drm/vkms: Solve bug on kms_crc_cursor tests

Commit Message

Shayenne Moura Feb. 25, 2019, 2:26 p.m. UTC

vkms_crc_work_handle needs the value of the actual frame to
schedule the workqueue that calls periodically the vblank
handler and the destroy state functions. However, the frame
value returned from vkms_vblank_simulate is updated and
diminished in vblank_get_timestamp because it is not in a
vblank interrupt, and return an inaccurate value.

Solve this getting the actual vblank frame directly from the
vblank->count inside the `struct drm_crtc`, instead of using
the `drm_accurate_vblank_count` function.

Signed-off-by: Shayenne Moura <[e-mail]>
---
 drivers/gpu/drm/vkms/vkms_crc.c  | 4 +++-
 drivers/gpu/drm/vkms/vkms_crtc.c | 4 +++-
 2 files changed, 6 insertions(+), 2 deletions(-)

Comments

Rodrigo Siqueira Feb. 25, 2019, 9:48 p.m. UTC | #1

Hi,

First of all, thanks for your patch!

I think you figured out the reason for the extra frame problems :)

The patch worked like a charm. Almost all of the tests in kms_flip are
passing, and the tests related to kms_cursor_crc are working again \o/

I just have some cosmetic comments inline.

On 02/25, Shayenne Moura wrote:
> vkms_crc_work_handle needs the value of the actual frame to
> schedule the workqueue that calls periodically the vblank
> handler and the destroy state functions. However, the frame
> value returned from vkms_vblank_simulate is updated and
> diminished in vblank_get_timestamp because it is not in a
> vblank interrupt, and return an inaccurate value.
> 
> Solve this getting the actual vblank frame directly from the
> vblank->count inside the `struct drm_crtc`, instead of using
> the `drm_accurate_vblank_count` function.

AFAIU, I think the problem that you describe happens when
vkms_vblank_simulate() execute, because of the following steps:

1. Inside vkms_vblank_simulate() we call drm_crtc_accurate_vblank_count()
2. In its turn, drm_crtc_accurate_vblank_count() calls the function
   drm_update_vblank_count(dev, pipe, false).
3. Finally, the “false” used in drm_update_vblank_count(), will be
  passed to vkms_get_vblank_timestamp() and the condition “if
  (!in_vblank_irq)” will be executed multiple times (we don’t want it).

Am I correct? If so, I recommend you to add this level of detail about
the problem and the solution. Finally, IMHO you could change the commit
message for something that describes the problem related to the extra
decrement made by drm_crtc_accurate_vblank_count() inside
vkms_vblank_simulate().
 
> Signed-off-by: Shayenne Moura <[e-mail]>
> ---
>  drivers/gpu/drm/vkms/vkms_crc.c  | 4 +++-
>  drivers/gpu/drm/vkms/vkms_crtc.c | 4 +++-
>  2 files changed, 6 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/vkms/vkms_crc.c b/drivers/gpu/drm/vkms/vkms_crc.c
> index d7b409a3c0f8..09a8b00ef1f1 100644
> --- a/drivers/gpu/drm/vkms/vkms_crc.c
> +++ b/drivers/gpu/drm/vkms/vkms_crc.c
> @@ -161,6 +161,8 @@ void vkms_crc_work_handle(struct work_struct *work)
>  	struct vkms_output *out = drm_crtc_to_vkms_output(crtc);
>  	struct vkms_device *vdev = container_of(out, struct vkms_device,
>  						output);
> +	unsigned int pipe = drm_crtc_index(crtc);
> +	struct drm_vblank_crtc *vblank = &crtc->dev->vblank[pipe];
>  	struct vkms_crc_data *primary_crc = NULL;
>  	struct vkms_crc_data *cursor_crc = NULL;
>  	struct drm_plane *plane;
> @@ -196,7 +198,7 @@ void vkms_crc_work_handle(struct work_struct *work)
>  	if (primary_crc)
>  		crc32 = _vkms_get_crc(primary_crc, cursor_crc);
>  
> -	frame_end = drm_crtc_accurate_vblank_count(crtc);
> +	frame_end = vblank->count;
>  
>  	/* queue_work can fail to schedule crc_work; add crc for
>  	 * missing frames
> diff --git a/drivers/gpu/drm/vkms/vkms_crtc.c b/drivers/gpu/drm/vkms/vkms_crtc.c
> index 8a9aeb0a9ea8..9bf3268e2e92 100644
> --- a/drivers/gpu/drm/vkms/vkms_crtc.c
> +++ b/drivers/gpu/drm/vkms/vkms_crtc.c
> @@ -10,6 +10,8 @@ static enum hrtimer_restart vkms_vblank_simulate(struct hrtimer *timer)
>  						  vblank_hrtimer);
>  	struct drm_crtc *crtc = &output->crtc;
>  	struct vkms_crtc_state *state = to_vkms_crtc_state(crtc->state);
> +	unsigned int pipe = drm_crtc_index(crtc);
> +	struct drm_vblank_crtc *vblank = &crtc->dev->vblank[pipe];

How about have have a function for this operation?

Perhaps, someone here or in the dri-devel channel knows any helper
already available to get this information, try to ask in the channel.

Thanks

>  	u64 ret_overrun;
>  	bool ret;
>  
> @@ -20,7 +22,7 @@ static enum hrtimer_restart vkms_vblank_simulate(struct hrtimer *timer)
>  		DRM_ERROR("vkms failure on handling vblank");
>  
>  	if (state && output->crc_enabled) {
> -		u64 frame = drm_crtc_accurate_vblank_count(crtc);
> +		u64 frame = vblank->count;
>  
>  		/* update frame_start only if a queued vkms_crc_work_handle()
>  		 * has read the data
> -- 
> 2.17.1
>

Daniel Vetter Feb. 28, 2019, 10:11 a.m. UTC | #2

On Mon, Feb 25, 2019 at 11:26:06AM -0300, Shayenne Moura wrote:
> vkms_crc_work_handle needs the value of the actual frame to
> schedule the workqueue that calls periodically the vblank
> handler and the destroy state functions. However, the frame
> value returned from vkms_vblank_simulate is updated and
> diminished in vblank_get_timestamp because it is not in a
> vblank interrupt, and return an inaccurate value.
> 
> Solve this getting the actual vblank frame directly from the
> vblank->count inside the `struct drm_crtc`, instead of using
> the `drm_accurate_vblank_count` function.
> 
> Signed-off-by: Shayenne Moura <[e-mail]>

Sorry for the delay, I'm a bit swamped right now :-/

Debug work you're doing here is really impressive! But I have no idea
what's going on. It doesn't look like it's just papering over a bug (like
the in_vblank_irq check we've discussed on irc), but I also have no idea
why it works.

I'll pull in Ville, he understands this better than me.
-Daniel

> ---
>  drivers/gpu/drm/vkms/vkms_crc.c  | 4 +++-
>  drivers/gpu/drm/vkms/vkms_crtc.c | 4 +++-
>  2 files changed, 6 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/vkms/vkms_crc.c b/drivers/gpu/drm/vkms/vkms_crc.c
> index d7b409a3c0f8..09a8b00ef1f1 100644
> --- a/drivers/gpu/drm/vkms/vkms_crc.c
> +++ b/drivers/gpu/drm/vkms/vkms_crc.c
> @@ -161,6 +161,8 @@ void vkms_crc_work_handle(struct work_struct *work)
>  	struct vkms_output *out = drm_crtc_to_vkms_output(crtc);
>  	struct vkms_device *vdev = container_of(out, struct vkms_device,
>  						output);
> +	unsigned int pipe = drm_crtc_index(crtc);
> +	struct drm_vblank_crtc *vblank = &crtc->dev->vblank[pipe];
>  	struct vkms_crc_data *primary_crc = NULL;
>  	struct vkms_crc_data *cursor_crc = NULL;
>  	struct drm_plane *plane;
> @@ -196,7 +198,7 @@ void vkms_crc_work_handle(struct work_struct *work)
>  	if (primary_crc)
>  		crc32 = _vkms_get_crc(primary_crc, cursor_crc);
>  
> -	frame_end = drm_crtc_accurate_vblank_count(crtc);
> +	frame_end = vblank->count;
>  
>  	/* queue_work can fail to schedule crc_work; add crc for
>  	 * missing frames
> diff --git a/drivers/gpu/drm/vkms/vkms_crtc.c b/drivers/gpu/drm/vkms/vkms_crtc.c
> index 8a9aeb0a9ea8..9bf3268e2e92 100644
> --- a/drivers/gpu/drm/vkms/vkms_crtc.c
> +++ b/drivers/gpu/drm/vkms/vkms_crtc.c
> @@ -10,6 +10,8 @@ static enum hrtimer_restart vkms_vblank_simulate(struct hrtimer *timer)
>  						  vblank_hrtimer);
>  	struct drm_crtc *crtc = &output->crtc;
>  	struct vkms_crtc_state *state = to_vkms_crtc_state(crtc->state);
> +	unsigned int pipe = drm_crtc_index(crtc);
> +	struct drm_vblank_crtc *vblank = &crtc->dev->vblank[pipe];
>  	u64 ret_overrun;
>  	bool ret;
>  
> @@ -20,7 +22,7 @@ static enum hrtimer_restart vkms_vblank_simulate(struct hrtimer *timer)
>  		DRM_ERROR("vkms failure on handling vblank");
>  
>  	if (state && output->crc_enabled) {
> -		u64 frame = drm_crtc_accurate_vblank_count(crtc);
> +		u64 frame = vblank->count;
>  
>  		/* update frame_start only if a queued vkms_crc_work_handle()
>  		 * has read the data
> -- 
> 2.17.1
>

Daniel Vetter Feb. 28, 2019, 10:14 a.m. UTC | #3

On Thu, Feb 28, 2019 at 11:11:07AM +0100, Daniel Vetter wrote:
> On Mon, Feb 25, 2019 at 11:26:06AM -0300, Shayenne Moura wrote:
> > vkms_crc_work_handle needs the value of the actual frame to
> > schedule the workqueue that calls periodically the vblank
> > handler and the destroy state functions. However, the frame
> > value returned from vkms_vblank_simulate is updated and
> > diminished in vblank_get_timestamp because it is not in a
> > vblank interrupt, and return an inaccurate value.
> > 
> > Solve this getting the actual vblank frame directly from the
> > vblank->count inside the `struct drm_crtc`, instead of using
> > the `drm_accurate_vblank_count` function.
> > 
> > Signed-off-by: Shayenne Moura <[e-mail]>
> 
> Sorry for the delay, I'm a bit swamped right now :-/
> 
> Debug work you're doing here is really impressive! But I have no idea
> what's going on. It doesn't look like it's just papering over a bug (like
> the in_vblank_irq check we've discussed on irc), but I also have no idea
> why it works.
> 
> I'll pull in Ville, he understands this better than me.

Works better if I actually add Ville ...
-Daniel

Ville Syrjälä Feb. 28, 2019, 2:03 p.m. UTC | #4

On Thu, Feb 28, 2019 at 11:11:07AM +0100, Daniel Vetter wrote:
> On Mon, Feb 25, 2019 at 11:26:06AM -0300, Shayenne Moura wrote:
> > vkms_crc_work_handle needs the value of the actual frame to
> > schedule the workqueue that calls periodically the vblank
> > handler and the destroy state functions. However, the frame
> > value returned from vkms_vblank_simulate is updated and
> > diminished in vblank_get_timestamp because it is not in a
> > vblank interrupt, and return an inaccurate value.
> > 
> > Solve this getting the actual vblank frame directly from the
> > vblank->count inside the `struct drm_crtc`, instead of using
> > the `drm_accurate_vblank_count` function.
> > 
> > Signed-off-by: Shayenne Moura <[e-mail]>
> 
> Sorry for the delay, I'm a bit swamped right now :-/
> 
> Debug work you're doing here is really impressive! But I have no idea
> what's going on. It doesn't look like it's just papering over a bug (like
> the in_vblank_irq check we've discussed on irc), but I also have no idea
> why it works.
> 
> I'll pull in Ville, he understands this better than me.

It's not entirely clear what we're trying to fix. From what I can see
the crc work seems to be in no way synchronized with page flips, so
I'm not sure how all this is really supposed to work.

