@@ -331,45 +331,6 @@ static void hdmi_disconnect(struct omap_dss_device *src,
omapdss_device_disconnect(dst, dst->next);
}
-static struct edid *hdmi_read_edid_data(struct omap_hdmi *hdmi,
- struct drm_connector *connector)
-{
- u8 *edid;
- int r;
-
- edid = kzalloc(512, GFP_KERNEL);
- if (!edid)
- return NULL;
-
- r = hdmi4_core_ddc_read(&hdmi->core, edid, 0, EDID_LENGTH);
- if (r)
- goto error;
-
- if (edid[0x7e] > 0) {
- char checksum = 0;
- unsigned int i;
-
- r = hdmi4_core_ddc_read(&hdmi->core, edid + EDID_LENGTH, 1,
- EDID_LENGTH);
- if (r)
- goto error;
-
- for (i = 0; i < EDID_LENGTH; ++i)
- checksum += edid[EDID_LENGTH + i];
-
- if (checksum != 0) {
- DSSERR("E-EDID checksum failed!!\n");
- goto error;
- }
- }
-
- return (struct edid *)edid;
-
-error:
- kfree(edid);
- return NULL;
-}
-
static struct edid *
hdmi_do_read_edid(struct omap_hdmi *hdmi,
struct edid *(*read)(struct omap_hdmi *hdmi,
@@ -419,28 +380,9 @@ hdmi_do_read_edid(struct omap_hdmi *hdmi,
return edid;
}
-static struct edid *hdmi_read_edid(struct omap_dss_device *dssdev)
-{
- return hdmi_do_read_edid(dssdev_to_hdmi(dssdev), hdmi_read_edid_data,
- NULL);
-}
-
-static void hdmi_lost_hotplug(struct omap_dss_device *dssdev)
-{
- struct omap_hdmi *hdmi = dssdev_to_hdmi(dssdev);
-
- hdmi4_cec_set_phys_addr(&hdmi->core, CEC_PHYS_ADDR_INVALID);
-}
-
static const struct omap_dss_device_ops hdmi_ops = {
.connect = hdmi_connect,
.disconnect = hdmi_disconnect,
-
- .read_edid = hdmi_read_edid,
-
- .hdmi = {
- .lost_hotplug = hdmi_lost_hotplug,
- },
};
/* -----------------------------------------------------------------------------
@@ -805,7 +747,6 @@ static int hdmi4_init_output(struct omap_hdmi *hdmi)
out->ops = &hdmi_ops;
out->owner = THIS_MODULE;
out->of_port = 0;
- out->ops_flags = OMAP_DSS_DEVICE_OP_EDID;
r = omapdss_device_init_output(out, &hdmi->bridge);
if (r < 0)
@@ -329,41 +329,6 @@ static void hdmi_disconnect(struct omap_dss_device *src,
omapdss_device_disconnect(dst, dst->next);
}
-static struct edid *hdmi_read_edid_data(struct omap_hdmi *hdmi,
- struct drm_connector *connector)
-{
- struct hdmi_core_data *core = &hdmi->core;
- int max_ext_blocks = 3;
- int r, n, i;
- u8 *edid;
-
- edid = kzalloc(512, GFP_KERNEL);
- if (!edid)
- return NULL;
-
- r = hdmi5_core_ddc_read(core, edid, 0, EDID_LENGTH);
- if (r)
- goto error;
-
- n = edid[0x7e];
-
- if (n > max_ext_blocks)
- n = max_ext_blocks;
-
- for (i = 1; i <= n; i++) {
- r = hdmi5_core_ddc_read(core, edid + i * EDID_LENGTH, i,
- EDID_LENGTH);
- if (r)
- goto error;
- }
-
- return (struct edid *)edid;
-
-error:
- kfree(edid);
- return NULL;
-}
-
static struct edid *
hdmi_do_read_edid(struct omap_hdmi *hdmi,
struct edid *(*read)(struct omap_hdmi *hdmi,
@@ -408,17 +373,9 @@ hdmi_do_read_edid(struct omap_hdmi *hdmi,
