diff mbox series

[13/13] drm: allow render capable master with DRM_AUTH ioctls

Message ID 20190527081741.14235-13-emil.l.velikov@gmail.com (mailing list archive)
State New, archived
Headers show
Series [01/13] drm/amdgpu: introduce and honour DRM_FORCE_AUTH workaround | expand

Commit Message

Emil Velikov May 27, 2019, 8:17 a.m. UTC
From: Emil Velikov <emil.velikov@collabora.com>

There are cases (in mesa and applications) where one would open the
primary node without properly authenticating the client.

Sometimes we don't check if the authentication succeeds, but there's
also cases we simply forget to do it.

The former was a case for Mesa where it did not not check the return
value of drmGetMagic() [1]. That was fixed recently although, there's
the question of older drivers or other apps that exbibit this behaviour.

While omitting the call results in issues as seen in [2] and [3].

In the libva case, libva itself doesn't authenticate the DRM client and
the vaGetDisplayDRM documentation doesn't mention if the app should
either.

As of today, the official vainfo utility doesn't authenticate.

To workaround issues like these, some users resort to running their apps
under sudo. Which admittedly isn't always a good idea.

Since any DRIVER_RENDER driver has sufficient isolation between clients,
we can use that, for unauthenticated [primary node] ioctls that require
DRM_AUTH. But only if the respective ioctl is tagged as DRM_RENDER_ALLOW.

v2:
- Rework/simplify if check (Daniel V)
- Add examples to commit messages, elaborate. (Daniel V)

v3:
- Use single unlikely (Daniel V)

v4:
- Patch was reverted because it broke AMDGPU, apply again. The AMDGPU
issue is fixed with earlier patch.

[1] https://gitlab.freedesktop.org/mesa/mesa/blob/2bc1f5c2e70fe3b4d41f060af9859bc2a94c5b62/src/egl/drivers/dri2/platform_wayland.c#L1136
[2] https://lists.freedesktop.org/archives/libva/2016-July/004185.html
[3] https://gitlab.freedesktop.org/mesa/kmscube/issues/1
Testcase: igt/core_unauth_vs_render
Cc: intel-gfx@lists.freedesktop.org
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114085408.15933-2-emil.l.velikov@gmail.com
---
 drivers/gpu/drm/drm_ioctl.c | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

Comments

Christian König May 27, 2019, 11:56 a.m. UTC | #1
Am 27.05.19 um 10:17 schrieb Emil Velikov:
> From: Emil Velikov <emil.velikov@collabora.com>
>
> There are cases (in mesa and applications) where one would open the
> primary node without properly authenticating the client.
>
> Sometimes we don't check if the authentication succeeds, but there's
> also cases we simply forget to do it.
>
> The former was a case for Mesa where it did not not check the return
> value of drmGetMagic() [1]. That was fixed recently although, there's
> the question of older drivers or other apps that exbibit this behaviour.
>
> While omitting the call results in issues as seen in [2] and [3].
>
> In the libva case, libva itself doesn't authenticate the DRM client and
> the vaGetDisplayDRM documentation doesn't mention if the app should
> either.
>
> As of today, the official vainfo utility doesn't authenticate.
>
> To workaround issues like these, some users resort to running their apps
> under sudo. Which admittedly isn't always a good idea.
>
> Since any DRIVER_RENDER driver has sufficient isolation between clients,
> we can use that, for unauthenticated [primary node] ioctls that require
> DRM_AUTH. But only if the respective ioctl is tagged as DRM_RENDER_ALLOW.
>
> v2:
> - Rework/simplify if check (Daniel V)
> - Add examples to commit messages, elaborate. (Daniel V)
>
> v3:
> - Use single unlikely (Daniel V)
>
> v4:
> - Patch was reverted because it broke AMDGPU, apply again. The AMDGPU
> issue is fixed with earlier patch.

As far as I can see this only affects the following two IOCTLs after 
removing DRM_AUTH from the DRM_RENDER_ALLOW IOCTLs:
> DRM_IOCTL_DEF(DRM_IOCTL_PRIME_HANDLE_TO_FD, 
> drm_prime_handle_to_fd_ioctl, DRM_AUTH|DRM_UNLOCKED|DRM_RENDER_ALLOW),
>         DRM_IOCTL_DEF(DRM_IOCTL_PRIME_FD_TO_HANDLE, 
> drm_prime_fd_to_handle_ioctl, DRM_AUTH|DRM_UNLOCKED|DRM_RENDER_ALLOW)

So I think it would be simpler to just remove DRM_AUTH from those two 
instead of allowing it for everybody.

Regards,
Christian.