> -Daniel
> 
> > ---
> >  drivers/gpu/drm/vkms/vkms_crc.c  | 4 +++-
> >  drivers/gpu/drm/vkms/vkms_crtc.c | 4 +++-
> >  2 files changed, 6 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/vkms/vkms_crc.c b/drivers/gpu/drm/vkms/vkms_crc.c
> > index d7b409a3c0f8..09a8b00ef1f1 100644
> > --- a/drivers/gpu/drm/vkms/vkms_crc.c
> > +++ b/drivers/gpu/drm/vkms/vkms_crc.c
> > @@ -161,6 +161,8 @@ void vkms_crc_work_handle(struct work_struct *work)
> >  	struct vkms_output *out = drm_crtc_to_vkms_output(crtc);
> >  	struct vkms_device *vdev = container_of(out, struct vkms_device,
> >  						output);
> > +	unsigned int pipe = drm_crtc_index(crtc);
> > +	struct drm_vblank_crtc *vblank = &crtc->dev->vblank[pipe];
> >  	struct vkms_crc_data *primary_crc = NULL;
> >  	struct vkms_crc_data *cursor_crc = NULL;
> >  	struct drm_plane *plane;
> > @@ -196,7 +198,7 @@ void vkms_crc_work_handle(struct work_struct *work)
> >  	if (primary_crc)
> >  		crc32 = _vkms_get_crc(primary_crc, cursor_crc);
> >  
> > -	frame_end = drm_crtc_accurate_vblank_count(crtc);
> > +	frame_end = vblank->count;
> >  
> >  	/* queue_work can fail to schedule crc_work; add crc for
> >  	 * missing frames
> > diff --git a/drivers/gpu/drm/vkms/vkms_crtc.c b/drivers/gpu/drm/vkms/vkms_crtc.c
> > index 8a9aeb0a9ea8..9bf3268e2e92 100644
> > --- a/drivers/gpu/drm/vkms/vkms_crtc.c
> > +++ b/drivers/gpu/drm/vkms/vkms_crtc.c
> > @@ -10,6 +10,8 @@ static enum hrtimer_restart vkms_vblank_simulate(struct hrtimer *timer)
> >  						  vblank_hrtimer);
> >  	struct drm_crtc *crtc = &output->crtc;
> >  	struct vkms_crtc_state *state = to_vkms_crtc_state(crtc->state);
> > +	unsigned int pipe = drm_crtc_index(crtc);
> > +	struct drm_vblank_crtc *vblank = &crtc->dev->vblank[pipe];
> >  	u64 ret_overrun;
> >  	bool ret;
> >  
> > @@ -20,7 +22,7 @@ static enum hrtimer_restart vkms_vblank_simulate(struct hrtimer *timer)
> >  		DRM_ERROR("vkms failure on handling vblank");
> >  
> >  	if (state && output->crc_enabled) {
> > -		u64 frame = drm_crtc_accurate_vblank_count(crtc);
> > +		u64 frame = vblank->count;
> >  
> >  		/* update frame_start only if a queued vkms_crc_work_handle()
> >  		 * has read the data
> > -- 
> > 2.17.1
> > 
> 
> -- 
> Daniel Vetter
> Software Engineer, Intel Corporation
> http://blog.ffwll.ch
> _______________________________________________
> dri-devel mailing list
> [e-mail]
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

Shayenne Moura March 1, 2019, 2:55 p.m. UTC | #5

Em qui, 28 de fev de 2019 às 11:03, Ville Syrjälä
<[e-mail]> escreveu:
>
> On Thu, Feb 28, 2019 at 11:11:07AM +0100, Daniel Vetter wrote:
> > On Mon, Feb 25, 2019 at 11:26:06AM -0300, Shayenne Moura wrote:
> > > vkms_crc_work_handle needs the value of the actual frame to
> > > schedule the workqueue that calls periodically the vblank
> > > handler and the destroy state functions. However, the frame
> > > value returned from vkms_vblank_simulate is updated and
> > > diminished in vblank_get_timestamp because it is not in a
> > > vblank interrupt, and return an inaccurate value.
> > >
> > > Solve this getting the actual vblank frame directly from the
> > > vblank->count inside the `struct drm_crtc`, instead of using
> > > the `drm_accurate_vblank_count` function.
> > >
> > > Signed-off-by: Shayenne Moura <[e-mail]>
> >
> > Sorry for the delay, I'm a bit swamped right now :-/
> >
> > Debug work you're doing here is really impressive! But I have no idea
> > what's going on. It doesn't look like it's just papering over a bug (like
> > the in_vblank_irq check we've discussed on irc), but I also have no idea
> > why it works.
> >
> > I'll pull in Ville, he understands this better than me.
>
> It's not entirely clear what we're trying to fix. From what I can see
> the crc work seems to be in no way synchronized with page flips, so
> I'm not sure how all this is really supposed to work.
>

Hi, Ville!

Thank you for the review! :)

I do not understand well what crc code is doing, but the issue that I found
is related to the vblank timestamp and frame count.

When vkms handles the crc_cursor it uses the start frame and end frame
values to verify if it needs to call the function 'drm_crtc_add_crc_entry()'
for each frame.

However, when getting the frame count, the code is calling the function
drm_update_vblank_count(dev, pipe, false) and, because of the 'false',
subtracting the actual vblank timestamp (consequently, the frame count
value), causing conflicts.

Does it make sense? I am not sure about this crc code behavior.

Shayenne

> > -Daniel
> >
> > > ---
> > >  drivers/gpu/drm/vkms/vkms_crc.c  | 4 +++-
> > >  drivers/gpu/drm/vkms/vkms_crtc.c | 4 +++-
> > >  2 files changed, 6 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/vkms/vkms_crc.c b/drivers/gpu/drm/vkms/vkms_crc.c
> > > index d7b409a3c0f8..09a8b00ef1f1 100644
> > > --- a/drivers/gpu/drm/vkms/vkms_crc.c
> > > +++ b/drivers/gpu/drm/vkms/vkms_crc.c
> > > @@ -161,6 +161,8 @@ void vkms_crc_work_handle(struct work_struct *work)
> > >     struct vkms_output *out = drm_crtc_to_vkms_output(crtc);
> > >     struct vkms_device *vdev = container_of(out, struct vkms_device,
> > >                                             output);
> > > +   unsigned int pipe = drm_crtc_index(crtc);
> > > +   struct drm_vblank_crtc *vblank = &crtc->dev->vblank[pipe];
> > >     struct vkms_crc_data *primary_crc = NULL;
> > >     struct vkms_crc_data *cursor_crc = NULL;
> > >     struct drm_plane *plane;
> > > @@ -196,7 +198,7 @@ void vkms_crc_work_handle(struct work_struct *work)
> > >     if (primary_crc)
> > >             crc32 = _vkms_get_crc(primary_crc, cursor_crc);
> > >
> > > -   frame_end = drm_crtc_accurate_vblank_count(crtc);
> > > +   frame_end = vblank->count;
> > >
> > >     /* queue_work can fail to schedule crc_work; add crc for
> > >      * missing frames
> > > diff --git a/drivers/gpu/drm/vkms/vkms_crtc.c b/drivers/gpu/drm/vkms/vkms_crtc.c
> > > index 8a9aeb0a9ea8..9bf3268e2e92 100644
> > > --- a/drivers/gpu/drm/vkms/vkms_crtc.c
> > > +++ b/drivers/gpu/drm/vkms/vkms_crtc.c
> > > @@ -10,6 +10,8 @@ static enum hrtimer_restart vkms_vblank_simulate(struct hrtimer *timer)
> > >                                               vblank_hrtimer);
> > >     struct drm_crtc *crtc = &output->crtc;
> > >     struct vkms_crtc_state *state = to_vkms_crtc_state(crtc->state);
> > > +   unsigned int pipe = drm_crtc_index(crtc);
> > > +   struct drm_vblank_crtc *vblank = &crtc->dev->vblank[pipe];
> > >     u64 ret_overrun;
> > >     bool ret;
> > >
> > > @@ -20,7 +22,7 @@ static enum hrtimer_restart vkms_vblank_simulate(struct hrtimer *timer)
> > >             DRM_ERROR("vkms failure on handling vblank");
> > >
> > >     if (state && output->crc_enabled) {
> > > -           u64 frame = drm_crtc_accurate_vblank_count(crtc);
> > > +           u64 frame = vblank->count;
> > >
> > >             /* update frame_start only if a queued vkms_crc_work_handle()
> > >              * has read the data
> > > --
> > > 2.17.1
> > >
> >
> > --
> > Daniel Vetter
> > Software Engineer, Intel Corporation
> > http://blog.ffwll.ch
> > _______________________________________________
> > dri-devel mailing list
> > [e-mail]
> > https://lists.freedesktop.org/mailman/listinfo/dri-devel
>
> --
> Ville Syrjälä
> Intel

Ville Syrjälä March 1, 2019, 3:25 p.m. UTC | #6

On Fri, Mar 01, 2019 at 11:55:11AM -0300, Shayenne Moura wrote:
> Em qui, 28 de fev de 2019 às 11:03, Ville Syrjälä
> <[e-mail]> escreveu:
> >
> > On Thu, Feb 28, 2019 at 11:11:07AM +0100, Daniel Vetter wrote:
> > > On Mon, Feb 25, 2019 at 11:26:06AM -0300, Shayenne Moura wrote:
> > > > vkms_crc_work_handle needs the value of the actual frame to
> > > > schedule the workqueue that calls periodically the vblank
> > > > handler and the destroy state functions. However, the frame
> > > > value returned from vkms_vblank_simulate is updated and
> > > > diminished in vblank_get_timestamp because it is not in a
> > > > vblank interrupt, and return an inaccurate value.
> > > >
> > > > Solve this getting the actual vblank frame directly from the
> > > > vblank->count inside the `struct drm_crtc`, instead of using
> > > > the `drm_accurate_vblank_count` function.
> > > >
> > > > Signed-off-by: Shayenne Moura <[e-mail]>
> > >
> > > Sorry for the delay, I'm a bit swamped right now :-/
> > >
> > > Debug work you're doing here is really impressive! But I have no idea
> > > what's going on. It doesn't look like it's just papering over a bug (like
> > > the in_vblank_irq check we've discussed on irc), but I also have no idea
> > > why it works.
> > >
> > > I'll pull in Ville, he understands this better than me.
> >
> > It's not entirely clear what we're trying to fix. From what I can see
> > the crc work seems to be in no way synchronized with page flips, so
> > I'm not sure how all this is really supposed to work.
> >
> 
> Hi, Ville!
> 
> Thank you for the review! :)
> 
> I do not understand well what crc code is doing, but the issue that I found
> is related to the vblank timestamp and frame count.
> 
> When vkms handles the crc_cursor it uses the start frame and end frame
> values to verify if it needs to call the function 'drm_crtc_add_crc_entry()'
> for each frame.
> 
> However, when getting the frame count, the code is calling the function
> drm_update_vblank_count(dev, pipe, false) and, because of the 'false',
> subtracting the actual vblank timestamp (consequently, the frame count
> value), causing conflicts.

The in_vblank_irq behavour looks sane to me. What are these conflicts?

