| Message ID | 20190214193236.7504-5-jagan@amarulasolutions.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | drm/sun4i: Allwinner MIPI-DSI Burst mode support | expand |
diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c index 4362d9df1da6..a4360aed17bf 100644 --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c @@ -402,9 +402,9 @@ static void sun6i_dsi_setup_burst(struct sun6i_dsi *dsi, struct mipi_dsi_device *device = dsi->device; u32 val = 0; - if ((mode->hsync_end - mode->hdisplay) > 20) { + if ((mode->hsync_start - mode->hdisplay) > 20) { /* Maaaaaagic */ - u16 drq = (mode->hsync_end - mode->hdisplay) - 20; + u16 drq = (mode->hsync_start - mode->hdisplay) - 20; drq *= mipi_dsi_pixel_format_to_bpp(device->format); drq /= 32;
TCON DRQ for non-burst DSI mode can computed based on horizontal front porch value, but the current driver trying to include sync timings along with front porch resulting wrong drq. This patch is trying to update the drq by subtracting hsync_start with hdisplay, which is horizontal front porch. Current code: ------------ mode->hsync_end - mode->hdisplay => horizontal front porch + sync With this patch: ---------------- mode->hsync_start - mode->hdisplay => horizontal front porch BSP code form BPI-M64-bsp is computing TCON DRQ set bits for non-burts as (from linux-sunxi/ drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c) => panel->lcd_ht - panel->lcd_x - panel->lcd_hbp => (timmings->hor_front_porch + panel->lcd_hbp + panel->lcd_x) - panel->lcd_x - panel->hbp => timmings->hor_front_porch => mode->hsync_start - mode->hdisplay So, update the DRQ set bits accordingly. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)