@@ -49,6 +49,10 @@ static int dw_hdmi_i2s_hw_params(struct device *dev, void *data,
return -EINVAL;
}
+ /* Reset the FIFOs before applying new params */
+ hdmi_write(audio, HDMI_AUD_CONF0_SW_RESET, HDMI_AUD_CONF0);
+ hdmi_write(audio, (u8)~HDMI_MC_SWRSTZ_I2SSWRST_REQ, HDMI_MC_SWRSTZ);
+
inputclkfs = HDMI_AUD_INPUTCLKFS_64FS;
conf0 = HDMI_AUD_CONF0_I2S_ALL_ENABLE;
@@ -102,8 +106,6 @@ static void dw_hdmi_i2s_audio_shutdown(struct device *dev, void *data)
struct dw_hdmi *hdmi = audio->hdmi;
dw_hdmi_audio_disable(hdmi);
-
- hdmi_write(audio, HDMI_AUD_CONF0_SW_RESET, HDMI_AUD_CONF0);
}
static int dw_hdmi_i2s_get_dai_id(struct snd_soc_component *component,
@@ -940,6 +940,7 @@ enum {
HDMI_MC_CLKDIS_PIXELCLK_DISABLE = 0x1,
/* MC_SWRSTZ field values */
+ HDMI_MC_SWRSTZ_I2SSWRST_REQ = 0x08,
HDMI_MC_SWRSTZ_TMDSSWRST_REQ = 0x02,
/* MC_FLOWCTRL field values */
When changing the audio hw params, reset the audio fifo to make sure any old remaining data is flushed. The databook mentions that such reset should be followed by a reset of the i2s block to make sure the samples stay aligned Cc: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> --- drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c | 6 ++++-- drivers/gpu/drm/bridge/synopsys/dw-hdmi.h | 1 + 2 files changed, 5 insertions(+), 2 deletions(-)