> 
> Does it make sense? I am not sure about this crc code behavior.
> 
> Shayenne
> 
> > > -Daniel
> > >
> > > > ---
> > > >  drivers/gpu/drm/vkms/vkms_crc.c  | 4 +++-
> > > >  drivers/gpu/drm/vkms/vkms_crtc.c | 4 +++-
> > > >  2 files changed, 6 insertions(+), 2 deletions(-)
> > > >
> > > > diff --git a/drivers/gpu/drm/vkms/vkms_crc.c b/drivers/gpu/drm/vkms/vkms_crc.c
> > > > index d7b409a3c0f8..09a8b00ef1f1 100644
> > > > --- a/drivers/gpu/drm/vkms/vkms_crc.c
> > > > +++ b/drivers/gpu/drm/vkms/vkms_crc.c
> > > > @@ -161,6 +161,8 @@ void vkms_crc_work_handle(struct work_struct *work)
> > > >     struct vkms_output *out = drm_crtc_to_vkms_output(crtc);
> > > >     struct vkms_device *vdev = container_of(out, struct vkms_device,
> > > >                                             output);
> > > > +   unsigned int pipe = drm_crtc_index(crtc);
> > > > +   struct drm_vblank_crtc *vblank = &crtc->dev->vblank[pipe];
> > > >     struct vkms_crc_data *primary_crc = NULL;
> > > >     struct vkms_crc_data *cursor_crc = NULL;
> > > >     struct drm_plane *plane;
> > > > @@ -196,7 +198,7 @@ void vkms_crc_work_handle(struct work_struct *work)
> > > >     if (primary_crc)
> > > >             crc32 = _vkms_get_crc(primary_crc, cursor_crc);
> > > >
> > > > -   frame_end = drm_crtc_accurate_vblank_count(crtc);
> > > > +   frame_end = vblank->count;
> > > >
> > > >     /* queue_work can fail to schedule crc_work; add crc for
> > > >      * missing frames
> > > > diff --git a/drivers/gpu/drm/vkms/vkms_crtc.c b/drivers/gpu/drm/vkms/vkms_crtc.c
> > > > index 8a9aeb0a9ea8..9bf3268e2e92 100644
> > > > --- a/drivers/gpu/drm/vkms/vkms_crtc.c
> > > > +++ b/drivers/gpu/drm/vkms/vkms_crtc.c
> > > > @@ -10,6 +10,8 @@ static enum hrtimer_restart vkms_vblank_simulate(struct hrtimer *timer)
> > > >                                               vblank_hrtimer);
> > > >     struct drm_crtc *crtc = &output->crtc;
> > > >     struct vkms_crtc_state *state = to_vkms_crtc_state(crtc->state);
> > > > +   unsigned int pipe = drm_crtc_index(crtc);
> > > > +   struct drm_vblank_crtc *vblank = &crtc->dev->vblank[pipe];
> > > >     u64 ret_overrun;
> > > >     bool ret;
> > > >
> > > > @@ -20,7 +22,7 @@ static enum hrtimer_restart vkms_vblank_simulate(struct hrtimer *timer)
> > > >             DRM_ERROR("vkms failure on handling vblank");
> > > >
> > > >     if (state && output->crc_enabled) {
> > > > -           u64 frame = drm_crtc_accurate_vblank_count(crtc);
> > > > +           u64 frame = vblank->count;
> > > >
> > > >             /* update frame_start only if a queued vkms_crc_work_handle()
> > > >              * has read the data
> > > > --
> > > > 2.17.1
> > > >
> > >
> > > --
> > > Daniel Vetter
> > > Software Engineer, Intel Corporation
> > > http://blog.ffwll.ch
> > > _______________________________________________
> > > dri-devel mailing list
> > > [e-mail]
> > > https://lists.freedesktop.org/mailman/listinfo/dri-devel
> >
> > --
> > Ville Syrjälä
> > Intel

Shayenne Moura March 1, 2019, 6:35 p.m. UTC | #7

Em sex, 1 de mar de 2019 às 12:26, Ville Syrjälä
<[e-mail]> escreveu:
>
> On Fri, Mar 01, 2019 at 11:55:11AM -0300, Shayenne Moura wrote:
> > Em qui, 28 de fev de 2019 às 11:03, Ville Syrjälä
> > <[e-mail]> escreveu:
> > >
> > > On Thu, Feb 28, 2019 at 11:11:07AM +0100, Daniel Vetter wrote:
> > > > On Mon, Feb 25, 2019 at 11:26:06AM -0300, Shayenne Moura wrote:
> > > > > vkms_crc_work_handle needs the value of the actual frame to
> > > > > schedule the workqueue that calls periodically the vblank
> > > > > handler and the destroy state functions. However, the frame
> > > > > value returned from vkms_vblank_simulate is updated and
> > > > > diminished in vblank_get_timestamp because it is not in a
> > > > > vblank interrupt, and return an inaccurate value.
> > > > >
> > > > > Solve this getting the actual vblank frame directly from the
> > > > > vblank->count inside the `struct drm_crtc`, instead of using
> > > > > the `drm_accurate_vblank_count` function.
> > > > >
> > > > > Signed-off-by: Shayenne Moura <[e-mail]>
> > > >
> > > > Sorry for the delay, I'm a bit swamped right now :-/
> > > >
> > > > Debug work you're doing here is really impressive! But I have no idea
> > > > what's going on. It doesn't look like it's just papering over a bug (like
> > > > the in_vblank_irq check we've discussed on irc), but I also have no idea
> > > > why it works.
> > > >
> > > > I'll pull in Ville, he understands this better than me.
> > >
> > > It's not entirely clear what we're trying to fix. From what I can see
> > > the crc work seems to be in no way synchronized with page flips, so
> > > I'm not sure how all this is really supposed to work.
> > >
> >
> > Hi, Ville!
> >
> > Thank you for the review! :)
> >
> > I do not understand well what crc code is doing, but the issue that I found
> > is related to the vblank timestamp and frame count.
> >
> > When vkms handles the crc_cursor it uses the start frame and end frame
> > values to verify if it needs to call the function 'drm_crtc_add_crc_entry()'
> > for each frame.
> >
> > However, when getting the frame count, the code is calling the function
> > drm_update_vblank_count(dev, pipe, false) and, because of the 'false',
> > subtracting the actual vblank timestamp (consequently, the frame count
> > value), causing conflicts.
>
> The in_vblank_irq behavour looks sane to me. What are these conflicts?
>

The entire history was:
 - I sent the patch with bugfix for vblank extra frame. The patch changed
   our function vkms_get_vblank_timestamp() to look like this:

bool vkms_get_vblank_timestamp(struct drm_device *dev, unsigned int pipe,
                   int *max_error, ktime_t *vblank_time,
                   bool in_vblank_irq)
{
    struct vkms_device *vkmsdev = drm_device_to_vkms_device(dev);
    struct vkms_output *output = &vkmsdev->output;

    *vblank_time = output->vblank_hrtimer.node.expires;

+   if (!in_vblank_irq)
+        *vblank_time -= output->period_ns;

    return true;
}

 - This patch solve the issue that I was looking for (extra vblank
frames on kms_flip).

 - However, kms_cursor_crc tests, which passed before my patch, started to fail.

 - Debugging them, I found that the problem was inside of function
`vkms_vblank_simulate()`
when it was handling the crc_enabled (inside  if (state && output->crc_enabled))
and inside the function vkms_crc_work_handle() too.

 - Following the steps:
1. Inside vkms_vblank_simulate() we call drm_crtc_accurate_vblank_count()
2. In its turn, drm_crtc_accurate_vblank_count() calls the function
   drm_update_vblank_count(dev, pipe, false).  /* This false is default */
3. Finally, the “false” used in drm_update_vblank_count(), will be
  passed to vkms_get_vblank_timestamp() and the condition “if
  (!in_vblank_irq)” will be executed multiple times (we don’t want it).

 - Inside vkms_crc, the issue is that the returned frame value change for
every call of drm_crtc_accurate_vblank_count() because
in_vblank_irq == false.

 - To solve this, I used the value already calculated on vblank->count,
instead of using the helper function that updates the value.

Shayenne

> >
> > Does it make sense? I am not sure about this crc code behavior.
> >
> > Shayenne
> >
> > > > -Daniel
> > > >
> > > > > ---
> > > > >  drivers/gpu/drm/vkms/vkms_crc.c  | 4 +++-
> > > > >  drivers/gpu/drm/vkms/vkms_crtc.c | 4 +++-
> > > > >  2 files changed, 6 insertions(+), 2 deletions(-)
> > > > >
> > > > > diff --git a/drivers/gpu/drm/vkms/vkms_crc.c b/drivers/gpu/drm/vkms/vkms_crc.c
> > > > > index d7b409a3c0f8..09a8b00ef1f1 100644
> > > > > --- a/drivers/gpu/drm/vkms/vkms_crc.c
> > > > > +++ b/drivers/gpu/drm/vkms/vkms_crc.c
> > > > > @@ -161,6 +161,8 @@ void vkms_crc_work_handle(struct work_struct *work)
> > > > >     struct vkms_output *out = drm_crtc_to_vkms_output(crtc);
> > > > >     struct vkms_device *vdev = container_of(out, struct vkms_device,
> > > > >                                             output);
> > > > > +   unsigned int pipe = drm_crtc_index(crtc);
> > > > > +   struct drm_vblank_crtc *vblank = &crtc->dev->vblank[pipe];
> > > > >     struct vkms_crc_data *primary_crc = NULL;
> > > > >     struct vkms_crc_data *cursor_crc = NULL;
> > > > >     struct drm_plane *plane;
> > > > > @@ -196,7 +198,7 @@ void vkms_crc_work_handle(struct work_struct *work)
> > > > >     if (primary_crc)
> > > > >             crc32 = _vkms_get_crc(primary_crc, cursor_crc);
> > > > >
> > > > > -   frame_end = drm_crtc_accurate_vblank_count(crtc);
> > > > > +   frame_end = vblank->count;
> > > > >
> > > > >     /* queue_work can fail to schedule crc_work; add crc for
> > > > >      * missing frames
> > > > > diff --git a/drivers/gpu/drm/vkms/vkms_crtc.c b/drivers/gpu/drm/vkms/vkms_crtc.c
> > > > > index 8a9aeb0a9ea8..9bf3268e2e92 100644
> > > > > --- a/drivers/gpu/drm/vkms/vkms_crtc.c
> > > > > +++ b/drivers/gpu/drm/vkms/vkms_crtc.c
> > > > > @@ -10,6 +10,8 @@ static enum hrtimer_restart vkms_vblank_simulate(struct hrtimer *timer)
> > > > >                                               vblank_hrtimer);
> > > > >     struct drm_crtc *crtc = &output->crtc;
> > > > >     struct vkms_crtc_state *state = to_vkms_crtc_state(crtc->state);
> > > > > +   unsigned int pipe = drm_crtc_index(crtc);
> > > > > +   struct drm_vblank_crtc *vblank = &crtc->dev->vblank[pipe];
> > > > >     u64 ret_overrun;
> > > > >     bool ret;
> > > > >
> > > > > @@ -20,7 +22,7 @@ static enum hrtimer_restart vkms_vblank_simulate(struct hrtimer *timer)
> > > > >             DRM_ERROR("vkms failure on handling vblank");
> > > > >
> > > > >     if (state && output->crc_enabled) {
> > > > > -           u64 frame = drm_crtc_accurate_vblank_count(crtc);
> > > > > +           u64 frame = vblank->count;
> > > > >
> > > > >             /* update frame_start only if a queued vkms_crc_work_handle()
> > > > >              * has read the data
> > > > > --
> > > > > 2.17.1
> > > > >
> > > >
> > > > --
> > > > Daniel Vetter
> > > > Software Engineer, Intel Corporation
> > > > http://blog.ffwll.ch
> > > > _______________________________________________
> > > > dri-devel mailing list
> > > > [e-mail]
> > > > https://lists.freedesktop.org/mailman/listinfo/dri-devel
> > >
> > > --
> > > Ville Syrjälä
> > > Intel
>
> --
> Ville Syrjälä
> Intel