>
> [1] https://gitlab.freedesktop.org/mesa/mesa/blob/2bc1f5c2e70fe3b4d41f060af9859bc2a94c5b62/src/egl/drivers/dri2/platform_wayland.c#L1136
> [2] https://lists.freedesktop.org/archives/libva/2016-July/004185.html
> [3] https://gitlab.freedesktop.org/mesa/kmscube/issues/1
> Testcase: igt/core_unauth_vs_render
> Cc: intel-gfx@lists.freedesktop.org
> Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
> Link: https://patchwork.freedesktop.org/patch/msgid/20190114085408.15933-2-emil.l.velikov@gmail.com
> ---
>   drivers/gpu/drm/drm_ioctl.c | 20 ++++++++++++++++----
>   1 file changed, 16 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_ioctl.c b/drivers/gpu/drm/drm_ioctl.c
> index 9841c0076f02..b64b022a2b29 100644
> --- a/drivers/gpu/drm/drm_ioctl.c
> +++ b/drivers/gpu/drm/drm_ioctl.c
> @@ -511,6 +511,13 @@ int drm_version(struct drm_device *dev, void *data,
>   	return err;
>   }
>   
> +static inline bool
> +drm_render_driver_and_ioctl(const struct drm_device *dev, u32 flags)
> +{
> +	return drm_core_check_feature(dev, DRIVER_RENDER) &&
> +		(flags & DRM_RENDER_ALLOW);
> +}
> +
>   /**
>    * drm_ioctl_permit - Check ioctl permissions against caller
>    *
> @@ -525,14 +532,19 @@ int drm_version(struct drm_device *dev, void *data,
>    */
>   int drm_ioctl_permit(u32 flags, struct drm_file *file_priv)
>   {
> +	const struct drm_device *dev = file_priv->minor->dev;
> +
>   	/* ROOT_ONLY is only for CAP_SYS_ADMIN */
>   	if (unlikely((flags & DRM_ROOT_ONLY) && !capable(CAP_SYS_ADMIN)))
>   		return -EACCES;
>   
> -	/* AUTH is only for authenticated or render client */
> -	if (unlikely((flags & DRM_AUTH) && !drm_is_render_client(file_priv) &&
> -		     !file_priv->authenticated))
> -		return -EACCES;
> +	/* AUTH is only for master ... */
> +	if (unlikely((flags & DRM_AUTH) && drm_is_primary_client(file_priv))) {
> +		/* authenticated ones, or render capable on DRM_RENDER_ALLOW. */
> +		if (!file_priv->authenticated &&
> +		    !drm_render_driver_and_ioctl(dev, flags))
> +			return -EACCES;
> +	}
>   
>   	/* MASTER is only for master or control clients */
>   	if (unlikely((flags & DRM_MASTER) &&
Emil Velikov May 27, 2019, 12:10 p.m. UTC | #2
On 2019/05/27, Christian König wrote:
> Am 27.05.19 um 10:17 schrieb Emil Velikov:
> > From: Emil Velikov <emil.velikov@collabora.com>
> > 
> > There are cases (in mesa and applications) where one would open the
> > primary node without properly authenticating the client.
> > 
> > Sometimes we don't check if the authentication succeeds, but there's
> > also cases we simply forget to do it.
> > 
> > The former was a case for Mesa where it did not not check the return
> > value of drmGetMagic() [1]. That was fixed recently although, there's
> > the question of older drivers or other apps that exbibit this behaviour.
> > 
> > While omitting the call results in issues as seen in [2] and [3].
> > 
> > In the libva case, libva itself doesn't authenticate the DRM client and
> > the vaGetDisplayDRM documentation doesn't mention if the app should
> > either.
> > 
> > As of today, the official vainfo utility doesn't authenticate.
> > 
> > To workaround issues like these, some users resort to running their apps
> > under sudo. Which admittedly isn't always a good idea.
> > 
> > Since any DRIVER_RENDER driver has sufficient isolation between clients,
> > we can use that, for unauthenticated [primary node] ioctls that require
> > DRM_AUTH. But only if the respective ioctl is tagged as DRM_RENDER_ALLOW.
> > 
> > v2:
> > - Rework/simplify if check (Daniel V)
> > - Add examples to commit messages, elaborate. (Daniel V)
> > 
> > v3:
> > - Use single unlikely (Daniel V)
> > 
> > v4:
> > - Patch was reverted because it broke AMDGPU, apply again. The AMDGPU
> > issue is fixed with earlier patch.
> 
> As far as I can see this only affects the following two IOCTLs after
> removing DRM_AUTH from the DRM_RENDER_ALLOW IOCTLs:
> > DRM_IOCTL_DEF(DRM_IOCTL_PRIME_HANDLE_TO_FD,
> > drm_prime_handle_to_fd_ioctl, DRM_AUTH|DRM_UNLOCKED|DRM_RENDER_ALLOW),
> >         DRM_IOCTL_DEF(DRM_IOCTL_PRIME_FD_TO_HANDLE,
> > drm_prime_fd_to_handle_ioctl, DRM_AUTH|DRM_UNLOCKED|DRM_RENDER_ALLOW)
> 
> So I think it would be simpler to just remove DRM_AUTH from those two
> instead of allowing it for everybody.
> 
If I understand you correctly this will remove DRM_AUTH also for drivers
which expose only a primary node. I'm not sure if that is a good idea.

That said, if others are OK with the idea I will prepare a patch.

