@@ -86,8 +86,7 @@ config DRM_SIL_SII8620
depends on OF
select DRM_KMS_HELPER
imply EXTCON
- select INPUT
- select RC_CORE
+ imply RC_CORE
help
Silicon Image SII8620 HDMI/MHL bridge chip driver.
@@ -66,7 +66,9 @@ enum sii8620_mt_state {
struct sii8620 {
struct drm_bridge bridge;
struct device *dev;
+#if IS_ENABLED(CONFIG_RC_CORE)
struct rc_dev *rc_dev;
+#endif
struct clk *clk_xtal;
struct gpio_desc *gpio_reset;
struct gpio_desc *gpio_int;
@@ -1756,6 +1758,7 @@ static void sii8620_send_features(struct sii8620 *ctx)
sii8620_write_buf(ctx, REG_MDT_XMIT_WRITE_PORT, buf, ARRAY_SIZE(buf));
}
+#if IS_ENABLED(CONFIG_RC_CORE)
static bool sii8620_rcp_consume(struct sii8620 *ctx, u8 scancode)
{
bool pressed = !(scancode & MHL_RCP_KEY_RELEASED_MASK);
@@ -1774,6 +1777,12 @@ static bool sii8620_rcp_consume(struct sii8620 *ctx, u8 scancode)
return true;
}
+#else
+static bool sii8620_rcp_consume(struct sii8620 *ctx, u8 scancode)
+{
+ return false;
+}
+#endif
static void sii8620_msc_mr_set_int(struct sii8620 *ctx)
{
@@ -2097,6 +2106,7 @@ static void sii8620_cable_in(struct sii8620 *ctx)
enable_irq(to_i2c_client(ctx->dev)->irq);
}
+#if IS_ENABLED(CONFIG_RC_CORE)
static void sii8620_init_rcp_input_dev(struct sii8620 *ctx)
{
struct rc_dev *rc_dev;
@@ -2126,6 +2136,11 @@ static void sii8620_init_rcp_input_dev(struct sii8620 *ctx)
}
ctx->rc_dev = rc_dev;
}
+#else
+static void sii8620_init_rcp_input_dev(struct sii8620 *ctx)
+{
+}
+#endif
static void sii8620_cable_out(struct sii8620 *ctx)
{
@@ -2212,12 +2227,18 @@ static int sii8620_attach(struct drm_bridge *bridge)
return sii8620_clear_error(ctx);
}
+#if IS_ENABLED(CONFIG_RC_CORE)
static void sii8620_detach(struct drm_bridge *bridge)
{
struct sii8620 *ctx = bridge_to_sii8620(bridge);
rc_unregister_device(ctx->rc_dev);
}
+#else
+static void sii8620_detach(struct drm_bridge *bridge)
+{
+}
+#endif
static int sii8620_is_packing_required(struct sii8620 *ctx,
const struct drm_display_mode *mode)
commit d6abe6df706c (drm/bridge: sil_sii8620: do not have a dependency of RC_CORE) changed the driver to select both RC_CORE and INPUT. However, this causes problems with other drivers, in particular an input driver that depends on MFD_INTEL_LPSS_PCI (to be added in a separate commit): drivers/clk/Kconfig:9:error: recursive dependency detected! drivers/clk/Kconfig:9: symbol COMMON_CLK is selected by MFD_INTEL_LPSS drivers/mfd/Kconfig:566: symbol MFD_INTEL_LPSS is selected by MFD_INTEL_LPSS_PCI drivers/mfd/Kconfig:580: symbol MFD_INTEL_LPSS_PCI is implied by KEYBOARD_APPLESPI drivers/input/keyboard/Kconfig:73: symbol KEYBOARD_APPLESPI depends on INPUT drivers/input/Kconfig:8: symbol INPUT is selected by DRM_SIL_SII8620 drivers/gpu/drm/bridge/Kconfig:83: symbol DRM_SIL_SII8620 depends on DRM_BRIDGE drivers/gpu/drm/bridge/Kconfig:1: symbol DRM_BRIDGE is selected by DRM_PL111 drivers/gpu/drm/pl111/Kconfig:1: symbol DRM_PL111 depends on COMMON_CLK According to the docs and general consensus, select should only be used for non user-visible symbols, but both RC_CORE and INPUT are user-visible. Furthermore almost all other references to INPUT throughout the kernel config are depends, not selects. For this reason the first part of this change reverts commit d6abe6df706c. In order to address the original reason for commit d6abe6df706c, namely that not all boards use the remote controller functionality and hence should not need have to deal with RC_CORE, the second part of this change now makes the remote control support in the driver optional and contingent on RC_CORE being defined. And with this the hard dependency on INPUT also goes away as that is only needed if RC_CORE is defined (which in turn already depends on INPUT). CC: Inki Dae <inki.dae@samsung.com> CC: Andrzej Hajda <a.hajda@samsung.com> CC: Laurent Pinchart <laurent.pinchart@ideasonboard.com> CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Ronald Tschalär <ronald@innovation.ch> --- Changes in v3, from review by Andrzej Hajda: - imply RC_CORE in Kconfig to avoid the possibility of sii8620 being built-in but rc-core being a module - completely stub out sii8620_detach() to make it consistent with the approach taken for the other rc-related functions drivers/gpu/drm/bridge/Kconfig | 3 +-- drivers/gpu/drm/bridge/sil-sii8620.c | 21 +++++++++++++++++++++ 2 files changed, 22 insertions(+), 2 deletions(-)