| Message ID | 20190710021659.177950-3-dbasehore@chromium.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Panel rotation patches | expand |
Hi Derek. On Tue, Jul 09, 2019 at 07:16:57PM -0700, Derek Basehore wrote: > Devicetree systems can set panel orientation via a panel binding, but > there's no way, as is, to propagate this setting to the connector, > where the property need to be added. > To address this, this patch sets orientation, as well as other fixed > values for the panel, in the drm_panel_attach function. These values > are stored from probe in the drm_panel struct. This approch seems to conflict with work done by Laurent where the ownership/creation of the connector will be moved to the display controller. If I understand it correct then there should not be a 1:1 relation between a panel and a connector anymore. We should not try to work in two different directions with this. Laurent, can you comment on this? If we move forard with this patch, then all fields in drm_panel needs kernel-doc - preferably inline. Sam > > Signed-off-by: Derek Basehore <dbasehore@chromium.org> > --- > drivers/gpu/drm/drm_panel.c | 28 ++++++++++++++++++++++++++++ > include/drm/drm_panel.h | 14 ++++++++++++++ > 2 files changed, 42 insertions(+) > > diff --git a/drivers/gpu/drm/drm_panel.c b/drivers/gpu/drm/drm_panel.c > index 169bab54d52d..ca01095470a9 100644 > --- a/drivers/gpu/drm/drm_panel.c > +++ b/drivers/gpu/drm/drm_panel.c > @@ -104,11 +104,23 @@ EXPORT_SYMBOL(drm_panel_remove); > */ > int drm_panel_attach(struct drm_panel *panel, struct drm_connector *connector) > { > + struct drm_display_info *info; > + > if (panel->connector) > return -EBUSY; > > panel->connector = connector; > panel->drm = connector->dev; > + info = &connector->display_info; > + info->width_mm = panel->width_mm; > + info->height_mm = panel->height_mm; > + info->bpc = panel->bpc; > + info->panel_orientation = panel->orientation; > + info->bus_flags = panel->bus_flags; > + if (panel->bus_formats) > + drm_display_info_set_bus_formats(&connector->display_info, > + panel->bus_formats, > + panel->num_bus_formats); > > return 0; > } > @@ -128,6 +140,22 @@ EXPORT_SYMBOL(drm_panel_attach); > */ > int drm_panel_detach(struct drm_panel *panel) > { > + struct drm_display_info *info; > + > + if (!panel->connector) > + goto out; > + > + info = &panel->connector->display_info; > + info->width_mm = 0; > + info->height_mm = 0; > + info->bpc = 0; > + info->panel_orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN; > + info->bus_flags = 0; > + kfree(info->bus_formats); > + info->bus_formats = NULL; > + info->num_bus_formats = 0; > + > +out: > panel->connector = NULL; > panel->drm = NULL; > > diff --git a/include/drm/drm_panel.h b/include/drm/drm_panel.h > index fc7da55f41d9..a6a881b987dd 100644 > --- a/include/drm/drm_panel.h > +++ b/include/drm/drm_panel.h > @@ -39,6 +39,8 @@ enum drm_panel_orientation; > * struct drm_panel_funcs - perform operations on a given panel > * @disable: disable panel (turn off back light, etc.) > * @unprepare: turn off panel > + * @detach: detach panel->connector (clear internal state, etc.) > + * @attach: attach panel->connector (update internal state, etc.) > * @prepare: turn on panel and perform set up > * @enable: enable panel (turn on back light, etc.) > * @get_modes: add modes to the connector that the panel is attached to and > @@ -95,6 +97,18 @@ struct drm_panel { > > const struct drm_panel_funcs *funcs; > > + /* > + * panel information to be set in the connector when the panel is > + * attached. > + */ > + unsigned int width_mm; > + unsigned int height_mm; > + unsigned int bpc; > + int orientation; > + const u32 *bus_formats; > + unsigned int num_bus_formats; > + u32 bus_flags; > + > struct list_head list; > }; > > -- > 2.22.0.410.gd8fdbe21b5-goog > > _______________________________________________ > dri-devel mailing list > dri-devel@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/dri-devel
