@@ -138,7 +138,7 @@ static int innolux_panel_prepare(struct drm_panel *panel)
if (!innolux->enable_gpio[i])
break;
- /* p079zca: t2 (20ms), p097pfg: t4 (15ms) */
+ /* p079zca: t2 (20ms), p097pfg: t4 (15ms); ssd2858: 20ms */
usleep_range(20000, 21000);
gpiod_set_value_cansleep(innolux->enable_gpio[i], 1);
}
@@ -162,6 +162,18 @@ static int innolux_panel_prepare(struct drm_panel *panel)
goto poweroff;
}
+ /*
+ * If the command list contains exit sleep mode or set
+ * display on, wait the appropriate time (needed for
+ * displays behind a bridge).
+ */
+ /* T6: 120ms - 1000ms*/
+ if (cmd->data[0] == MIPI_DCS_EXIT_SLEEP_MODE)
+ msleep(120);
+ /* T7: 5ms */
+ if (cmd->data[0] == MIPI_DCS_SET_DISPLAY_ON)
+ usleep_range(5000, 6000);
+
/*
* Included by random guessing, because without this
* (or at least, some delay), the panel sometimes
@@ -410,6 +422,92 @@ static const struct panel_desc innolux_p097pfg_panel_desc = {
.sleep_mode_delay = 100, /* T15 */
};
+static const char * const innolux_p097pfg_ssd2858_supply_names[] = {
+ "avdd",
+ "avee",
+ "pp1800",
+ "pp3300",
+ "pp1200-bridge",
+ "vddio-bridge",
+};
+
+static const struct drm_display_mode innolux_p097pfg_ssd2858_mode = {
+ .clock = 211660,
+ .hdisplay = 1536,
+ .hsync_start = 1536 + 140,
+ .hsync_end = 1536 + 140 + 10,
+ .htotal = 1536 + 140 + 10 + 10,
+ .vdisplay = 2048,
+ .vsync_start = 2048 + 20,
+ .vsync_end = 2048 + 20 + 2,
+ .vtotal = 2048 + 20 + 2 + 10,
+ .vrefresh = 60,
+};
+
+static const struct panel_init_cmd innolux_p097pfg_ssd2858_init_cmds[] = {
+ /* SSD2858 config */
+ _INIT_CMD(0xff, 0x00),
+ /* LOCKCNT=0x1f4, MRX=0, POSTDIV=1 (/2), MULT=0x49
+ * 27 Mhz => 985.5 Mhz
+ */
+ _INIT_CMD(0x00, 0x08, 0x01, 0xf4, 0x01, 0x49),
+ /* MTXDIV=1, SYSDIV=3 (=> 4) */
+ _INIT_CMD(0x00, 0x0c, 0x00, 0x00, 0x00, 0x03),
+ /* MTXVPF=24bpp, MRXLS=4 lanes, MRXVB=bypass, MRXECC=1, MRXEOT=1
+ * MRXEE=1
+ */
+ _INIT_CMD(0x00, 0x14, 0x0c, 0x3d, 0x80, 0x0f),
+ _INIT_CMD(0x00, 0x20, 0x15, 0x92, 0x56, 0x7d),
+ _INIT_CMD(0x00, 0x24, 0x00, 0x00, 0x30, 0x00),
+
+ _INIT_CMD(0x10, 0x08, 0x01, 0x20, 0x08, 0x45),
+ _INIT_CMD(0x10, 0x1c, 0x00, 0x00, 0x00, 0x00),
+ _INIT_CMD(0x20, 0x0c, 0x00, 0x00, 0x00, 0x04),
+ /* Pixel clock 985.5 Mhz * 0x49/0x4b = 959 Mhz */
+ _INIT_CMD(0x20, 0x10, 0x00, 0x4b, 0x00, 0x49),
+ _INIT_CMD(0x20, 0xa0, 0x00, 0x00, 0x00, 0x00),
+ /* EOT=1, LPE = 0, LSOUT=4 lanes, LPD=25 */
+ _INIT_CMD(0x60, 0x08, 0x00, 0xd9, 0x00, 0x08),
+ _INIT_CMD(0x60, 0x14, 0x01, 0x00, 0x01, 0x06),
+ /* DSI0 enable (default: probably not needed) */
+ _INIT_CMD(0x60, 0x80, 0x00, 0x00, 0x00, 0x0f),
+ /* DSI1 enable */
+ _INIT_CMD(0x60, 0xa0, 0x00, 0x00, 0x00, 0x0f),
+
+ /* HSA=0x18, VSA=0x02, HBP=0x50, VBP=0x0c */
+ _INIT_CMD(0x60, 0x0c, 0x0c, 0x50, 0x02, 0x18),
+ /* VACT= 0x800 (2048), VFP= 0x14, HFP=0x50 */
+ _INIT_CMD(0x60, 0x10, 0x08, 0x00, 0x14, 0x50),
+ /* HACT=0x300 (768) */
+ _INIT_CMD(0x60, 0x84, 0x00, 0x00, 0x03, 0x00),
+ _INIT_CMD(0x60, 0xa4, 0x00, 0x00, 0x03, 0x00),
+
+ /* Take panel out of sleep. */
+ _INIT_CMD(0xff, 0x01),
+ _INIT_CMD(0x11),
+ _INIT_CMD(0x29),
+ _INIT_CMD(0xff, 0x00),
+
+ {},
+};
+
+static const struct panel_desc innolux_p097pfg_ssd2858_panel_desc = {
+ .mode = &innolux_p097pfg_ssd2858_mode,
+ .bpc = 8,
+ .size = {
+ .width = 147,
+ .height = 196,
+ },
+ .flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
+ MIPI_DSI_MODE_LPM,
+ .format = MIPI_DSI_FMT_RGB888,
+ .init_cmds = innolux_p097pfg_ssd2858_init_cmds,
+ .lanes = 4,
+ .supply_names = innolux_p097pfg_ssd2858_supply_names,
+ .num_supplies = ARRAY_SIZE(innolux_p097pfg_ssd2858_supply_names),
+ .sleep_mode_delay = 100, /* T15 */
+};
+
static int innolux_panel_get_modes(struct drm_panel *panel)
{
struct innolux_panel *innolux = to_innolux_panel(panel);
@@ -451,6 +549,9 @@ static const struct of_device_id innolux_of_match[] = {
{ .compatible = "innolux,p097pfg",
.data = &innolux_p097pfg_panel_desc
},
+ { .compatible = "innolux,p097pfg_ssd2858",
+ .data = &innolux_p097pfg_ssd2858_panel_desc
+ },
{ }
};
MODULE_DEVICE_TABLE(of, innolux_of_match);
Add driver to setup P097PFZ behing SSD2858 (4 to 8 lanes bridge). Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> --- drivers/gpu/drm/panel/panel-innolux-p079zca.c | 103 +++++++++++++++++- 1 file changed, 102 insertions(+), 1 deletion(-)