From patchwork Wed Sep 18 17:31:37 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krzysztof Kozlowski X-Patchwork-Id: 11150909 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 42A463AC5 for ; Wed, 18 Sep 2019 17:32:34 +0000 (UTC) Received: from gabe.freedesktop.org (gabe.freedesktop.org [131.252.210.177]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 2AF3921A4C for ; Wed, 18 Sep 2019 17:32:34 +0000 (UTC) DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 2AF3921A4C Authentication-Results: mail.kernel.org; dmarc=fail (p=none dis=none) header.from=kernel.org Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=dri-devel-bounces@lists.freedesktop.org Received: from gabe.freedesktop.org (localhost [127.0.0.1]) by gabe.freedesktop.org (Postfix) with ESMTP id 5BC076F5BD; Wed, 18 Sep 2019 17:32:33 +0000 (UTC) X-Original-To: dri-devel@lists.freedesktop.org Delivered-To: dri-devel@lists.freedesktop.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by gabe.freedesktop.org (Postfix) with ESMTPS id 81CFE6F5BD for ; Wed, 18 Sep 2019 17:32:31 +0000 (UTC) Received: from localhost.localdomain (unknown [194.230.155.145]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPSA id 0D71221927; Wed, 18 Sep 2019 17:32:25 +0000 (UTC) From: Krzysztof Kozlowski To: Rob Herring , Mark Rutland , Thierry Reding , Matt Mackall , Herbert Xu , Wim Van Sebroeck , Guenter Roeck , linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org, linux-leds@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org, linux-pwm@vger.kernel.org, linux-tegra@vger.kernel.org, bcm-kernel-feedback-list@broadcom.com, linux-rpi-kernel@lists.infradead.org, linux-amlogic@lists.infradead.org, linux-mediatek@lists.infradead.org, linux-rockchip@lists.infradead.org, linux-riscv@lists.infradead.org, linux-stm32@st-md-mailman.stormreply.com, linux-crypto@vger.kernel.org, linux-watchdog@vger.kernel.org Subject: [PATCH v2 4/8] dt-bindings: memory-controllers: Convert Samsung Exynos SROM bindings to json-schema Date: Wed, 18 Sep 2019 19:31:37 +0200 Message-Id: <20190918173141.4314-4-krzk@kernel.org> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20190918173141.4314-1-krzk@kernel.org> References: <20190918173141.4314-1-krzk@kernel.org> X-Mailman-Original-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=default; t=1568827951; bh=TBN5rIG3E121IMHkSrsLKM0ttmkZlIGjy8Mb0Alnr2E=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=fjjw5xql6I5HcW6gX8TfXmC+EZWmaIAAquqmny3vaz+f84Sjkk0yHJy0LE8H7ZUX2 y7Fcw+0k1ciNDrte9YZVLF7tyUnql3LcOve3Ps4wE9XSwAB8H0Ti0vYY7D9uTWDHa/ GK5Xf6mtjT0yzXqCHN6Drr2cFsPOAMLePVUKF0ik= X-BeenThere: dri-devel@lists.freedesktop.org X-Mailman-Version: 2.1.23 Precedence: list List-Id: Direct Rendering Infrastructure - Development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Krzysztof Kozlowski MIME-Version: 1.0 Errors-To: dri-devel-bounces@lists.freedesktop.org Sender: "dri-devel" Convert Samsung Exynos SROM controller bindings to DT schema format using json-schema. Signed-off-by: Krzysztof Kozlowski --- Changes since v1: 1. Indent example with four spaces (more readable), 2. Split examples into two, 3. Fix pattern for subnode name, 4. Remove checks for #address-cells-ranges-#size-cells, 5. Add "additionalProperties" so the wrongly named subnodes would be matched. --- .../memory-controllers/exynos-srom.txt | 79 ----------- .../memory-controllers/exynos-srom.yaml | 128 ++++++++++++++++++ 2 files changed, 128 insertions(+), 79 deletions(-) delete mode 100644 Documentation/devicetree/bindings/memory-controllers/exynos-srom.txt create mode 100644 Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml diff --git a/Documentation/devicetree/bindings/memory-controllers/exynos-srom.txt b/Documentation/devicetree/bindings/memory-controllers/exynos-srom.txt deleted file mode 100644 index f633b5d0f8ca..000000000000 --- a/Documentation/devicetree/bindings/memory-controllers/exynos-srom.txt +++ /dev/null @@ -1,79 +0,0 @@ -SAMSUNG Exynos SoCs SROM Controller driver. - -Required properties: -- compatible : Should contain "samsung,exynos4210-srom". - -- reg: offset and length of the register set - -Optional properties: -The SROM controller can be used to attach external peripherals. In this case -extra properties, describing the bus behind it, should be specified as below: - -- #address-cells: Must be set to 2 to allow device address translation. - Address is specified as (bank#, offset). - -- #size-cells: Must be set to 1 to allow device size passing - -- ranges: Must be set up to reflect the memory layout with four integer values - per bank: - 0 - -Sub-nodes: -The actual device nodes should be added as subnodes to the SROMc node. These -subnodes, in addition to regular device specification, should contain the following -properties, describing configuration of the relevant SROM bank: - -Required properties: -- reg: bank number, base address (relative to start of the bank) and size of - the memory mapped for the device. Note