Hi Sam, thanks for pointing out the potential conflict. On Tue, Jul 23, 2019 at 2:19 AM Sam Ravnborg <sam@ravnborg.org> wrote: > > Hi Derek. > > On Tue, Jul 09, 2019 at 07:16:57PM -0700, Derek Basehore wrote: > > Devicetree systems can set panel orientation via a panel binding, but > > there's no way, as is, to propagate this setting to the connector, > > where the property need to be added. > > To address this, this patch sets orientation, as well as other fixed > > values for the panel, in the drm_panel_attach function. These values > > are stored from probe in the drm_panel struct. > > This approch seems to conflict with work done by Laurent where the > ownership/creation of the connector will be moved to the display controller. > > If I understand it correct then there should not be a 1:1 relation > between a panel and a connector anymore. Can you point me to this work? I still see the lone drm_display_info struct in the drm_connector struct. This seems to indicate that the kernel still assume one display per connector. > > We should not try to work in two different directions with this. > Laurent, can you comment on this? > > If we move forard with this patch, then all fields in drm_panel needs > kernel-doc - preferably inline. > > Sam > > > > > Signed-off-by: Derek Basehore <dbasehore@chromium.org> > > --- > > drivers/gpu/drm/drm_panel.c | 28 ++++++++++++++++++++++++++++ > > include/drm/drm_panel.h | 14 ++++++++++++++ > > 2 files changed, 42 insertions(+) > > > > diff --git a/drivers/gpu/drm/drm_panel.c b/drivers/gpu/drm/drm_panel.c > > index 169bab54d52d..ca01095470a9 100644 > > --- a/drivers/gpu/drm/drm_panel.c > > +++ b/drivers/gpu/drm/drm_panel.c > > @@ -104,11 +104,23 @@ EXPORT_SYMBOL(drm_panel_remove); > > */ > > int drm_panel_attach(struct drm_panel *panel, struct drm_connector *connector) > > { > > + struct drm_display_info *info; > > + > > if (panel->connector) > > return -EBUSY; > > > > panel->connector = connector; > > panel->drm = connector->dev; > > + info = &connector->display_info; > > + info->width_mm = panel->width_mm; > > + info->height_mm = panel->height_mm; > > + info->bpc = panel->bpc; > > + info->panel_orientation = panel->orientation; > > + info->bus_flags = panel->bus_flags; > > + if (panel->bus_formats) > > + drm_display_info_set_bus_formats(&connector->display_info, > > + panel->bus_formats, > > + panel->num_bus_formats); > > > > return 0; > > } > > @@ -128,6 +140,22 @@ EXPORT_SYMBOL(drm_panel_attach); > > */ > > int drm_panel_detach(struct drm_panel *panel) > > { > > + struct drm_display_info *info; > > + > > + if (!panel->connector) > > + goto out; > > + > > + info = &panel->connector->display_info; > > + info->width_mm = 0; > > + info->height_mm = 0; > > + info->bpc = 0; > > + info->panel_orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN; > > + info->bus_flags = 0; > > + kfree(info->bus_formats); > > + info->bus_formats = NULL; > > + info->num_bus_formats = 0; > > + > > +out: > > panel->connector = NULL; > > panel->drm = NULL; > > > > diff --git a/include/drm/drm_panel.h b/include/drm/drm_panel.h > > index fc7da55f41d9..a6a881b987dd 100644 > > --- a/include/drm/drm_panel.h > > +++ b/include/drm/drm_panel.h > > @@ -39,6 +39,8 @@ enum drm_panel_orientation; > > * struct drm_panel_funcs - perform operations on a given panel > > * @disable: disable panel (turn off back light, etc.) > > * @unprepare: turn off panel > > + * @detach: detach panel->connector (clear internal state, etc.) > > + * @attach: attach panel->connector (update internal state, etc.) > > * @prepare: turn on panel and perform set up > > * @enable: enable panel (turn on back light, etc.) > > * @get_modes: add modes to the connector that the panel is attached to and > > @@ -95,6 +97,18 @@ struct drm_panel { > > > > const struct drm_panel_funcs *funcs; > > > > + /* > > + * panel information to be set in the connector when the panel is > > + * attached. > > + */ > > + unsigned int width_mm; > > + unsigned int height_mm; > > + unsigned int bpc; > > + int orientation; > > + const u32 *bus_formats; > > + unsigned int num_bus_formats; > > + u32 bus_flags; > > + > > struct list_head list; > > }; > > > > -- > > 2.22.0.410.gd8fdbe21b5-goog > > > > _______________________________________________ > > dri-devel mailing list > > dri-devel@lists.freedesktop.org > > https://lists.freedesktop.org/mailman/listinfo/dri-devel
