@@ -76,7 +76,7 @@ config JUMP_LABEL
depends on HAVE_ARCH_JUMP_LABEL
depends on CC_HAS_ASM_GOTO
help
- This option enables a transparent branch optimization that
+ This option enables a transparent branch optimization that
makes certain almost-always-true or almost-always-false branch
conditions even cheaper to execute within the kernel.
@@ -84,7 +84,7 @@ config JUMP_LABEL
scheduler functionality, networking code and KVM have such
branches and include support for this optimization technique.
- If it is detected that the compiler has support for "asm goto",
+ If it is detected that the compiler has support for "asm goto",
the kernel will compile such branches with just a nop
instruction. When the condition flag is toggled to true, the
nop will be converted to a jump instruction to execute the
@@ -545,7 +545,7 @@ config NR_CPUS
default "4" if !ALPHA_GENERIC && !ALPHA_MARVEL
help
MARVEL support can handle a maximum of 32 CPUs, all the others
- with working support have a maximum of 4 CPUs.
+ with working support have a maximum of 4 CPUs.
config ARCH_DISCONTIGMEM_ENABLE
bool "Discontiguous Memory Support"
@@ -274,7 +274,7 @@ choice
select DEBUG_UART_8250
help
Say Y here if you want the debug print routines to direct
- their output to the CNS3xxx UART0.
+ their output to the CNS3xxx UART0.
config DEBUG_DAVINCI_DA8XX_UART1
bool "Kernel low-level debugging on DaVinci DA8XX using UART1"
@@ -828,7 +828,7 @@ choice
select DEBUG_UART_8250
help
Say Y here if you want kernel low-level debugging support
- on Rockchip RV1108 based platforms.
+ on Rockchip RV1108 based platforms.
config DEBUG_RV1108_UART1
bool "Kernel low-level debugging messages via Rockchip RV1108 UART1"
@@ -126,10 +126,10 @@ config MACH_MICRO9S
Contec Micro9-Slim board.
config MACH_SIM_ONE
- bool "Support Simplemachines Sim.One board"
- help
- Say 'Y' here if you want your kernel to support the
- Simplemachines Sim.One board.
+ bool "Support Simplemachines Sim.One board"
+ help
+ Say 'Y' here if you want your kernel to support the
+ Simplemachines Sim.One board.
config MACH_SNAPPER_CL15
bool "Support Bluewater Systems Snapper CL15 Module"
@@ -31,7 +31,7 @@ config ARCH_HIP01
select HAVE_ARM_TWD if SMP
select ARM_GLOBAL_TIMER
help
- Support for Hisilicon HIP01 SoC family
+ Support for Hisilicon HIP01 SoC family
config ARCH_HIP04
bool "Hisilicon HiP04 Cortex A15 family"
@@ -214,14 +214,14 @@ config IXP4XX_INDIRECT_PCI
bool "Use indirect PCI memory access"
depends on PCI
help
- IXP4xx provides two methods of accessing PCI memory space:
-
- 1) A direct mapped window from 0x48000000 to 0x4BFFFFFF (64MB).
- To access PCI via this space, we simply ioremap() the BAR
- into the kernel and we can use the standard read[bwl]/write[bwl]
- macros. This is the preferred method due to speed but it
- limits the system to just 64MB of PCI memory. This can be
- problematic if using video cards and other memory-heavy devices.
+ IXP4xx provides two methods of accessing PCI memory space:
+
+ 1) A direct mapped window from 0x48000000 to 0x4BFFFFFF (64MB).
+ To access PCI via this space, we simply ioremap() the BAR
+ into the kernel and we can use the standard read[bwl]/write[bwl]
+ macros. This is the preferred method due to speed but it
+ limits the system to just 64MB of PCI memory. This can be
+ problematic if using video cards and other memory-heavy devices.
2) If > 64MB of memory space is required, the IXP4xx can be
configured to use indirect registers to access the whole PCI
@@ -150,7 +150,7 @@ config CPU_MMP2
Select code specific to MMP2. MMP2 is ARMv7 compatible.
config USB_EHCI_MV_U2O
- bool "EHCI support for PXA USB OTG controller"
+ bool "EHCI support for PXA USB OTG controller"
depends on USB_EHCI_MV
help
Enables support for OTG controller which can be switched to host mode.
@@ -66,8 +66,8 @@ config MACH_OMAP_INNOVATOR
bool "TI Innovator"
depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX)
help
- TI OMAP 1510 or 1610 Innovator board support. Say Y here if you
- have such a board.