that base address will be - typically 0 as this is the start of the bank. - -- samsung,srom-timing : array of 6 integers, specifying bank timings in the - following order: Tacp, Tcah, Tcoh, Tacc, Tcos, Tacs. - Each value is specified in cycles and has the following - meaning and valid range: - Tacp : Page mode access cycle at Page mode (0 - 15) - Tcah : Address holding time after CSn (0 - 15) - Tcoh : Chip selection hold on OEn (0 - 15) - Tacc : Access cycle (0 - 31, the actual time is N + 1) - Tcos : Chip selection set-up before OEn (0 - 15) - Tacs : Address set-up before CSn (0 - 15) - -Optional properties: -- reg-io-width : data width in bytes (1 or 2). If omitted, default of 1 is used. - -- samsung,srom-page-mode : if page mode is set, 4 data page mode will be configured, - else normal (1 data) page mode will be set. - -Example: basic definition, no banks are configured - memory-controller@12570000 { - compatible = "samsung,exynos4210-srom"; - reg = <0x12570000 0x14>; - }; - -Example: SROMc with SMSC911x ethernet chip on bank 3 - memory-controller@12570000 { - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0x04000000 0x20000 // Bank0 - 1 0 0x05000000 0x20000 // Bank1 - 2 0 0x06000000 0x20000 // Bank2 - 3 0 0x07000000 0x20000>; // Bank3 - - compatible = "samsung,exynos4210-srom"; - reg = <0x12570000 0x14>; - - ethernet@3,0 { - compatible = "smsc,lan9115"; - reg = <3 0 0x10000>; // Bank 3, offset = 0 - phy-mode = "mii"; - interrupt-parent = <&gpx0>; - interrupts = <5 8>; - reg-io-width = <2>; - smsc,irq-push-pull; - smsc,force-internal-phy; - - samsung,srom-page-mode; - samsung,srom-timing = <9 12 1 9 1 1>; - }; - }; diff --git a/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml b/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml new file mode 100644 index 000000000000..cdfe3f7f0ea9 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml @@ -0,0 +1,128 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/exynos-srom.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos SoC SROM Controller driver + +maintainers: + - Krzysztof Kozlowski + +description: |+ + The SROM controller can be used to attach external peripherals. In this case + extra properties, describing the bus behind it, should be specified. + +properties: + compatible: + items: + - const: samsung,exynos4210-srom + + reg: + maxItems: 1 + + "#address-cells": + const: 2 + + "#size-cells": + const: 1 + + ranges: + description: | + Reflects the memory layout with four integer values per bank. Format: + 0 + Up to four banks are supported. + +patternProperties: + "^.*@[0-3],[a-f0-9]+$": + type: object + description: + The actual device nodes should be added as subnodes to the SROMc node. + These subnodes, in addition to regular device specification, should + contain the following properties, describing configuration + of the relevant SROM bank. + + properties: + reg: + description: + Bank number, base address (relative to start of the bank) and size + of the memory mapped for the device. Note that base address will be + typically 0 as this is the start of the bank. + maxItems: 1 + + reg-io-width: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [1, 2] + description: + Data width in bytes (1 or 2). If omitted, default of 1 is used. + + samsung,srom-page-mode: + description: + If page mode is set, 4 data page mode will be configured, + else normal (1 data) page mode will be set. + type: boolean + + samsung,srom-timing: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - items: + minItems: 6 + maxItems: 6 + description: | + Array of 6 integers, specifying bank timings in the following order: + Tacp, Tcah, Tcoh, Tacc, Tcos, Tacs. + Each value is specified in cycles and has the following meaning + and valid range: + Tacp: Page mode access cycle at Page mode (0 - 15) + Tcah: Address holding time after CSn (0 - 15) + Tcoh: Chip selection hold on OEn (0 - 15) + Tacc: Access cycle (0 - 31, the actual time is N + 1) + Tcos: Chip selection set-up before OEn (0 - 15) + Tacs: Address set-up before CSn (0 - 15) + + required: + - reg + - samsung,srom-timing + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + // Example: basic definition, no banks are configured + memory-controller@12560000 { + compatible = "samsung,exynos4210-srom"; + reg = <0x12560000 0x14>; + }; + + - | + // Example: SROMc with SMSC911x ethernet chip on bank 3 + memory-controller@12570000 { + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x04000000 0x20000 // Bank0 + 1 0 0x05000000 0x20000 // Bank1 + 2 0 0x06000000 0x20000 // Bank2 + 3 0 0x07000000 0x20000>; // Bank3 + + compatible = "samsung,exynos4210-srom"; + reg = <0x12570000 0x14>; + + ethernet@3,0 { + compatible = "smsc,lan9115"; + reg = <3 0 0x10000>; // Bank 3, offset = 0 + phy-mode = "mii"; + interrupt-parent = <&gpx0>; + interrupts = <5 8>; + reg-io-width = <2>; + smsc,irq-push-pull; + smsc,force-internal-phy; + + samsung,srom-page-mode; + samsung,srom-timing = <9 12 1 9 1 1>; + }; + };