Thanks
Emil
Christian König May 27, 2019, 12:25 p.m. UTC | #3
Am 27.05.19 um 14:10 schrieb Emil Velikov:
> On 2019/05/27, Christian König wrote:
>> Am 27.05.19 um 10:17 schrieb Emil Velikov:
>>> From: Emil Velikov <emil.velikov@collabora.com>
>>>
>>> There are cases (in mesa and applications) where one would open the
>>> primary node without properly authenticating the client.
>>>
>>> Sometimes we don't check if the authentication succeeds, but there's
>>> also cases we simply forget to do it.
>>>
>>> The former was a case for Mesa where it did not not check the return
>>> value of drmGetMagic() [1]. That was fixed recently although, there's
>>> the question of older drivers or other apps that exbibit this behaviour.
>>>
>>> While omitting the call results in issues as seen in [2] and [3].
>>>
>>> In the libva case, libva itself doesn't authenticate the DRM client and
>>> the vaGetDisplayDRM documentation doesn't mention if the app should
>>> either.
>>>
>>> As of today, the official vainfo utility doesn't authenticate.
>>>
>>> To workaround issues like these, some users resort to running their apps
>>> under sudo. Which admittedly isn't always a good idea.
>>>
>>> Since any DRIVER_RENDER driver has sufficient isolation between clients,
>>> we can use that, for unauthenticated [primary node] ioctls that require
>>> DRM_AUTH. But only if the respective ioctl is tagged as DRM_RENDER_ALLOW.
>>>
>>> v2:
>>> - Rework/simplify if check (Daniel V)
>>> - Add examples to commit messages, elaborate. (Daniel V)
>>>
>>> v3:
>>> - Use single unlikely (Daniel V)
>>>
>>> v4:
>>> - Patch was reverted because it broke AMDGPU, apply again. The AMDGPU
>>> issue is fixed with earlier patch.
>> As far as I can see this only affects the following two IOCTLs after
>> removing DRM_AUTH from the DRM_RENDER_ALLOW IOCTLs:
>>> DRM_IOCTL_DEF(DRM_IOCTL_PRIME_HANDLE_TO_FD,
>>> drm_prime_handle_to_fd_ioctl, DRM_AUTH|DRM_UNLOCKED|DRM_RENDER_ALLOW),
>>>          DRM_IOCTL_DEF(DRM_IOCTL_PRIME_FD_TO_HANDLE,
>>> drm_prime_fd_to_handle_ioctl, DRM_AUTH|DRM_UNLOCKED|DRM_RENDER_ALLOW)
>> So I think it would be simpler to just remove DRM_AUTH from those two
>> instead of allowing it for everybody.
>>
> If I understand you correctly this will remove DRM_AUTH also for drivers
> which expose only a primary node. I'm not sure if that is a good idea.

That's a good point, but I have doubts that those drivers implement the 
necessary callbacks and/or set the core feature flag for the IOCTLs.

So the maximum what could happen is that you change the returned error 
from -EACCES into -EOPNOTSUPP/-ENOSYS.

Regards,
Christian.

> That said, if others are OK with the idea I will prepare a patch.
>
> Thanks
> Emil
Thomas Hellström (VMware) May 27, 2019, 12:39 p.m. UTC | #4
On 5/27/19 10:17 AM, Emil Velikov wrote:
> From: Emil Velikov <emil.velikov@collabora.com>
>
> There are cases (in mesa and applications) where one would open the
> primary node without properly authenticating the client.
>
> Sometimes we don't check if the authentication succeeds, but there's
> also cases we simply forget to do it.
>
> The former was a case for Mesa where it did not not check the return
> value of drmGetMagic() [1]. That was fixed recently although, there's
> the question of older drivers or other apps that exbibit this behaviour.
>
> While omitting the call results in issues as seen in [2] and [3].
>
> In the libva case, libva itself doesn't authenticate the DRM client and
> the vaGetDisplayDRM documentation doesn't mention if the app should
> either.
>
> As of today, the official vainfo utility doesn't authenticate.
>
> To workaround issues like these, some users resort to running their apps
> under sudo. Which admittedly isn't always a good idea.
>
> Since any DRIVER_RENDER driver has sufficient isolation between clients,
> we can use that, for unauthenticated [primary node] ioctls that require
> DRM_AUTH. But only if the respective ioctl is tagged as DRM_RENDER_ALLOW.
>
> v2:
> - Rework/simplify if check (Daniel V)
> - Add examples to commit messages, elaborate. (Daniel V)
>
> v3:
> - Use single unlikely (Daniel V)
>
> v4:
> - Patch was reverted because it broke AMDGPU, apply again. The AMDGPU
> issue is fixed with earlier patch.
>
> [1] https://gitlab.freedesktop.org/mesa/mesa/blob/2bc1f5c2e70fe3b4d41f060af9859bc2a94c5b62/src/egl/drivers/dri2/platform_wayland.c#L1136
> [2] https://lists.freedesktop.org/archives/libva/2016-July/004185.html
> [3] https://gitlab.freedesktop.org/mesa/kmscube/issues/1
> Testcase: igt/core_unauth_vs_render
> Cc: intel-gfx@lists.freedesktop.org
> Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
> Link: https://patchwork.freedesktop.org/patch/msgid/20190114085408.15933-2-emil.l.velikov@gmail.com
> ---
>   drivers/gpu/drm/drm_ioctl.c | 20 ++++++++++++++++----
>   1 file changed, 16 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_ioctl.c b/drivers/gpu/drm/drm_ioctl.c
> index 9841c0076f02..b64b022a2b29 100644
> --- a/drivers/gpu/drm/drm_ioctl.c
> +++ b/drivers/gpu/drm/drm_ioctl.c
> @@ -511,6 +511,13 @@ int drm_version(struct drm_device *dev, void *data,
>   	return err;
>   }
>   
> +static inline bool
> +drm_render_driver_and_ioctl(const struct drm_device *dev, u32 flags)
> +{
> +	return drm_core_check_feature(dev, DRIVER_RENDER) &&
> +		(flags & DRM_RENDER_ALLOW);
> +}
> +
>   /**
>    * drm_ioctl_permit - Check ioctl permissions against caller
>    *
> @@ -525,14 +532,19 @@ int drm_version(struct drm_device *dev, void *data,
>    */
>   int drm_ioctl_permit(u32 flags, struct drm_file *file_priv)
>   {
> +	const struct drm_device *dev = file_priv->minor->dev;
> +
>   	/* ROOT_ONLY is only for CAP_SYS_ADMIN */
>   	if (unlikely((flags & DRM_ROOT_ONLY) && !capable(CAP_SYS_ADMIN)))
>   		return -EACCES;
>   
> -	/* AUTH is only for authenticated or render client */
> -	if (unlikely((flags & DRM_AUTH) && !drm_is_render_client(file_priv) &&
> -		     !file_priv->authenticated))
> -		return -EACCES;
> +	/* AUTH is only for master ... */
> +	if (unlikely((flags & DRM_AUTH) && drm_is_primary_client(file_priv))) {
> +		/* authenticated ones, or render capable on DRM_RENDER_ALLOW. */
> +		if (!file_priv->authenticated &&
> +		    !drm_render_driver_and_ioctl(dev, flags))
> +			return -EACCES;
> +	}