return (struct edid *)edid;
}
-static struct edid *hdmi_read_edid(struct omap_dss_device *dssdev)
-{
- return hdmi_do_read_edid(dssdev_to_hdmi(dssdev), hdmi_read_edid_data,
- NULL);
-}
-
static const struct omap_dss_device_ops hdmi_ops = {
.connect = hdmi_connect,
.disconnect = hdmi_disconnect,
-
- .read_edid = hdmi_read_edid,
};
/* -----------------------------------------------------------------------------
@@ -766,7 +723,6 @@ static int hdmi5_init_output(struct omap_hdmi *hdmi)
out->ops = &hdmi_ops;
out->owner = THIS_MODULE;
out->of_port = 0;
- out->ops_flags = OMAP_DSS_DEVICE_OP_EDID;
r = omapdss_device_init_output(out, &hdmi->bridge);
if (r < 0)
@@ -296,10 +296,6 @@ struct omap_dss_writeback_info {
u8 pre_mult_alpha;
};
-struct omapdss_hdmi_ops {
- void (*lost_hotplug)(struct omap_dss_device *dssdev);
-};
-
struct omapdss_dsi_ops {
void (*disable)(struct omap_dss_device *dssdev, bool disconnect_lanes,
bool enter_ulps);
@@ -367,36 +363,17 @@ struct omap_dss_device_ops {
void (*set_timings)(struct omap_dss_device *dssdev,
const struct drm_display_mode *mode);
- bool (*detect)(struct omap_dss_device *dssdev);
-
- void (*register_hpd_cb)(struct omap_dss_device *dssdev,
- void (*cb)(void *cb_data,
- enum drm_connector_status status),
- void *cb_data);
- void (*unregister_hpd_cb)(struct omap_dss_device *dssdev);
-
- struct edid *(*read_edid)(struct omap_dss_device *dssdev);
-
int (*get_modes)(struct omap_dss_device *dssdev,
struct drm_connector *connector);
- union {
- const struct omapdss_hdmi_ops hdmi;
- const struct omapdss_dsi_ops dsi;
- };
+ const struct omapdss_dsi_ops dsi;
};
/**
* enum omap_dss_device_ops_flag - Indicates which device ops are supported
- * @OMAP_DSS_DEVICE_OP_DETECT: The device supports output connection detection
- * @OMAP_DSS_DEVICE_OP_HPD: The device supports all hot-plug-related operations
- * @OMAP_DSS_DEVICE_OP_EDID: The device supports reading EDID
* @OMAP_DSS_DEVICE_OP_MODES: The device supports reading modes
*/
enum omap_dss_device_ops_flag {
- OMAP_DSS_DEVICE_OP_DETECT = BIT(0),
- OMAP_DSS_DEVICE_OP_HPD = BIT(1),
- OMAP_DSS_DEVICE_OP_EDID = BIT(2),
OMAP_DSS_DEVICE_OP_MODES = BIT(3),
};
@@ -30,111 +30,22 @@
struct omap_connector {
struct drm_connector base;
struct omap_dss_device *output;
- struct omap_dss_device *hpd;
};
-static void omap_connector_hpd_notify(struct drm_connector *connector,
- enum drm_connector_status status)
-{
- struct omap_connector *omap_connector = to_omap_connector(connector);
- struct omap_dss_device *dssdev;
-
- if (status != connector_status_disconnected)
- return;
-
- /*
- * Notify all devics in the pipeline of disconnection. This is required
- * to let the HDMI encoders reset their internal state related to
- * connection status, such as the CEC address.
