From patchwork Sun Jul 7 18:19:02 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Laurent Pinchart X-Patchwork-Id: 11034225 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 85007912 for ; Sun, 7 Jul 2019 18:29:25 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 7203427FAC for ; Sun, 7 Jul 2019 18:29:25 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 646732837D; Sun, 7 Jul 2019 18:29:25 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-5.2 required=2.0 tests=BAYES_00,MAILING_LIST_MULTI, RCVD_IN_DNSWL_MED autolearn=ham version=3.3.1 Received: from gabe.freedesktop.org (gabe.freedesktop.org [131.252.210.177]) (using TLSv1.2 with cipher DHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.wl.linuxfoundation.org (Postfix) with ESMTPS id 7964F27FAC for ; Sun, 7 Jul 2019 18:29:24 +0000 (UTC) Received: from gabe.freedesktop.org (localhost [127.0.0.1]) by gabe.freedesktop.org (Postfix) with ESMTP id 9E3BD892BB; Sun, 7 Jul 2019 18:29:23 +0000 (UTC) X-Original-To: dri-devel@lists.freedesktop.org Delivered-To: dri-devel@lists.freedesktop.org Received: from perceval.ideasonboard.com (perceval.ideasonboard.com [213.167.242.64]) by gabe.freedesktop.org (Postfix) with ESMTPS id 329F3892BB for ; Sun, 7 Jul 2019 18:29:22 +0000 (UTC) Received: from pendragon.nordic-sky.finnair.com (unknown [38.98.37.142]) by perceval.ideasonboard.com (Postfix) with ESMTPSA id 5DCDB334; Sun, 7 Jul 2019 20:29:02 +0200 (CEST) From: Laurent Pinchart To: dri-devel@lists.freedesktop.org Subject: [PATCH 25/60] drm: Add helper to create a connector for a chain of bridges Date: Sun, 7 Jul 2019 21:19:02 +0300 Message-Id: <20190707181937.6250-22-laurent.pinchart@ideasonboard.com> X-Mailer: git-send-email 2.21.0 In-Reply-To: <20190707181937.6250-1-laurent.pinchart@ideasonboard.com> References: <20190707180852.5512-1-laurent.pinchart@ideasonboard.com> <20190707181937.6250-1-laurent.pinchart@ideasonboard.com> MIME-Version: 1.0 X-Mailman-Original-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=ideasonboard.com; s=mail; t=1562524160; bh=bqJltgiiPDXsr7k75W1Au5sNEZDrnd0XX2UFrbdJKPo=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=nJ5bIIjvFPFRLZRb5FgpU9kJC1kQNfACrISJE/X2UgwC8dB/NdqFFcJYSoSbTcBf1 V0OV8KFbpzeBfVC4Gk0JOCQHCTkSm74f6kcUoU0Rt4oNtJX39ELgn6JqeXEpMQ0z5j BSlXSoPJM9I+ppVmjO2/XwBPLr6U21aB/gmxKkBc= X-BeenThere: dri-devel@lists.freedesktop.org X-Mailman-Version: 2.1.23 Precedence: list List-Id: Direct Rendering Infrastructure - Development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Maxime Ripard , Sebastian Reichel , Tomi Valkeinen , Sean Paul Errors-To: dri-devel-bounces@lists.freedesktop.org Sender: "dri-devel" X-Virus-Scanned: ClamAV using ClamSMTP Most bridge drivers create a DRM connector to model the connector at the output of the bridge. This model is historical and has worked pretty well so far, but causes several issues: - It prevents supporting more complex display pipelines where DRM connector operations are split over multiple components. For instance a pipeline with a bridge connected to the DDC signals to read EDID data, and another one connected to the HPD signal to detect connection and disconnection, will not be possible to support through this model. - It requires every bridge driver to implement similar connector handling code, resulting in code duplication. - It assumes that a bridge will either be wired to a connector or to another bridge, but doesn't support bridges that can be used in both positions very well (although there is some ad-hoc support for this in the analogix_dp bridge driver). In order to solve these issues, ownership of the connector needs to be moved to the display controller driver. To avoid code duplication in display controller drivers, add a new helper to create and manage a DRM connector backed by a chain of bridges. All connector operations are delegating to the appropriate bridge in the chain. Signed-off-by: Laurent Pinchart --- drivers/gpu/drm/Makefile | 3 +- drivers/gpu/drm/drm_bridge_connector.c | 385 +++++++++++++++++++++++++ include/drm/drm_bridge_connector.h | 18 ++ 3 files changed, 405 insertions(+), 1 deletion(-) create mode 100644 drivers/gpu/drm/drm_bridge_connector.c create mode 100644 include/drm/drm_bridge_connector.h diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index 9f0d2ee35794..1b74653c9db9 100644 --- a/drivers/gpu/drm/Makefile +++ b/drivers/gpu/drm/Makefile @@ -37,7 +37,8 @@ drm_vram_helper-y := drm_gem_vram_helper.o \ drm_vram_mm_helper.o obj-$(CONFIG_DRM_VRAM_HELPER) += drm_vram_helper.o -drm_kms_helper-y := drm_crtc_helper.o drm_dp_helper.o drm_dsc.o drm_probe_helper.o \ +drm_kms_helper-y := drm_bridge_connector.o drm_crtc_helper.o drm_dp_helper.o \ + drm_dsc.o drm_probe_helper.o \ drm_plane_helper.o drm_dp_mst_topology.o drm_atomic_helper.o \ drm_kms_helper_common.o drm_dp_dual_mode_helper.o \ drm_simple_kms_helper.o drm_modeset_helper.o \ diff --git a/drivers/gpu/drm/drm_bridge_connector.c b/drivers/gpu/drm/drm_bridge_connector.c new file mode 100644 index 000000000000..09f2d6bfb561 --- /dev/null +++ b/drivers/gpu/drm/drm_bridge_connector.c @@ -0,0 +1,385 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Laurent Pinchart + */ + +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +/** + * DOC: overview + * + * The DRM bridge connector helper object provides a DRM connector + * implementation that wraps a chain of &struct drm_bridge. The connector + * operations are fully implemented based on the operations of the bridges in + * the chain, and don't require any intervention from the display controller + * driver at runtime. + * + * To use the helper, display controller drivers create a bridge connector with + * a call to drm_bridge_connector_init(). This associates the newly created + * connector with the chain of bridges passed to the function and registers it + * with the DRM device. At that point the connector becomes fully usable, no + * further operation is needed. + * + * The DRM bridge connector operations are implemented based on the operations + * provided by the bridges in the chain. Each connector operation is delegated + * to the bridge closest to the connector (at the end of the chain) that + * provides the relevant functionality. + * + * To make use of this helper, all bridges in the chain shall report bridge + * operation flags (&drm_bridge->ops) and bridge output type + * (&drm_bridge->type), and none of them may create a DRM connector directly. + */ + +/** + * struct drm_bridge_connector - A connector backed by a chain of bridges + */ +struct drm_bridge_connector { + /** + * @base: The base DRM connector + */ + struct drm_connector base; + /** + * @bridge: + * + * The first bridge in the chain (connected to the output of the CRTC). + */ + struct drm_bridge *bridge; + /** + * @bridge_edid: + * + * The last bridge in the chain (closest to the connector) that provides + * EDID read support, if any (see &DRM_BRIDGE_OP_EDID). + */ + struct drm_bridge *bridge_edid; + /** + * @bridge_hpd: + * + * The last bridge in the chain (closest to the connector) that provides + * hot-plug detection notification, if any (see &DRM_BRIDGE_OP_HPD). + */ + struct drm_bridge *bridge_hpd; + /** + * @bridge_detect: + * + * The last bridge in the chain (closest to the connector) that provides + * connector detection, if any (see &DRM_BRIDGE_OP_DETECT). + */ + struct drm_bridge *bridge_detect; + /** + * @bridge_detect: + * + * The last bridge in the chain (closest to the connector) that provides + * connector modes detection, if any (see &DRM_BRIDGE_OP_MODES). + */ + struct drm_bridge *bridge_modes; + /** + * @hdmi_mode: Valid for HDMI connectors only. + */ + bool hdmi_mode; +}; + +#define to_drm_bridge_connector(x) \ + container_of(x, struct drm_bridge_connector, base) + +/* ----------------------------------------------------------------------------- + * Bridge Connector Hot-Plug Handling + */ + +static void drm_bridge_connector_hpd_notify(struct drm_connector *connector, + enum drm_connector_status status) +{ + struct drm_bridge_connector *bridge_connector = + to_drm_bridge_connector(connector); + struct drm_bridge *bridge; + + if (status != connector_status_disconnected) + return; + + /* + * Notify all bridges in the pipeline of disconnection. This is required + * to let the HDMI encoders reset their internal state related to + * connection status, such as the CEC address. + */ + for (bridge = bridge_connector->bridge; bridge; bridge = bridge->next) { + if (bridge->funcs->lost_hotplug) + bridge->funcs->lost_hotplug(bridge); + } +} + +static void drm_bridge_connector_hpd_cb(void *cb_data, + enum drm_connector_status status) +{ + struct drm_bridge_connector *drm_bridge_connector = cb_data; + struct drm_connector *connector = &drm_bridge_connector->base; + struct drm_device *dev = connector->dev; + enum drm_connector_status old_status; + + mutex_lock(&dev->mode_config.mutex); + old_status = connector->status; + connector->status = status; + mutex_unlock(&dev->mode_config.mutex); + + if (old_status == status) + return; + + drm_bridge_connector_hpd_notify(connector, status); + + drm_kms_helper_hotplug_event(dev); +} + +/** + * drm_bridge_connector_enable_hpd - Enable hot-plug detection for the connector + * @connector: The DRM bridge connector + * + * This function enables hot-plug detection for the given bridge connector. + * This is typically used by display drivers in their resume handler. + */ +void drm_bridge_connector_enable_hpd(struct drm_connector *connector) +{ + struct drm_bridge_connector *bridge_connector = + to_drm_bridge_connector(connector); + struct drm_bridge *hpd = bridge_connector->bridge_hpd; + + if (hpd) + drm_bridge_hpd_enable(hpd, drm_bridge_connector_hpd_cb, + bridge_connector); +} +EXPORT_SYMBOL_GPL(drm_bridge_connector_enable_hpd); + +/** + * drm_bridge_connector_disable_hpd - Disable hot-plug detection for the + * connector + * @connector: The DRM bridge connector + * + * This function disables hot-plug detection for the given bridge connector. + * This is typically used by display drivers in their suspend handler. + */ +void drm_bridge_connector_disable_hpd(struct drm_connector *connector) +{ + struct drm_bridge_connector *bridge_connector = + to_drm_bridge_connector(connector); + struct drm_bridge *hpd = bridge_connector->bridge_hpd; + + if (hpd) + drm_bridge_hpd_disable(hpd); +} +EXPORT_SYMBOL_GPL(drm_bridge_connector_disable_hpd); + +/* ----------------------------------------------------------------------------- + * Bridge Connector Functions + */ + +static enum drm_connector_status +drm_bridge_connector_detect(struct drm_connector *connector, bool force) +{ + struct drm_bridge_connector *bridge_connector = + to_drm_bridge_connector(connector); + struct drm_bridge *detect = bridge_connector->bridge_detect; + enum drm_connector_status status; + + if (detect) { + status = detect->funcs->detect(detect); + + drm_bridge_connector_hpd_notify(connector, status); + } else { + switch (connector->connector_type) { + case DRM_MODE_CONNECTOR_DPI: + case DRM_MODE_CONNECTOR_LVDS: + case DRM_MODE_CONNECTOR_DSI: + status = connector_status_connected; + break; + default: + status = connector_status_unknown; + break; + } + } + + return status; +} + +static void drm_bridge_connector_destroy(struct drm_connector *connector) +{ + struct drm_bridge_connector *bridge_connector = + to_drm_bridge_connector(connector); + + if (bridge_connector->bridge_hpd) { + struct drm_bridge *hpd = bridge_connector->bridge_hpd; + + drm_bridge_hpd_disable(hpd); + } + + drm_connector_unregister(connector); + drm_connector_cleanup(connector); + + kfree(bridge_connector); +} + +static const struct drm_connector_funcs drm_bridge_connector_funcs = { + .reset = drm_atomic_helper_connector_reset, + .detect = drm_bridge_connector_detect, + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = drm_bridge_connector_destroy, + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, +}; + +/* ----------------------------------------------------------------------------- + * Bridge Connector Helper Functions + */ + +#define MAX_EDID 512 + +static int drm_bridge_connector_get_modes_edid(struct drm_connector *connector, + struct drm_bridge *bridge) +{ + struct drm_bridge_connector *bridge_connector = + to_drm_bridge_connector(connector); + enum drm_connector_status status; + struct edid *edid; + int n; + + status = drm_bridge_connector_detect(connector, false); + if (status != connector_status_connected) + goto no_edid; + + edid = bridge->funcs->get_edid(bridge, connector); + if (!edid || !drm_edid_is_valid(edid)) { + kfree(edid); + goto no_edid; + } + + drm_connector_update_edid_property(connector, edid); + n = drm_add_edid_modes(connector, edid); + + bridge_connector->hdmi_mode = drm_detect_hdmi_monitor(edid); + + kfree(edid); + return n; + +no_edid: + drm_connector_update_edid_property(connector, NULL); + return 0; +} + +static int drm_bridge_connector_get_modes(struct drm_connector *connector) +{ + struct drm_bridge_connector *bridge_connector = + to_drm_bridge_connector(connector); + struct drm_bridge *bridge; + + /* + * If display exposes EDID, then we parse that in the normal way to + * build table of supported modes. + */ + bridge = bridge_connector->bridge_edid; + if (bridge) + return drm_bridge_connector_get_modes_edid(connector, bridge); + + /* + * Otherwise if the display pipeline reports modes (e.g. with a fixed + * resolution panel or an analog TV output), query it. + */ + bridge = bridge_connector->bridge_modes; + if (bridge) + return bridge->funcs->get_modes(bridge, connector); + + /* + * We can't retrieve modes, which can happen for instance for a DVI or + * VGA output with the DDC bus unconnected. The KMS core will add the + * default modes. + */ + return 0; +} + +static const struct drm_connector_helper_funcs drm_bridge_connector_helper_funcs = { + .get_modes = drm_bridge_connector_get_modes, + /* No need for .mode_valid(), the bridges are checked by the core. */ +}; + +/* ----------------------------------------------------------------------------- + * Bridge Connector Initialisation + */ + +/** + * drm_bridge_connector_init - Initialise a connector for a chain of bridges + * @drm: the DRM device + * @bridge: the bridge closest to the CRTC output + * + * Allocate, initialise and register a &drm_bridge_connector with the @drm + * device. The connector is associated with a chain of bridges that starts at + * the CRTC output with @bridge. All bridges in the chain shall report bridge + * operation flags (&drm_bridge->ops) and bridge output type + * (&drm_bridge->type), and none of them may create a DRM connector directly. + * + * Returns a pointer to the new connector on success, or a negative error + * pointer otherwise. + */ +struct drm_connector *drm_bridge_connector_init(struct drm_device *drm, + struct drm_bridge *bridge) +{ + struct drm_bridge_connector *bridge_connector; + struct drm_connector *connector; + int connector_type; + + bridge_connector = kzalloc(sizeof(*bridge_connector), GFP_KERNEL); + if (!bridge_connector) + return ERR_PTR(-ENOMEM); + + bridge_connector->bridge = bridge; + + /* + * Initialise connector status handling. First locate the furthest + * bridges in the pipeline that support HPD and output detection. Then + * initialise the connector polling mode, using HPD if available and + * falling back to polling if supported. If neither HPD nor output + * detection are available, we don't support hotplug detection at all. + */ + connector_type = DRM_MODE_CONNECTOR_Unknown; + for ( ; bridge; bridge = bridge->next) { + if (bridge->ops & DRM_BRIDGE_OP_EDID) + bridge_connector->bridge_edid = bridge; + if (bridge->ops & DRM_BRIDGE_OP_HPD) + bridge_connector->bridge_hpd = bridge; + if (bridge->ops & DRM_BRIDGE_OP_DETECT) + bridge_connector->bridge_detect = bridge; + if (bridge->ops & DRM_BRIDGE_OP_MODES) + bridge_connector->bridge_modes = bridge; + + if (!bridge->next) + connector_type = bridge->type; + } + + if (connector_type == DRM_MODE_CONNECTOR_Unknown) { + kfree(bridge_connector); + return ERR_PTR(-EINVAL); + } + + /* + * TODO: Handle interlace_allowed, doublescan_allowed, stereo_allowed + * and ycbcr_420_allowed. + */ + connector = &bridge_connector->base; + drm_connector_init(drm, connector, &drm_bridge_connector_funcs, + connector_type); + drm_connector_helper_add(connector, &drm_bridge_connector_helper_funcs); + + if (bridge_connector->bridge_hpd) + connector->polled = DRM_CONNECTOR_POLL_HPD; + else if (bridge_connector->bridge_detect) + connector->polled = DRM_CONNECTOR_POLL_CONNECT + | DRM_CONNECTOR_POLL_DISCONNECT; + + return connector; +} +EXPORT_SYMBOL_GPL(drm_bridge_connector_init); diff --git a/include/drm/drm_bridge_connector.h b/include/drm/drm_bridge_connector.h new file mode 100644 index 000000000000..ec33b44954b8 --- /dev/null +++ b/include/drm/drm_bridge_connector.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2019 Laurent Pinchart + */ + +#ifndef __DRM_BRIDGE_CONNECTOR_H__ +#define __DRM_BRIDGE_CONNECTOR_H__ + +struct drm_bridge; +struct drm_connector; +struct drm_device; + +void drm_bridge_connector_enable_hpd(struct drm_connector *connector); +void drm_bridge_connector_disable_hpd(struct drm_connector *connector); +struct drm_connector *drm_bridge_connector_init(struct drm_device *drm, + struct drm_bridge *bridge); + +#endif /* __DRM_BRIDGE_CONNECTOR_H__ */