diff mbox series

[v4,3/9] pinctrl: sunxi: Prepare for alternative bias voltage setting methods

Message ID 20190413165418.27880-4-megous@megous.com (mailing list archive)
State New, archived
Headers show
Series Add support for Orange Pi 3 | expand

Commit Message

Ondřej Jirman April 13, 2019, 4:54 p.m. UTC
From: Ondrej Jirman <megous@megous.com>

H6 has a different I/O voltage bias setting method than A80. Prepare
existing code for using alternative bias voltage setting methods.

Signed-off-by: Ondrej Jirman <megous@megous.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
 drivers/pinctrl/sunxi/pinctrl-sun9i-a80-r.c |  2 +-
 drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c   |  2 +-
 drivers/pinctrl/sunxi/pinctrl-sunxi.c       | 47 ++++++++++++---------
 drivers/pinctrl/sunxi/pinctrl-sunxi.h       | 11 ++++-
 4 files changed, 39 insertions(+), 23 deletions(-)

Comments

Linus Walleij April 23, 2019, 10:31 a.m. UTC | #1
On Sat, Apr 13, 2019 at 6:54 PM <megous@megous.com> wrote:

> From: Ondrej Jirman <megous@megous.com>
>
> H6 has a different I/O voltage bias setting method than A80. Prepare
> existing code for using alternative bias voltage setting methods.
>
> Signed-off-by: Ondrej Jirman <megous@megous.com>
> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>

This patch applied to the pinctrl tree for v5.2.

Yours,
Linus Walleij
diff mbox series

Patch

diff --git a/drivers/pinctrl/sunxi/pinctrl-sun9i-a80-r.c b/drivers/pinctrl/sunxi/pinctrl-sun9i-a80-r.c
index e05dd9a5551d..a191a65217ac 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sun9i-a80-r.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sun9i-a80-r.c
@@ -153,7 +153,7 @@  static const struct sunxi_pinctrl_desc sun9i_a80_r_pinctrl_data = {
 	.pin_base = PL_BASE,
 	.irq_banks = 2,
 	.disable_strict_mode = true,
-	.has_io_bias_cfg = true,
+	.io_bias_cfg_variant = BIAS_VOLTAGE_GRP_CONFIG,
 };
 
 static int sun9i_a80_r_pinctrl_probe(struct platform_device *pdev)
diff --git a/drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c b/drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c
index da37d594a13d..0633a03d5e13 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c
@@ -722,7 +722,7 @@  static const struct sunxi_pinctrl_desc sun9i_a80_pinctrl_data = {
 	.npins = ARRAY_SIZE(sun9i_a80_pins),
 	.irq_banks = 5,
 	.disable_strict_mode = true,
-	.has_io_bias_cfg = true,
+	.io_bias_cfg_variant = BIAS_VOLTAGE_GRP_CONFIG,
 };
 
 static int sun9i_a80_pinctrl_probe(struct platform_device *pdev)
diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
index be04223591d4..98c4de5f4019 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
@@ -617,7 +617,7 @@  static int sunxi_pinctrl_set_io_bias_cfg(struct sunxi_pinctrl *pctl,
 	u32 val, reg;
 	int uV;
 
-	if (!pctl->desc->has_io_bias_cfg)
+	if (!pctl->desc->io_bias_cfg_variant)
 		return 0;
 
 	uV = regulator_get_voltage(supply);
@@ -628,25 +628,32 @@  static int sunxi_pinctrl_set_io_bias_cfg(struct sunxi_pinctrl *pctl,
 	if (uV == 0)
 		return 0;
 
-	/* Configured value must be equal or greater to actual voltage */
-	if (uV <= 1800000)
-		val = 0x0; /* 1.8V */
-	else if (uV <= 2500000)
-		val = 0x6; /* 2.5V */
-	else if (uV <= 2800000)
-		val = 0x9; /* 2.8V */
-	else if (uV <= 3000000)
-		val = 0xA; /* 3.0V */
-	else
-		val = 0xD; /* 3.3V */
-
-	pin -= pctl->desc->pin_base;
-
-	reg = readl(pctl->membase + sunxi_grp_config_reg(pin));
-	reg &= ~IO_BIAS_MASK;
-	writel(reg | val, pctl->membase + sunxi_grp_config_reg(pin));
-
-	return 0;
+	switch (pctl->desc->io_bias_cfg_variant) {
+	case BIAS_VOLTAGE_GRP_CONFIG:
+		/*
+		 * Configured value must be equal or greater to actual
+		 * voltage.
+		 */
+		if (uV <= 1800000)
+			val = 0x0; /* 1.8V */
+		else if (uV <= 2500000)
+			val = 0x6; /* 2.5V */
+		else if (uV <= 2800000)
+			val = 0x9; /* 2.8V */
+		else if (uV <= 3000000)
+			val = 0xA; /* 3.0V */
+		else
+			val = 0xD; /* 3.3V */
+
+		pin -= pctl->desc->pin_base;
+
+		reg = readl(pctl->membase + sunxi_grp_config_reg(pin));
+		reg &= ~IO_BIAS_MASK;
+		writel(reg | val, pctl->membase + sunxi_grp_config_reg(pin));
+		return 0;
+	default:
+		return -EINVAL;
+	}
 }
 
 static int sunxi_pmx_get_funcs_cnt(struct pinctrl_dev *pctldev)
diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.h b/drivers/pinctrl/sunxi/pinctrl-sunxi.h
index ee15ab067b5f..a62b81357136 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.h
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.h
@@ -95,6 +95,15 @@ 
 #define PINCTRL_SUN7I_A20	BIT(7)
 #define PINCTRL_SUN8I_R40	BIT(8)
 
+enum sunxi_desc_bias_voltage {
+	BIAS_VOLTAGE_NONE,
+	/*
+	 * Bias voltage configuration is done through
+	 * Pn_GRP_CONFIG registers, as seen on A80 SoC.
+	 */
+	BIAS_VOLTAGE_GRP_CONFIG,
+};
+
 struct sunxi_desc_function {
 	unsigned long	variant;
 	const char	*name;
@@ -117,7 +126,7 @@  struct sunxi_pinctrl_desc {
 	const unsigned int		*irq_bank_map;
 	bool				irq_read_needs_mux;
 	bool				disable_strict_mode;
-	bool				has_io_bias_cfg;
+	enum sunxi_desc_bias_voltage	io_bias_cfg_variant;
 };
 
 struct sunxi_pinctrl_function {