- */
- for (dssdev = omap_connector->output; dssdev; dssdev = dssdev->next) {
- if (dssdev->ops && dssdev->ops->hdmi.lost_hotplug)
- dssdev->ops->hdmi.lost_hotplug(dssdev);
- }
-}
-
-static void omap_connector_hpd_cb(void *cb_data,
- enum drm_connector_status status)
-{
- struct omap_connector *omap_connector = cb_data;
- struct drm_connector *connector = &omap_connector->base;
- struct drm_device *dev = connector->dev;
- enum drm_connector_status old_status;
-
- mutex_lock(&dev->mode_config.mutex);
- old_status = connector->status;
- connector->status = status;
- mutex_unlock(&dev->mode_config.mutex);
-
- if (old_status == status)
- return;
-
- omap_connector_hpd_notify(connector, status);
-
- drm_kms_helper_hotplug_event(dev);
-}
-
-void omap_connector_enable_hpd(struct drm_connector *connector)
-{
- struct omap_connector *omap_connector = to_omap_connector(connector);
- struct omap_dss_device *hpd = omap_connector->hpd;
-
- if (hpd)
- hpd->ops->register_hpd_cb(hpd, omap_connector_hpd_cb,
- omap_connector);
-}
-
-void omap_connector_disable_hpd(struct drm_connector *connector)
-{
- struct omap_connector *omap_connector = to_omap_connector(connector);
- struct omap_dss_device *hpd = omap_connector->hpd;
-
- if (hpd)
- hpd->ops->unregister_hpd_cb(hpd);
-}
-
-static struct omap_dss_device *
-omap_connector_find_device(struct drm_connector *connector,
- enum omap_dss_device_ops_flag op)
-{
- struct omap_connector *omap_connector = to_omap_connector(connector);
- struct omap_dss_device *dssdev = NULL;
- struct omap_dss_device *d;
-
- for (d = omap_connector->output; d; d = d->next) {
- if (d->ops_flags & op)
- dssdev = d;
- }
-
- return dssdev;
-}
-
static enum drm_connector_status omap_connector_detect(
struct drm_connector *connector, bool force)
{
- struct omap_dss_device *dssdev;
enum drm_connector_status status;
- dssdev = omap_connector_find_device(connector,
- OMAP_DSS_DEVICE_OP_DETECT);
-
- if (dssdev) {
- status = dssdev->ops->detect(dssdev)
- ? connector_status_connected
- : connector_status_disconnected;
-
- omap_connector_hpd_notify(connector, status);
- } else {
- switch (connector->connector_type) {
- case DRM_MODE_CONNECTOR_DPI:
- case DRM_MODE_CONNECTOR_LVDS:
- case DRM_MODE_CONNECTOR_DSI:
- status = connector_status_connected;
- break;
- default:
- status = connector_status_unknown;
- break;
- }
+ switch (connector->connector_type) {
+ case DRM_MODE_CONNECTOR_DPI:
+ case DRM_MODE_CONNECTOR_LVDS:
+ case DRM_MODE_CONNECTOR_DSI:
+ status = connector_status_connected;
+ break;
+ default:
+ status = connector_status_unknown;
+ break;
}
VERB("%s: %d (force=%d)", connector->name, status, force);
@@ -148,14 +59,6 @@ static void omap_connector_destroy(struct drm_connector *connector)
DBG("%s", connector->name);
- if (omap_connector->hpd) {
- struct omap_dss_device *hpd = omap_connector->hpd;
-
- hpd->ops->unregister_hpd_cb(hpd);
- omapdss_device_put(hpd);
- omap_connector->hpd = NULL;
- }
-
drm_connector_unregister(connector);
drm_connector_cleanup(connector);
@@ -164,63 +67,27 @@ static void omap_connector_destroy(struct drm_connector *connector)
kfree(omap_connector);
}
-static int omap_connector_get_modes_edid(struct drm_connector *connector,
- struct omap_dss_device *dssdev)
-{
- enum drm_connector_status status;
- struct edid *edid;
- int n;
-
- status = omap_connector_detect(connector, false);
- if (status != connector_status_connected)
- goto no_edid;
-
- edid = dssdev->ops->read_edid(dssdev);
- if (!edid || !drm_edid_is_valid(edid)) {
- kfree(edid);
- goto no_edid;
- }
-
- drm_connector_update_edid_property(connector, edid);
- n = drm_add_edid_modes(connector, edid);
-
- kfree(edid);
- return n;
-
-no_edid:
- drm_connector_update_edid_property(connector, NULL);
- return 0;
-}
-
static int omap_connector_get_modes(struct drm_connector *connector)
{
- struct omap_dss_device *dssdev;
+ struct omap_connector *omap_connector = to_omap_connector(connector);
+ struct omap_dss_device *dssdev = NULL;
+ struct omap_dss_device *d;
DBG("%s", connector->name);
/*
- * If display exposes EDID, then we parse that in the normal way to
- * build table of supported modes.