Ville Syrjälä March 1, 2019, 6:41 p.m. UTC | #8

On Fri, Mar 01, 2019 at 03:35:35PM -0300, Shayenne Moura wrote:
> Em sex, 1 de mar de 2019 às 12:26, Ville Syrjälä
> <[e-mail]> escreveu:
> >
> > On Fri, Mar 01, 2019 at 11:55:11AM -0300, Shayenne Moura wrote:
> > > Em qui, 28 de fev de 2019 às 11:03, Ville Syrjälä
> > > <[e-mail]> escreveu:
> > > >
> > > > On Thu, Feb 28, 2019 at 11:11:07AM +0100, Daniel Vetter wrote:
> > > > > On Mon, Feb 25, 2019 at 11:26:06AM -0300, Shayenne Moura wrote:
> > > > > > vkms_crc_work_handle needs the value of the actual frame to
> > > > > > schedule the workqueue that calls periodically the vblank
> > > > > > handler and the destroy state functions. However, the frame
> > > > > > value returned from vkms_vblank_simulate is updated and
> > > > > > diminished in vblank_get_timestamp because it is not in a
> > > > > > vblank interrupt, and return an inaccurate value.
> > > > > >
> > > > > > Solve this getting the actual vblank frame directly from the
> > > > > > vblank->count inside the `struct drm_crtc`, instead of using
> > > > > > the `drm_accurate_vblank_count` function.
> > > > > >
> > > > > > Signed-off-by: Shayenne Moura <[e-mail]>
> > > > >
> > > > > Sorry for the delay, I'm a bit swamped right now :-/
> > > > >
> > > > > Debug work you're doing here is really impressive! But I have no idea
> > > > > what's going on. It doesn't look like it's just papering over a bug (like
> > > > > the in_vblank_irq check we've discussed on irc), but I also have no idea
> > > > > why it works.
> > > > >
> > > > > I'll pull in Ville, he understands this better than me.
> > > >
> > > > It's not entirely clear what we're trying to fix. From what I can see
> > > > the crc work seems to be in no way synchronized with page flips, so
> > > > I'm not sure how all this is really supposed to work.
> > > >
> > >
> > > Hi, Ville!
> > >
> > > Thank you for the review! :)
> > >
> > > I do not understand well what crc code is doing, but the issue that I found
> > > is related to the vblank timestamp and frame count.
> > >
> > > When vkms handles the crc_cursor it uses the start frame and end frame
> > > values to verify if it needs to call the function 'drm_crtc_add_crc_entry()'
> > > for each frame.
> > >
> > > However, when getting the frame count, the code is calling the function
> > > drm_update_vblank_count(dev, pipe, false) and, because of the 'false',
> > > subtracting the actual vblank timestamp (consequently, the frame count
> > > value), causing conflicts.
> >
> > The in_vblank_irq behavour looks sane to me. What are these conflicts?
> >
> 
> The entire history was:
>  - I sent the patch with bugfix for vblank extra frame. The patch changed
>    our function vkms_get_vblank_timestamp() to look like this:
> 
> bool vkms_get_vblank_timestamp(struct drm_device *dev, unsigned int pipe,
>                    int *max_error, ktime_t *vblank_time,
>                    bool in_vblank_irq)
> {
>     struct vkms_device *vkmsdev = drm_device_to_vkms_device(dev);
>     struct vkms_output *output = &vkmsdev->output;
> 
>     *vblank_time = output->vblank_hrtimer.node.expires;
> 
> +   if (!in_vblank_irq)
> +        *vblank_time -= output->period_ns;
> 
>     return true;
> }
> 
>  - This patch solve the issue that I was looking for (extra vblank
> frames on kms_flip).
> 
>  - However, kms_cursor_crc tests, which passed before my patch, started to fail.
> 
>  - Debugging them, I found that the problem was inside of function
> `vkms_vblank_simulate()`
> when it was handling the crc_enabled (inside  if (state && output->crc_enabled))
> and inside the function vkms_crc_work_handle() too.
> 
>  - Following the steps:
> 1. Inside vkms_vblank_simulate() we call drm_crtc_accurate_vblank_count()
> 2. In its turn, drm_crtc_accurate_vblank_count() calls the function
>    drm_update_vblank_count(dev, pipe, false).  /* This false is default */
> 3. Finally, the “false” used in drm_update_vblank_count(), will be
>   passed to vkms_get_vblank_timestamp() and the condition “if
>   (!in_vblank_irq)” will be executed multiple times (we don’t want it).
> 
>  - Inside vkms_crc, the issue is that the returned frame value change for
> every call of drm_crtc_accurate_vblank_count() because
> in_vblank_irq == false.

OK. So why is it changing? AFAICS it should not change unless the
timer was moved forward in between the calls.

> 
>  - To solve this, I used the value already calculated on vblank->count,
> instead of using the helper function that updates the value.
> 
> Shayenne
> 
> > >
> > > Does it make sense? I am not sure about this crc code behavior.
> > >
> > > Shayenne
> > >
> > > > > -Daniel
> > > > >
> > > > > > ---
> > > > > >  drivers/gpu/drm/vkms/vkms_crc.c  | 4 +++-
> > > > > >  drivers/gpu/drm/vkms/vkms_crtc.c | 4 +++-
> > > > > >  2 files changed, 6 insertions(+), 2 deletions(-)
> > > > > >
> > > > > > diff --git a/drivers/gpu/drm/vkms/vkms_crc.c b/drivers/gpu/drm/vkms/vkms_crc.c
> > > > > > index d7b409a3c0f8..09a8b00ef1f1 100644
> > > > > > --- a/drivers/gpu/drm/vkms/vkms_crc.c
> > > > > > +++ b/drivers/gpu/drm/vkms/vkms_crc.c
> > > > > > @@ -161,6 +161,8 @@ void vkms_crc_work_handle(struct work_struct *work)
> > > > > >     struct vkms_output *out = drm_crtc_to_vkms_output(crtc);
> > > > > >     struct vkms_device *vdev = container_of(out, struct vkms_device,
> > > > > >                                             output);
> > > > > > +   unsigned int pipe = drm_crtc_index(crtc);
> > > > > > +   struct drm_vblank_crtc *vblank = &crtc->dev->vblank[pipe];
> > > > > >     struct vkms_crc_data *primary_crc = NULL;
> > > > > >     struct vkms_crc_data *cursor_crc = NULL;
> > > > > >     struct drm_plane *plane;
> > > > > > @@ -196,7 +198,7 @@ void vkms_crc_work_handle(struct work_struct *work)
> > > > > >     if (primary_crc)
> > > > > >             crc32 = _vkms_get_crc(primary_crc, cursor_crc);
> > > > > >
> > > > > > -   frame_end = drm_crtc_accurate_vblank_count(crtc);
> > > > > > +   frame_end = vblank->count;
> > > > > >
> > > > > >     /* queue_work can fail to schedule crc_work; add crc for
> > > > > >      * missing frames
> > > > > > diff --git a/drivers/gpu/drm/vkms/vkms_crtc.c b/drivers/gpu/drm/vkms/vkms_crtc.c
> > > > > > index 8a9aeb0a9ea8..9bf3268e2e92 100644
> > > > > > --- a/drivers/gpu/drm/vkms/vkms_crtc.c
> > > > > > +++ b/drivers/gpu/drm/vkms/vkms_crtc.c
> > > > > > @@ -10,6 +10,8 @@ static enum hrtimer_restart vkms_vblank_simulate(struct hrtimer *timer)
> > > > > >                                               vblank_hrtimer);
> > > > > >     struct drm_crtc *crtc = &output->crtc;
> > > > > >     struct vkms_crtc_state *state = to_vkms_crtc_state(crtc->state);
> > > > > > +   unsigned int pipe = drm_crtc_index(crtc);
> > > > > > +   struct drm_vblank_crtc *vblank = &crtc->dev->vblank[pipe];
> > > > > >     u64 ret_overrun;
> > > > > >     bool ret;
> > > > > >
> > > > > > @@ -20,7 +22,7 @@ static enum hrtimer_restart vkms_vblank_simulate(struct hrtimer *timer)
> > > > > >             DRM_ERROR("vkms failure on handling vblank");
> > > > > >
> > > > > >     if (state && output->crc_enabled) {
> > > > > > -           u64 frame = drm_crtc_accurate_vblank_count(crtc);
> > > > > > +           u64 frame = vblank->count;
> > > > > >
> > > > > >             /* update frame_start only if a queued vkms_crc_work_handle()
> > > > > >              * has read the data
> > > > > > --
> > > > > > 2.17.1
> > > > > >
> > > > >
> > > > > --
> > > > > Daniel Vetter
> > > > > Software Engineer, Intel Corporation
> > > > > http://blog.ffwll.ch
> > > > > _______________________________________________
> > > > > dri-devel mailing list
> > > > > [e-mail]
> > > > > https://lists.freedesktop.org/mailman/listinfo/dri-devel
> > > >
> > > > --
> > > > Ville Syrjälä
> > > > Intel
> >
> > --
> > Ville Syrjälä
> > Intel

Rodrigo Siqueira March 10, 2019, 8:35 p.m. UTC | #9

On 03/01, Ville Syrjälä wrote:
> On Fri, Mar 01, 2019 at 03:35:35PM -0300, Shayenne Moura wrote:
> > Em sex, 1 de mar de 2019 às 12:26, Ville Syrjälä
> > <[e-mail]> escreveu:
> > >
> > > On Fri, Mar 01, 2019 at 11:55:11AM -0300, Shayenne Moura wrote:
> > > > Em qui, 28 de fev de 2019 às 11:03, Ville Syrjälä
> > > > <[e-mail]> escreveu:
> > > > >
> > > > > On Thu, Feb 28, 2019 at 11:11:07AM +0100, Daniel Vetter wrote:
> > > > > > On Mon, Feb 25, 2019 at 11:26:06AM -0300, Shayenne Moura wrote:
> > > > > > > vkms_crc_work_handle needs the value of the actual frame to
> > > > > > > schedule the workqueue that calls periodically the vblank
> > > > > > > handler and the destroy state functions. However, the frame
> > > > > > > value returned from vkms_vblank_simulate is updated and
> > > > > > > diminished in vblank_get_timestamp because it is not in a
> > > > > > > vblank interrupt, and return an inaccurate value.
> > > > > > >
> > > > > > > Solve this getting the actual vblank frame directly from the
> > > > > > > vblank->count inside the `struct drm_crtc`, instead of using
> > > > > > > the `drm_accurate_vblank_count` function.
> > > > > > >
> > > > > > > Signed-off-by: Shayenne Moura <[e-mail]>
> > > > > >
> > > > > > Sorry for the delay, I'm a bit swamped right now :-/
> > > > > >
> > > > > > Debug work you're doing here is really impressive! But I have no idea
> > > > > > what's going on. It doesn't look like it's just papering over a bug (like
> > > > > > the in_vblank_irq check we've discussed on irc), but I also have no idea
> > > > > > why it works.
> > > > > >
> > > > > > I'll pull in Ville, he understands this better than me.
> > > > >
> > > > > It's not entirely clear what we're trying to fix. From what I can see
> > > > > the crc work seems to be in no way synchronized with page flips, so
> > > > > I'm not sure how all this is really supposed to work.
> > > > >
> > > >
> > > > Hi, Ville!
> > > >
> > > > Thank you for the review! :)
> > > >
> > > > I do not understand well what crc code is doing, but the issue that I found
> > > > is related to the vblank timestamp and frame count.
> > > >
> > > > When vkms handles the crc_cursor it uses the start frame and end frame
> > > > values to verify if it needs to call the function 'drm_crtc_add_crc_entry()'
> > > > for each frame.
> > > >
> > > > However, when getting the frame count, the code is calling the function
> > > > drm_update_vblank_count(dev, pipe, false) and, because of the 'false',
> > > > subtracting the actual vblank timestamp (consequently, the frame count
> > > > value), causing conflicts.
> > >
> > > The in_vblank_irq behavour looks sane to me. What are these conflicts?
> > >
> > 
> > The entire history was:
> >  - I sent the patch with bugfix for vblank extra frame. The patch changed
> >    our function vkms_get_vblank_timestamp() to look like this:
> > 
> > bool vkms_get_vblank_timestamp(struct drm_device *dev, unsigned int pipe,
> >                    int *max_error, ktime_t *vblank_time,
> >                    bool in_vblank_irq)
> > {
> >     struct vkms_device *vkmsdev = drm_device_to_vkms_device(dev);
> >     struct vkms_output *output = &vkmsdev->output;
> > 
> >     *vblank_time = output->vblank_hrtimer.node.expires;
> > 
> > +   if (!in_vblank_irq)
> > +        *vblank_time -= output->period_ns;
> > 
> >     return true;
> > }
> > 
> >  - This patch solve the issue that I was looking for (extra vblank
> > frames on kms_flip).
> > 
> >  - However, kms_cursor_crc tests, which passed before my patch, started to fail.
> > 
> >  - Debugging them, I found that the problem was inside of function
> > `vkms_vblank_simulate()`
> > when it was handling the crc_enabled (inside  if (state && output->crc_enabled))
> > and inside the function vkms_crc_work_handle() too.
> > 
> >  - Following the steps:
> > 1. Inside vkms_vblank_simulate() we call drm_crtc_accurate_vblank_count()
> > 2. In its turn, drm_crtc_accurate_vblank_count() calls the function
> >    drm_update_vblank_count(dev, pipe, false).  /* This false is default */
> > 3. Finally, the “false” used in drm_update_vblank_count(), will be
> >   passed to vkms_get_vblank_timestamp() and the condition “if
> >   (!in_vblank_irq)” will be executed multiple times (we don’t want it).
> > 
> >  - Inside vkms_crc, the issue is that the returned frame value change for
> > every call of drm_crtc_accurate_vblank_count() because
> > in_vblank_irq == false.

Hi Ville,
 
> OK. So why is it changing? AFAICS it should not change unless the
> timer was moved forward in between the calls.

Yes Ville, you’re right. We have to update it only when the function
vkms_vblank_simulate() is invoked (timer move forward), and FWIU we do
it when we call drm_crtc_handle_vblank(). However, the current
implementation of vkms, has a call to drm_crtc_accurate_vblank_count()
inside the vkms_vblank_simulate() which is a problem because it also
update the vblank value. FWIU, this patch fixes this issue by taking the
count value in the data struct instead of call
drm_crtc_accurate_vblank_count() which will avoid the extra update.