This breaks vmwgfx primary client authentication in the 
surface_reference ioctl, which takes different paths in case of render 
clients and primary clients, but adding an auth check in the primary 
path in the vmwgfx code should fix this.

/Thomas


>   
>   	/* MASTER is only for master or control clients */
>   	if (unlikely((flags & DRM_MASTER) &&
Emil Velikov May 27, 2019, 12:54 p.m. UTC | #5
On 2019/05/27, Thomas Hellstrom wrote:
> On 5/27/19 10:17 AM, Emil Velikov wrote:
> > From: Emil Velikov <emil.velikov@collabora.com>
> > 
> > There are cases (in mesa and applications) where one would open the
> > primary node without properly authenticating the client.
> > 
> > Sometimes we don't check if the authentication succeeds, but there's
> > also cases we simply forget to do it.
> > 
> > The former was a case for Mesa where it did not not check the return
> > value of drmGetMagic() [1]. That was fixed recently although, there's
> > the question of older drivers or other apps that exbibit this behaviour.
> > 
> > While omitting the call results in issues as seen in [2] and [3].
> > 
> > In the libva case, libva itself doesn't authenticate the DRM client and
> > the vaGetDisplayDRM documentation doesn't mention if the app should
> > either.
> > 
> > As of today, the official vainfo utility doesn't authenticate.
> > 
> > To workaround issues like these, some users resort to running their apps
> > under sudo. Which admittedly isn't always a good idea.
> > 
> > Since any DRIVER_RENDER driver has sufficient isolation between clients,
> > we can use that, for unauthenticated [primary node] ioctls that require
> > DRM_AUTH. But only if the respective ioctl is tagged as DRM_RENDER_ALLOW.
> > 
> > v2:
> > - Rework/simplify if check (Daniel V)
> > - Add examples to commit messages, elaborate. (Daniel V)
> > 
> > v3:
> > - Use single unlikely (Daniel V)
> > 
> > v4:
> > - Patch was reverted because it broke AMDGPU, apply again. The AMDGPU
> > issue is fixed with earlier patch.
> > 
> > [1] https://gitlab.freedesktop.org/mesa/mesa/blob/2bc1f5c2e70fe3b4d41f060af9859bc2a94c5b62/src/egl/drivers/dri2/platform_wayland.c#L1136
> > [2] https://lists.freedesktop.org/archives/libva/2016-July/004185.html
> > [3] https://gitlab.freedesktop.org/mesa/kmscube/issues/1
> > Testcase: igt/core_unauth_vs_render
> > Cc: intel-gfx@lists.freedesktop.org
> > Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
> > Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
> > Link: https://patchwork.freedesktop.org/patch/msgid/20190114085408.15933-2-emil.l.velikov@gmail.com
> > ---
> >   drivers/gpu/drm/drm_ioctl.c | 20 ++++++++++++++++----
> >   1 file changed, 16 insertions(+), 4 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/drm_ioctl.c b/drivers/gpu/drm/drm_ioctl.c
> > index 9841c0076f02..b64b022a2b29 100644
> > --- a/drivers/gpu/drm/drm_ioctl.c
> > +++ b/drivers/gpu/drm/drm_ioctl.c
> > @@ -511,6 +511,13 @@ int drm_version(struct drm_device *dev, void *data,
> >   	return err;
> >   }
> > +static inline bool
> > +drm_render_driver_and_ioctl(const struct drm_device *dev, u32 flags)
> > +{
> > +	return drm_core_check_feature(dev, DRIVER_RENDER) &&
> > +		(flags & DRM_RENDER_ALLOW);
> > +}
> > +
> >   /**
> >    * drm_ioctl_permit - Check ioctl permissions against caller
> >    *
> > @@ -525,14 +532,19 @@ int drm_version(struct drm_device *dev, void *data,
> >    */
> >   int drm_ioctl_permit(u32 flags, struct drm_file *file_priv)
> >   {
> > +	const struct drm_device *dev = file_priv->minor->dev;
> > +
> >   	/* ROOT_ONLY is only for CAP_SYS_ADMIN */
> >   	if (unlikely((flags & DRM_ROOT_ONLY) && !capable(CAP_SYS_ADMIN)))
> >   		return -EACCES;
> > -	/* AUTH is only for authenticated or render client */
> > -	if (unlikely((flags & DRM_AUTH) && !drm_is_render_client(file_priv) &&
> > -		     !file_priv->authenticated))
> > -		return -EACCES;
> > +	/* AUTH is only for master ... */
> > +	if (unlikely((flags & DRM_AUTH) && drm_is_primary_client(file_priv))) {
> > +		/* authenticated ones, or render capable on DRM_RENDER_ALLOW. */
> > +		if (!file_priv->authenticated &&
> > +		    !drm_render_driver_and_ioctl(dev, flags))
> > +			return -EACCES;
> > +	}
> 
> This breaks vmwgfx primary client authentication in the surface_reference
> ioctl, which takes different paths in case of render clients and primary
> clients, but adding an auth check in the primary path in the vmwgfx code
> should fix this.
> 
Ack. Thanks for having a look. Will include a permission check in v2
of the series.