+ TI OMAP 1510 or 1610 Innovator board support. Say Y here if you
+ have such a board.
config MACH_OMAP_H2
bool "TI H2 Support"
@@ -94,7 +94,7 @@ config MACH_OMAP_OSK
depends on ARCH_OMAP1 && ARCH_OMAP16XX
help
TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here
- if you have such a board.
+ if you have such a board.
config OMAP_OSK_MISTRAL
bool "Mistral QVGA board Support"
@@ -180,10 +180,10 @@ config MACH_OMAP_GENERIC
bool "Generic OMAP board"
depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX)
help
- Support for generic OMAP-1510, 1610 or 1710 board with
- no FPGA. Can be used as template for porting Linux to
- custom OMAP boards. Say Y here if you have a custom
- board.
+ Support for generic OMAP-1510, 1610 or 1710 board with
+ no FPGA. Can be used as template for porting Linux to
+ custom OMAP boards. Say Y here if you have a custom
+ board.
endmenu
@@ -22,7 +22,7 @@ config ARCH_ATLAS6
default y
select SIRF_IRQ
help
- Support for CSR SiRFSoC ARM Cortex A9 Platform
+ Support for CSR SiRFSoC ARM Cortex A9 Platform
config ARCH_ATLAS7
bool "CSR SiRFSoC ATLAS7 ARM Cortex A7 Platform"
@@ -32,7 +32,7 @@ config ARCH_ATLAS7
select HAVE_ARM_SCU if SMP
select HAVE_SMP
help
- Support for CSR SiRFSoC ARM Cortex A7 Platform
+ Support for CSR SiRFSoC ARM Cortex A7 Platform
config ARCH_PRIMA2
bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform"
@@ -41,7 +41,7 @@ config ARCH_PRIMA2
select ZONE_DMA
select PRIMA2_TIMER
help
- Support for CSR SiRFSoC ARM Cortex A9 Platform
+ Support for CSR SiRFSoC ARM Cortex A9 Platform
config SIRF_IRQ
bool
@@ -141,8 +141,8 @@ config S3C2410_CPUFREQ_UTILS
bool
depends on ARM_S3C24XX_CPUFREQ
help
- Internal node to select timing code that is common to the s3c2410
- and s3c2440/s3c244 cpu frequency support.
+ Internal node to select timing code that is common to the s3c2410
+ and s3c2440/s3c244 cpu frequency support.
# cpu frequency support common to s3c2412, s3c2413 and s3c2442
@@ -202,7 +202,7 @@ config SMDK6410_SD_CH0
bool "Use channel 0 only"
depends on MACH_SMDK6410
help
- Select CON7 (channel 0) as the MMC/SD slot, as
+ Select CON7 (channel 0) as the MMC/SD slot, as
at least some SMDK6410 boards come with the
resistors fitted so that the card detects for
channels 0 and 1 are the same.
@@ -211,7 +211,7 @@ config SMDK6410_SD_CH1
bool "Use channel 1 only"
depends on MACH_SMDK6410
help
- Select CON6 (channel 1) as the MMC/SD slot, as
+ Select CON6 (channel 1) as the MMC/SD slot, as
at least some SMDK6410 boards come with the
resistors fitted so that the card detects for
channels 0 and 1 are the same.
@@ -257,7 +257,7 @@ config MACH_NCP
select S3C_DEV_HSMMC1
select S3C_DEV_I2C1
help
- Machine support for the Samsung NCP
+ Machine support for the Samsung NCP
config MACH_HMT
bool "Airgoo HMT"
@@ -250,7 +250,7 @@ config S3C_PM_DEBUG_LED_SMDK
bool "SMDK LED suspend/resume debugging"
depends on PM && (MACH_SMDK6410)
help
- Say Y here to enable the use of the SMDK LEDs on the baseboard
+ Say Y here to enable the use of the SMDK LEDs on the baseboard
for debugging of the state of the suspend and resume process.
Note, this currently only works for S3C64XX based SMDK boards.
@@ -262,7 +262,7 @@ config GENERIC_HWEIGHT
def_bool y
config GENERIC_CSUM
- def_bool y
+ def_bool y
config GENERIC_CALIBRATE_DELAY
def_bool y
@@ -832,7 +832,7 @@ config ARM64_PA_BITS
config CPU_BIG_ENDIAN
bool "Build big-endian kernel"
help
- Say Y if you plan on running a kernel in big-endian mode.