Thanks,
Best Regards
 
> > 
> >  - To solve this, I used the value already calculated on vblank->count,
> > instead of using the helper function that updates the value.
> > 
> > Shayenne
> > 
> > > >
> > > > Does it make sense? I am not sure about this crc code behavior.
> > > >
> > > > Shayenne
> > > >
> > > > > > -Daniel
> > > > > >
> > > > > > > ---
> > > > > > >  drivers/gpu/drm/vkms/vkms_crc.c  | 4 +++-
> > > > > > >  drivers/gpu/drm/vkms/vkms_crtc.c | 4 +++-
> > > > > > >  2 files changed, 6 insertions(+), 2 deletions(-)
> > > > > > >
> > > > > > > diff --git a/drivers/gpu/drm/vkms/vkms_crc.c b/drivers/gpu/drm/vkms/vkms_crc.c
> > > > > > > index d7b409a3c0f8..09a8b00ef1f1 100644
> > > > > > > --- a/drivers/gpu/drm/vkms/vkms_crc.c
> > > > > > > +++ b/drivers/gpu/drm/vkms/vkms_crc.c
> > > > > > > @@ -161,6 +161,8 @@ void vkms_crc_work_handle(struct work_struct *work)
> > > > > > >     struct vkms_output *out = drm_crtc_to_vkms_output(crtc);
> > > > > > >     struct vkms_device *vdev = container_of(out, struct vkms_device,
> > > > > > >                                             output);
> > > > > > > +   unsigned int pipe = drm_crtc_index(crtc);
> > > > > > > +   struct drm_vblank_crtc *vblank = &crtc->dev->vblank[pipe];
> > > > > > >     struct vkms_crc_data *primary_crc = NULL;
> > > > > > >     struct vkms_crc_data *cursor_crc = NULL;
> > > > > > >     struct drm_plane *plane;
> > > > > > > @@ -196,7 +198,7 @@ void vkms_crc_work_handle(struct work_struct *work)
> > > > > > >     if (primary_crc)
> > > > > > >             crc32 = _vkms_get_crc(primary_crc, cursor_crc);
> > > > > > >
> > > > > > > -   frame_end = drm_crtc_accurate_vblank_count(crtc);
> > > > > > > +   frame_end = vblank->count;
> > > > > > >
> > > > > > >     /* queue_work can fail to schedule crc_work; add crc for
> > > > > > >      * missing frames
> > > > > > > diff --git a/drivers/gpu/drm/vkms/vkms_crtc.c b/drivers/gpu/drm/vkms/vkms_crtc.c
> > > > > > > index 8a9aeb0a9ea8..9bf3268e2e92 100644
> > > > > > > --- a/drivers/gpu/drm/vkms/vkms_crtc.c
> > > > > > > +++ b/drivers/gpu/drm/vkms/vkms_crtc.c
> > > > > > > @@ -10,6 +10,8 @@ static enum hrtimer_restart vkms_vblank_simulate(struct hrtimer *timer)
> > > > > > >                                               vblank_hrtimer);
> > > > > > >     struct drm_crtc *crtc = &output->crtc;
> > > > > > >     struct vkms_crtc_state *state = to_vkms_crtc_state(crtc->state);
> > > > > > > +   unsigned int pipe = drm_crtc_index(crtc);
> > > > > > > +   struct drm_vblank_crtc *vblank = &crtc->dev->vblank[pipe];
> > > > > > >     u64 ret_overrun;
> > > > > > >     bool ret;
> > > > > > >
> > > > > > > @@ -20,7 +22,7 @@ static enum hrtimer_restart vkms_vblank_simulate(struct hrtimer *timer)
> > > > > > >             DRM_ERROR("vkms failure on handling vblank");
> > > > > > >
> > > > > > >     if (state && output->crc_enabled) {
> > > > > > > -           u64 frame = drm_crtc_accurate_vblank_count(crtc);
> > > > > > > +           u64 frame = vblank->count;
> > > > > > >
> > > > > > >             /* update frame_start only if a queued vkms_crc_work_handle()
> > > > > > >              * has read the data
> > > > > > > --
> > > > > > > 2.17.1
> > > > > > >
> > > > > >
> > > > > > --
> > > > > > Daniel Vetter
> > > > > > Software Engineer, Intel Corporation
> > > > > > http://blog.ffwll.ch
> > > > > > _______________________________________________
> > > > > > dri-devel mailing list
> > > > > > [e-mail]
> > > > > > https://lists.freedesktop.org/mailman/listinfo/dri-devel
> > > > >
> > > > > --
> > > > > Ville Syrjälä
> > > > > Intel
> > >
> > > --
> > > Ville Syrjälä
> > > Intel
> 
> -- 
> Ville Syrjälä
> Intel

Ville Syrjälä March 11, 2019, 2:27 p.m. UTC | #10

On Sun, Mar 10, 2019 at 05:35:05PM -0300, Rodrigo Siqueira wrote:
> On 03/01, Ville Syrjälä wrote:
> > On Fri, Mar 01, 2019 at 03:35:35PM -0300, Shayenne Moura wrote:
> > > Em sex, 1 de mar de 2019 às 12:26, Ville Syrjälä
> > > <[e-mail]> escreveu:
> > > >
> > > > On Fri, Mar 01, 2019 at 11:55:11AM -0300, Shayenne Moura wrote:
> > > > > Em qui, 28 de fev de 2019 às 11:03, Ville Syrjälä
> > > > > <[e-mail]> escreveu:
> > > > > >
> > > > > > On Thu, Feb 28, 2019 at 11:11:07AM +0100, Daniel Vetter wrote:
> > > > > > > On Mon, Feb 25, 2019 at 11:26:06AM -0300, Shayenne Moura wrote:
> > > > > > > > vkms_crc_work_handle needs the value of the actual frame to
> > > > > > > > schedule the workqueue that calls periodically the vblank
> > > > > > > > handler and the destroy state functions. However, the frame
> > > > > > > > value returned from vkms_vblank_simulate is updated and
> > > > > > > > diminished in vblank_get_timestamp because it is not in a
> > > > > > > > vblank interrupt, and return an inaccurate value.
> > > > > > > >
> > > > > > > > Solve this getting the actual vblank frame directly from the
> > > > > > > > vblank->count inside the `struct drm_crtc`, instead of using
> > > > > > > > the `drm_accurate_vblank_count` function.
> > > > > > > >
> > > > > > > > Signed-off-by: Shayenne Moura <[e-mail]>
> > > > > > >
> > > > > > > Sorry for the delay, I'm a bit swamped right now :-/
> > > > > > >
> > > > > > > Debug work you're doing here is really impressive! But I have no idea
> > > > > > > what's going on. It doesn't look like it's just papering over a bug (like
> > > > > > > the in_vblank_irq check we've discussed on irc), but I also have no idea
> > > > > > > why it works.
> > > > > > >
> > > > > > > I'll pull in Ville, he understands this better than me.
> > > > > >
> > > > > > It's not entirely clear what we're trying to fix. From what I can see
> > > > > > the crc work seems to be in no way synchronized with page flips, so
> > > > > > I'm not sure how all this is really supposed to work.
> > > > > >
> > > > >
> > > > > Hi, Ville!
> > > > >
> > > > > Thank you for the review! :)
> > > > >
> > > > > I do not understand well what crc code is doing, but the issue that I found
> > > > > is related to the vblank timestamp and frame count.
> > > > >
> > > > > When vkms handles the crc_cursor it uses the start frame and end frame
> > > > > values to verify if it needs to call the function 'drm_crtc_add_crc_entry()'
> > > > > for each frame.
> > > > >
> > > > > However, when getting the frame count, the code is calling the function
> > > > > drm_update_vblank_count(dev, pipe, false) and, because of the 'false',
> > > > > subtracting the actual vblank timestamp (consequently, the frame count
> > > > > value), causing conflicts.
> > > >
> > > > The in_vblank_irq behavour looks sane to me. What are these conflicts?
> > > >
> > > 
> > > The entire history was:
> > >  - I sent the patch with bugfix for vblank extra frame. The patch changed
> > >    our function vkms_get_vblank_timestamp() to look like this:
> > > 
> > > bool vkms_get_vblank_timestamp(struct drm_device *dev, unsigned int pipe,
> > >                    int *max_error, ktime_t *vblank_time,
> > >                    bool in_vblank_irq)
> > > {
> > >     struct vkms_device *vkmsdev = drm_device_to_vkms_device(dev);
> > >     struct vkms_output *output = &vkmsdev->output;
> > > 
> > >     *vblank_time = output->vblank_hrtimer.node.expires;
> > > 
> > > +   if (!in_vblank_irq)
> > > +        *vblank_time -= output->period_ns;
> > > 
> > >     return true;
> > > }
> > > 
> > >  - This patch solve the issue that I was looking for (extra vblank
> > > frames on kms_flip).
> > > 
> > >  - However, kms_cursor_crc tests, which passed before my patch, started to fail.
> > > 
> > >  - Debugging them, I found that the problem was inside of function
> > > `vkms_vblank_simulate()`
> > > when it was handling the crc_enabled (inside  if (state && output->crc_enabled))
> > > and inside the function vkms_crc_work_handle() too.
> > > 
> > >  - Following the steps:
> > > 1. Inside vkms_vblank_simulate() we call drm_crtc_accurate_vblank_count()
> > > 2. In its turn, drm_crtc_accurate_vblank_count() calls the function
> > >    drm_update_vblank_count(dev, pipe, false).  /* This false is default */
> > > 3. Finally, the “false” used in drm_update_vblank_count(), will be
> > >   passed to vkms_get_vblank_timestamp() and the condition “if
> > >   (!in_vblank_irq)” will be executed multiple times (we don’t want it).
> > > 
> > >  - Inside vkms_crc, the issue is that the returned frame value change for
> > > every call of drm_crtc_accurate_vblank_count() because
> > > in_vblank_irq == false.
> 
> Hi Ville,
>  
> > OK. So why is it changing? AFAICS it should not change unless the
> > timer was moved forward in between the calls.
> 
> Yes Ville, you’re right. We have to update it only when the function
> vkms_vblank_simulate() is invoked (timer move forward), and FWIU we do
> it when we call drm_crtc_handle_vblank(). However, the current
> implementation of vkms, has a call to drm_crtc_accurate_vblank_count()
> inside the vkms_vblank_simulate() which is a problem because it also
> update the vblank value. FWIU, this patch fixes this issue by taking the
> count value in the data struct instead of call
> drm_crtc_accurate_vblank_count() which will avoid the extra update.

But why does that extra update change the vblank count?