-Emil
Daniel Vetter May 27, 2019, 1:16 p.m. UTC | #6
On Mon, May 27, 2019 at 02:39:18PM +0200, Thomas Hellstrom wrote:
> On 5/27/19 10:17 AM, Emil Velikov wrote:
> > From: Emil Velikov <emil.velikov@collabora.com>
> > 
> > There are cases (in mesa and applications) where one would open the
> > primary node without properly authenticating the client.
> > 
> > Sometimes we don't check if the authentication succeeds, but there's
> > also cases we simply forget to do it.
> > 
> > The former was a case for Mesa where it did not not check the return
> > value of drmGetMagic() [1]. That was fixed recently although, there's
> > the question of older drivers or other apps that exbibit this behaviour.
> > 
> > While omitting the call results in issues as seen in [2] and [3].
> > 
> > In the libva case, libva itself doesn't authenticate the DRM client and
> > the vaGetDisplayDRM documentation doesn't mention if the app should
> > either.
> > 
> > As of today, the official vainfo utility doesn't authenticate.
> > 
> > To workaround issues like these, some users resort to running their apps
> > under sudo. Which admittedly isn't always a good idea.
> > 
> > Since any DRIVER_RENDER driver has sufficient isolation between clients,
> > we can use that, for unauthenticated [primary node] ioctls that require
> > DRM_AUTH. But only if the respective ioctl is tagged as DRM_RENDER_ALLOW.
> > 
> > v2:
> > - Rework/simplify if check (Daniel V)
> > - Add examples to commit messages, elaborate. (Daniel V)
> > 
> > v3:
> > - Use single unlikely (Daniel V)
> > 
> > v4:
> > - Patch was reverted because it broke AMDGPU, apply again. The AMDGPU
> > issue is fixed with earlier patch.
> > 
> > [1] https://gitlab.freedesktop.org/mesa/mesa/blob/2bc1f5c2e70fe3b4d41f060af9859bc2a94c5b62/src/egl/drivers/dri2/platform_wayland.c#L1136
> > [2] https://lists.freedesktop.org/archives/libva/2016-July/004185.html
> > [3] https://gitlab.freedesktop.org/mesa/kmscube/issues/1
> > Testcase: igt/core_unauth_vs_render
> > Cc: intel-gfx@lists.freedesktop.org
> > Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
> > Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
> > Link: https://patchwork.freedesktop.org/patch/msgid/20190114085408.15933-2-emil.l.velikov@gmail.com
> > ---
> >   drivers/gpu/drm/drm_ioctl.c | 20 ++++++++++++++++----
> >   1 file changed, 16 insertions(+), 4 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/drm_ioctl.c b/drivers/gpu/drm/drm_ioctl.c
> > index 9841c0076f02..b64b022a2b29 100644
> > --- a/drivers/gpu/drm/drm_ioctl.c
> > +++ b/drivers/gpu/drm/drm_ioctl.c
> > @@ -511,6 +511,13 @@ int drm_version(struct drm_device *dev, void *data,
> >   	return err;
> >   }
> > +static inline bool
> > +drm_render_driver_and_ioctl(const struct drm_device *dev, u32 flags)
> > +{
> > +	return drm_core_check_feature(dev, DRIVER_RENDER) &&
> > +		(flags & DRM_RENDER_ALLOW);
> > +}
> > +
> >   /**
> >    * drm_ioctl_permit - Check ioctl permissions against caller
> >    *
> > @@ -525,14 +532,19 @@ int drm_version(struct drm_device *dev, void *data,
> >    */
> >   int drm_ioctl_permit(u32 flags, struct drm_file *file_priv)
> >   {
> > +	const struct drm_device *dev = file_priv->minor->dev;
> > +
> >   	/* ROOT_ONLY is only for CAP_SYS_ADMIN */
> >   	if (unlikely((flags & DRM_ROOT_ONLY) && !capable(CAP_SYS_ADMIN)))
> >   		return -EACCES;
> > -	/* AUTH is only for authenticated or render client */
> > -	if (unlikely((flags & DRM_AUTH) && !drm_is_render_client(file_priv) &&
> > -		     !file_priv->authenticated))
> > -		return -EACCES;
> > +	/* AUTH is only for master ... */
> > +	if (unlikely((flags & DRM_AUTH) && drm_is_primary_client(file_priv))) {
> > +		/* authenticated ones, or render capable on DRM_RENDER_ALLOW. */
> > +		if (!file_priv->authenticated &&
> > +		    !drm_render_driver_and_ioctl(dev, flags))
> > +			return -EACCES;
> > +	}
> 
> This breaks vmwgfx primary client authentication in the surface_reference
> ioctl, which takes different paths in case of render clients and primary
> clients, but adding an auth check in the primary path in the vmwgfx code
> should fix this.

