diff mbox series

[v3,39/50] drm/bridge: ti-tfp410: Set connector type based on DT connector node

Message ID 20190211094705.2845-40-laurent.pinchart@ideasonboard.com (mailing list archive)
State New, archived
Headers show
Series omapdrm: drm_bridge and drm_panel support | expand

Commit Message

Laurent Pinchart Feb. 11, 2019, 9:46 a.m. UTC 
The TI TFP410 is a DVI encoder, not a full HDMI encoder. Its output can
be routed to a DVI-D connector, even if in many cases embedded systems
will use an HDMI connector to carry the DVI signals.

Instead of hardcoding the connector type to HDMI, retrieve the connector
type from its DT node.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Jyri Sarha <jsarha@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/gpu/drm/bridge/ti-tfp410.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/bridge/ti-tfp410.c b/drivers/gpu/drm/bridge/ti-tfp410.c
index 7bfb4f338813..daf0967e00ba 100644
--- a/drivers/gpu/drm/bridge/ti-tfp410.c
+++ b/drivers/gpu/drm/bridge/ti-tfp410.c
@@ -27,6 +27,7 @@ 
 struct tfp410 {
 	struct drm_bridge	bridge;
 	struct drm_connector	connector;
+	unsigned int		connector_type;
 
 	struct i2c_adapter	*ddc;
 	struct gpio_desc	*hpd;
@@ -126,7 +127,7 @@  static int tfp410_attach(struct drm_bridge *bridge)
 	drm_connector_helper_add(&dvi->connector,
 				 &tfp410_con_helper_funcs);
 	ret = drm_connector_init(bridge->dev, &dvi->connector,
-				 &tfp410_con_funcs, DRM_MODE_CONNECTOR_HDMIA);
+				 &tfp410_con_funcs, dvi->connector_type);
 	if (ret) {
 		dev_err(dvi->dev, "drm_connector_init() failed: %d\n", ret);
 		return ret;
@@ -172,6 +173,11 @@  static int tfp410_get_connector_properties(struct tfp410 *dvi)
 	if (!connector_node)
 		return -ENODEV;
 
+	if (of_device_is_compatible(connector_node, "hdmi-connector"))
+		dvi->connector_type = DRM_MODE_CONNECTOR_HDMIA;
+	else
+		dvi->connector_type = DRM_MODE_CONNECTOR_DVID;
+
 	dvi->hpd = fwnode_get_named_gpiod(&connector_node->fwnode,
 					"hpd-gpios", 0, GPIOD_IN, "hpd");
 	if (IS_ERR(dvi->hpd)) {