Rodrigo Siqueira March 15, 2019, 11:51 a.m. UTC | #11

On 03/11, Ville Syrjälä wrote:
> On Sun, Mar 10, 2019 at 05:35:05PM -0300, Rodrigo Siqueira wrote:
> > On 03/01, Ville Syrjälä wrote:
> > > On Fri, Mar 01, 2019 at 03:35:35PM -0300, Shayenne Moura wrote:
> > > > Em sex, 1 de mar de 2019 às 12:26, Ville Syrjälä
> > > > <[e-mail]> escreveu:
> > > > >
> > > > > On Fri, Mar 01, 2019 at 11:55:11AM -0300, Shayenne Moura wrote:
> > > > > > Em qui, 28 de fev de 2019 às 11:03, Ville Syrjälä
> > > > > > <[e-mail]> escreveu:
> > > > > > >
> > > > > > > On Thu, Feb 28, 2019 at 11:11:07AM +0100, Daniel Vetter wrote:
> > > > > > > > On Mon, Feb 25, 2019 at 11:26:06AM -0300, Shayenne Moura wrote:
> > > > > > > > > vkms_crc_work_handle needs the value of the actual frame to
> > > > > > > > > schedule the workqueue that calls periodically the vblank
> > > > > > > > > handler and the destroy state functions. However, the frame
> > > > > > > > > value returned from vkms_vblank_simulate is updated and
> > > > > > > > > diminished in vblank_get_timestamp because it is not in a
> > > > > > > > > vblank interrupt, and return an inaccurate value.
> > > > > > > > >
> > > > > > > > > Solve this getting the actual vblank frame directly from the
> > > > > > > > > vblank->count inside the `struct drm_crtc`, instead of using
> > > > > > > > > the `drm_accurate_vblank_count` function.
> > > > > > > > >
> > > > > > > > > Signed-off-by: Shayenne Moura <[e-mail]>
> > > > > > > >
> > > > > > > > Sorry for the delay, I'm a bit swamped right now :-/
> > > > > > > >
> > > > > > > > Debug work you're doing here is really impressive! But I have no idea
> > > > > > > > what's going on. It doesn't look like it's just papering over a bug (like
> > > > > > > > the in_vblank_irq check we've discussed on irc), but I also have no idea
> > > > > > > > why it works.
> > > > > > > >
> > > > > > > > I'll pull in Ville, he understands this better than me.
> > > > > > >
> > > > > > > It's not entirely clear what we're trying to fix. From what I can see
> > > > > > > the crc work seems to be in no way synchronized with page flips, so
> > > > > > > I'm not sure how all this is really supposed to work.
> > > > > > >
> > > > > >
> > > > > > Hi, Ville!
> > > > > >
> > > > > > Thank you for the review! :)
> > > > > >
> > > > > > I do not understand well what crc code is doing, but the issue that I found
> > > > > > is related to the vblank timestamp and frame count.
> > > > > >
> > > > > > When vkms handles the crc_cursor it uses the start frame and end frame
> > > > > > values to verify if it needs to call the function 'drm_crtc_add_crc_entry()'
> > > > > > for each frame.
> > > > > >
> > > > > > However, when getting the frame count, the code is calling the function
> > > > > > drm_update_vblank_count(dev, pipe, false) and, because of the 'false',
> > > > > > subtracting the actual vblank timestamp (consequently, the frame count
> > > > > > value), causing conflicts.
> > > > >
> > > > > The in_vblank_irq behavour looks sane to me. What are these conflicts?
> > > > >
> > > > 
> > > > The entire history was:
> > > >  - I sent the patch with bugfix for vblank extra frame. The patch changed
> > > >    our function vkms_get_vblank_timestamp() to look like this:
> > > > 
> > > > bool vkms_get_vblank_timestamp(struct drm_device *dev, unsigned int pipe,
> > > >                    int *max_error, ktime_t *vblank_time,
> > > >                    bool in_vblank_irq)
> > > > {
> > > >     struct vkms_device *vkmsdev = drm_device_to_vkms_device(dev);
> > > >     struct vkms_output *output = &vkmsdev->output;
> > > > 
> > > >     *vblank_time = output->vblank_hrtimer.node.expires;
> > > > 
> > > > +   if (!in_vblank_irq)
> > > > +        *vblank_time -= output->period_ns;
> > > > 
> > > >     return true;
> > > > }
> > > > 
> > > >  - This patch solve the issue that I was looking for (extra vblank
> > > > frames on kms_flip).
> > > > 
> > > >  - However, kms_cursor_crc tests, which passed before my patch, started to fail.
> > > > 
> > > >  - Debugging them, I found that the problem was inside of function
> > > > `vkms_vblank_simulate()`
> > > > when it was handling the crc_enabled (inside  if (state && output->crc_enabled))
> > > > and inside the function vkms_crc_work_handle() too.
> > > > 
> > > >  - Following the steps:
> > > > 1. Inside vkms_vblank_simulate() we call drm_crtc_accurate_vblank_count()
> > > > 2. In its turn, drm_crtc_accurate_vblank_count() calls the function
> > > >    drm_update_vblank_count(dev, pipe, false).  /* This false is default */
> > > > 3. Finally, the “false” used in drm_update_vblank_count(), will be
> > > >   passed to vkms_get_vblank_timestamp() and the condition “if
> > > >   (!in_vblank_irq)” will be executed multiple times (we don’t want it).
> > > > 
> > > >  - Inside vkms_crc, the issue is that the returned frame value change for
> > > > every call of drm_crtc_accurate_vblank_count() because
> > > > in_vblank_irq == false.
> > 
> > Hi Ville,
> >  
> > > OK. So why is it changing? AFAICS it should not change unless the
> > > timer was moved forward in between the calls.
> > 
> > Yes Ville, you’re right. We have to update it only when the function
> > vkms_vblank_simulate() is invoked (timer move forward), and FWIU we do
> > it when we call drm_crtc_handle_vblank(). However, the current
> > implementation of vkms, has a call to drm_crtc_accurate_vblank_count()
> > inside the vkms_vblank_simulate() which is a problem because it also
> > update the vblank value. FWIU, this patch fixes this issue by taking the
> > count value in the data struct instead of call
> > drm_crtc_accurate_vblank_count() which will avoid the extra update.
> 
> But why does that extra update change the vblank count?

Hi,

I think that I’m failing to explain the issue and the solution in this
patch, sorry for that... and I apologize in advance for the lengthy
email.

In this sense, allow me to elaborate the whole history in ‘chronological
sections’:

1. About the ‘fake’ Vblank inside VKMS

Since VKMS is a virtual driver, we do not have real Vblank, and we
simulate it by using hrtimers. I registered the function
vkms_vblank_simulate() as a callback inside hrtimer; in this function,
we do some stuff that can be summarized in the sequence below:

I) drm_crtc_handle_vblank()
II) Check if crc is enabled or not
III) Schedule the next vblank with hrtimer_forward_now()

2. Override the default behaviour for get_vblank_timestamp()

As I told before, everytime that vkms_vblank_simulate() is invoked the
function drm_crtc_handle_vblank() will be requested. For us, the
important thing about drm_crtc_handle_vblank() is the sequence:

 a) drm_crtc_handle_vblank()
 b) drm_handle_vblank()
 c) drm_update_vblank_count()
 d) drm_get_last_vbltimestamp()
 e) get_vblank_timestamp()

Since VKMS is a virtual driver, we cannot rely on the default
implementation of get_vblank_timestamp(). In this context, we
implemented our wrapper named vkms_get_vblank_timestamp(), and we have
to return the expires time from hrtimer to the userspace. In my first
implementation of this function, I had something like:

bool vkms_get_vblank_timestamp(struct drm_device *dev, unsigned int pipe,
                               int *max_error, ktime_t *vblank_time,
                               bool in_vblank_irq)
{
[..]
        *vblank_time = output->vblank_hrtimer.node.expires;
        return true;
}

Around 80% of the kms_flip tests were passing with this code. However,
we had some tests that break due to an extra vblank.

3. The extra vblank bug

Shayenne and Daniel figured out that the extra vblank came from the
function drm_crtc_arm_vblank_event() invoked inside the
vkms_crtc_atomic_flush(). If we take a look inside
drm_crtc_arm_vblank_event(), we can find:

void drm_crtc_arm_vblank_event([..])
{
[..]
       e->sequence = drm_crtc_accurate_vblank_count(crtc) + 1;
[..]
}

This function increment the sequence by one (there is a detailed
explanation about it in the documentation of this function).

4. The bug fix

After inspecting the code, we identified the following sequence when the
function drm_crtc_arm_vblank_event() is invoked:

 a) drm_crtc_arm_vblank_event()
 b) drm_crtc_accurate_vblank_count()
 c) drm_update_vblank_count(dev, pipe, false)

Noticed that drm_update_vblank_count() is invoked again, but now with
‘false’ in the in_vblank_irq because it does not have to report anything
for userspace or something like that. With this in mind, remember that
drm_update_vblank_count() will call get_vblank_timestamp(); with my
first implementation of vkms_get_vblank_timestamp() (see Section 2 for
recap) we will update the vblank_time with the wrong information. After
understanding all of these details and the meaning of the parameter
in_vblank_irq, the following fix was added:

bool vkms_get_vblank_timestamp([..]) {
[..]
        if (!in_vblank_irq)
                *vblank_time -= output->period_ns;
[..]
}

With this validation, we can solve the problem of the extra Vblank added
by drm_crtc_arm_vblank_event(). Afterward, all the kms_flip test started
to pass.

5. The new bug on CRC operation

As a side effect of the above change, the CRC tests start to failing.
The question was, why we break the CRC test with that fix?

We start hunting the problem, and the first thing to look is the
function vkms_vblank_simulate(). Inside this function, we have this
code:

vkms_vblank_simulate([..]) {
[..]
        if (state && output->crc_enabled) {
                u64 frame = drm_crtc_accurate_vblank_count(crtc);
                [..]
        }

The output->crc_enabled is a module parameter that enables CRC
computation which is required for CRC tests, but not for kms_flip.
Additionally, notice that we save the value of the current frame because
it is necessary to use it on vkms_crc_work_handle(). The only thing that
we need to know about vkms_crc_work_handle() is the fact we call
drm_crtc_add_crc_entry() which requires the frame number, and we also
use it to check if the frame was updated or not.

As I said in Section 2, drm_crtc_accurate_vblank_count() calls
drm_update_vblank_count() with false parameter in in_vblank_irq. Due to
the last change made at vkms_get_vblank_timestamp(), we broke the CRC
code because now we invoke get_vblank_timestamp() multiple times. The
consequence of this change is the excessive decrement of the timestamp
since the following condition execute multiple time:

bool vkms_get_vblank_timestamp([..]) {
        if (!in_vblank_irq)
                *vblank_time -= output->period_ns;

6. The bug fix (this patch)

Since we only want the frame number, as I described in Section 5, the
fix is quite simple: avoid call drm_crtc_accurate_vblank_count() and
just get the frame value from the data structure. In this patch,
Shayenne removed the function drm_crtc_accurate_vblank_count() which
avoid the extra decrement in the vkms_get_vblank_timestamp(). With this
patch, everything started to work well.

So... In a few words, it is a VKMS problem, not a vblank issue.

I’m not sure if the solution here is the best one, but I believe that
the idea behind it is correct.