Hm yeah we need to adjust that ... otoh kinda not sure why this is gated
on authentication status, and not on "am I master or not" status. At least
from a very cursory read ...
-Daniel

> 
> /Thomas
> 
> 
> >   	/* MASTER is only for master or control clients */
> >   	if (unlikely((flags & DRM_MASTER) &&
> 
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
Thomas Hellström (VMware) May 27, 2019, 2:01 p.m. UTC | #7
On 5/27/19 3:16 PM, Daniel Vetter wrote:
> On Mon, May 27, 2019 at 02:39:18PM +0200, Thomas Hellstrom wrote:
>> On 5/27/19 10:17 AM, Emil Velikov wrote:
>>> From: Emil Velikov <emil.velikov@collabora.com>
>>>
>>> There are cases (in mesa and applications) where one would open the
>>> primary node without properly authenticating the client.
>>>
>>> Sometimes we don't check if the authentication succeeds, but there's
>>> also cases we simply forget to do it.
>>>
>>> The former was a case for Mesa where it did not not check the return
>>> value of drmGetMagic() [1]. That was fixed recently although, there's
>>> the question of older drivers or other apps that exbibit this behaviour.
>>>
>>> While omitting the call results in issues as seen in [2] and [3].
>>>
>>> In the libva case, libva itself doesn't authenticate the DRM client and
>>> the vaGetDisplayDRM documentation doesn't mention if the app should
>>> either.
>>>
>>> As of today, the official vainfo utility doesn't authenticate.
>>>
>>> To workaround issues like these, some users resort to running their apps
>>> under sudo. Which admittedly isn't always a good idea.
>>>
>>> Since any DRIVER_RENDER driver has sufficient isolation between clients,
>>> we can use that, for unauthenticated [primary node] ioctls that require
>>> DRM_AUTH. But only if the respective ioctl is tagged as DRM_RENDER_ALLOW.
>>>
>>> v2:
>>> - Rework/simplify if check (Daniel V)
>>> - Add examples to commit messages, elaborate. (Daniel V)
>>>
>>> v3:
>>> - Use single unlikely (Daniel V)
>>>
>>> v4:
>>> - Patch was reverted because it broke AMDGPU, apply again. The AMDGPU
>>> issue is fixed with earlier patch.
>>>
>>> [1] https://gitlab.freedesktop.org/mesa/mesa/blob/2bc1f5c2e70fe3b4d41f060af9859bc2a94c5b62/src/egl/drivers/dri2/platform_wayland.c#L1136
>>> [2] https://lists.freedesktop.org/archives/libva/2016-July/004185.html
>>> [3] https://gitlab.freedesktop.org/mesa/kmscube/issues/1
>>> Testcase: igt/core_unauth_vs_render
>>> Cc: intel-gfx@lists.freedesktop.org
>>> Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
>>> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
>>> Link: https://patchwork.freedesktop.org/patch/msgid/20190114085408.15933-2-emil.l.velikov@gmail.com
>>> ---
>>>    drivers/gpu/drm/drm_ioctl.c | 20 ++++++++++++++++----
>>>    1 file changed, 16 insertions(+), 4 deletions(-)
>>>
>>> diff --git a/drivers/gpu/drm/drm_ioctl.c b/drivers/gpu/drm/drm_ioctl.c
>>> index 9841c0076f02..b64b022a2b29 100644
>>> --- a/drivers/gpu/drm/drm_ioctl.c
>>> +++ b/drivers/gpu/drm/drm_ioctl.c
>>> @@ -511,6 +511,13 @@ int drm_version(struct drm_device *dev, void *data,
>>>    	return err;
>>>    }
>>> +static inline bool
>>> +drm_render_driver_and_ioctl(const struct drm_device *dev, u32 flags)
>>> +{
>>> +	return drm_core_check_feature(dev, DRIVER_RENDER) &&
>>> +		(flags & DRM_RENDER_ALLOW);
>>> +}
>>> +
>>>    /**
>>>     * drm_ioctl_permit - Check ioctl permissions against caller
>>>     *
>>> @@ -525,14 +532,19 @@ int drm_version(struct drm_device *dev, void *data,
>>>     */
>>>    int drm_ioctl_permit(u32 flags, struct drm_file *file_priv)
>>>    {
>>> +	const struct drm_device *dev = file_priv->minor->dev;
>>> +
>>>    	/* ROOT_ONLY is only for CAP_SYS_ADMIN */
>>>    	if (unlikely((flags & DRM_ROOT_ONLY) && !capable(CAP_SYS_ADMIN)))
>>>    		return -EACCES;
>>> -	/* AUTH is only for authenticated or render client */
>>> -	if (unlikely((flags & DRM_AUTH) && !drm_is_render_client(file_priv) &&
>>> -		     !file_priv->authenticated))
>>> -		return -EACCES;
>>> +	/* AUTH is only for master ... */
>>> +	if (unlikely((flags & DRM_AUTH) && drm_is_primary_client(file_priv))) {
>>> +		/* authenticated ones, or render capable on DRM_RENDER_ALLOW. */
>>> +		if (!file_priv->authenticated &&
>>> +		    !drm_render_driver_and_ioctl(dev, flags))
>>> +			return -EACCES;
>>> +	}
>> This breaks vmwgfx primary client authentication in the surface_reference
>> ioctl, which takes different paths in case of render clients and primary
>> clients, but adding an auth check in the primary path in the vmwgfx code
>> should fix this.
> Hm yeah we need to adjust that ... otoh kinda not sure why this is gated
> on authentication status, and not on "am I master or not" status. At least
> from a very cursory read ...
> -Daniel