+ Say Y if you plan on running a kernel in big-endian mode.
config SCHED_MC
bool "Multi-core scheduler support"
@@ -1593,7 +1593,7 @@ config EFI
help
This option provides support for runtime services provided
by UEFI firmware (such as non-volatile variables, realtime
- clock, and platform reset). A UEFI stub is also provided to
+ clock, and platform reset). A UEFI stub is also provided to
allow the kernel to be booted as an EFI application. This
is only useful on systems that have UEFI firmware.
@@ -8,7 +8,7 @@ config ARM64_PTDUMP_DEBUGFS
depends on DEBUG_KERNEL
select ARM64_PTDUMP_CORE
select DEBUG_FS
- help
+ help
Say Y here if you want to show the kernel pagetable layout in a
debugfs file. This information is only useful for kernel developers
who are working in architecture specific areas of the kernel.
@@ -1,6 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
config H8300
- def_bool y
+ def_bool y
select ARCH_32BIT_OFF_T
select ARCH_HAS_BINFMT_FLAT
select BINFMT_FLAT_ARGVP_ENVP_ON_STACK
@@ -38,7 +38,7 @@ config NO_IOPORT_MAP
def_bool y
config GENERIC_CSUM
- def_bool y
+ def_bool y
config HZ
int
@@ -90,11 +90,11 @@ config H8S_SIM
endchoice
config H8300_BUILTIN_DTB
- string "Builtin DTB"
+ string "Builtin DTB"
default ""
config OFFSET
- hex "Load offset"
+ hex "Load offset"
default 0
endmenu
@@ -66,6 +66,6 @@ endif
if !MMU
config ISA_DMA_API
- def_bool !M5272
+ def_bool !M5272
endif
@@ -12,16 +12,16 @@ config EARLY_PRINTK
bool "Early printk"
depends on !(SUN3 || M68000 || COLDFIRE)
help
- Write kernel log output directly to a serial port.
- Where implemented, output goes to the framebuffer as well.
- PROM console functionality on Sun 3x is not affected by this option.
+ Write kernel log output directly to a serial port.
+ Where implemented, output goes to the framebuffer as well.
+ PROM console functionality on Sun 3x is not affected by this option.
- Pass "earlyprintk" on the kernel command line to get a
- boot console.
+ Pass "earlyprintk" on the kernel command line to get a
+ boot console.
- This is useful for kernel debugging when your machine crashes very
- early, i.e. before the normal console driver is loaded.
- You should normally say N here, unless you want to debug such a crash.
+ This is useful for kernel debugging when your machine crashes very
+ early, i.e. before the normal console driver is loaded.
+ You should normally say N here, unless you want to debug such a crash.
if !MMU
@@ -269,10 +269,10 @@ config AMCORE
Support for the Sysam AMCORE open-hardware generic board.
config STMARK2
- bool "Sysam stmark2 board support"
- depends on M5441x
- help
- Support for the Sysam stmark2 open-hardware generic board.
+ bool "Sysam stmark2 board support"
+ depends on M5441x
+ help
+ Support for the Sysam stmark2 open-hardware generic board.
config FIREBEE
bool "FireBee board support"
@@ -13,8 +13,8 @@ config FPU
default n
help
If FPU ISA is used in user space, this configuration shall be Y to
- enable required support in kerenl such as fpu context switch and
- fpu exception handler.
+ enable required support in kerenl such as fpu context switch and
+ fpu exception handler.
If no FPU ISA is used in user space, say N.
@@ -24,7 +24,7 @@ config LAZY_FPU
default y
help
Say Y here to enable the lazy FPU scheme. The lazy FPU scheme can
- enhance system performance by reducing the context switch
+ enhance system performance by reducing the context switch
frequency of the FPU register.
For nomal case, say Y.
@@ -75,11 +75,11 @@ choice
if its cache way size is larger than page size. You can specify the
CPU type direcly or choose CPU_V3 if unsure.
- A kernel built for N10 is able to run on N15, D15, N13, N10 or D10.
- A kernel built for N15 is able to run on N15 or D15.
- A kernel built for D10 is able to run on D10 or D15.
- A kernel built for D15 is able to run on D15.
- A kernel built for N13 is able to run on N15, N13 or D15.
+ A kernel built for N10 is able to run on N15, D15, N13, N10 or D10.
+ A kernel built for N15 is able to run on N15 or D15.
+ A kernel built for D10 is able to run on D10 or D15.
+ A kernel built for D15 is able to run on D15.
+ A kernel built for N13 is able to run on N15, N13 or D15.
config CPU_N15
bool "AndesCore N15"
@@ -173,7 +173,7 @@ config HIGHMEM
config CACHE_L2
bool "Support L2 cache"
- default y
+ default y
help
Say Y here to enable L2 cache if your SoC are integrated with L2CC.