Best Regards

Ville Syrjälä March 15, 2019, 1:48 p.m. UTC | #12

On Fri, Mar 15, 2019 at 08:51:57AM -0300, Rodrigo Siqueira wrote:
> On 03/11, Ville Syrjälä wrote:
> > On Sun, Mar 10, 2019 at 05:35:05PM -0300, Rodrigo Siqueira wrote:
> > > On 03/01, Ville Syrjälä wrote:
> > > > On Fri, Mar 01, 2019 at 03:35:35PM -0300, Shayenne Moura wrote:
> > > > > Em sex, 1 de mar de 2019 às 12:26, Ville Syrjälä
> > > > > <[e-mail]> escreveu:
> > > > > >
> > > > > > On Fri, Mar 01, 2019 at 11:55:11AM -0300, Shayenne Moura wrote:
> > > > > > > Em qui, 28 de fev de 2019 às 11:03, Ville Syrjälä
> > > > > > > <[e-mail]> escreveu:
> > > > > > > >
> > > > > > > > On Thu, Feb 28, 2019 at 11:11:07AM +0100, Daniel Vetter wrote:
> > > > > > > > > On Mon, Feb 25, 2019 at 11:26:06AM -0300, Shayenne Moura wrote:
> > > > > > > > > > vkms_crc_work_handle needs the value of the actual frame to
> > > > > > > > > > schedule the workqueue that calls periodically the vblank
> > > > > > > > > > handler and the destroy state functions. However, the frame
> > > > > > > > > > value returned from vkms_vblank_simulate is updated and
> > > > > > > > > > diminished in vblank_get_timestamp because it is not in a
> > > > > > > > > > vblank interrupt, and return an inaccurate value.
> > > > > > > > > >
> > > > > > > > > > Solve this getting the actual vblank frame directly from the
> > > > > > > > > > vblank->count inside the `struct drm_crtc`, instead of using
> > > > > > > > > > the `drm_accurate_vblank_count` function.
> > > > > > > > > >
> > > > > > > > > > Signed-off-by: Shayenne Moura <[e-mail]>
> > > > > > > > >
> > > > > > > > > Sorry for the delay, I'm a bit swamped right now :-/
> > > > > > > > >
> > > > > > > > > Debug work you're doing here is really impressive! But I have no idea
> > > > > > > > > what's going on. It doesn't look like it's just papering over a bug (like
> > > > > > > > > the in_vblank_irq check we've discussed on irc), but I also have no idea
> > > > > > > > > why it works.
> > > > > > > > >
> > > > > > > > > I'll pull in Ville, he understands this better than me.
> > > > > > > >
> > > > > > > > It's not entirely clear what we're trying to fix. From what I can see
> > > > > > > > the crc work seems to be in no way synchronized with page flips, so
> > > > > > > > I'm not sure how all this is really supposed to work.
> > > > > > > >
> > > > > > >
> > > > > > > Hi, Ville!
> > > > > > >
> > > > > > > Thank you for the review! :)
> > > > > > >
> > > > > > > I do not understand well what crc code is doing, but the issue that I found
> > > > > > > is related to the vblank timestamp and frame count.
> > > > > > >
> > > > > > > When vkms handles the crc_cursor it uses the start frame and end frame
> > > > > > > values to verify if it needs to call the function 'drm_crtc_add_crc_entry()'
> > > > > > > for each frame.
> > > > > > >
> > > > > > > However, when getting the frame count, the code is calling the function
> > > > > > > drm_update_vblank_count(dev, pipe, false) and, because of the 'false',
> > > > > > > subtracting the actual vblank timestamp (consequently, the frame count
> > > > > > > value), causing conflicts.
> > > > > >
> > > > > > The in_vblank_irq behavour looks sane to me. What are these conflicts?
> > > > > >
> > > > > 
> > > > > The entire history was:
> > > > >  - I sent the patch with bugfix for vblank extra frame. The patch changed
> > > > >    our function vkms_get_vblank_timestamp() to look like this:
> > > > > 
> > > > > bool vkms_get_vblank_timestamp(struct drm_device *dev, unsigned int pipe,
> > > > >                    int *max_error, ktime_t *vblank_time,
> > > > >                    bool in_vblank_irq)
> > > > > {
> > > > >     struct vkms_device *vkmsdev = drm_device_to_vkms_device(dev);
> > > > >     struct vkms_output *output = &vkmsdev->output;
> > > > > 
> > > > >     *vblank_time = output->vblank_hrtimer.node.expires;
> > > > > 
> > > > > +   if (!in_vblank_irq)
> > > > > +        *vblank_time -= output->period_ns;
> > > > > 
> > > > >     return true;
> > > > > }
> > > > > 
> > > > >  - This patch solve the issue that I was looking for (extra vblank
> > > > > frames on kms_flip).
> > > > > 
> > > > >  - However, kms_cursor_crc tests, which passed before my patch, started to fail.
> > > > > 
> > > > >  - Debugging them, I found that the problem was inside of function
> > > > > `vkms_vblank_simulate()`
> > > > > when it was handling the crc_enabled (inside  if (state && output->crc_enabled))
> > > > > and inside the function vkms_crc_work_handle() too.
> > > > > 
> > > > >  - Following the steps:
> > > > > 1. Inside vkms_vblank_simulate() we call drm_crtc_accurate_vblank_count()
> > > > > 2. In its turn, drm_crtc_accurate_vblank_count() calls the function
> > > > >    drm_update_vblank_count(dev, pipe, false).  /* This false is default */
> > > > > 3. Finally, the “false” used in drm_update_vblank_count(), will be
> > > > >   passed to vkms_get_vblank_timestamp() and the condition “if
> > > > >   (!in_vblank_irq)” will be executed multiple times (we don’t want it).
> > > > > 
> > > > >  - Inside vkms_crc, the issue is that the returned frame value change for
> > > > > every call of drm_crtc_accurate_vblank_count() because
> > > > > in_vblank_irq == false.
> > > 
> > > Hi Ville,
> > >  
> > > > OK. So why is it changing? AFAICS it should not change unless the
> > > > timer was moved forward in between the calls.
> > > 
> > > Yes Ville, you’re right. We have to update it only when the function
> > > vkms_vblank_simulate() is invoked (timer move forward), and FWIU we do
> > > it when we call drm_crtc_handle_vblank(). However, the current
> > > implementation of vkms, has a call to drm_crtc_accurate_vblank_count()
> > > inside the vkms_vblank_simulate() which is a problem because it also
> > > update the vblank value. FWIU, this patch fixes this issue by taking the
> > > count value in the data struct instead of call
> > > drm_crtc_accurate_vblank_count() which will avoid the extra update.
> > 
> > But why does that extra update change the vblank count?
> 
> Hi,
> 
> I think that I’m failing to explain the issue and the solution in this
> patch, sorry for that... and I apologize in advance for the lengthy
> email.
> 
> In this sense, allow me to elaborate the whole history in ‘chronological
> sections’:
> 
> 1. About the ‘fake’ Vblank inside VKMS
> 
> Since VKMS is a virtual driver, we do not have real Vblank, and we
> simulate it by using hrtimers. I registered the function
> vkms_vblank_simulate() as a callback inside hrtimer; in this function,
> we do some stuff that can be summarized in the sequence below:
> 
> I) drm_crtc_handle_vblank()
> II) Check if crc is enabled or not
> III) Schedule the next vblank with hrtimer_forward_now()
> 
> 2. Override the default behaviour for get_vblank_timestamp()
> 
> As I told before, everytime that vkms_vblank_simulate() is invoked the
> function drm_crtc_handle_vblank() will be requested. For us, the
> important thing about drm_crtc_handle_vblank() is the sequence:
> 
>  a) drm_crtc_handle_vblank()
>  b) drm_handle_vblank()
>  c) drm_update_vblank_count()
>  d) drm_get_last_vbltimestamp()
>  e) get_vblank_timestamp()
> 
> Since VKMS is a virtual driver, we cannot rely on the default
> implementation of get_vblank_timestamp(). In this context, we
> implemented our wrapper named vkms_get_vblank_timestamp(), and we have
> to return the expires time from hrtimer to the userspace. In my first
> implementation of this function, I had something like:
> 
> bool vkms_get_vblank_timestamp(struct drm_device *dev, unsigned int pipe,
>                                int *max_error, ktime_t *vblank_time,
>                                bool in_vblank_irq)
> {
> [..]
>         *vblank_time = output->vblank_hrtimer.node.expires;
>         return true;
> }
> 
> Around 80% of the kms_flip tests were passing with this code. However,
> we had some tests that break due to an extra vblank.
> 
> 3. The extra vblank bug
> 
> Shayenne and Daniel figured out that the extra vblank came from the
> function drm_crtc_arm_vblank_event() invoked inside the
> vkms_crtc_atomic_flush(). If we take a look inside
> drm_crtc_arm_vblank_event(), we can find:
> 
> void drm_crtc_arm_vblank_event([..])
> {
> [..]
>        e->sequence = drm_crtc_accurate_vblank_count(crtc) + 1;
> [..]
> }
> 
> This function increment the sequence by one (there is a detailed
> explanation about it in the documentation of this function).
> 
> 4. The bug fix
> 
> After inspecting the code, we identified the following sequence when the
> function drm_crtc_arm_vblank_event() is invoked:
> 
>  a) drm_crtc_arm_vblank_event()
>  b) drm_crtc_accurate_vblank_count()
>  c) drm_update_vblank_count(dev, pipe, false)
> 
> Noticed that drm_update_vblank_count() is invoked again, but now with
> ‘false’ in the in_vblank_irq because it does not have to report anything
> for userspace or something like that. With this in mind, remember that
> drm_update_vblank_count() will call get_vblank_timestamp(); with my
> first implementation of vkms_get_vblank_timestamp() (see Section 2 for
> recap) we will update the vblank_time with the wrong information. After
> understanding all of these details and the meaning of the parameter
> in_vblank_irq, the following fix was added:
> 
> bool vkms_get_vblank_timestamp([..]) {
> [..]
>         if (!in_vblank_irq)
>                 *vblank_time -= output->period_ns;
> [..]
> }
> 
> With this validation, we can solve the problem of the extra Vblank added
> by drm_crtc_arm_vblank_event(). Afterward, all the kms_flip test started
> to pass.
> 
> 5. The new bug on CRC operation
> 
> As a side effect of the above change, the CRC tests start to failing.
> The question was, why we break the CRC test with that fix?
> 
> We start hunting the problem, and the first thing to look is the
> function vkms_vblank_simulate(). Inside this function, we have this
> code:
> 
> vkms_vblank_simulate([..]) {
> [..]
>         if (state && output->crc_enabled) {
>                 u64 frame = drm_crtc_accurate_vblank_count(crtc);
>                 [..]
>         }
> 
> The output->crc_enabled is a module parameter that enables CRC
> computation which is required for CRC tests, but not for kms_flip.
> Additionally, notice that we save the value of the current frame because
> it is necessary to use it on vkms_crc_work_handle(). The only thing that
> we need to know about vkms_crc_work_handle() is the fact we call
> drm_crtc_add_crc_entry() which requires the frame number, and we also
> use it to check if the frame was updated or not.
> 
> As I said in Section 2, drm_crtc_accurate_vblank_count() calls
> drm_update_vblank_count() with false parameter in in_vblank_irq. Due to
> the last change made at vkms_get_vblank_timestamp(), we broke the CRC
> code because now we invoke get_vblank_timestamp() multiple times. The
> consequence of this change is the excessive decrement of the timestamp
> since the following condition execute multiple time:
> 
> bool vkms_get_vblank_timestamp([..]) {
>         if (!in_vblank_irq)
>                 *vblank_time -= output->period_ns;

The full code is
*vblank_time = output->vblank_hrtimer.node.expires;
if (!in_vblank_irq)
	*vblank_time -= output->period_ns;

So no matter how many times you call it you should always get the same
answer (unless the timer was moved forwared in between the calls).

> 
> 6. The bug fix (this patch)
> 
> Since we only want the frame number, as I described in Section 5, the
> fix is quite simple: avoid call drm_crtc_accurate_vblank_count() and
> just get the frame value from the data structure. In this patch,
> Shayenne removed the function drm_crtc_accurate_vblank_count() which
> avoid the extra decrement in the vkms_get_vblank_timestamp(). With this
> patch, everything started to work well.
> 
> So... In a few words, it is a VKMS problem, not a vblank issue.
> 
> I’m not sure if the solution here is the best one, but I believe that
> the idea behind it is correct.
> 
> Best Regards
> 
> -- 
> Rodrigo Siqueira
> https://siqueira.tech
> Graduate Student
> Department of Computer Science
> University of São Paulo

