diff mbox series

[v4,01/25] drm: kirin: Fix for hikey620 display offset problem

Message ID 20190819230321.56480-2-john.stultz@linaro.org (mailing list archive)
State New, archived
Headers show
Series drm: Kirin driver cleanups to prep for Kirin960 support | expand

Commit Message

John Stultz Aug. 19, 2019, 11:02 p.m. UTC
From: Da Lv <lvda3@hisilicon.com>

The original HiKey (620) board has had a long running issue
where when using a 1080p montior, the display would occasionally
blink and come come back with a horizontal offset (usually also
shifting the colors, depending on the value of the offset%4).

After lots of analysis by HiSi developers, they found the issue
was due to when running at 1080p, it was possible to hit the
device memory bandwidth limits, which could cause the DSI signal
to get out of sync.

Unfortunately the DSI logic doesn't have the ability to
automatically recover from this situation, but we can get a an
LDI underflow interrupt when it happens.

To then correct the issue, when we get an LDI underflow irq, we
we can simply suspend and resume the display, which resets the
hardware.

Thus, this patch enables the ldi underflow interrupt, and
initializes a workqueue that is used to suspend/resume the
display to recover. Then when the irq occurs we clear it and
schedule the workqueue to reset display engine.

Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Da Lv <lvda3@hisilicon.com>
Signed-off-by: Yidong Lin <linyidong@huawei.com>
[jstultz: Reworded the commit message, checkpatch cleanups]
Signed-off-by: John Stultz <john.stultz@linaro.org>
---
v2: Minor cleanups

v3: Rename workqueue entry for clarity (suggested by Sam)
---
 .../gpu/drm/hisilicon/kirin/kirin_ade_reg.h   |  1 +
 .../gpu/drm/hisilicon/kirin/kirin_drm_ade.c   | 22 +++++++++++++++++++
 2 files changed, 23 insertions(+)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/hisilicon/kirin/kirin_ade_reg.h b/drivers/gpu/drm/hisilicon/kirin/kirin_ade_reg.h
index e2ac09894a6d..0da860200410 100644
--- a/drivers/gpu/drm/hisilicon/kirin/kirin_ade_reg.h
+++ b/drivers/gpu/drm/hisilicon/kirin/kirin_ade_reg.h
@@ -83,6 +83,7 @@ 
 #define VSIZE_OFST			20
 #define LDI_INT_EN			0x741C
 #define FRAME_END_INT_EN_OFST		1
+#define UNDERFLOW_INT_EN_OFST		2
 #define LDI_CTRL			0x7420
 #define BPP_OFST			3
 #define DATA_GATE_EN			BIT(2)
diff --git a/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c b/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c
index 0df1afdf319d..d972342527b8 100644
--- a/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c
+++ b/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c
@@ -58,6 +58,7 @@  struct ade_hw_ctx {
 struct ade_crtc {
 	struct drm_crtc base;
 	struct ade_hw_ctx *ctx;
+	struct work_struct display_reset_wq;
 	bool enable;
 	u32 out_format;
 };
@@ -176,6 +177,7 @@  static void ade_init(struct ade_hw_ctx *ctx)
 	 */
 	ade_update_bits(base + ADE_CTRL, FRM_END_START_OFST,
 			FRM_END_START_MASK, REG_EFFECTIVE_IN_ADEEN_FRMEND);
+	ade_update_bits(base + LDI_INT_EN, UNDERFLOW_INT_EN_OFST, MASK(1), 1);
 }
 
 static bool ade_crtc_mode_fixup(struct drm_crtc *crtc,
@@ -345,6 +347,17 @@  static void ade_crtc_disable_vblank(struct drm_crtc *crtc)
 			MASK(1), 0);
 }
 
+static void drm_underflow_wq(struct work_struct *work)
+{
+	struct ade_crtc *acrtc = container_of(work, struct ade_crtc,
+					      display_reset_wq);
+	struct drm_device *drm_dev = (&acrtc->base)->dev;
+	struct drm_atomic_state *state;
+
+	state = drm_atomic_helper_suspend(drm_dev);
+	drm_atomic_helper_resume(drm_dev, state);
+}
+
 static irqreturn_t ade_irq_handler(int irq, void *data)
 {
 	struct ade_crtc *acrtc = data;
@@ -362,6 +375,12 @@  static irqreturn_t ade_irq_handler(int irq, void *data)
 				MASK(1), 1);
 		drm_crtc_handle_vblank(crtc);
 	}
+	if (status & BIT(UNDERFLOW_INT_EN_OFST)) {
+		ade_update_bits(base + LDI_INT_CLR, UNDERFLOW_INT_EN_OFST,
+				MASK(1), 1);
+		DRM_ERROR("LDI underflow!");
+		schedule_work(&acrtc->display_reset_wq);
+	}
 
 	return IRQ_HANDLED;
 }
@@ -1038,6 +1057,9 @@  static int ade_drm_init(struct platform_device *pdev)
 	/* vblank irq init */
 	ret = devm_request_irq(dev->dev, ctx->irq, ade_irq_handler,
 			       IRQF_SHARED, dev->driver->name, acrtc);
+
+	INIT_WORK(&acrtc->display_reset_wq, drm_underflow_wq);
+
 	if (ret)
 		return ret;