The code snippet in question is:


         if (drm_is_primary_client(file_priv) &&
             user_srf->master != file_priv->master) {
             DRM_ERROR("Trying to reference surface outside of"
                   " master domain.\n");
             ret = -EACCES;
             goto out_bad_resource;
         }


In gem term's this means a client can't open a surface that hasn't been 
flinked by a client in the same master realm: You can't read from 
resources belonging to another X server's clients....

/Thomas



>
>> /Thomas
>>
>>
>>>    	/* MASTER is only for master or control clients */
>>>    	if (unlikely((flags & DRM_MASTER) &&
>>
>> _______________________________________________
>> dri-devel mailing list
>> dri-devel@lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/dri-devel
Daniel Vetter May 27, 2019, 3:22 p.m. UTC | #8
On Mon, May 27, 2019 at 4:01 PM Thomas Hellstrom <thomas@shipmail.org> wrote:
>
> On 5/27/19 3:16 PM, Daniel Vetter wrote:
> > On Mon, May 27, 2019 at 02:39:18PM +0200, Thomas Hellstrom wrote:
> >> On 5/27/19 10:17 AM, Emil Velikov wrote:
> >>> From: Emil Velikov <emil.velikov@collabora.com>
> >>>
> >>> There are cases (in mesa and applications) where one would open the
> >>> primary node without properly authenticating the client.
> >>>
> >>> Sometimes we don't check if the authentication succeeds, but there's
> >>> also cases we simply forget to do it.
> >>>
> >>> The former was a case for Mesa where it did not not check the return
> >>> value of drmGetMagic() [1]. That was fixed recently although, there's
> >>> the question of older drivers or other apps that exbibit this behaviour.
> >>>
> >>> While omitting the call results in issues as seen in [2] and [3].
> >>>
> >>> In the libva case, libva itself doesn't authenticate the DRM client and
> >>> the vaGetDisplayDRM documentation doesn't mention if the app should
> >>> either.
> >>>
> >>> As of today, the official vainfo utility doesn't authenticate.
> >>>
> >>> To workaround issues like these, some users resort to running their apps
> >>> under sudo. Which admittedly isn't always a good idea.
> >>>
> >>> Since any DRIVER_RENDER driver has sufficient isolation between clients,
> >>> we can use that, for unauthenticated [primary node] ioctls that require
> >>> DRM_AUTH. But only if the respective ioctl is tagged as DRM_RENDER_ALLOW.
> >>>
> >>> v2:
> >>> - Rework/simplify if check (Daniel V)
> >>> - Add examples to commit messages, elaborate. (Daniel V)
> >>>
> >>> v3:
> >>> - Use single unlikely (Daniel V)
> >>>
> >>> v4:
> >>> - Patch was reverted because it broke AMDGPU, apply again. The AMDGPU
> >>> issue is fixed with earlier patch.
> >>>
> >>> [1] https://gitlab.freedesktop.org/mesa/mesa/blob/2bc1f5c2e70fe3b4d41f060af9859bc2a94c5b62/src/egl/drivers/dri2/platform_wayland.c#L1136
> >>> [2] https://lists.freedesktop.org/archives/libva/2016-July/004185.html
> >>> [3] https://gitlab.freedesktop.org/mesa/kmscube/issues/1
> >>> Testcase: igt/core_unauth_vs_render
> >>> Cc: intel-gfx@lists.freedesktop.org
> >>> Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
> >>> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
> >>> Link: https://patchwork.freedesktop.org/patch/msgid/20190114085408.15933-2-emil.l.velikov@gmail.com
> >>> ---
> >>>    drivers/gpu/drm/drm_ioctl.c | 20 ++++++++++++++++----
> >>>    1 file changed, 16 insertions(+), 4 deletions(-)
> >>>
> >>> diff --git a/drivers/gpu/drm/drm_ioctl.c b/drivers/gpu/drm/drm_ioctl.c
> >>> index 9841c0076f02..b64b022a2b29 100644
> >>> --- a/drivers/gpu/drm/drm_ioctl.c
> >>> +++ b/drivers/gpu/drm/drm_ioctl.c
> >>> @@ -511,6 +511,13 @@ int drm_version(struct drm_device *dev, void *data,
> >>>     return err;
> >>>    }
> >>> +static inline bool
> >>> +drm_render_driver_and_ioctl(const struct drm_device *dev, u32 flags)
> >>> +{
> >>> +   return drm_core_check_feature(dev, DRIVER_RENDER) &&
> >>> +           (flags & DRM_RENDER_ALLOW);
> >>> +}
> >>> +
> >>>    /**
> >>>     * drm_ioctl_permit - Check ioctl permissions against caller
> >>>     *
> >>> @@ -525,14 +532,19 @@ int drm_version(struct drm_device *dev, void *data,
> >>>     */
> >>>    int drm_ioctl_permit(u32 flags, struct drm_file *file_priv)
> >>>    {
> >>> +   const struct drm_device *dev = file_priv->minor->dev;
> >>> +
> >>>     /* ROOT_ONLY is only for CAP_SYS_ADMIN */
> >>>     if (unlikely((flags & DRM_ROOT_ONLY) && !capable(CAP_SYS_ADMIN)))
> >>>             return -EACCES;
> >>> -   /* AUTH is only for authenticated or render client */
> >>> -   if (unlikely((flags & DRM_AUTH) && !drm_is_render_client(file_priv) &&
> >>> -                !file_priv->authenticated))
> >>> -           return -EACCES;
> >>> +   /* AUTH is only for master ... */
> >>> +   if (unlikely((flags & DRM_AUTH) && drm_is_primary_client(file_priv))) {
> >>> +           /* authenticated ones, or render capable on DRM_RENDER_ALLOW. */
> >>> +           if (!file_priv->authenticated &&
> >>> +               !drm_render_driver_and_ioctl(dev, flags))
> >>> +                   return -EACCES;
> >>> +   }
> >> This breaks vmwgfx primary client authentication in the surface_reference
> >> ioctl, which takes different paths in case of render clients and primary
> >> clients, but adding an auth check in the primary path in the vmwgfx code
> >> should fix this.
> > Hm yeah we need to adjust that ... otoh kinda not sure why this is gated
> > on authentication status, and not on "am I master or not" status. At least
> > from a very cursory read ...
> > -Daniel
>
> The code snippet in question is:
>
>
>          if (drm_is_primary_client(file_priv) &&
>              user_srf->master != file_priv->master) {
>              DRM_ERROR("Trying to reference surface outside of"
>                    " master domain.\n");
>              ret = -EACCES;
>              goto out_bad_resource;
>          }
>
>
> In gem term's this means a client can't open a surface that hasn't been
> flinked by a client in the same master realm: You can't read from
> resources belonging to another X server's clients....

