@@ -8,7 +8,13 @@
/include/ "nspire.dtsi"
&lcd {
- lcd-type = "classic";
+ port {
+ clcd_pads: endpoint {
+ remote-endpoint = <&panel_in>;
+ /* Dummy values, since we are grayscale */
+ arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+ };
+ };
};
&fast_timer {
@@ -69,6 +75,15 @@
#interrupt-cells = <1>;
};
};
+
+ panel {
+ compatible = "ti,nspire-classic-lcd-panel";
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&clcd_pads>;
+ };
+ };
+ };
chosen {
bootargs = "debug earlyprintk console=tty0 console=ttyS0,115200n8 root=/dev/ram0";
};
@@ -9,7 +9,12 @@
/include/ "nspire.dtsi"
&lcd {
- lcd-type = "cx";
+ port {
+ clcd_pads: endpoint {
+ remote-endpoint = <&panel_in>;
+ arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+ };
+ };
};
&fast_timer {
@@ -106,6 +111,15 @@
};
};
};
+
+ panel {
+ compatible = "ti,nspire-cx-lcd-panel";
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&clcd_pads>;
+ };
+ };
+ };
chosen {
bootargs = "debug earlyprintk console=tty0 console=ttyAMA0,115200n8 root=/dev/ram0";
};
@@ -95,8 +95,14 @@
reg = <0xC0000000 0x1000>;
interrupts = <21>;
- clocks = <&apb_pclk>;
- clock-names = "apb_pclk";
+ /*
+ * We assume the same clock is fed to APB and CLCDCLK.
+ * There is some code to scale the clock down by a factor
+ * 48 for the display so likely the frequency to the
+ * display is 1MHz and the CLCDCLK is 48 MHz.
+ */
+ clocks = <&apb_pclk>, <&apb_pclk>;
+ clock-names = "clcdclk", "apb_pclk";
};
adc: adc@C4000000 {
@@ -1,3 +1,2 @@
# SPDX-License-Identifier: GPL-2.0-only
obj-y += nspire.o
-obj-y += clcd.o
deleted file mode 100644
@@ -1,114 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-nspire/clcd.c
- *
- * Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
- */
-
-#include <linux/init.h>
-#include <linux/of.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/clcd.h>
-#include <linux/dma-mapping.h>
-
-static struct clcd_panel nspire_cx_lcd_panel = {
- .mode = {
- .name = "Color LCD",
- .refresh = 60,
- .xres = 320,
- .yres = 240,
- .sync = 0,
- .vmode = FB_VMODE_NONINTERLACED,
- .pixclock = 1,
- .hsync_len = 6,
- .vsync_len = 1,
- .right_margin = 50,
- .left_margin = 38,
- .lower_margin = 3,
- .upper_margin = 17,
- },
- .width = 65, /* ~6.50 cm */
- .height = 49, /* ~4.87 cm */
- .tim2 = TIM2_IPC,
- .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
- .bpp = 16,
- .caps = CLCD_CAP_565,
-};
-
-static struct clcd_panel nspire_classic_lcd_panel = {
- .mode = {
- .name = "Grayscale LCD",
- .refresh = 60,
- .xres = 320,
- .yres = 240,
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
- .vmode = FB_VMODE_NONINTERLACED,
- .pixclock = 1,
- .hsync_len = 6,
- .vsync_len = 1,
- .right_margin = 6,
- .left_margin = 6,
- },
- .width = 71, /* 7.11cm */
- .height = 53, /* 5.33cm */
- .tim2 = 0x80007d0,
- .cntl = CNTL_LCDMONO8,
- .bpp = 8,
- .grayscale = 1,
- .caps = CLCD_CAP_5551,
-};
-
-int nspire_clcd_setup(struct clcd_fb *fb)
-{
- struct clcd_panel *panel;
- size_t panel_size;
- const char *type;
- dma_addr_t dma;
- int err;
-
- BUG_ON(!fb->dev->dev.of_node);
-
- err = of_property_read_string(fb->dev->dev.of_node, "lcd-type", &type);
- if (err) {
- pr_err("CLCD: Could not find lcd-type property\n");
- return err;
- }
-
- if (!strcmp(type, "cx")) {
- panel = &nspire_cx_lcd_panel;
- } else if (!strcmp(type, "classic")) {
- panel = &nspire_classic_lcd_panel;
- } else {
- pr_err("CLCD: Unknown lcd-type %s\n", type);
- return -EINVAL;
- }
-
- panel_size = ((panel->mode.xres * panel->mode.yres) * panel->bpp) / 8;
- panel_size = ALIGN(panel_size, PAGE_SIZE);
-
- fb->fb.screen_base = dma_alloc_wc(&fb->dev->dev, panel_size, &dma,
- GFP_KERNEL);
-
- if (!fb->fb.screen_base) {
- pr_err("CLCD: unable to map framebuffer\n");
- return -ENOMEM;
- }
-
- fb->fb.fix.smem_start = dma;
- fb->fb.fix.smem_len = panel_size;
- fb->panel = panel;
-
- return 0;
-}
-
-int nspire_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
-{
- return dma_mmap_wc(&fb->dev->dev, vma, fb->fb.screen_base,
- fb->fb.fix.smem_start, fb->fb.fix.smem_len);
-}
-
-void nspire_clcd_remove(struct clcd_fb *fb)
-{
- dma_free_wc(&fb->dev->dev, fb->fb.fix.smem_len, fb->fb.screen_base,
- fb->fb.fix.smem_start);
-}
deleted file mode 100644
@@ -1,10 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/arm/mach-nspire/clcd.h
- *
- * Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
- */
-
-int nspire_clcd_setup(struct clcd_fb *fb);
-int nspire_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma);
-void nspire_clcd_remove(struct clcd_fb *fb);
@@ -12,14 +12,12 @@
#include <linux/irqchip/arm-vic.h>
#include <linux/clkdev.h>
#include <linux/amba/bus.h>
-#include <linux/amba/clcd.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
#include "mmio.h"
-#include "clcd.h"
static const char *const nspire_dt_match[] __initconst = {
"ti,nspire",
@@ -29,28 +27,6 @@ static const char *const nspire_dt_match[] __initconst = {
NULL,
};
-static struct clcd_board nspire_clcd_data = {
- .name = "LCD",
- .caps = CLCD_CAP_5551 | CLCD_CAP_565,
- .check = clcdfb_check,
- .decode = clcdfb_decode,
- .setup = nspire_clcd_setup,
- .mmap = nspire_clcd_mmap,
- .remove = nspire_clcd_remove,
-};
-
-
-static struct of_dev_auxdata nspire_auxdata[] __initdata = {
- OF_DEV_AUXDATA("arm,pl111", NSPIRE_LCD_PHYS_BASE,
- NULL, &nspire_clcd_data),
- { }
-};
-
-static void __init nspire_init(void)
-{
- of_platform_default_populate(NULL, nspire_auxdata, NULL);
-}
-
static void nspire_restart(enum reboot_mode mode, const char *cmd)
{
void __iomem *base = ioremap(NSPIRE_MISC_PHYS_BASE, SZ_4K);
@@ -62,6 +38,5 @@ static void nspire_restart(enum reboot_mode mode, const char *cmd)
DT_MACHINE_START(NSPIRE, "TI-NSPIRE")
.dt_compat = nspire_dt_match,
- .init_machine = nspire_init,
.restart = nspire_restart,
MACHINE_END