If unsure, say N.
@@ -13,7 +13,7 @@ config OPENRISC
select IRQ_DOMAIN
select HANDLE_DOMAIN_IRQ
select GPIOLIB
- select HAVE_ARCH_TRACEHOOK
+ select HAVE_ARCH_TRACEHOOK
select SPARSE_IRQ
select GENERIC_IRQ_CHIP
select GENERIC_IRQ_PROBE
@@ -51,12 +51,12 @@ config NO_IOPORT_MAP
def_bool y
config TRACE_IRQFLAGS_SUPPORT
- def_bool y
+ def_bool y
# For now, use generic checksum functions
#These can be reimplemented in assembly later if so inclined
config GENERIC_CSUM
- def_bool y
+ def_bool y
config STACKTRACE_SUPPORT
def_bool y
@@ -89,8 +89,8 @@ config DCACHE_WRITETHROUGH
If unsure say N here
config OPENRISC_BUILTIN_DTB
- string "Builtin DTB"
- default ""
+ string "Builtin DTB"
+ default ""
menu "Class II Instructions"
@@ -161,13 +161,13 @@ config OPENRISC_HAVE_SHADOW_GPRS
On a unicore system it's safe to say N here if you are unsure.
config CMDLINE
- string "Default kernel command string"
- default ""
- help
- On some architectures there is currently no way for the boot loader
- to pass arguments to the kernel. For these architectures, you should
- supply some command-line options at build time by entering them
- here.
+ string "Default kernel command string"
+ default ""
+ help
+ On some architectures there is currently no way for the boot loader
+ to pass arguments to the kernel. For these architectures, you should
+ supply some command-line options at build time by entering them
+ here.
menu "Debugging options"
@@ -185,7 +185,7 @@ config OPENRISC_ESR_EXCEPTION_BUG_CHECK
default n
help
This option enables some checks that might expose some problems
- in kernel.
+ in kernel.
Say N if you are unsure.
@@ -122,8 +122,8 @@ config XMON_DEFAULT_RO_MODE
depends on XMON
default y
help
- Operate xmon in read-only mode. The cmdline options 'xmon=rw' and
- 'xmon=ro' override this default.
+ Operate xmon in read-only mode. The cmdline options 'xmon=rw' and
+ 'xmon=ro' override this default.
config DEBUGGER
bool
@@ -222,7 +222,7 @@ config PPC_EARLY_DEBUG_44x
help
Select this to enable early debugging for IBM 44x chips via the
inbuilt serial port. If you enable this, ensure you set
- PPC_EARLY_DEBUG_44x_PHYSLOW below to suit your target board.
+ PPC_EARLY_DEBUG_44x_PHYSLOW below to suit your target board.
config PPC_EARLY_DEBUG_40x
bool "Early serial debugging for IBM/AMCC 40x CPUs"
@@ -325,7 +325,7 @@ config PPC_EARLY_DEBUG_44x_PHYSLOW
default "0x40000200"
help
You probably want 0x40000200 for ebony boards and
- 0x40000300 for taishan
+ 0x40000300 for taishan
config PPC_EARLY_DEBUG_44x_PHYSHIGH
hex "EPRN of early debug UART physical address"
@@ -359,9 +359,9 @@ config FAIL_IOMMU
If you are unsure, say N.
config PPC_PTDUMP
- bool "Export kernel pagetable layout to userspace via debugfs"
- depends on DEBUG_KERNEL && DEBUG_FS
- help
+ bool "Export kernel pagetable layout to userspace via debugfs"
+ depends on DEBUG_KERNEL && DEBUG_FS
+ help
This option exports the state of the kernel pagetables to a
debugfs file. This is only useful for kernel developers who are
working in architecture specific areas of the kernel - probably
@@ -390,8 +390,8 @@ config PPC_DEBUG_WX
config PPC_FAST_ENDIAN_SWITCH
bool "Deprecated fast endian-switch syscall"
- depends on DEBUG_KERNEL && PPC_BOOK3S_64
- help
+ depends on DEBUG_KERNEL && PPC_BOOK3S_64
+ help
If you're unsure what this is, say N.
config KASAN_SHADOW_OFFSET
@@ -421,7 +421,7 @@ config PPC_PERF_CTRS
def_bool y
depends on PERF_EVENTS && PPC_HAVE_PMU_SUPPORT
help
- This enables the powerpc-specific perf_event back-end.
