diff mbox series

[v6,1/6] drm/i915/dp: Add a config function for YCBCR420 outputs

Message ID 20190508081757.28042-2-gwan-gyeong.mun@intel.com (mailing list archive)
State New, archived
Headers show
Series drm/i915/dp: Support for DP YCbCr4:2:0 outputs | expand

Commit Message

Gwan-gyeong Mun May 8, 2019, 8:17 a.m. UTC
This patch checks a support of YCBCR420 outputs on an encoder level.
If the input mode is YCBCR420-only mode then it prepares DP as an YCBCR420
output, else it continues with RGB output mode.
It set output_format to INTEL_OUTPUT_FORMAT_YCBCR420 in order to using
a pipe scaler as RGB to YCbCr 4:4:4.

v2:
  Addressed review comments from Ville.
  Style fixed with few naming.
  %s/config/crtc_state/
  %s/intel_crtc/crtc/
  If lscon is active, it makes not to call intel_dp_ycbcr420_config()
  to avoid to clobber of lspcon_ycbcr420_config() routine.
  And it move the 420_only check into the intel_dp_ycbcr420_config().

v3: Fix uninitialized return value and it is reported by Dan Carpenter.

v4:
  Addressed review comments from Ville.
  In order to avoid the extra indentation, it inverts if-clause on
  intel_dp_ycbcr420_config().
  Remove the error print where no errors print are allowed.

v6: Rebase

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
---
 drivers/gpu/drm/i915/intel_dp.c | 35 ++++++++++++++++++++++++++++++++-
 1 file changed, 34 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 53cc4afea256..06a3417a88d1 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -2085,6 +2085,34 @@  intel_dp_compute_link_config(struct intel_encoder *encoder,
 	return 0;
 }
 
+static int
+intel_dp_ycbcr420_config(struct drm_connector *connector,
+			 struct intel_crtc_state *crtc_state)
+{
+	const struct drm_display_info *info = &connector->display_info;
+	const struct drm_display_mode *adjusted_mode =
+		&crtc_state->base.adjusted_mode;
+	struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
+	int ret;
+
+	if (!drm_mode_is_420_only(info, adjusted_mode) ||
+	    !connector->ycbcr_420_allowed)
+		return 0;
+
+	crtc_state->output_format = INTEL_OUTPUT_FORMAT_YCBCR420;
+
+	/* YCBCR 420 output conversion needs a scaler */
+	ret = skl_update_scaler_crtc(crtc_state);
+	if (ret) {
+		DRM_DEBUG_KMS("Scaler allocation for output failed\n");
+		return ret;
+	}
+
+	intel_pch_panel_fitting(crtc, crtc_state, DRM_MODE_SCALE_FULLSCREEN);
+
+	return 0;
+}
+
 bool intel_dp_limited_color_range(const struct intel_crtc_state *crtc_state,
 				  const struct drm_connector_state *conn_state)
 {
@@ -2124,7 +2152,7 @@  intel_dp_compute_config(struct intel_encoder *encoder,
 		to_intel_digital_connector_state(conn_state);
 	bool constant_n = drm_dp_has_quirk(&intel_dp->desc,
 					   DP_DPCD_QUIRK_CONSTANT_N);
-	int ret, output_bpp;
+	int ret = 0, output_bpp;
 
 	if (HAS_PCH_SPLIT(dev_priv) && !HAS_DDI(dev_priv) && port != PORT_A)
 		pipe_config->has_pch_encoder = true;
@@ -2132,6 +2160,11 @@  intel_dp_compute_config(struct intel_encoder *encoder,
 	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
 	if (lspcon->active)
 		lspcon_ycbcr420_config(&intel_connector->base, pipe_config);
+	else
+		ret = intel_dp_ycbcr420_config(&intel_connector->base, pipe_config);
+
+	if (ret)
+		return ret;
 
 	pipe_config->has_drrs = false;
 	if (IS_G4X(dev_priv) || port == PORT_A)