Hi Derek. On Wed, Jul 24, 2019 at 03:15:19PM -0700, dbasehore . wrote: > Hi Sam, thanks for pointing out the potential conflict. > > On Tue, Jul 23, 2019 at 2:19 AM Sam Ravnborg <sam@ravnborg.org> wrote: > > > > Hi Derek. > > > > On Tue, Jul 09, 2019 at 07:16:57PM -0700, Derek Basehore wrote: > > > Devicetree systems can set panel orientation via a panel binding, but > > > there's no way, as is, to propagate this setting to the connector, > > > where the property need to be added. > > > To address this, this patch sets orientation, as well as other fixed > > > values for the panel, in the drm_panel_attach function. These values > > > are stored from probe in the drm_panel struct. > > > > This approch seems to conflict with work done by Laurent where the > > ownership/creation of the connector will be moved to the display controller. > > > > If I understand it correct then there should not be a 1:1 relation > > between a panel and a connector anymore. > > > Can you point me to this work? Please take a look at the series with subject: "[PATCH 00/60] drm/omap: Replace custom display drivers with drm_bridge and drm_panel" Link: https://patchwork.kernel.org/cover/11034175/ Laurent has done a great job explaining the background, If you look into the patched you will see the idea is that a drm_panel no longer get attached to a drm_controller - it will be an argument to get_modes(). Sam
diff --git a/drivers/gpu/drm/drm_panel.c b/drivers/gpu/drm/drm_panel.c index 169bab54d52d..ca01095470a9 100644 --- a/drivers/gpu/drm/drm_panel.c +++ b/drivers/gpu/drm/drm_panel.c @@ -104,11 +104,23 @@ EXPORT_SYMBOL(drm_panel_remove); */ int drm_panel_attach(struct drm_panel *panel, struct drm_connector *connector) { + struct drm_display_info *info; + if (panel->connector) return -EBUSY; panel->connector = connector; panel->drm = connector->dev; + info = &connector->display_info; + info->width_mm = panel->width_mm; + info->height_mm = panel->height_mm; + info->bpc = panel->bpc; + info->panel_orientation = panel->orientation; + info->bus_flags = panel->bus_flags; + if (panel->bus_formats) + drm_display_info_set_bus_formats(&connector->display_info, + panel->bus_formats, + panel->num_bus_formats); return 0; } @@ -128,6 +140,22 @@ EXPORT_SYMBOL(drm_panel_attach); */ int drm_panel_detach(struct drm_panel *panel) { + struct drm_display_info *info; + + if (!panel->connector) + goto out; + + info = &panel->connector->display_info; + info->width_mm = 0; + info->height_mm = 0; + info->bpc = 0; + info->panel_orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN; + info->bus_flags = 0; + kfree(info->bus_formats); + info->bus_formats = NULL; + info->num_bus_formats = 0; + +out: panel->connector = NULL; panel->drm = NULL; diff --git a/include/drm/drm_panel.h b/include/drm/drm_panel.h index fc7da55f41d9..a6a881b987dd 100644 --- a/include/drm/drm_panel.h +++ b/include/drm/drm_panel.h @@ -39,6 +39,8 @@ enum drm_panel_orientation; * struct drm_panel_funcs - perform operations on a given panel * @disable: disable panel (turn off back light, etc.) * @unprepare: turn off panel + * @detach: detach panel->connector (clear internal state, etc.) + * @attach: attach panel->connector (update internal state, etc.) * @prepare: turn on panel and perform set up * @enable: enable panel (turn on back light, etc.) * @get_modes: add modes to the connector that the panel is attached to and @@ -95,6 +97,18 @@ struct drm_panel { const struct drm_panel_funcs *funcs; + /* + * panel information to be set in the connector when the panel is + * attached. + */ + unsigned int width_mm; + unsigned int height_mm; + unsigned int bpc; + int orientation; + const u32 *bus_formats; + unsigned int num_bus_formats; + u32 bus_flags; + struct list_head list; };
Devicetree systems can set panel orientation via a panel binding, but there's no way, as is, to propagate this setting to the connector, where the property need to be added. To address this, this patch sets orientation, as well as other fixed values for the panel, in the drm_panel_attach function. These values are stored from probe in the drm_panel struct. Signed-off-by: Derek Basehore <dbasehore@chromium.org> --- drivers/gpu/drm/drm_panel.c | 28 ++++++++++++++++++++++++++++ include/drm/drm_panel.h | 14 ++++++++++++++ 2 files changed, 42 insertions(+)