Uh, I read something completely different in there. I guess I didn't
really follow what's going on there :-)
-Daniel

>
> /Thomas
>
>
>
> >
> >> /Thomas
> >>
> >>
> >>>     /* MASTER is only for master or control clients */
> >>>     if (unlikely((flags & DRM_MASTER) &&
> >>
> >> _______________________________________________
> >> dri-devel mailing list
> >> dri-devel@lists.freedesktop.org
> >> https://lists.freedesktop.org/mailman/listinfo/dri-devel
>
>
diff mbox series

Patch

diff --git a/drivers/gpu/drm/drm_ioctl.c b/drivers/gpu/drm/drm_ioctl.c
index 9841c0076f02..b64b022a2b29 100644
--- a/drivers/gpu/drm/drm_ioctl.c
+++ b/drivers/gpu/drm/drm_ioctl.c
@@ -511,6 +511,13 @@  int drm_version(struct drm_device *dev, void *data,
 	return err;
 }
 
+static inline bool
+drm_render_driver_and_ioctl(const struct drm_device *dev, u32 flags)
+{
+	return drm_core_check_feature(dev, DRIVER_RENDER) &&
+		(flags & DRM_RENDER_ALLOW);
+}
+
 /**
  * drm_ioctl_permit - Check ioctl permissions against caller
  *
@@ -525,14 +532,19 @@  int drm_version(struct drm_device *dev, void *data,
  */
 int drm_ioctl_permit(u32 flags, struct drm_file *file_priv)
 {
+	const struct drm_device *dev = file_priv->minor->dev;
+
 	/* ROOT_ONLY is only for CAP_SYS_ADMIN */
 	if (unlikely((flags & DRM_ROOT_ONLY) && !capable(CAP_SYS_ADMIN)))
 		return -EACCES;
 
-	/* AUTH is only for authenticated or render client */
-	if (unlikely((flags & DRM_AUTH) && !drm_is_render_client(file_priv) &&
-		     !file_priv->authenticated))
-		return -EACCES;
+	/* AUTH is only for master ... */
+	if (unlikely((flags & DRM_AUTH) && drm_is_primary_client(file_priv))) {
+		/* authenticated ones, or render capable on DRM_RENDER_ALLOW. */
+		if (!file_priv->authenticated &&
+		    !drm_render_driver_and_ioctl(dev, flags))
+			return -EACCES;
+	}
 
 	/* MASTER is only for master or control clients */
 	if (unlikely((flags & DRM_MASTER) &&