+ This enables the powerpc-specific perf_event back-end.
config FORCE_SMP
# Allow platforms to force SMP=y by selecting this
@@ -8,6 +8,6 @@ config SOC_SIFIVE
select CLK_SIFIVE_FU540_PRCI
select SIFIVE_PLIC
help
- This enables support for SiFive SoC platform hardware.
+ This enables support for SiFive SoC platform hardware.
endmenu
@@ -231,7 +231,7 @@ config SH_MIGOR
select REGULATOR_FIXED_VOLTAGE if REGULATOR
help
Select Migo-R if configuring for the SH7722 Migo-R platform
- by Renesas System Solutions Asia Pte. Ltd.
+ by Renesas System Solutions Asia Pte. Ltd.
config SH_AP325RXA
bool "AP-325RXA"
@@ -2,7 +2,7 @@
menu "Memory management options"
config MMU
- bool "Support for memory management hardware"
+ bool "Support for memory management hardware"
depends on !CPU_SH2
default y
help
@@ -153,7 +153,7 @@ config KERNEL_STACK_ORDER
It is possible to reduce the stack to 1 for 64BIT and 0 for 32BIT on
older (pre-2017) CPUs. It is not recommended on newer CPUs due to the
increase in the size of the state which needs to be saved when handling
- signals.
+ signals.
config MMAPPER
tristate "iomem emulation driver"
@@ -806,9 +806,9 @@ config KVM_GUEST
timing infrastructure such as time of day, and system time
config ARCH_CPUIDLE_HALTPOLL
- def_bool n
- prompt "Disable host haltpoll when loading haltpoll driver"
- help
+ def_bool n
+ prompt "Disable host haltpoll when loading haltpoll driver"
+ help
If virtualized under KVM, disable host haltpoll.
config PVH
@@ -892,11 +892,11 @@ config APB_TIMER
select DW_APB_TIMER
depends on X86_INTEL_MID && SFI
help
- APB timer is the replacement for 8254, HPET on X86 MID platforms.
- The APBT provides a stable time base on SMP
- systems, unlike the TSC, but it is more expensive to access,
- as it is off-chip. APB timers are always running regardless of CPU
- C states, they are used as per CPU clockevent device when possible.
+ APB timer is the replacement for 8254, HPET on X86 MID platforms.
+ The APBT provides a stable time base on SMP
+ systems, unlike the TSC, but it is more expensive to access,
+ as it is off-chip. APB timers are always running regardless of CPU
+ C states, they are used as per CPU clockevent device when possible.
# Mark as expert because too many people got it wrong.
# The code disables itself when not needed.
@@ -1962,7 +1962,7 @@ config EFI_STUB
depends on EFI && !X86_USE_3DNOW
select RELOCATABLE
---help---
- This kernel feature allows a bzImage to be loaded directly
+ This kernel feature allows a bzImage to be loaded directly
by EFI firmware without the use of a bootloader.
See Documentation/admin-guide/efi-stub.rst for more information.
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- arch/Kconfig | 4 ++-- arch/alpha/Kconfig | 2 +- arch/arm/Kconfig.debug | 4 ++-- arch/arm/mach-ep93xx/Kconfig | 8 ++++---- arch/arm/mach-hisi/Kconfig | 2 +- arch/arm/mach-ixp4xx/Kconfig | 16 ++++++++-------- arch/arm/mach-mmp/Kconfig | 2 +- arch/arm/mach-omap1/Kconfig | 14 +++++++------- arch/arm/mach-prima2/Kconfig | 6 +++--- arch/arm/mach-s3c24xx/Kconfig | 4 ++-- arch/arm/mach-s3c64xx/Kconfig | 6 +++--- arch/arm/plat-samsung/Kconfig | 2 +- arch/arm64/Kconfig | 6 +++--- arch/arm64/Kconfig.debug | 2 +- arch/h8300/Kconfig | 4 ++-- arch/h8300/Kconfig.cpu | 4 ++-- arch/m68k/Kconfig.bus | 2 +- arch/m68k/Kconfig.debug | 16 ++++++++-------- arch/m68k/Kconfig.machine | 8 ++++---- arch/nds32/Kconfig.cpu | 18 +++++++++--------- arch/openrisc/Kconfig | 26 +++++++++++++------------- arch/powerpc/Kconfig.debug | 18 +++++++++--------- arch/powerpc/platforms/Kconfig.cputype | 2 +- arch/riscv/Kconfig.socs | 2 +- arch/sh/boards/Kconfig | 2 +- arch/sh/mm/Kconfig | 2 +- arch/um/Kconfig | 2 +- arch/x86/Kconfig | 18 +++++++++--------- 28 files changed, 101 insertions(+), 101 deletions(-)