Rodrigo Siqueira March 18, 2019, 7:36 p.m. UTC | #13

On 03/15, Ville Syrjälä wrote:
> On Fri, Mar 15, 2019 at 08:51:57AM -0300, Rodrigo Siqueira wrote:
> > On 03/11, Ville Syrjälä wrote:
> > > On Sun, Mar 10, 2019 at 05:35:05PM -0300, Rodrigo Siqueira wrote:
> > > > On 03/01, Ville Syrjälä wrote:
> > > > > On Fri, Mar 01, 2019 at 03:35:35PM -0300, Shayenne Moura wrote:
> > > > > > Em sex, 1 de mar de 2019 às 12:26, Ville Syrjälä
> > > > > > <[e-mail]> escreveu:
> > > > > > >
> > > > > > > On Fri, Mar 01, 2019 at 11:55:11AM -0300, Shayenne Moura wrote:
> > > > > > > > Em qui, 28 de fev de 2019 às 11:03, Ville Syrjälä
> > > > > > > > <[e-mail]> escreveu:
> > > > > > > > >
> > > > > > > > > On Thu, Feb 28, 2019 at 11:11:07AM +0100, Daniel Vetter wrote:
> > > > > > > > > > On Mon, Feb 25, 2019 at 11:26:06AM -0300, Shayenne Moura wrote:
> > > > > > > > > > > vkms_crc_work_handle needs the value of the actual frame to
> > > > > > > > > > > schedule the workqueue that calls periodically the vblank
> > > > > > > > > > > handler and the destroy state functions. However, the frame
> > > > > > > > > > > value returned from vkms_vblank_simulate is updated and
> > > > > > > > > > > diminished in vblank_get_timestamp because it is not in a
> > > > > > > > > > > vblank interrupt, and return an inaccurate value.
> > > > > > > > > > >
> > > > > > > > > > > Solve this getting the actual vblank frame directly from the
> > > > > > > > > > > vblank->count inside the `struct drm_crtc`, instead of using
> > > > > > > > > > > the `drm_accurate_vblank_count` function.
> > > > > > > > > > >
> > > > > > > > > > > Signed-off-by: Shayenne Moura <[e-mail]>
> > > > > > > > > >
> > > > > > > > > > Sorry for the delay, I'm a bit swamped right now :-/
> > > > > > > > > >
> > > > > > > > > > Debug work you're doing here is really impressive! But I have no idea
> > > > > > > > > > what's going on. It doesn't look like it's just papering over a bug (like
> > > > > > > > > > the in_vblank_irq check we've discussed on irc), but I also have no idea
> > > > > > > > > > why it works.
> > > > > > > > > >
> > > > > > > > > > I'll pull in Ville, he understands this better than me.
> > > > > > > > >
> > > > > > > > > It's not entirely clear what we're trying to fix. From what I can see
> > > > > > > > > the crc work seems to be in no way synchronized with page flips, so
> > > > > > > > > I'm not sure how all this is really supposed to work.
> > > > > > > > >
> > > > > > > >
> > > > > > > > Hi, Ville!
> > > > > > > >
> > > > > > > > Thank you for the review! :)
> > > > > > > >
> > > > > > > > I do not understand well what crc code is doing, but the issue that I found
> > > > > > > > is related to the vblank timestamp and frame count.
> > > > > > > >
> > > > > > > > When vkms handles the crc_cursor it uses the start frame and end frame
> > > > > > > > values to verify if it needs to call the function 'drm_crtc_add_crc_entry()'
> > > > > > > > for each frame.
> > > > > > > >
> > > > > > > > However, when getting the frame count, the code is calling the function
> > > > > > > > drm_update_vblank_count(dev, pipe, false) and, because of the 'false',
> > > > > > > > subtracting the actual vblank timestamp (consequently, the frame count
> > > > > > > > value), causing conflicts.
> > > > > > >
> > > > > > > The in_vblank_irq behavour looks sane to me. What are these conflicts?
> > > > > > >
> > > > > > 
> > > > > > The entire history was:
> > > > > >  - I sent the patch with bugfix for vblank extra frame. The patch changed
> > > > > >    our function vkms_get_vblank_timestamp() to look like this:
> > > > > > 
> > > > > > bool vkms_get_vblank_timestamp(struct drm_device *dev, unsigned int pipe,
> > > > > >                    int *max_error, ktime_t *vblank_time,
> > > > > >                    bool in_vblank_irq)
> > > > > > {
> > > > > >     struct vkms_device *vkmsdev = drm_device_to_vkms_device(dev);
> > > > > >     struct vkms_output *output = &vkmsdev->output;
> > > > > > 
> > > > > >     *vblank_time = output->vblank_hrtimer.node.expires;
> > > > > > 
> > > > > > +   if (!in_vblank_irq)
> > > > > > +        *vblank_time -= output->period_ns;
> > > > > > 
> > > > > >     return true;
> > > > > > }
> > > > > > 
> > > > > >  - This patch solve the issue that I was looking for (extra vblank
> > > > > > frames on kms_flip).
> > > > > > 
> > > > > >  - However, kms_cursor_crc tests, which passed before my patch, started to fail.
> > > > > > 
> > > > > >  - Debugging them, I found that the problem was inside of function
> > > > > > `vkms_vblank_simulate()`
> > > > > > when it was handling the crc_enabled (inside  if (state && output->crc_enabled))
> > > > > > and inside the function vkms_crc_work_handle() too.
> > > > > > 
> > > > > >  - Following the steps:
> > > > > > 1. Inside vkms_vblank_simulate() we call drm_crtc_accurate_vblank_count()
> > > > > > 2. In its turn, drm_crtc_accurate_vblank_count() calls the function
> > > > > >    drm_update_vblank_count(dev, pipe, false).  /* This false is default */
> > > > > > 3. Finally, the “false” used in drm_update_vblank_count(), will be
> > > > > >   passed to vkms_get_vblank_timestamp() and the condition “if
> > > > > >   (!in_vblank_irq)” will be executed multiple times (we don’t want it).
> > > > > > 
> > > > > >  - Inside vkms_crc, the issue is that the returned frame value change for
> > > > > > every call of drm_crtc_accurate_vblank_count() because
> > > > > > in_vblank_irq == false.
> > > > 
> > > > Hi Ville,
> > > >  
> > > > > OK. So why is it changing? AFAICS it should not change unless the
> > > > > timer was moved forward in between the calls.
> > > > 
> > > > Yes Ville, you’re right. We have to update it only when the function
> > > > vkms_vblank_simulate() is invoked (timer move forward), and FWIU we do
> > > > it when we call drm_crtc_handle_vblank(). However, the current
> > > > implementation of vkms, has a call to drm_crtc_accurate_vblank_count()
> > > > inside the vkms_vblank_simulate() which is a problem because it also
> > > > update the vblank value. FWIU, this patch fixes this issue by taking the
> > > > count value in the data struct instead of call
> > > > drm_crtc_accurate_vblank_count() which will avoid the extra update.
> > > 
> > > But why does that extra update change the vblank count?
> > 
> > Hi,
> > 
> > I think that I’m failing to explain the issue and the solution in this
> > patch, sorry for that... and I apologize in advance for the lengthy
> > email.
> > 
> > In this sense, allow me to elaborate the whole history in ‘chronological
> > sections’:
> > 
> > 1. About the ‘fake’ Vblank inside VKMS
> > 
> > Since VKMS is a virtual driver, we do not have real Vblank, and we
> > simulate it by using hrtimers. I registered the function
> > vkms_vblank_simulate() as a callback inside hrtimer; in this function,
> > we do some stuff that can be summarized in the sequence below:
> > 
> > I) drm_crtc_handle_vblank()
> > II) Check if crc is enabled or not
> > III) Schedule the next vblank with hrtimer_forward_now()
> > 
> > 2. Override the default behaviour for get_vblank_timestamp()
> > 
> > As I told before, everytime that vkms_vblank_simulate() is invoked the
> > function drm_crtc_handle_vblank() will be requested. For us, the
> > important thing about drm_crtc_handle_vblank() is the sequence:
> > 
> >  a) drm_crtc_handle_vblank()
> >  b) drm_handle_vblank()
> >  c) drm_update_vblank_count()
> >  d) drm_get_last_vbltimestamp()
> >  e) get_vblank_timestamp()
> > 
> > Since VKMS is a virtual driver, we cannot rely on the default
> > implementation of get_vblank_timestamp(). In this context, we
> > implemented our wrapper named vkms_get_vblank_timestamp(), and we have
> > to return the expires time from hrtimer to the userspace. In my first
> > implementation of this function, I had something like:
> > 
> > bool vkms_get_vblank_timestamp(struct drm_device *dev, unsigned int pipe,
> >                                int *max_error, ktime_t *vblank_time,
> >                                bool in_vblank_irq)
> > {
> > [..]
> >         *vblank_time = output->vblank_hrtimer.node.expires;
> >         return true;
> > }
> > 
> > Around 80% of the kms_flip tests were passing with this code. However,
> > we had some tests that break due to an extra vblank.
> > 
> > 3. The extra vblank bug
> > 
> > Shayenne and Daniel figured out that the extra vblank came from the
> > function drm_crtc_arm_vblank_event() invoked inside the
> > vkms_crtc_atomic_flush(). If we take a look inside
> > drm_crtc_arm_vblank_event(), we can find:
> > 
> > void drm_crtc_arm_vblank_event([..])
> > {
> > [..]
> >        e->sequence = drm_crtc_accurate_vblank_count(crtc) + 1;
> > [..]
> > }
> > 
> > This function increment the sequence by one (there is a detailed
> > explanation about it in the documentation of this function).
> > 
> > 4. The bug fix
> > 
> > After inspecting the code, we identified the following sequence when the
> > function drm_crtc_arm_vblank_event() is invoked:
> > 
> >  a) drm_crtc_arm_vblank_event()
> >  b) drm_crtc_accurate_vblank_count()
> >  c) drm_update_vblank_count(dev, pipe, false)
> > 
> > Noticed that drm_update_vblank_count() is invoked again, but now with
> > ‘false’ in the in_vblank_irq because it does not have to report anything
> > for userspace or something like that. With this in mind, remember that
> > drm_update_vblank_count() will call get_vblank_timestamp(); with my
> > first implementation of vkms_get_vblank_timestamp() (see Section 2 for
> > recap) we will update the vblank_time with the wrong information. After
> > understanding all of these details and the meaning of the parameter
> > in_vblank_irq, the following fix was added:
> > 
> > bool vkms_get_vblank_timestamp([..]) {
> > [..]
> >         if (!in_vblank_irq)
> >                 *vblank_time -= output->period_ns;
> > [..]
> > }
> > 
> > With this validation, we can solve the problem of the extra Vblank added
> > by drm_crtc_arm_vblank_event(). Afterward, all the kms_flip test started
> > to pass.
> > 
> > 5. The new bug on CRC operation
> > 
> > As a side effect of the above change, the CRC tests start to failing.
> > The question was, why we break the CRC test with that fix?
> > 
> > We start hunting the problem, and the first thing to look is the
> > function vkms_vblank_simulate(). Inside this function, we have this
> > code:
> > 
> > vkms_vblank_simulate([..]) {
> > [..]
> >         if (state && output->crc_enabled) {
> >                 u64 frame = drm_crtc_accurate_vblank_count(crtc);
> >                 [..]
> >         }
> > 
> > The output->crc_enabled is a module parameter that enables CRC
> > computation which is required for CRC tests, but not for kms_flip.
> > Additionally, notice that we save the value of the current frame because
> > it is necessary to use it on vkms_crc_work_handle(). The only thing that
> > we need to know about vkms_crc_work_handle() is the fact we call
> > drm_crtc_add_crc_entry() which requires the frame number, and we also
> > use it to check if the frame was updated or not.
> > 
> > As I said in Section 2, drm_crtc_accurate_vblank_count() calls
> > drm_update_vblank_count() with false parameter in in_vblank_irq. Due to
> > the last change made at vkms_get_vblank_timestamp(), we broke the CRC
> > code because now we invoke get_vblank_timestamp() multiple times. The
> > consequence of this change is the excessive decrement of the timestamp
> > since the following condition execute multiple time:
> > 
> > bool vkms_get_vblank_timestamp([..]) {
> >         if (!in_vblank_irq)
> >                 *vblank_time -= output->period_ns;
> 
> The full code is
> *vblank_time = output->vblank_hrtimer.node.expires;
> if (!in_vblank_irq)
> 	*vblank_time -= output->period_ns;
> 
> So no matter how many times you call it you should always get the same
> answer (unless the timer was moved forwared in between the calls).

Touché! :)

You're right! Thanks for your patience, I finally understood the problem
and now I will dig into it.

Thanks

> > 
> > 6. The bug fix (this patch)
> > 
> > Since we only want the frame number, as I described in Section 5, the
> > fix is quite simple: avoid call drm_crtc_accurate_vblank_count() and
> > just get the frame value from the data structure. In this patch,
> > Shayenne removed the function drm_crtc_accurate_vblank_count() which
> > avoid the extra decrement in the vkms_get_vblank_timestamp(). With this
> > patch, everything started to work well.
> > 
> > So... In a few words, it is a VKMS problem, not a vblank issue.
> > 
> > I’m not sure if the solution here is the best one, but I believe that
> > the idea behind it is correct.
> > 
> > Best Regards
> > 
> > -- 
> > Rodrigo Siqueira
> > https://siqueira.tech
> > Graduate Student
> > Department of Computer Science
> > University of São Paulo
> 
> 
> 
> -- 
> Ville Syrjälä
> Intel

Patch

diff --git a/drivers/gpu/drm/vkms/vkms_crc.c b/drivers/gpu/drm/vkms/vkms_crc.c
index d7b409a3c0f8..09a8b00ef1f1 100644
--- a/drivers/gpu/drm/vkms/vkms_crc.c
+++ b/drivers/gpu/drm/vkms/vkms_crc.c
@@ -161,6 +161,8 @@  void vkms_crc_work_handle(struct work_struct *work)
 	struct vkms_output *out = drm_crtc_to_vkms_output(crtc);
 	struct vkms_device *vdev = container_of(out, struct vkms_device,
 						output);
+	unsigned int pipe = drm_crtc_index(crtc);
+	struct drm_vblank_crtc *vblank = &crtc->dev->vblank[pipe];
 	struct vkms_crc_data *primary_crc = NULL;
 	struct vkms_crc_data *cursor_crc = NULL;
 	struct drm_plane *plane;
@@ -196,7 +198,7 @@  void vkms_crc_work_handle(struct work_struct *work)
 	if (primary_crc)
 		crc32 = _vkms_get_crc(primary_crc, cursor_crc);
 
-	frame_end = drm_crtc_accurate_vblank_count(crtc);
+	frame_end = vblank->count;
 
 	/* queue_work can fail to schedule crc_work; add crc for
 	 * missing frames
diff --git a/drivers/gpu/drm/vkms/vkms_crtc.c b/drivers/gpu/drm/vkms/vkms_crtc.c
index 8a9aeb0a9ea8..9bf3268e2e92 100644
--- a/drivers/gpu/drm/vkms/vkms_crtc.c
+++ b/drivers/gpu/drm/vkms/vkms_crtc.c
@@ -10,6 +10,8 @@  static enum hrtimer_restart vkms_vblank_simulate(struct hrtimer *timer)
 						  vblank_hrtimer);
 	struct drm_crtc *crtc = &output->crtc;
 	struct vkms_crtc_state *state = to_vkms_crtc_state(crtc->state);
+	unsigned int pipe = drm_crtc_index(crtc);
+	struct drm_vblank_crtc *vblank = &crtc->dev->vblank[pipe];
 	u64 ret_overrun;
 	bool ret;
 
@@ -20,7 +22,7 @@  static enum hrtimer_restart vkms_vblank_simulate(struct hrtimer *timer)
 		DRM_ERROR("vkms failure on handling vblank");
 
 	if (state && output->crc_enabled) {
-		u64 frame = drm_crtc_accurate_vblank_count(crtc);
+		u64 frame = vblank->count;
 
 		/* update frame_start only if a queued vkms_crc_work_handle()
 		 * has read the data