+ * If the display pipeline reports modes (e.g. with a fixed resolution
+ * panel or an analog TV output), query it.
*/
- dssdev = omap_connector_find_device(connector,
- OMAP_DSS_DEVICE_OP_EDID);
- if (dssdev)
- return omap_connector_get_modes_edid(connector, dssdev);
+ for (d = omap_connector->output; d; d = d->next) {
+ if (d->ops_flags & OMAP_DSS_DEVICE_OP_MODES)
+ dssdev = d;
+ }
- /*
- * Otherwise if the display pipeline reports modes (e.g. with a fixed
- * resolution panel or an analog TV output), query it.
- */
- dssdev = omap_connector_find_device(connector,
- OMAP_DSS_DEVICE_OP_MODES);
if (dssdev)
return dssdev->ops->get_modes(dssdev, connector);
- /*
- * We can't retrieve modes, which can happen for instance for a DVI or
- * VGA output with the DDC bus unconnected. The KMS core will add the
- * default modes.
- */
+ /* We can't retrieve modes. The KMS core will add the default modes. */
return 0;
}
@@ -301,7 +168,6 @@ struct drm_connector *omap_connector_init(struct drm_device *dev,
{
struct drm_connector *connector = NULL;
struct omap_connector *omap_connector;
- struct omap_dss_device *dssdev;
DBG("%s", output->name);
@@ -319,24 +185,6 @@ struct drm_connector *omap_connector_init(struct drm_device *dev,
omap_connector_get_type(output));
drm_connector_helper_add(connector, &omap_connector_helper_funcs);
- /*
- * Initialize connector status handling. First try to find a device that
- * supports hot-plug reporting. If it fails, fall back to a device that
- * support polling. If that fails too, we don't support hot-plug
- * detection at all.
- */
- dssdev = omap_connector_find_device(connector, OMAP_DSS_DEVICE_OP_HPD);
- if (dssdev) {
- omap_connector->hpd = omapdss_device_get(dssdev);
- connector->polled = DRM_CONNECTOR_POLL_HPD;
- } else {
- dssdev = omap_connector_find_device(connector,
- OMAP_DSS_DEVICE_OP_DETECT);
- if (dssdev)
- connector->polled = DRM_CONNECTOR_POLL_CONNECT |
- DRM_CONNECTOR_POLL_DISCONNECT;
- }
-
return connector;
fail:
@@ -32,8 +32,6 @@ struct omap_dss_device;
struct drm_connector *omap_connector_init(struct drm_device *dev,
struct omap_dss_device *output,
struct drm_encoder *encoder);
-void omap_connector_enable_hpd(struct drm_connector *connector);
-void omap_connector_disable_hpd(struct drm_connector *connector);
enum drm_mode_status omap_connector_mode_fixup(struct omap_dss_device *dssdev,
const struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode);
@@ -434,9 +434,7 @@ static void omap_modeset_enable_external_hpd(struct drm_device *ddev)
if (!connector)
continue;
- if (priv->pipes[i].output->next)
- omap_connector_enable_hpd(connector);
- else
+ if (priv->pipes[i].output->bridge)
drm_bridge_connector_enable_hpd(connector);
}
}
@@ -455,9 +453,7 @@ static void omap_modeset_disable_external_hpd(struct drm_device *ddev)
if (!connector)
continue;
- if (priv->pipes[i].output->next)
- omap_connector_disable_hpd(connector);
- else
+ if (priv->pipes[i].output->bridge)
drm_bridge_connector_disable_hpd(connector);
}
}
Due to the removal of several omapdrm display drivers, the omapdss HPD, detected and EDID operations are not used anymore. Remove them and all related code. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- drivers/gpu/drm/omapdrm/dss/hdmi4.c | 59 ------- drivers/gpu/drm/omapdrm/dss/hdmi5.c | 44 ------ drivers/gpu/drm/omapdrm/dss/omapdss.h | 25 +-- drivers/gpu/drm/omapdrm/omap_connector.c | 190 +++-------------------- drivers/gpu/drm/omapdrm/omap_connector.h | 2 - drivers/gpu/drm/omapdrm/omap_drv.c | 8 +- 6 files changed, 22 insertions(+), 306 deletions(-)