct display_timing nlt_nl192108ac18_02d_timing = {
@@ -2029,7 +2029,7 @@ static const struct panel_desc ortustech_com43h4m85ulc = {
.height = 93,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
- .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_POSEDGE,
+ .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE,
};
static const struct drm_display_mode pda_91_00156_a0_mode = {
@@ -2398,7 +2398,7 @@ static const struct panel_desc toshiba_lt089ac29000 = {
.height = 116,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
- .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_POSEDGE,
+ .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE,
};
static const struct drm_display_mode tpk_f07a_0102_mode = {
@@ -2421,7 +2421,7 @@ static const struct panel_desc tpk_f07a_0102 = {
.width = 152,
.height = 91,
},
- .bus_flags = DRM_BUS_FLAG_PIXDATA_POSEDGE,
+ .bus_flags = DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE,
};
static const struct drm_display_mode tpk_f10a_0102_mode = {
@@ -188,7 +188,7 @@ static void pl111_display_enable(struct drm_simple_display_pipe *pipe,
tim2 |= TIM2_IOE;
if (connector->display_info.bus_flags &
- DRM_BUS_FLAG_PIXDATA_NEGEDGE)
+ DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE)
tim2 |= TIM2_IPC;
}
@@ -561,10 +561,10 @@ static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon,
* Following code is a way to avoid quirks all around TCON
* and DOTCLOCK drivers.
*/
- if (display_info.bus_flags & DRM_BUS_FLAG_PIXDATA_POSEDGE)
+ if (display_info.bus_flags & DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE)
clk_set_phase(tcon->dclk, 240);
- if (display_info.bus_flags & DRM_BUS_FLAG_PIXDATA_NEGEDGE)
+ if (display_info.bus_flags & DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE)
clk_set_phase(tcon->dclk, 0);
regmap_update_bits(tcon->regs, SUN4I_TCON0_IO_POL_REG,
@@ -149,7 +149,8 @@ static void tve200_display_enable(struct drm_simple_display_pipe *pipe,
/* Vsync IRQ at start of Vsync at first */
ctrl1 |= TVE200_VSTSTYPE_VSYNC;
- if (connector->display_info.bus_flags & DRM_BUS_FLAG_PIXDATA_NEGEDGE)
+ if (connector->display_info.bus_flags &
+ DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE)
ctrl1 |= TVE200_CTRL_TVCLKP;
if ((mode->hdisplay == 352 && mode->vdisplay == 240) || /* SIF(525) */
@@ -246,10 +246,11 @@ struct drm_bridge_timings {
/**
* @sampling_edge:
*
- * Tells whether the bridge samples the digital input signal
- * from the display engine on the positive or negative edge of the
- * clock, this should reuse the DRM_BUS_FLAG_PIXDATA_[POS|NEG]EDGE
- * bitwise flags from the DRM connector (bit 2 and 3 valid).
+ * Tells whether the bridge samples the digital input signals from the
+ * display engine on the positive or negative edge of the clock. This
+ * should use the DRM_BUS_FLAG_PIXDATA_SAMPLE_[POS|NEG]EDGE and
+ * DRM_BUS_FLAG_SYNC_SAMPLE_[POS|NEG]EDGE bitwise flags from the DRM
+ * connector (bit 2, 3, 6 and 7 valid).
*/
u32 sampling_edge;
/**