diff mbox series

[v3,4/4] backlight: pwm_bl: Set scale type for brightness curves specified in the DT

Message ID 20190709190007.91260-5-mka@chromium.org (mailing list archive)
State New, archived
Headers show
Series backlight: Expose brightness curve type through sysfs | expand

Commit Message

Matthias Kaehlcke July 9, 2019, 7 p.m. UTC
Check if a brightness curve specified in the device tree is linear or
not and set the corresponding property accordingly. This makes the
scale type available to userspace via the 'scale' sysfs attribute.

To determine if a curve is linear it is compared to a interpolated linear
curve between min and max brightness. The curve is considered linear if
no value deviates more than +/-5% of ${brightness_range} from their
interpolated value.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
---
Changes in v3:
- none

Changes in v2:
- use 128 (power of two) instead of 100 as factor for the slope
- add comment about max quantization error
- added Daniel's 'Acked-by' tag
---
 drivers/video/backlight/pwm_bl.c | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

Comments

Lee Jones Sept. 2, 2019, 9:42 a.m. UTC | #1
On Tue, 09 Jul 2019, Matthias Kaehlcke wrote:

> Check if a brightness curve specified in the device tree is linear or
> not and set the corresponding property accordingly. This makes the
> scale type available to userspace via the 'scale' sysfs attribute.
> 
> To determine if a curve is linear it is compared to a interpolated linear
> curve between min and max brightness. The curve is considered linear if
> no value deviates more than +/-5% of ${brightness_range} from their
> interpolated value.
> 
> Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
> Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
> ---
> Changes in v3:
> - none
> 
> Changes in v2:
> - use 128 (power of two) instead of 100 as factor for the slope
> - add comment about max quantization error
> - added Daniel's 'Acked-by' tag
> ---
>  drivers/video/backlight/pwm_bl.c | 30 ++++++++++++++++++++++++++++++
>  1 file changed, 30 insertions(+)

Applied, thanks.
diff mbox series

Patch

diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
index 7c6dfc4a601d..fef98beb8b7e 100644
--- a/drivers/video/backlight/pwm_bl.c
+++ b/drivers/video/backlight/pwm_bl.c
@@ -404,6 +404,31 @@  int pwm_backlight_brightness_default(struct device *dev,
 }
 #endif
 
+static bool pwm_backlight_is_linear(struct platform_pwm_backlight_data *data)
+{
+	unsigned int nlevels = data->max_brightness + 1;
+	unsigned int min_val = data->levels[0];
+	unsigned int max_val = data->levels[nlevels - 1];
+	/*
+	 * Multiplying by 128 means that even in pathological cases such
+	 * as (max_val - min_val) == nlevels the error at max_val is less
+	 * than 1%.
+	 */
+	unsigned int slope = (128 * (max_val - min_val)) / nlevels;
+	unsigned int margin = (max_val - min_val) / 20; /* 5% */
+	int i;
+
+	for (i = 1; i < nlevels; i++) {
+		unsigned int linear_value = min_val + ((i * slope) / 128);
+		unsigned int delta = abs(linear_value - data->levels[i]);
+
+		if (delta > margin)
+			return false;
+	}
+
+	return true;
+}
+
 static int pwm_backlight_initial_power_state(const struct pwm_bl_data *pb)
 {
 	struct device_node *node = pb->dev->of_node;
@@ -567,6 +592,11 @@  static int pwm_backlight_probe(struct platform_device *pdev)
 
 			pb->levels = data->levels;
 		}
+
+		if (pwm_backlight_is_linear(data))
+			props.scale = BACKLIGHT_SCALE_LINEAR;
+		else
+			props.scale = BACKLIGHT_SCALE_NON_LINEAR;
 	} else if (!data->max_brightness) {
 		/*
 		 * If no brightness levels are provided and max_brightness is